source "drivers/media/video/cx88/Kconfig"
-source "drivers/media/video/em28xx/Kconfig"
-
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
depends on VIDEO_DEV && I2C
To compile this driver as a module, choose M here: the
module will be called saa7127
+#
+# USB Multimedia device configuration
+#
+
+menu "V4L USB devices"
+ depends on USB && VIDEO_DEV
+
+source "drivers/media/video/em28xx/Kconfig"
+
+config USB_VICAM
+ tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
+ depends on USB && VIDEO_DEV && EXPERIMENTAL
+ ---help---
+ Say Y here if you have 3com homeconnect camera (vicam).
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" (under Multimedia Devices) to use this driver.
+ Information on this API and pointers to "v4l" programs may be found
+ at <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vicam.
+
+config USB_DSBR
+ tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+ depends on USB && VIDEO_DEV && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
+
+ This driver uses the Video For Linux API. You must enable
+ (Y or M in config) Video For Linux (under Character Devices)
+ to use this driver. Information on this API and pointers to
+ "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
+
+config USB_ET61X251
+ tristate "USB ET61X[12]51 PC Camera Controller support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want support for cameras based on Etoms ET61X151
+ or ET61X251 PC Camera Controllers.
+
+ See <file:Documentation/usb/et61x251.txt> for more informations.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" to use this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called et61x251.
+
+config USB_IBMCAM
+ tristate "USB IBM (Xirlink) C-it Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect a IBM "C-It" camera, also known as
+ "Xirlink PC Camera" to your computer's USB port. For more
+ information, read <file:Documentation/usb/ibmcam.txt>.
+
+ This driver uses the Video For Linux API. You must enable
+ (Y or M in config) Video For Linux (under Character Devices)
+ to use this driver. Information on this API and pointers to
+ "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmcam.
+
+ This camera has several configuration options which
+ can be specified when you load the module. Read
+ <file:Documentation/usb/ibmcam.txt> to learn more.
+
+config USB_KONICAWC
+ tristate "USB Konica Webcam support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want support for webcams based on a Konica
+ chipset. This is known to work with the Intel YC76 webcam.
+
+ This driver uses the Video For Linux API. You must enable
+ (Y or M in config) Video For Linux (under Character Devices)
+ to use this driver. Information on this API and pointers to
+ "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called konicawc.
+
+config USB_OV511
+ tristate "USB OV511 Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/usb/ov511.txt> for more
+ information and for a list of supported cameras.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" (under Character Devices) to use this driver.
+ Information on this API and pointers to "v4l" programs may be found
+ at <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov511.
+
+config USB_SE401
+ tristate "USB SE401 Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. See <file:Documentation/usb/se401.txt> for more
+ information and for a list of supported cameras.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" (under Multimedia Devices) to use this driver.
+ Information on this API and pointers to "v4l" programs may be found
+ at <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called se401.
+
+config USB_SN9C102
+ tristate "USB SN9C10x PC Camera Controller support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want support for cameras based on SONiX SN9C101,
+ SN9C102 or SN9C103 PC Camera Controllers.
+
+ See <file:Documentation/usb/sn9c102.txt> for more informations.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" to use this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sn9c102.
+
+config USB_STV680
+ tristate "USB STV680 (Pencam) Camera support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want to connect this type of camera to your
+ computer's USB port. This includes the Pencam line of cameras.
+ See <file:Documentation/usb/stv680.txt> for more information and for
+ a list of supported cameras.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" (under Multimedia Devices) to use this driver.
+ Information on this API and pointers to "v4l" programs may be found
+ at <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stv680.
+
+config USB_W9968CF
+ tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+ depends on USB && VIDEO_DEV && I2C && VIDEO_OVCAMCHIP
+ ---help---
+ Say Y here if you want support for cameras based on OV681 or
+ Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+
+ This driver has an optional plugin, which is distributed as a
+ separate module only (released under GPL). It allows to use higher
+ resolutions and framerates, but cannot be included in the official
+ Linux kernel for performance purposes.
+
+ See <file:Documentation/usb/w9968cf.txt> for more informations.
+
+ This driver uses the Video For Linux and the I2C APIs. It needs the
+ OmniVision Camera Chip support as well. You must say Y or M to
+ "Video For Linux", "I2C Support" and "OmniVision Camera Chip
+ support" to use this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w9968cf.
+
+config USB_ZC0301
+ tristate "USB ZC0301 Image Processor and Control Chip support"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y here if you want support for cameras based on the ZC0301
+ Image Processor and Control Chip.
+
+ See <file:Documentation/usb/zc0301.txt> for more informations.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" to use this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zc0301.
+
+config USB_PWC
+ tristate "USB Philips Cameras"
+ depends on USB && VIDEO_DEV
+ ---help---
+ Say Y or M here if you want to use one of these Philips & OEM
+ webcams:
+ * Philips PCA645, PCA646
+ * Philips PCVC675, PCVC680, PCVC690
+ * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
+ * Askey VC010
+ * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro'
+ and 'Orbit'/'Sphere'
+ * Samsung MPC-C10, MPC-C30
+ * Creative Webcam 5, Pro Ex
+ * SOTEC Afina Eye
+ * Visionite VCS-UC300, VCS-UM100
+
+ The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
+ and never will be, but the 665 and 720/20 are supported by other
+ drivers.
+
+ See <file:Documentation/usb/philips.txt> for more information and
+ installation instructions.
+
+ The built-in microphone is enabled by selecting USB Audio support.
+
+ This driver uses the Video For Linux API. You must say Y or M to
+ "Video For Linux" (under Character Devices) to use this driver.
+ Information on this API and pointers to "v4l" programs may be found
+ at <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pwc.
+
+endmenu # V4L USB devices
+
endmenu
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blobdiff