struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
cfg->flags =
V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
const struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
/* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
if (soc_camera_apply_board_flags(icl, cfg) &
* Interface active, can use i2c. If it fails, it can indeed mean, that
* this wasn't our capture interface, so, we wait for the right one
*/
-static int rj54n1_video_probe(struct soc_camera_device *icd,
- struct i2c_client *client,
+static int rj54n1_video_probe(struct i2c_client *client,
struct rj54n1_pdata *priv)
{
int data1, data2;
int ret;
- /* We must have a parent by now. And it cannot be a wrong one. */
- BUG_ON(!icd->parent ||
- to_soc_camera_host(icd->parent)->nr != icd->iface);
-
/* Read out the chip version register */
data1 = reg_read(client, RJ54N1_DEV_CODE);
data2 = reg_read(client, RJ54N1_DEV_CODE2);
const struct i2c_device_id *did)
{
struct rj54n1 *rj54n1;
- struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- struct soc_camera_link *icl;
struct rj54n1_pdata *rj54n1_priv;
int ret;
- if (!icd) {
- dev_err(&client->dev, "RJ54N1CB0C: missing soc-camera data!\n");
- return -EINVAL;
- }
-
- icl = to_soc_camera_link(icd);
if (!icl || !icl->priv) {
dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
return -EINVAL;
rj54n1->tgclk_mhz = (rj54n1_priv->mclk_freq / PLL_L * PLL_N) /
(clk_div.ratio_tg + 1) / (clk_div.ratio_t + 1);
- ret = rj54n1_video_probe(icd, client, rj54n1_priv);
+ ret = rj54n1_video_probe(client, rj54n1_priv);
if (ret < 0) {
v4l2_ctrl_handler_free(&rj54n1->hdl);
kfree(rj54n1);
static int rj54n1_remove(struct i2c_client *client)
{
struct rj54n1 *rj54n1 = to_rj54n1(client);
- struct soc_camera_device *icd = client->dev.platform_data;
- struct soc_camera_link *icl = to_soc_camera_link(icd);
+ struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
v4l2_device_unregister_subdev(&rj54n1->subdev);
if (icl->free_bus)