X-Git-Url: https://git.stricted.de/?a=blobdiff_plain;f=sound%2Fsoc%2Fcodecs%2Fwm8962.c;h=1ae1f8bd9c368fc7152db72c8d68b478433eb4e1;hb=b4350432998578500203d562d5b093c6a5beadd2;hp=e9710280e5e18b882242f8d5b4cb61a2492e8eae;hpb=5f948722cd2f797bb2ce7684e72336a5edd149a6;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index e9710280e5e1..1ae1f8bd9c36 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -153,6 +153,7 @@ static struct reg_default wm8962_reg[] = {
 	{ 40, 0x0000 },   /* R40    - SPKOUTL volume */
 	{ 41, 0x0000 },   /* R41    - SPKOUTR volume */
 
+	{ 49, 0x0010 },   /* R49    - Class D Control 1 */
 	{ 51, 0x0003 },   /* R51    - Class D Control 2 */
 
 	{ 56, 0x0506 },   /* R56    - Clocking 4 */
@@ -794,7 +795,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg)
 	case WM8962_ALC2:
 	case WM8962_THERMAL_SHUTDOWN_STATUS:
 	case WM8962_ADDITIONAL_CONTROL_4:
-	case WM8962_CLASS_D_CONTROL_1:
 	case WM8962_DC_SERVO_6:
 	case WM8962_INTERRUPT_STATUS_1:
 	case WM8962_INTERRUPT_STATUS_2:
@@ -1600,7 +1600,6 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	/* Apply the update (if any) */
@@ -1609,16 +1608,19 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
 		return 0;
 
 	/* If the left PGA is enabled hit that VU bit... */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
-				     reg_cache[WM8962_HPOUTL_VOLUME]);
+	ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+	if (ret & WM8962_HPOUTL_PGA_ENA) {
+		snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+		return 1;
+	}
 
 	/* ...otherwise the right.  The VU is stereo. */
-	if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
-		return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
-				     reg_cache[WM8962_HPOUTR_VOLUME]);
+	if (ret & WM8962_HPOUTR_PGA_ENA)
+		snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+			      snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
 
-	return 0;
+	return 1;
 }
 
 /* The VU bits for the speakers are in a different register to the mute
@@ -2899,13 +2901,22 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 static int wm8962_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct snd_soc_codec *codec = dai->codec;
-	int val;
+	int val, ret;
 
 	if (mute)
-		val = WM8962_DAC_MUTE;
+		val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT;
 	else
 		val = 0;
 
+	/**
+	 * The DAC mute bit is mirrored in two registers, update both to keep
+	 * the register cache consistent.
+	 */
+	ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1,
+				  WM8962_DAC_MUTE_ALT, val);
+	if (ret < 0)
+		return ret;
+
 	return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
 				   WM8962_DAC_MUTE, val);
 }
@@ -3374,7 +3385,6 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 	int ret;
 	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
 	struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
-	u16 *reg_cache = codec->reg_cache;
 	int i, trigger, irq_pol;
 	bool dmicclk, dmicdat;
 
@@ -3432,8 +3442,9 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 
 		/* Put the speakers into mono mode? */
 		if (pdata->spk_mono)
-			reg_cache[WM8962_CLASS_D_CONTROL_2]
-				|= WM8962_SPK_MONO;
+			snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+				WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
 
 		/* Micbias setup, detection enable and detection
 		 * threasholds. */
@@ -3684,6 +3695,8 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
 	if (ret < 0)
 		goto err_enable;
 
+	regcache_cache_only(wm8962->regmap, true);
+
 	/* The drivers should power up as needed */
 	regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);