#include "led.h"
#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
#define IEEE80211_ASSOC_MAX_TRIES 3
struct ieee80211_channel *channel,
const struct ieee80211_ht_operation *ht_oper,
const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef, bool verbose)
+ struct cfg80211_chan_def *chandef, bool tracking)
{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct cfg80211_chan_def vht_chandef;
u32 ht_cfreq, ret;
ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
channel->band);
/* check that channel matches the right operating channel */
- if (channel->center_freq != ht_cfreq) {
+ if (!tracking && channel->center_freq != ht_cfreq) {
/*
* It's possible that some APs are confused here;
* Netgear WNDR3700 sometimes reports 4 higher than
* since we look at probe response/beacon data here
* it should be OK.
*/
- if (verbose)
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
goto out;
}
switch (vht_oper->chan_width) {
case IEEE80211_VHT_CHANWIDTH_USE_HT:
vht_chandef.width = chandef->width;
+ vht_chandef.center_freq1 = chandef->center_freq1;
break;
case IEEE80211_VHT_CHANWIDTH_80MHZ:
vht_chandef.width = NL80211_CHAN_WIDTH_80;
channel->band);
break;
default:
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT operation IE has invalid channel width (%d), disable VHT\n",
vht_oper->chan_width);
}
if (!cfg80211_chandef_valid(&vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information is invalid, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
}
if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information doesn't match HT, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
ret = 0;
out:
+ /*
+ * When tracking the current AP, don't do any further checks if the
+ * new chandef is identical to the one we're currently using for the
+ * connection. This keeps us from playing ping-pong with regulatory,
+ * without it the following can happen (for example):
+ * - connect to an AP with 80 MHz, world regdom allows 80 MHz
+ * - AP advertises regdom US
+ * - CRDA loads regdom US with 80 MHz prohibited (old database)
+ * - the code below detects an unsupported channel, downgrades, and
+ * we disconnect from the AP in the caller
+ * - disconnect causes CRDA to reload world regdomain and the game
+ * starts anew.
+ * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
+ *
+ * It seems possible that there are still scenarios with CSA or real
+ * bandwidth changes where a this could happen, but those cases are
+ * less common and wouldn't completely prevent using the AP.
+ */
+ if (tracking &&
+ cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
+ return ret;
+
/* don't print the message below for VHT mismatch if VHT is disabled */
if (ret & IEEE80211_STA_DISABLE_VHT)
vht_chandef = *chandef;
+ /*
+ * Ignore the DISABLED flag when we're already connected and only
+ * tracking the APs beacon for bandwidth changes - otherwise we
+ * might get disconnected here if we connect to an AP, update our
+ * regulatory information based on the AP's country IE and the
+ * information we have is wrong/outdated and disables the channel
+ * that we're actually using for the connection to the AP.
+ */
while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
- IEEE80211_CHAN_DISABLED)) {
+ tracking ? 0 :
+ IEEE80211_CHAN_DISABLED)) {
if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
ret = IEEE80211_STA_DISABLE_HT |
IEEE80211_STA_DISABLE_VHT;
- goto out;
+ break;
}
ret |= chandef_downgrade(chandef);
}
- if (chandef->width != vht_chandef.width && verbose)
+ if (chandef->width != vht_chandef.width && !tracking)
sdata_info(sdata,
"capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
/* calculate new channel (type) based on HT/VHT operation IEs */
flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
- vht_oper, &chandef, false);
+ vht_oper, &chandef, true);
/*
* Downgrade the new channel if we associated with restricted
u16 capab_info, aid;
struct ieee802_11_elems elems;
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
+ const struct cfg80211_bss_ies *bss_ies = NULL;
+ struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
u32 changed = 0;
int err;
+ bool ret;
/* AssocResp and ReassocResp have identical structure */
ifmgd->aid = aid;
+ /*
+ * Some APs are erroneously not including some information in their
+ * (re)association response frames. Try to recover by using the data
+ * from the beacon or probe response. This seems to afflict mobile
+ * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
+ * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
+ */
+ if ((assoc_data->wmm && !elems.wmm_param) ||
+ (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
+ (!elems.ht_cap_elem || !elems.ht_operation)) ||
+ (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
+ (!elems.vht_cap_elem || !elems.vht_operation))) {
+ const struct cfg80211_bss_ies *ies;
+ struct ieee802_11_elems bss_elems;
+
+ rcu_read_lock();
+ ies = rcu_dereference(cbss->ies);
+ if (ies)
+ bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
+ GFP_ATOMIC);
+ rcu_read_unlock();
+ if (!bss_ies)
+ return false;
+
+ ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
+ false, &bss_elems);
+ if (assoc_data->wmm &&
+ !elems.wmm_param && bss_elems.wmm_param) {
+ elems.wmm_param = bss_elems.wmm_param;
+ sdata_info(sdata,
+ "AP bug: WMM param missing from AssocResp\n");
+ }
+
+ /*
+ * Also check if we requested HT/VHT, otherwise the AP doesn't
+ * have to include the IEs in the (re)association response.
+ */
+ if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
+ !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
+ elems.ht_cap_elem = bss_elems.ht_cap_elem;
+ sdata_info(sdata,
+ "AP bug: HT capability missing from AssocResp\n");
+ }
+ if (!elems.ht_operation && bss_elems.ht_operation &&
+ !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
+ elems.ht_operation = bss_elems.ht_operation;
+ sdata_info(sdata,
+ "AP bug: HT operation missing from AssocResp\n");
+ }
+ if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
+ !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
+ elems.vht_cap_elem = bss_elems.vht_cap_elem;
+ sdata_info(sdata,
+ "AP bug: VHT capa missing from AssocResp\n");
+ }
+ if (!elems.vht_operation && bss_elems.vht_operation &&
+ !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
+ elems.vht_operation = bss_elems.vht_operation;
+ sdata_info(sdata,
+ "AP bug: VHT operation missing from AssocResp\n");
+ }
+ }
+
/*
* We previously checked these in the beacon/probe response, so
* they should be present here. This is just a safety net.
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
(!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
sdata_info(sdata,
- "HT AP is missing WMM params or HT capability/operation in AssocResp\n");
- return false;
+ "HT AP is missing WMM params or HT capability/operation\n");
+ ret = false;
+ goto out;
}
if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
(!elems.vht_cap_elem || !elems.vht_operation)) {
sdata_info(sdata,
- "VHT AP is missing VHT capability/operation in AssocResp\n");
- return false;
+ "VHT AP is missing VHT capability/operation\n");
+ ret = false;
+ goto out;
}
mutex_lock(&sdata->local->sta_mtx);
sta = sta_info_get(sdata, cbss->bssid);
if (WARN_ON(!sta)) {
mutex_unlock(&sdata->local->sta_mtx);
- return false;
+ ret = false;
+ goto out;
}
sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
sta->sta.addr);
WARN_ON(__sta_info_destroy(sta));
mutex_unlock(&sdata->local->sta_mtx);
- return false;
+ ret = false;
+ goto out;
}
mutex_unlock(&sdata->local->sta_mtx);
ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
ieee80211_sta_reset_beacon_monitor(sdata);
- return true;
+ ret = true;
+ out:
+ kfree(bss_ies);
+ return ret;
}
static enum rx_mgmt_action __must_check
if (tx_flags == 0) {
auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
- ifmgd->auth_data->timeout_started = true;
+ auth_data->timeout_started = true;
run_again(ifmgd, auth_data->timeout);
} else {
- auth_data->timeout_started = false;
+ auth_data->timeout =
+ round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
+ auth_data->timeout_started = true;
+ run_again(ifmgd, auth_data->timeout);
}
return 0;
assoc_data->timeout_started = true;
run_again(&sdata->u.mgd, assoc_data->timeout);
} else {
- assoc_data->timeout_started = false;
+ assoc_data->timeout =
+ round_jiffies_up(jiffies +
+ IEEE80211_ASSOC_TIMEOUT_LONG);
+ assoc_data->timeout_started = true;
+ run_again(&sdata->u.mgd, assoc_data->timeout);
}
return 0;
}
#ifdef CONFIG_PM
+void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
+
+ mutex_lock(&ifmgd->mtx);
+
+ if (ifmgd->auth_data) {
+ /*
+ * If we are trying to authenticate while suspending, cfg80211
+ * won't know and won't actually abort those attempts, thus we
+ * need to do that ourselves.
+ */
+ ieee80211_send_deauth_disassoc(sdata,
+ ifmgd->auth_data->bss->bssid,
+ IEEE80211_STYPE_DEAUTH,
+ WLAN_REASON_DEAUTH_LEAVING,
+ false, frame_buf);
+ ieee80211_destroy_auth_data(sdata, false);
+ cfg80211_send_deauth(sdata->dev, frame_buf,
+ IEEE80211_DEAUTH_FRAME_LEN);
+ }
+
+ mutex_unlock(&ifmgd->mtx);
+}
+
void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_oper, vht_oper,
- &chandef, true);
+ &chandef, false);
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
local->rx_chains);
rcu_read_unlock();
if (bss->wmm_used && bss->uapsd_supported &&
- (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD) &&
- sdata->wmm_acm != 0xff) {
+ (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
assoc_data->uapsd = true;
ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
} else {
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blobdiff