#include <asm/numa.h>
#include <asm/sections.h>
#include <asm/dmi.h>
+#include <asm/cacheflush.h>
+#include <asm/mce.h>
/*
* Machine setup..
#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
-struct resource data_resource = {
+static struct resource data_resource = {
.name = "Kernel data",
.start = 0,
.end = 0,
.flags = IORESOURCE_RAM,
};
-struct resource code_resource = {
+static struct resource code_resource = {
.name = "Kernel code",
.start = 0,
.end = 0,
.flags = IORESOURCE_RAM,
};
+static struct resource bss_resource = {
+ .name = "Kernel bss",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_RAM,
+};
+
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
#ifdef CONFIG_PROC_VMCORE
/* elfcorehdr= specifies the location of elf core header
}
#endif
+#ifdef CONFIG_KEXEC
+static void __init reserve_crashkernel(void)
+{
+ unsigned long long free_mem;
+ unsigned long long crash_size, crash_base;
+ int ret;
+
+ free_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT;
+
+ ret = parse_crashkernel(boot_command_line, free_mem,
+ &crash_size, &crash_base);
+ if (ret == 0 && crash_size) {
+ if (crash_base > 0) {
+ printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+ "for crashkernel (System RAM: %ldMB)\n",
+ (unsigned long)(crash_size >> 20),
+ (unsigned long)(crash_base >> 20),
+ (unsigned long)(free_mem >> 20));
+ crashk_res.start = crash_base;
+ crashk_res.end = crash_base + crash_size - 1;
+ reserve_bootmem(crash_base, crash_size);
+ } else
+ printk(KERN_INFO "crashkernel reservation failed - "
+ "you have to specify a base address\n");
+ }
+}
+#else
+static inline void __init reserve_crashkernel(void)
+{}
+#endif
+
#define EBDA_ADDR_POINTER 0x40E
unsigned __initdata ebda_addr;
code_resource.end = virt_to_phys(&_etext)-1;
data_resource.start = virt_to_phys(&_etext);
data_resource.end = virt_to_phys(&_edata)-1;
+ bss_resource.start = virt_to_phys(&__bss_start);
+ bss_resource.end = virt_to_phys(&__bss_stop)-1;
early_identify_cpu(&boot_cpu_data);
dmi_scan_machine();
+ io_delay_init();
+
+#ifdef CONFIG_SMP
+ /* setup to use the static apicid table during kernel startup */
+ x86_cpu_to_apicid_ptr = (void *)&x86_cpu_to_apicid_init;
+#endif
+
#ifdef CONFIG_ACPI
/*
* Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
}
}
#endif
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end) {
- reserve_bootmem_generic(crashk_res.start,
- crashk_res.end - crashk_res.start + 1);
- }
-#endif
-
+ reserve_crashkernel();
paging_init();
-#ifdef CONFIG_PCI
early_quirks();
-#endif
/*
* set this early, so we dont allocate cpu0
if (smp_found_config)
get_smp_config();
init_apic_mappings();
+ ioapic_init_mappings();
/*
* We trust e820 completely. No explicit ROM probing in memory.
*/
- e820_reserve_resources();
+ e820_reserve_resources(&code_resource, &data_resource, &bss_resource);
e820_mark_nosave_regions();
{
but in the same order as the HT nodeids.
If that doesn't result in a usable node fall back to the
path for the previous case. */
- int ht_nodeid = apicid - (cpu_data[0].phys_proc_id << bits);
+ int ht_nodeid = apicid - (cpu_data(0).phys_proc_id << bits);
if (ht_nodeid >= 0 &&
apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
node = apicid_to_node[ht_nodeid];
/* Do some early cpuid on the boot CPU to get some parameter that are
needed before check_bugs. Everything advanced is in identify_cpu
below. */
-void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
{
u32 tfms;
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_x86 *c = v;
+ int cpu = 0;
/*
* These flag bits must match the definitions in <asm/cpufeature.h>.
/* Intel-defined (#2) */
"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
"tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", NULL, NULL, NULL, NULL, "popcnt",
+ NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* VIA/Cyrix/Centaur-defined */
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
- "altmovcr8", "abm", "sse4a",
- "misalignsse", "3dnowprefetch",
- "osvw", "ibs", NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic",
+ "cr8_legacy", "abm", "sse4a", "misalignsse",
+ "3dnowprefetch", "osvw", "ibs", "sse5",
+ "skinit", "wdt", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
#ifdef CONFIG_SMP
- if (!cpu_online(c-cpu_data))
- return 0;
+ cpu = c->cpu_index;
#endif
seq_printf(m,"processor\t: %u\n"
"cpu family\t: %d\n"
"model\t\t: %d\n"
"model name\t: %s\n",
- (unsigned)(c-cpu_data),
+ (unsigned)cpu,
c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
c->x86,
(int)c->x86_model,
seq_printf(m, "stepping\t: unknown\n");
if (cpu_has(c,X86_FEATURE_TSC)) {
- unsigned int freq = cpufreq_quick_get((unsigned)(c-cpu_data));
+ unsigned int freq = cpufreq_quick_get((unsigned)cpu);
if (!freq)
freq = cpu_khz;
seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
#ifdef CONFIG_SMP
if (smp_num_siblings * c->x86_max_cores > 1) {
- int cpu = c - cpu_data;
seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
seq_printf(m, "siblings\t: %d\n",
cpus_weight(per_cpu(cpu_core_map, cpu)));
static void *c_start(struct seq_file *m, loff_t *pos)
{
- return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+ if (*pos == 0) /* just in case, cpu 0 is not the first */
+ *pos = first_cpu(cpu_online_map);
+ if ((*pos) < NR_CPUS && cpu_online(*pos))
+ return &cpu_data(*pos);
+ return NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
- ++*pos;
+ *pos = next_cpu(*pos, cpu_online_map);
return c_start(m, pos);
}
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blobdiff