unsigned long port_addr)
{
int status;
+ int i;
- if (test_bit(port, &uhci->suspended_ports)) {
+ if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
- clear_bit(port, &uhci->suspended_ports);
- clear_bit(port, &uhci->resuming_ports);
- set_bit(port, &uhci->port_c_suspend);
+ if (test_bit(port, &uhci->resuming_ports))
+ set_bit(port, &uhci->port_c_suspend);
/* The controller won't actually turn off the RD bit until
* it has had a chance to send a low-speed EOP sequence,
- * which takes 3 bit times (= 2 microseconds). We'll delay
- * slightly longer for good luck. */
- udelay(4);
+ * which is supposed to take 3 bit times (= 2 microseconds).
+ * Experiments show that some controllers take longer, so
+ * we'll poll for completion. */
+ for (i = 0; i < 10; ++i) {
+ if (!(inw(port_addr) & USBPORTSC_RD))
+ break;
+ udelay(1);
+ }
}
+ clear_bit(port, &uhci->resuming_ports);
}
/* Wait for the UHCI controller in HP's iLO2 server management chip.
spin_lock_irqsave(&uhci->lock, flags);
- uhci_scan_schedule(uhci, NULL);
- if (uhci->hc_inaccessible)
+ uhci_scan_schedule(uhci);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
goto done;
- check_fsbr(uhci);
uhci_check_ports(uhci);
status = get_hub_status_data(uhci, buf);
u16 wPortChange, wPortStatus;
unsigned long flags;
- if (uhci->hc_inaccessible)
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead)
return -ETIMEDOUT;
spin_lock_irqsave(&uhci->lock, flags);
wPortChange |= USB_PORT_STAT_C_SUSPEND;
lstatus |= 1;
}
- if (test_bit(port, &uhci->suspended_ports))
- lstatus |= 2;
if (test_bit(port, &uhci->resuming_ports))
lstatus |= 4;
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- set_bit(port, &uhci->suspended_ports);
SET_RH_PORTSTAT(USBPORTSC_SUSP);
OK(0);
case USB_PORT_FEAT_RESET:
CLR_RH_PORTSTAT(USBPORTSC_PEC);
OK(0);
case USB_PORT_FEAT_SUSPEND:
- if (test_bit(port, &uhci->suspended_ports) &&
- !test_and_set_bit(port,
+ if (!(inw(port_addr) & USBPORTSC_SUSP)) {
+
+ /* Make certain the port isn't suspended */
+ uhci_finish_suspend(uhci, port, port_addr);
+ } else if (!test_and_set_bit(port,
&uhci->resuming_ports)) {
SET_RH_PORTSTAT(USBPORTSC_RD);