pm2301: Clean-up PM2301 interrupt management

Fix the way interrupts are handled within the PM2301 charging driver.

Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Olivier CLERGEAUD <olivier.clergeaud@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Michel JAOUEN <michel.jaouen@stericsson.com>
Tested-by: Michel JAOUEN <michel.jaouen@stericsson.com>

diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index e7a360a0426f7b4440622d610c38194dc8731544..7d2ec541ba7f2d74c2b41ca2647b7d622954f776 100644 (file)
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -224,7 +224,7 @@ static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
 {
        dev_dbg(pm2->dev, "battery disconnected\n");
 
-       return (pm2xxx_charging_disable_mngt(pm2));
+       return 0;
 }
 
 static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
@@ -275,17 +275,17 @@ static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
        return 0;
 }
 
-static int pm2_int_reg0(struct pm2xxx_charger *pm2)
+static int pm2_int_reg0(void *pm2_data, int val)
 {
+       struct pm2xxx_charger *pm2 = pm2_data;
        int ret = 0;
 
-       if (pm2->pm2_int[0] &
-                       (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
-               ret = pm2xxx_charger_vbat_lsig_mngt(pm2, pm2->pm2_int[0] &
+       if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
+               ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
                        (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
        }
 
-       if (pm2->pm2_int[0] & PM2XXX_INT1_ITVBATDISCONNECT) {
+       if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
                ret = pm2xxx_charger_bat_disc_mngt(pm2,
                                PM2XXX_INT1_ITVBATDISCONNECT);
        }
@@ -293,21 +293,21 @@ static int pm2_int_reg0(struct pm2xxx_charger *pm2)
        return ret;
 }
 
-static int pm2_int_reg1(struct pm2xxx_charger *pm2)
+static int pm2_int_reg1(void *pm2_data, int val)
 {
+       struct pm2xxx_charger *pm2 = pm2_data;
        int ret = 0;
 
-       if (pm2->pm2_int[1] &
-               (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
+       if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
                dev_dbg(pm2->dev , "Main charger plugged\n");
-               ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, pm2->pm2_int[1] &
+               ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
                        (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
        }
 
-       if (pm2->pm2_int[1] &
+       if (val &
                (PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
                dev_dbg(pm2->dev , "Main charger unplugged\n");
-               ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, pm2->pm2_int[1] &
+               ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
                                                (PM2XXX_INT2_ITVPWR1UNPLUG |
                                                PM2XXX_INT2_ITVPWR2UNPLUG));
        }
@@ -315,14 +315,15 @@ static int pm2_int_reg1(struct pm2xxx_charger *pm2)
        return ret;
 }
 
-static int pm2_int_reg2(struct pm2xxx_charger *pm2)
+static int pm2_int_reg2(void *pm2_data, int val)
 {
+       struct pm2xxx_charger *pm2 = pm2_data;
        int ret = 0;
 
-       if (pm2->pm2_int[2] & PM2XXX_INT3_ITAUTOTIMEOUTWD)
-               ret = pm2xxx_charger_wd_exp_mngt(pm2, pm2->pm2_int[2]);
+       if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
+               ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
 
-       if (pm2->pm2_int[2] & (PM2XXX_INT3_ITCHPRECHARGEWD |
+       if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
                                PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
                dev_dbg(pm2->dev,
                        "Watchdog occured for precharge, CC and CV charge\n");
@@ -331,64 +332,65 @@ static int pm2_int_reg2(struct pm2xxx_charger *pm2)
        return ret;
 }
 
-static int pm2_int_reg3(struct pm2xxx_charger *pm2)
+static int pm2_int_reg3(void *pm2_data, int val)
 {
+       struct pm2xxx_charger *pm2 = pm2_data;
        int ret = 0;
 
-       if (pm2->pm2_int[3] & (PM2XXX_INT4_ITCHARGINGON)) {
+       if (val & (PM2XXX_INT4_ITCHARGINGON)) {
                dev_dbg(pm2->dev ,
                        "chargind operation has started\n");
        }
 
-       if (pm2->pm2_int[3] & (PM2XXX_INT4_ITVRESUME)) {
+       if (val & (PM2XXX_INT4_ITVRESUME)) {
                dev_dbg(pm2->dev,
                        "battery discharged down to VResume threshold\n");
        }
 
-       if (pm2->pm2_int[3] & (PM2XXX_INT4_ITBATTFULL)) {
+       if (val & (PM2XXX_INT4_ITBATTFULL)) {
                dev_dbg(pm2->dev , "battery fully detected\n");
        }
 
-       if (pm2->pm2_int[3] & (PM2XXX_INT4_ITCVPHASE)) {
+       if (val & (PM2XXX_INT4_ITCVPHASE)) {
                dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
        }
 
-       if (pm2->pm2_int[3] &
-                       (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
+       if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
                pm2->failure_case = VPWR_OVV;
-               ret = pm2xxx_charger_ovv_mngt(pm2, pm2->pm2_int[3] &
+               ret = pm2xxx_charger_ovv_mngt(pm2, val &
                        (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
                dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
        }
 
-       if (pm2->pm2_int[3] & (PM2XXX_INT4_S_ITBATTEMPCOLD |
+       if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
                                PM2XXX_INT4_S_ITBATTEMPHOT)) {
-               ret = pm2xxx_charger_batt_therm_mngt(pm2,
-                       pm2->pm2_int[3] & (PM2XXX_INT4_S_ITBATTEMPCOLD |
-                                       PM2XXX_INT4_S_ITBATTEMPHOT));
+               ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
+                       (PM2XXX_INT4_S_ITBATTEMPCOLD |
+                       PM2XXX_INT4_S_ITBATTEMPHOT));
                dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
        }
 
        return ret;
 }
 
-static int pm2_int_reg4(struct pm2xxx_charger *pm2)
+static int pm2_int_reg4(void *pm2_data, int val)
 {
+       struct pm2xxx_charger *pm2 = pm2_data;
        int ret = 0;
 
-       if (pm2->pm2_int[4] & PM2XXX_INT5_ITVSYSTEMOVV) {
+       if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
                pm2->failure_case = VSYSTEM_OVV;
-               ret = pm2xxx_charger_ovv_mngt(pm2, pm2->pm2_int[4] &
+               ret = pm2xxx_charger_ovv_mngt(pm2, val &
                                                PM2XXX_INT5_ITVSYSTEMOVV);
                dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
        }
 
-       if (pm2->pm2_int[4] & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+       if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
                                PM2XXX_INT5_ITTHERMALWARNINGRISE |
                                PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
                                PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
                dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
-               ret = pm2xxx_charger_die_therm_mngt(pm2, pm2->pm2_int[4] &
+               ret = pm2xxx_charger_die_therm_mngt(pm2, val &
                        (PM2XXX_INT5_ITTHERMALWARNINGFALL |
                        PM2XXX_INT5_ITTHERMALWARNINGRISE |
                        PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
@@ -398,40 +400,40 @@ static int pm2_int_reg4(struct pm2xxx_charger *pm2)
        return ret;
 }
 
-static int pm2_int_reg5(struct pm2xxx_charger *pm2)
+static int pm2_int_reg5(void *pm2_data, int val)
 {
+       struct pm2xxx_charger *pm2 = pm2_data;
+       int ret = 0;
+
 
-       if (pm2->pm2_int[5]
-               & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
+       if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
                dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
        }
 
-       if (pm2->pm2_int[5] & (PM2XXX_INT6_ITVPWR2VALIDRISE |
-                               PM2XXX_INT6_ITVPWR1VALIDRISE |
-                               PM2XXX_INT6_ITVPWR2VALIDFALL |
-                               PM2XXX_INT6_ITVPWR1VALIDFALL)) {
+       if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
+                       PM2XXX_INT6_ITVPWR1VALIDRISE |
+                       PM2XXX_INT6_ITVPWR2VALIDFALL |
+                       PM2XXX_INT6_ITVPWR1VALIDFALL)) {
                dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
        }
 
-       return 0;
+       return ret;
 }
 
 static irqreturn_t  pm2xxx_irq_int(int irq, void *data)
 {
        struct pm2xxx_charger *pm2 = data;
-       int ret, i;
+       struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
+       int i;
 
-       for (i = 0; i < ARRAY_SIZE(pm2->pm2_int); i++) {
-               ret = pm2xxx_reg_read(pm2, pm2xxx_interrupt_registers[i],
-                               &(pm2->pm2_int[i]));
-       }
+       for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+                pm2xxx_reg_read(pm2,
+                               pm2xxx_interrupt_registers[i],
+                               &(interrupt->reg[i]));
 
-       pm2_int_reg0(pm2);
-       pm2_int_reg1(pm2);
-       pm2_int_reg2(pm2);
-       pm2_int_reg3(pm2);
-       pm2_int_reg4(pm2);
-       pm2_int_reg5(pm2);
+               if (interrupt->reg[i] > 0)
+                       interrupt->handler[i](pm2, interrupt->reg[i]);
+       }
 
        return IRQ_HANDLED;
 }
@@ -538,7 +540,7 @@ static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
        curr_index = pm2xxx_current_to_regval(ich_out);
        if (curr_index < 0) {
                dev_err(pm2->dev,
-                       "Charger current too high: charging not started\n");
+                       "Charger current too high, charging not started\n");
                return -ENXIO;
        }
 
@@ -614,6 +616,59 @@ static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
        ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
                                        PM2XXX_CH_WD_PRECH_PHASE_60MIN);
 
+       /* Disable auto timeout */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
+                                       PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
+
+       /*
+     * EOC current level = 100mA
+        * Precharge current level = 100mA
+        * CC current level = 1000mA
+        */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
+               (PM2XXX_DIR_CH_CC_CURRENT_1000MA |
+               PM2XXX_CH_PRECH_CURRENT_100MA |
+               PM2XXX_CH_EOC_CURRENT_100MA));
+
+       /*
+     * recharge threshold = 3.8V
+        * Precharge to CC threshold = 2.9V
+        */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
+               (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
+
+       /* float voltage charger level = 4.2V */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
+               PM2XXX_CH_VOLT_4_2);
+
+       /* Voltage drop between VBAT and VSYS in HW charging = 300mV */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
+               (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
+               PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
+               PM2XXX_CH_CC_MODEDROP_DIS));
+
+       /* Input charger level of over voltage = 10V */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
+                                       PM2XXX_VPWR2_OVV_10);
+       ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
+                                       PM2XXX_VPWR1_OVV_10);
+
+       /* Input charger drop */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
+               (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
+               PM2XXX_VPWR2_DROP_DIS));
+       ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
+               (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
+               PM2XXX_VPWR1_DROP_DIS));
+
+       /* Disable battery low monitoring */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
+               PM2XXX_VBAT_LOW_MONITORING_DIS);
+
+       /* Disable LED */
+       ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
+               PM2XXX_LED_SELECT_DIS);
+
        return ret;
 }
 
@@ -764,6 +819,15 @@ static void pm2xxx_charger_check_main_thermal_prot_work(
 {
 };
 
+static struct pm2xxx_interrupts pm2xxx_int = {
+       .handler[0] = pm2_int_reg0,
+       .handler[1] = pm2_int_reg1,
+       .handler[2] = pm2_int_reg2,
+       .handler[3] = pm2_int_reg3,
+       .handler[4] = pm2_int_reg4,
+       .handler[5] = pm2_int_reg5,
+};
+
 static struct pm2xxx_irq pm2xxx_charger_irq[] = {
        {"PM2XXX_IRQ_INT", pm2xxx_irq_int},
 };
@@ -797,6 +861,8 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
        pm2->dev = &i2c_client->dev;
        pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
 
+       pm2->pm2_int = &pm2xxx_int;
+
        /* get charger spcific platform data */
        if (!pl_data->wall_charger) {
                dev_err(pm2->dev, "no charger platform data supplied\n");
@@ -844,6 +910,7 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
                ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1];
        pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[
                ARRAY_SIZE(pm2xxx_charger_current_map) - 1];
+       pm2->ac_chg.enabled = true;
 
        /* Create a work queue for the charger */
        pm2->charger_wq =

diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
index bef38a3552b5c625f8e1d24b31b22c2a86491d0d..419014714c2faeb8a359a8ee1099e399526cff41 100644 (file)
--- a/drivers/power/pm2301_charger.h
+++ b/drivers/power/pm2301_charger.h
@@ -34,6 +34,8 @@
 #define WD_TIMER                       0x30 /* 4min */
 #define WD_KICK_INTERVAL               (60 * HZ)
 
+#define PM2XXX_NUM_INT_REG             0x6
+
 /* Constant voltage/current */
 #define PM2XXX_CONST_CURR              0x0
 #define PM2XXX_CONST_VOLT              0x1
@@ -237,12 +239,32 @@
 #define PM2XXX_VPWR2_OVV_10            0x2
 #define PM2XXX_VPWR2_OVV_NONE          0x3
 
+/* Input charger drop VPWR2 */
+#define PM2XXX_VPWR2_HW_OPT_EN         (0x1<<4)
+#define PM2XXX_VPWR2_HW_OPT_DIS                (0x0<<4)
+
+#define PM2XXX_VPWR2_VALID_EN          (0x1<<3)
+#define PM2XXX_VPWR2_VALID_DIS         (0x0<<3)
+
+#define PM2XXX_VPWR2_DROP_EN           (0x1<<2)
+#define PM2XXX_VPWR2_DROP_DIS          (0x0<<2)
+
 /* Input charger voltage VPWR1 */
 #define PM2XXX_VPWR1_OVV_6_0           0x0
 #define PM2XXX_VPWR1_OVV_6_3           0x1
 #define PM2XXX_VPWR1_OVV_10            0x2
 #define PM2XXX_VPWR1_OVV_NONE          0x3
 
+/* Input charger drop VPWR1 */
+#define PM2XXX_VPWR1_HW_OPT_EN         (0x1<<4)
+#define PM2XXX_VPWR1_HW_OPT_DIS                (0x0<<4)
+
+#define PM2XXX_VPWR1_VALID_EN          (0x1<<3)
+#define PM2XXX_VPWR1_VALID_DIS         (0x0<<3)
+
+#define PM2XXX_VPWR1_DROP_EN           (0x1<<2)
+#define PM2XXX_VPWR1_DROP_DIS          (0x0<<2)
+
 /* Battery low level comparator control register */
 #define PM2XXX_VBAT_LOW_MONITORING_DIS 0x0
 #define PM2XXX_VBAT_LOW_MONITORING_ENA 0x1
@@ -446,6 +468,11 @@ struct pm2xxx_charger_event_flags {
        bool chgwdexp;
 };
 
+struct pm2xxx_interrupts {
+       u8 reg[PM2XXX_NUM_INT_REG];
+       int (*handler[PM2XXX_NUM_INT_REG])(void *, int);
+};
+
 struct pm2xxx_config {
        struct i2c_client *pm2xxx_i2c;
        struct i2c_device_id *pm2xxx_id;
@@ -467,7 +494,7 @@ struct pm2xxx_charger {
        int old_vbat;
        int failure_case;
        int failure_input_ovv;
-       u8 pm2_int[6];
+       struct pm2xxx_interrupts *pm2_int;
        struct ab8500_gpadc *gpadc;
        struct regulator *regu;
        struct pm2xxx_bm_data *bat;