DA830 EVM: use DA8XX_AEMIF_*_BASE #define's

The board file #define's its own version of EMIFA base addresses, while there
are DA8XX_AEMIF_*_BASE macros #define'd in <mach/da8xx.h>.  Start using them
instead.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 925705649ed010c92480f44cb1f78268e6eaa90e..8f079d2f1af91e977878b61e9107995ccec207f0 100644 (file)
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -33,9 +33,6 @@
 #define DA830_EVM_PHY_MASK             0x0
 #define DA830_EVM_MDIO_FREQUENCY       2200000 /* PHY bus frequency */
 
-#define DA830_EMIF25_ASYNC_DATA_CE3_BASE       0x62000000
-#define DA830_EMIF25_CONTROL_BASE              0x68000000
-
 /*
  * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
  */
@@ -375,13 +372,13 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 
 static struct resource da830_evm_nand_resources[] = {
        [0] = {         /* First memory resource is NAND I/O window */
-               .start  = DA830_EMIF25_ASYNC_DATA_CE3_BASE,
-               .end    = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+               .start  = DA8XX_AEMIF_CS3_BASE,
+               .end    = DA8XX_AEMIF_CS3_BASE + PAGE_SIZE - 1,
                .flags  = IORESOURCE_MEM,
        },
        [1] = {         /* Second memory resource is AEMIF control registers */
-               .start  = DA830_EMIF25_CONTROL_BASE,
-               .end    = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+               .start  = DA8XX_AEMIF_CTL_BASE,
+               .end    = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
                .flags  = IORESOURCE_MEM,
        },
 };