Staging: et131x: config is already zeroed

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / 3c59x.c

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index c204168509486ddf758915a23863fcaf9397dc40..7adff4d0960ddc09d3b430b1ac88b596bcf85fc4 100644 (file)
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -235,6 +235,7 @@ enum vortex_chips {
        CH_3C900B_FL,
        CH_3C905_1,
        CH_3C905_2,
+       CH_3C905B_TX,
        CH_3C905B_1,
 
        CH_3C905B_2,
@@ -307,6 +308,8 @@ static struct vortex_chip_info {
         PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
        {"3c905 Boomerang 100baseT4",
         PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+       {"3C905B-TX Fast Etherlink XL PCI",
+        PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
        {"3c905B Cyclone 100baseTx",
         PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
 
@@ -389,6 +392,7 @@ static struct pci_device_id vortex_pci_tbl[] = {
        { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
        { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
        { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+       { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
        { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
 
        { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
@@ -712,8 +716,10 @@ static int mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
 static void vortex_timer(unsigned long arg);
 static void rx_oom_timer(unsigned long arg);
-static int vortex_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static netdev_tx_t vortex_start_xmit(struct sk_buff *skb,
+                                    struct net_device *dev);
+static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb,
+                                       struct net_device *dev);
 static int vortex_rx(struct net_device *dev);
 static int boomerang_rx(struct net_device *dev);
 static irqreturn_t vortex_interrupt(int irq, void *dev_id);
@@ -2031,7 +2037,7 @@ vortex_error(struct net_device *dev, int status)
        }
 }
 
-static int
+static netdev_tx_t
 vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
        struct vortex_private *vp = netdev_priv(dev);
@@ -2083,10 +2089,10 @@ vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
                        iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
                }
        }
-       return 0;
+       return NETDEV_TX_OK;
 }
 
-static int
+static netdev_tx_t
 boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
        struct vortex_private *vp = netdev_priv(dev);
@@ -2173,7 +2179,7 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
        iowrite16(DownUnstall, ioaddr + EL3_CMD);
        spin_unlock_irqrestore(&vp->lock, flags);
        dev->trans_start = jiffies;
-       return 0;
+       return NETDEV_TX_OK;
 }
 
 /* The interrupt handler does all of the Rx thread work and cleans up