#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/input.h>
#include <linux/slab.h>
#include "saa7134-reg.h"
static int ir_rc5_remote_gap = 885;
module_param(ir_rc5_remote_gap, int, 0644);
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "delay before key repeat started");
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
-MODULE_PARM_DESC(repeat_period, "repeat period between "
- "keypresses when key is down");
-
static unsigned int disable_other_ir;
module_param(disable_other_ir, int, 0644);
MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
__saa7134_ir_stop(dev);
}
-static int saa7134_ir_open(void *priv)
+static int saa7134_ir_open(struct rc_dev *rc)
{
- struct saa7134_dev *dev = priv;
+ struct saa7134_dev *dev = rc->priv;
dev->remote->users++;
return __saa7134_ir_start(dev);
}
-static void saa7134_ir_close(void *priv)
+static void saa7134_ir_close(struct rc_dev *rc)
{
- struct saa7134_dev *dev = priv;
+ struct saa7134_dev *dev = rc->priv;
dev->remote->users--;
if (!dev->remote->users)
}
-static int saa7134_ir_change_protocol(void *priv, u64 ir_type)
+static int saa7134_ir_change_protocol(struct rc_dev *rc, u64 ir_type)
{
- struct saa7134_dev *dev = priv;
+ struct saa7134_dev *dev = rc->priv;
struct card_ir *ir = dev->remote;
u32 nec_gpio, rc5_gpio;
int saa7134_input_init1(struct saa7134_dev *dev)
{
struct card_ir *ir;
- struct input_dev *input_dev;
+ struct rc_dev *rc;
char *ir_codes = NULL;
u32 mask_keycode = 0;
u32 mask_keydown = 0;
}
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ir || !input_dev) {
+ rc = rc_allocate_device();
+ if (!ir || !rc) {
err = -ENOMEM;
goto err_out_free;
}
- ir->dev = input_dev;
+ ir->dev = rc;
dev->remote = ir;
ir->running = 0;
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
-
- ir->props.priv = dev;
- ir->props.open = saa7134_ir_open;
- ir->props.close = saa7134_ir_close;
-
+ rc->priv = dev;
+ rc->open = saa7134_ir_open;
+ rc->close = saa7134_ir_close;
if (raw_decode)
- ir->props.driver_type = RC_DRIVER_IR_RAW;
+ rc->driver_type = RC_DRIVER_IR_RAW;
if (!raw_decode && allow_protocol_change) {
- ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
- ir->props.change_protocol = saa7134_ir_change_protocol;
+ rc->allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
+ rc->change_protocol = saa7134_ir_change_protocol;
}
- input_dev->name = ir->name;
- input_dev->phys = ir->phys;
- input_dev->id.bustype = BUS_PCI;
- input_dev->id.version = 1;
+ rc->input_name = ir->name;
+ rc->input_phys = ir->phys;
+ rc->input_id.bustype = BUS_PCI;
+ rc->input_id.version = 1;
if (dev->pci->subsystem_vendor) {
- input_dev->id.vendor = dev->pci->subsystem_vendor;
- input_dev->id.product = dev->pci->subsystem_device;
+ rc->input_id.vendor = dev->pci->subsystem_vendor;
+ rc->input_id.product = dev->pci->subsystem_device;
} else {
- input_dev->id.vendor = dev->pci->vendor;
- input_dev->id.product = dev->pci->device;
+ rc->input_id.vendor = dev->pci->vendor;
+ rc->input_id.product = dev->pci->device;
}
- input_dev->dev.parent = &dev->pci->dev;
+ rc->dev.parent = &dev->pci->dev;
+ rc->map_name = ir_codes;
+ rc->driver_name = MODULE_NAME;
- err = ir_input_register(ir->dev, ir_codes, &ir->props, MODULE_NAME);
+ err = rc_register_device(rc);
if (err)
goto err_out_free;
- /* the remote isn't as bouncy as a keyboard */
- ir->dev->rep[REP_DELAY] = repeat_delay;
- ir->dev->rep[REP_PERIOD] = repeat_period;
-
return 0;
err_out_free:
+ rc_free_device(rc);
dev->remote = NULL;
kfree(ir);
return err;
return;
saa7134_ir_stop(dev);
- ir_input_unregister(dev->remote->dev);
+ rc_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
}