MIPS: DB1200: PCMCIA card detection must not be auto-enabled.

Same issues as SD card detection:  One of both is always triggering and the
handlers take care to shut it up and enable the other.  To avoid messages
about "unbalanced interrupt enable/disable" they must not be automatically
enabled when initally requested.

This was not an issue with the db1200_defconfig due to fortunate timings;
on a build without network chip support the warnings appear.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1133/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c
index be7e92ea01f30f07e52b63c629d5b50a19799a72..8876195475539e0ea881c2b80b8bf6a21ff2d2d9 100644 (file)
--- a/arch/mips/alchemy/devboards/db1200/setup.c
+++ b/arch/mips/alchemy/devboards/db1200/setup.c
@@ -66,12 +66,16 @@ static int __init db1200_arch_init(void)
        set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
        bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
-       /* do not autoenable these: CPLD has broken edge int handling,
-        * and the CD handler setup requires manual enabling to work
-        * around that.
+       /* insert/eject pairs: one of both is always screaming.  To avoid
+        * issues they must not be automatically enabled when initially
+        * requested.
         */
        irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
        irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+       irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+       irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+       irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+       irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
 
        return 0;
 }

diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
index 2d48196a48cd4226bcac88c1d42bcf2c309d2939..0f4cc3f00028ec8d96f4df730c7f2b6fa31f7428 100644 (file)
--- a/drivers/pcmcia/db1xxx_ss.c
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -146,7 +146,6 @@ static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
 static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
 {
        int ret;
-       unsigned long flags;
 
        if (sock->stschg_irq != -1) {
                ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
@@ -162,30 +161,23 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
         * active one disabled.
         */
        if (sock->board_type == BOARD_TYPE_DB1200) {
-               local_irq_save(flags);
-
                ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
                                  IRQF_DISABLED, "pcmcia_insert", sock);
-               if (ret) {
-                       local_irq_restore(flags);
+               if (ret)
                        goto out1;
-               }
 
                ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
                                  IRQF_DISABLED, "pcmcia_eject", sock);
                if (ret) {
                        free_irq(sock->insert_irq, sock);
-                       local_irq_restore(flags);
                        goto out1;
                }
 
-               /* disable the currently active one */
+               /* enable the currently silent one */
                if (db1200_card_inserted(sock))
-                       disable_irq_nosync(sock->insert_irq);
+                       enable_irq(sock->eject_irq);
                else
-                       disable_irq_nosync(sock->eject_irq);
-
-               local_irq_restore(flags);
+                       enable_irq(sock->insert_irq);
        } else {
                /* all other (older) Db1x00 boards use a GPIO to show
                 * card detection status:  use both-edge triggers.