drm/i915/cnl: Enable loadgen_select bit for vswing sequence
authorClint Taylor <clinton.a.taylor@intel.com>
Fri, 9 Jun 2017 22:26:09 +0000 (15:26 -0700)
committerRodrigo Vivi <rodrigo.vivi@intel.com>
Mon, 12 Jun 2017 16:44:17 +0000 (09:44 -0700)
vswing programming sequence step 2 requires the Loadgen_select bit to
be set in PORT_TX_DW4 lane reigsters per table defined by Bit rate and
lane width. Implemented the change that was marked as FIXME in the
driver.

v2: (Rodrigo) checkpatch fixes.

Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-12-git-send-email-rodrigo.vivi@intel.com
drivers/gpu/drm/i915/intel_ddi.c

index 9eb2940fc889fe036f2dca528b54896e3a8ee3fe..721c2e2c12a30d8527aae4a9f18fb3a7dc7ea46c 100644 (file)
@@ -1846,10 +1846,24 @@ static void cnl_ddi_vswing_program(struct drm_i915_private *dev_priv,
        I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val);
 }
 
-static void cnl_ddi_vswing_sequence(struct drm_i915_private *dev_priv,
-                                   u32 level, enum port port, int type)
+static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder, u32 level)
 {
+       struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+       struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
+       enum port port = intel_ddi_get_encoder_port(encoder);
+       int type = encoder->type;
+       int width = 0;
+       int rate = 0;
        u32 val;
+       int ln = 0;
+
+       if ((intel_dp) && (type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP)) {
+               width = intel_dp->lane_count;
+               rate = intel_dp->link_rate;
+       } else {
+               width = 4;
+               /* Rate is always < than 6GHz for HDMI */
+       }
 
        /*
         * 1. If port type is eDP or DP,
@@ -1865,8 +1879,21 @@ static void cnl_ddi_vswing_sequence(struct drm_i915_private *dev_priv,
 
        /* 2. Program loadgen select */
        /*
-        * FIXME: Program PORT_TX_DW4_LN depending on Bit rate and used lanes
+        * Program PORT_TX_DW4_LN depending on Bit rate and used lanes
+        * <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1)
+        * <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0)
+        * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
         */
+       for (ln = 0; ln <= 3; ln++) {
+               val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
+               val &= ~LOADGEN_SELECT;
+
+               if (((rate < 600000) && (width == 4) && (ln >= 1))  ||
+                   ((rate < 600000) && (width < 4) && ((ln == 1) || (ln == 2)))) {
+                       val |= LOADGEN_SELECT;
+               }
+               I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
+       }
 
        /* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
        val = I915_READ(CNL_PORT_CL1CM_DW5);
@@ -1920,7 +1947,7 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
        else if (IS_GEN9_LP(dev_priv))
                bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type);
        else if (IS_CANNONLAKE(dev_priv)) {
-               cnl_ddi_vswing_sequence(dev_priv, level, port, encoder->type);
+               cnl_ddi_vswing_sequence(encoder, level);
                /* DDI_BUF_CTL bits 27:24 are reserved on CNL */
                return 0;
        }
@@ -2022,8 +2049,7 @@ static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
                bxt_ddi_vswing_sequence(dev_priv, level, port,
                                        INTEL_OUTPUT_HDMI);
        else if (IS_CANNONLAKE(dev_priv))
-               cnl_ddi_vswing_sequence(dev_priv, level, port,
-                                       INTEL_OUTPUT_HDMI);
+               cnl_ddi_vswing_sequence(encoder, level);
 
        intel_hdmi->set_infoframes(drm_encoder,
                                   has_hdmi_sink,