-/********************************************************************************
-* QLOGIC LINUX SOFTWARE
-*
-* QLogic ISP2x00 device driver for Linux 2.6.x
-* Copyright (C) 2003-2005 QLogic Corporation
-* (www.qlogic.com)
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2, or (at your option) any
-* later version.
-*
-* This program is distributed in the hope that it will be useful, but
-* WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-* General Public License for more details.
-**
-******************************************************************************/
-
+/*
+ * QLogic Fibre Channel HBA Driver
+ * Copyright (c) 2003-2005 QLogic Corporation
+ *
+ * See LICENSE.qla2xxx for copyright and licensing details.
+ */
#ifndef __QLA_DEF_H
#define __QLA_DEF_H
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/firmware.h>
#include <asm/semaphore.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_fc.h>
+#if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE)
#if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE)
#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100)
#else
#define IS_QLA2522(ha) 0
#endif
+#else /* !defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) */
+
+#define IS_QLA2100(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2100)
+#define IS_QLA2200(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2200)
+#define IS_QLA2300(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2300)
+#define IS_QLA2312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2312)
+#define IS_QLA2322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2322)
+#define IS_QLA6312(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6312)
+#define IS_QLA6322(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP6322)
+#define IS_QLA2422(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422)
+#define IS_QLA2432(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+#define IS_QLA2512(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2512)
+#define IS_QLA2522(ha) ((ha)->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2522)
+#endif
+
#define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
IS_QLA6312(ha) || IS_QLA6322(ha))
-
#define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
#define IS_QLA25XX(ha) (IS_QLA2512(ha) || IS_QLA2522(ha))
#define WRT_REG_WORD(addr, data) writew(data,addr)
#define WRT_REG_DWORD(addr, data) writel(data,addr)
+/*
+ * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
+ * 133Mhz slot.
+ */
+#define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr))
+#define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr))
+
/*
* Fibre Channel device definitions.
*/
#define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040
#define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080
#define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0
+#define GPIO_LED_ALL_OFF 0x0000
+#define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */
+#define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */
union {
struct {
#define PD_STATE_WAIT_PORT_LOGOUT_ACK 11
+#define QLA_ZIO_MODE_5 (BIT_2 | BIT_0)
+#define QLA_ZIO_MODE_6 (BIT_2 | BIT_1)
+#define QLA_ZIO_DISABLED 0
+#define QLA_ZIO_DEFAULT_TIMER 2
+
/*
* ISP Initialization Control Block.
* Little endian except where noted.
uint8_t mp_byte; /* multi-path byte (not used) */
uint8_t cur_path; /* current path id */
- struct fc_rport *rport;
+ spinlock_t rport_lock;
+ struct fc_rport *rport, *drport;
u32 supported_classes;
+ struct work_struct rport_add_work;
+ struct work_struct rport_del_work;
} fc_port_t;
/*
struct scsi_host_template *sht;
};
+struct fw_blob {
+ char *name;
+ uint32_t segs[4];
+ const struct firmware *fw;
+};
+
/* Return data from MBC_GET_ID_LIST call. */
struct gid_list_info {
uint8_t al_pa;
void (*fw_dump) (struct scsi_qla_host *, int);
void (*ascii_fw_dump) (struct scsi_qla_host *);
+
+ int (*beacon_on) (struct scsi_qla_host *);
+ int (*beacon_off) (struct scsi_qla_host *);
+ void (*beacon_blink) (struct scsi_qla_host *);
};
/*
#define LOOP_RESET_NEEDED 24
#define BEACON_BLINK_NEEDED 25
#define REGISTER_FDMI_NEEDED 26
+#define FCPORT_UPDATE_NEEDED 27
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
uint16_t min_external_loopid; /* First external loop Id */
uint16_t link_data_rate; /* F/W operating speed */
+#define LDR_1GB 0
+#define LDR_2GB 1
+#define LDR_4GB 3
+#define LDR_UNKNOWN 0xFFFF
uint8_t current_topology;
uint8_t prev_topology;
/* Needed for BEACON */
uint16_t beacon_blink_led;
- uint16_t beacon_green_on;
+ uint8_t beacon_color_state;
+#define QLA_LED_GRN_ON 0x01
+#define QLA_LED_YLW_ON 0x02
+#define QLA_LED_ABR_ON 0x04
+#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */
+ /* ISP2322: red, green, amber. */
+
+ uint16_t zio_mode;
+ uint16_t zio_timer;
+ struct fc_host_statistics fc_host_stat;
} scsi_qla_host_t;
*/
#define LOOP_TRANSITION(ha) \
(test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
-
-#define LOOP_NOT_READY(ha) \
- ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
- test_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags) || \
- test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
- test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \
+ test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
atomic_read(&ha->loop_state) == LOOP_DOWN)
-#define LOOP_RDY(ha) (!LOOP_NOT_READY(ha))
-
#define TGT_Q(ha, t) (ha->otgt[t])
#define to_qla_host(x) ((scsi_qla_host_t *) (x)->hostdata)
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blobdiff