rtlwifi: rtl8821ae: Remove all instances of DBG_EMERG
authorLarry Finger <Larry.Finger@lwfinger.net>
Thu, 15 Dec 2016 18:22:59 +0000 (12:22 -0600)
committerKalle Valo <kvalo@codeaurora.org>
Fri, 30 Dec 2016 13:54:20 +0000 (15:54 +0200)
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c

index bdfd444955d25dad39ec4faa2f3d518b8a07e351..32900c51f024aa6192468fecb7c79984bd6b3f68 100644 (file)
@@ -604,8 +604,7 @@ static void rtl8821ae_dm_find_minimum_rssi(struct ieee80211_hw *hw)
        if ((mac->link_state < MAC80211_LINKED) &&
            (rtlpriv->dm.entry_min_undec_sm_pwdb == 0)) {
                rtl_dm_dig->min_undec_pwdb_for_dm = 0;
-               RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
-                        "Not connected to any\n");
+               pr_debug("rtl8821ae: Not connected to any AP\n");
        }
        if (mac->link_state >= MAC80211_LINKED) {
                if (mac->opmode == NL80211_IFTYPE_AP ||
index 9e87b96626c60f8c2762b305933c6bd6b803aa3d..814136cdfe2b0a8ed0fccfedb2f7ee1f75d708b2 100644 (file)
@@ -125,8 +125,7 @@ static void _rtl8821ae_write_fw(struct ieee80211_hw *hw,
        remainsize = size % FW_8821AE_PAGE_SIZE;
 
        if (pagenums > 8) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Page numbers should not greater then 8\n");
+               pr_err("Page numbers should not greater then 8\n");
        }
 
        for (page = 0; page < pagenums; page++) {
@@ -162,8 +161,8 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
                goto exit;
        }
 
-       RT_TRACE(rtlpriv, COMP_FW, DBG_EMERG,
-                "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
+       pr_err("Checksum report OK! REG_MCUFWDL:0x%08x\n",
+              value32);
 
        value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
        value32 |= MCUFWDL_RDY;
@@ -186,9 +185,8 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
                udelay(FW_8821AE_POLLING_DELAY);
        } while (counter++ < FW_8821AE_POLLING_TIMEOUT_COUNT);
 
-       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
-                value32);
+       pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+              value32);
 
 exit:
        return err;
index b045dd065cb6f16fe664406987695a58adc43aaf..a4e37e764563c71b01e0b89f034a2c4fdb39d971 100644 (file)
@@ -822,9 +822,8 @@ static bool _rtl8821ae_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
                        break;
 
                if (count > POLLING_LLT_THRESHOLD) {
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Failed to polling write LLT done at address %d!\n",
-                                address);
+                       pr_err("Failed to polling write LLT done at address %d!\n",
+                              address);
                        status = false;
                        break;
                }
@@ -1927,7 +1926,7 @@ int rtl8821ae_hw_init(struct ieee80211_hw *hw)
 
        rtstatus = _rtl8821ae_init_mac(hw);
        if (rtstatus != true) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+               pr_err("Init MAC failed\n");
                err = 1;
                return err;
        }
@@ -2174,8 +2173,7 @@ static int _rtl8821ae_set_media_status(struct ieee80211_hw *hw,
                         "Set Network type to AP!\n");
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Network type %d not support!\n", type);
+               pr_err("Network type %d not support!\n", type);
                return 1;
        }
 
@@ -3275,7 +3273,7 @@ void rtl8821ae_read_eeprom_info(struct ieee80211_hw *hw)
                rtlefuse->autoload_failflag = false;
                _rtl8821ae_read_adapter_info(hw, false);
        } else {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+               pr_err("Autoload ERR!!\n");
        }
        /*hal_ReadRFType_8812A()*/
        /* _rtl8821ae_hal_customized_behavior(hw); */
@@ -3950,8 +3948,7 @@ void rtl8821ae_set_key(struct ieee80211_hw *hw, u32 key_index,
                                if (mac->opmode == NL80211_IFTYPE_AP) {
                                        entry_id = rtl_cam_get_free_entry(hw, p_macaddr);
                                        if (entry_id >=  TOTAL_CAM_ENTRY) {
-                                               RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
-                                                        "Can not find free hwsecurity cam entry\n");
+                                               pr_err("an not find free hwsecurity cam entry\n");
                                                return;
                                        }
                                } else {
index 7e2f7b0ae446d751695995b13f462661caf55172..c60f07aa4acf5fd96f3eb7adc2e5a3e04327e02f 100644 (file)
@@ -215,7 +215,6 @@ void rtl8821ae_phy_set_rf_reg(struct ieee80211_hw *hw,
 static u32 _rtl8821ae_phy_rf_serial_read(struct ieee80211_hw *hw,
                                         enum radio_path rfpath, u32 offset)
 {
-       struct rtl_priv *rtlpriv = rtl_priv(hw);
        struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
        bool is_pi_mode = false;
        u32 retvalue = 0;
@@ -223,7 +222,7 @@ static u32 _rtl8821ae_phy_rf_serial_read(struct ieee80211_hw *hw,
        /* 2009/06/17 MH We can not execute IO for power
        save or other accident mode.*/
        if (RT_CANNOT_IO(hw)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+               pr_err("return all one\n");
                return 0xFFFFFFFF;
        }
        /* <20120809, Kordan> CCA OFF(when entering),
@@ -284,7 +283,7 @@ static void _rtl8821ae_phy_rf_serial_write(struct ieee80211_hw *hw,
        u32 newoffset;
 
        if (RT_CANNOT_IO(hw)) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+               pr_err("stop\n");
                return;
        }
        offset &= 0xff;
@@ -1665,7 +1664,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
        rtstatus = _rtl8821ae_phy_config_bb_with_headerfile(hw,
                                                       BASEBAND_CONFIG_PHY_REG);
        if (rtstatus != true) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+               pr_err("Write BB Reg Fail!!\n");
                return false;
        }
        _rtl8821ae_phy_init_tx_power_by_rate(hw);
@@ -1674,7 +1673,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
                                                    BASEBAND_CONFIG_PHY_REG);
        }
        if (rtstatus != true) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+               pr_err("BB_PG Reg Fail!!\n");
                return false;
        }
 
@@ -1688,7 +1687,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
                                                BASEBAND_CONFIG_AGC_TAB);
 
        if (rtstatus != true) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+               pr_err("AGC Table Fail\n");
                return false;
        }
        rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -2064,8 +2063,7 @@ bool rtl8812ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
                break;
        case RF90_PATH_C:
        case RF90_PATH_D:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", rfpath);
+               pr_err("switch case %#x not processed\n", rfpath);
                break;
        }
        return true;
@@ -2132,8 +2130,7 @@ bool rtl8821ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
        case RF90_PATH_B:
        case RF90_PATH_C:
        case RF90_PATH_D:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", rfpath);
+               pr_err("switch case %#x not processed\n", rfpath);
                break;
        }
        return true;
@@ -3336,8 +3333,7 @@ void rtl8821ae_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
                                                      (u8 *)&iotype);
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "Unknown Scan Backup operation.\n");
+                       pr_err("Unknown Scan Backup operation.\n");
                        break;
                }
        }
@@ -3378,8 +3374,7 @@ static u8 _rtl8821ae_phy_get_secondary_chnl(struct rtl_priv *rtlpriv)
                else if (mac->cur_80_prime_sc == PRIME_CHNL_OFFSET_UPPER)
                        sc_set_40 = VHT_DATA_SC_40_UPPER_OF_80MHZ;
                else
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                               "SCMapping: Not Correct Primary40MHz Setting\n");
+                       pr_err("SCMapping: Not Correct Primary40MHz Setting\n");
 
                if ((mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_LOWER) &&
                        (mac->cur_80_prime_sc == HAL_PRIME_CHNL_OFFSET_LOWER))
@@ -3394,16 +3389,14 @@ static u8 _rtl8821ae_phy_get_secondary_chnl(struct rtl_priv *rtlpriv)
                        (mac->cur_80_prime_sc == HAL_PRIME_CHNL_OFFSET_UPPER))
                        sc_set_20 = VHT_DATA_SC_20_UPPERST_OF_80MHZ;
                else
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                               "SCMapping: Not Correct Primary40MHz Setting\n");
+                       pr_err("SCMapping: Not Correct Primary40MHz Setting\n");
        } else if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
                if (mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_UPPER)
                        sc_set_20 = VHT_DATA_SC_20_UPPER_OF_80MHZ;
                else if (mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_LOWER)
                        sc_set_20 = VHT_DATA_SC_20_LOWER_OF_80MHZ;
                else
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "SCMapping: Not Correct Primary40MHz Setting\n");
+                       pr_err("SCMapping: Not Correct Primary40MHz Setting\n");
        }
        return (sc_set_40 << 4) | sc_set_20;
 }
@@ -3479,8 +3472,8 @@ void rtl8821ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
 
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+               pr_err("unknown bandwidth: %#X\n",
+                      rtlphy->current_chan_bw);
                break;
        }
 
@@ -4660,8 +4653,8 @@ bool rtl8821ae_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
                        postprocessing = true;
                        break;
                default:
-                       RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                                "switch case %#x not processed\n", iotype);
+                       pr_err("switch case %#x not processed\n",
+                              iotype);
                        break;
                }
        } while (false);
@@ -4704,9 +4697,8 @@ static void rtl8821ae_phy_set_io(struct ieee80211_hw *hw)
        case IO_CMD_PAUSE_BAND1_DM_BY_SCAN:
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n",
-                        rtlphy->current_io_type);
+               pr_err("switch case %#x not processed\n",
+                      rtlphy->current_io_type);
                break;
        }
        rtlphy->set_io_inprogress = false;
@@ -4811,8 +4803,8 @@ static bool _rtl8821ae_phy_set_rf_power_state(struct ieee80211_hw *hw,
                }
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "switch case %#x not processed\n", rfpwr_state);
+               pr_err("switch case %#x not processed\n",
+                      rfpwr_state);
                bresult = false;
                break;
        }
index c6ab957023e6357f4f677f61111381d756ca12f9..95489f41f8a082b2c7af9e5e5439abf762bbed6f 100644 (file)
@@ -34,8 +34,6 @@ static bool _rtl8821ae_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
 
 void rtl8821ae_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
 {
-       struct rtl_priv *rtlpriv = rtl_priv(hw);
-
        switch (bandwidth) {
        case HT_CHANNEL_WIDTH_20:
                rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, BIT(11)|BIT(10), 3);
@@ -50,8 +48,7 @@ void rtl8821ae_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
                rtl_set_rfreg(hw, RF90_PATH_B, RF_CHNLBW, BIT(11)|BIT(10), 0);
                break;
        default:
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "unknown bandwidth: %#X\n", bandwidth);
+               pr_err("unknown bandwidth: %#X\n", bandwidth);
                break;
        }
 }
index 297938e0effd54c47bcc0ff27ea5c5c1552ceb52..220de5f89dbce5fd4ed2ac24c59ceecbe2647c0b 100644 (file)
@@ -192,14 +192,12 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
        /* for firmware buf */
        rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
        if (!rtlpriv->rtlhal.pfirmware) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Can't alloc buffer for fw.\n");
+               pr_err("Can't alloc buffer for fw.\n");
                return 1;
        }
        rtlpriv->rtlhal.wowlan_firmware = vzalloc(0x8000);
        if (!rtlpriv->rtlhal.wowlan_firmware) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Can't alloc buffer for wowlan fw.\n");
+               pr_err("Can't alloc buffer for wowlan fw.\n");
                return 1;
        }
 
@@ -218,8 +216,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
                                      rtlpriv->io.dev, GFP_KERNEL, hw,
                                      rtl_fw_cb);
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Failed to request normal firmware!\n");
+               pr_err("Failed to request normal firmware!\n");
                return 1;
        }
        /*load wowlan firmware*/
@@ -229,8 +226,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
                                      rtlpriv->io.dev, GFP_KERNEL, hw,
                                      rtl_wowlan_fw_cb);
        if (err) {
-               RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-                        "Failed to request wowlan firmware!\n");
+               pr_err("Failed to request wowlan firmware!\n");
                return 1;
        }
        return 0;
@@ -313,7 +309,7 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
        .fwctrl_lps = true,
        .msi_support = true,
        .int_clear = true,
-       .debug = DBG_EMERG,
+       .debug = 0,
        .disable_watchdog = 0,
 };