#include <media/soc_mediabus.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
#define RJ54N1_DEV_CODE 0x0400
#define RJ54N1_DEV_CODE2 0x0401
struct rj54n1 {
struct v4l2_subdev subdev;
+ struct v4l2_ctrl_handler hdl;
struct rj54n1_clock_div clk_div;
const struct rj54n1_datafmt *fmt;
struct v4l2_rect rect; /* Sensor window */
return reg_set(client, RJ54N1_STILL_CONTROL, (!enable) << 7, 0x80);
}
-static int rj54n1_set_bus_param(struct soc_camera_device *icd,
- unsigned long flags)
-{
- struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
-
- if (flags & SOCAM_PCLK_SAMPLE_RISING)
- return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
- else
- return reg_write(client, RJ54N1_OUT_SIGPO, 0);
-}
-
-static unsigned long rj54n1_query_bus_param(struct soc_camera_device *icd)
-{
- struct soc_camera_link *icl = to_soc_camera_link(icd);
- const unsigned long flags =
- SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
- SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
- SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
- SOCAM_DATA_ACTIVE_HIGH;
-
- return soc_camera_apply_sensor_flags(icl, flags);
-}
-
static int rj54n1_set_rect(struct i2c_client *client,
u16 reg_x, u16 reg_y, u16 reg_xy,
u32 width, u32 height)
}
#endif
-static const struct v4l2_queryctrl rj54n1_controls[] = {
- {
- .id = V4L2_CID_VFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Vertically",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_HFLIP,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Flip Horizontally",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 0,
- }, {
- .id = V4L2_CID_GAIN,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Gain",
- .minimum = 0,
- .maximum = 127,
- .step = 1,
- .default_value = 66,
- .flags = V4L2_CTRL_FLAG_SLIDER,
- }, {
- .id = V4L2_CID_AUTO_WHITE_BALANCE,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- .name = "Auto white balance",
- .minimum = 0,
- .maximum = 1,
- .step = 1,
- .default_value = 1,
- },
-};
-
-static struct soc_camera_ops rj54n1_ops = {
- .set_bus_param = rj54n1_set_bus_param,
- .query_bus_param = rj54n1_query_bus_param,
- .controls = rj54n1_controls,
- .num_controls = ARRAY_SIZE(rj54n1_controls),
-};
-
-static int rj54n1_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int rj54n1_s_ctrl(struct v4l2_ctrl *ctrl)
{
+ struct rj54n1 *rj54n1 = container_of(ctrl->handler, struct rj54n1, hdl);
+ struct v4l2_subdev *sd = &rj54n1->subdev;
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct rj54n1 *rj54n1 = to_rj54n1(client);
int data;
switch (ctrl->id) {
case V4L2_CID_VFLIP:
- data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !(data & 1);
- break;
- case V4L2_CID_HFLIP:
- data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
- if (data < 0)
- return -EIO;
- ctrl->value = !(data & 2);
- break;
- case V4L2_CID_GAIN:
- data = reg_read(client, RJ54N1_Y_GAIN);
- if (data < 0)
- return -EIO;
-
- ctrl->value = data / 2;
- break;
- case V4L2_CID_AUTO_WHITE_BALANCE:
- ctrl->value = rj54n1->auto_wb;
- break;
- }
-
- return 0;
-}
-
-static int rj54n1_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- int data;
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct rj54n1 *rj54n1 = to_rj54n1(client);
- const struct v4l2_queryctrl *qctrl;
-
- qctrl = soc_camera_find_qctrl(&rj54n1_ops, ctrl->id);
- if (!qctrl)
- return -EINVAL;
-
- switch (ctrl->id) {
- case V4L2_CID_VFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1);
else
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_HFLIP:
- if (ctrl->value)
+ if (ctrl->val)
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2);
else
data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2);
if (data < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_GAIN:
- if (ctrl->value > qctrl->maximum ||
- ctrl->value < qctrl->minimum)
- return -EINVAL;
- else if (reg_write(client, RJ54N1_Y_GAIN, ctrl->value * 2) < 0)
+ if (reg_write(client, RJ54N1_Y_GAIN, ctrl->val * 2) < 0)
return -EIO;
- break;
+ return 0;
case V4L2_CID_AUTO_WHITE_BALANCE:
/* Auto WB area - whole image */
- if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->value << 7,
+ if (reg_set(client, RJ54N1_WB_SEL_WEIGHT_I, ctrl->val << 7,
0x80) < 0)
return -EIO;
- rj54n1->auto_wb = ctrl->value;
- break;
+ rj54n1->auto_wb = ctrl->val;
+ return 0;
}
- return 0;
+ return -EINVAL;
}
+static const struct v4l2_ctrl_ops rj54n1_ctrl_ops = {
+ .s_ctrl = rj54n1_s_ctrl,
+};
+
static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = {
- .g_ctrl = rj54n1_g_ctrl,
- .s_ctrl = rj54n1_s_ctrl,
.g_chip_ident = rj54n1_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = rj54n1_g_register,
struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
cfg->flags =
V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
const struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
/* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
if (soc_camera_apply_board_flags(icl, cfg) &
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
*/
-static int rj54n1_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client,
+static int rj54n1_video_probe(struct i2c_client *client,
struct rj54n1_pdata *priv)
{
int data1, data2;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/* Read out the chip version register */
data1 = reg_read(client, RJ54N1_DEV_CODE);
data2 = reg_read(client, RJ54N1_DEV_CODE2);
const struct i2c_device_id *did)
{
struct rj54n1 *rj54n1;
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
struct rj54n1_pdata *rj54n1_priv;
int ret;
- if (!icd) {
- dev_err(&client->dev, "RJ54N1CB0C: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl || !icl->priv) {
dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
return -EINVAL;
return -ENOMEM;
v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops);
+ v4l2_ctrl_handler_init(&rj54n1->hdl, 4);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_VFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_GAIN, 0, 127, 1, 66);
+ v4l2_ctrl_new_std(&rj54n1->hdl, &rj54n1_ctrl_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+ rj54n1->subdev.ctrl_handler = &rj54n1->hdl;
+ if (rj54n1->hdl.error) {
+ int err = rj54n1->hdl.error;
- icd->ops = &rj54n1_ops;
+ kfree(rj54n1);
+ return err;
+ }
rj54n1->clk_div = clk_div;
rj54n1->rect.left = RJ54N1_COLUMN_SKIP;
rj54n1->tgclk_mhz = (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
(clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
- ret = rj54n1_video_probe(icd, client, rj54n1_priv);
+ ret = rj54n1_video_probe(client, rj54n1_priv);
if (ret < 0) {
- icd->ops = NULL;
+ v4l2_ctrl_handler_free(&rj54n1->hdl);
kfree(rj54n1);
return ret;
}
-
- return ret;
+ return v4l2_ctrl_handler_setup(&rj54n1->hdl);
}
static int rj54n1_remove(struct i2c_client *client)
{
struct rj54n1 *rj54n1 = to_rj54n1(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
- icd->ops = NULL;
+ v4l2_device_unregister_subdev(&rj54n1->subdev);
if (icl->free_bus)
icl->free_bus(icl);
+ v4l2_ctrl_handler_free(&rj54n1->hdl);
kfree(rj54n1);
return 0;