Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / arm / mach-davinci / board-dm355-evm.c

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index bfdf8b979a64d1e0219738a2a020bb5f0b6527a3..c2a0a67d09e011446a60d8de0e913459f6139d86 100644 (file)
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -242,6 +242,73 @@ static struct vpfe_config vpfe_cfg = {
        .ccdc = "DM355 CCDC",
 };
 
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm355evm_enc_preset_timing[] = {
+       {
+               .name           = "ntsc",
+               .timings_type   = VPBE_ENC_STD,
+               .std_id         = V4L2_STD_NTSC,
+               .interlaced     = 1,
+               .xres           = 720,
+               .yres           = 480,
+               .aspect         = {11, 10},
+               .fps            = {30000, 1001},
+               .left_margin    = 0x79,
+               .upper_margin   = 0x10,
+       },
+       {
+               .name           = "pal",
+               .timings_type   = VPBE_ENC_STD,
+               .std_id         = V4L2_STD_PAL,
+               .interlaced     = 1,
+               .xres           = 720,
+               .yres           = 576,
+               .aspect         = {54, 59},
+               .fps            = {25, 1},
+               .left_margin    = 0x7E,
+               .upper_margin   = 0x16
+       },
+};
+
+#define VENC_STD_ALL   (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm355evm_vpbe_outputs[] = {
+       {
+               .output         = {
+                       .index          = 0,
+                       .name           = "Composite",
+                       .type           = V4L2_OUTPUT_TYPE_ANALOG,
+                       .std            = VENC_STD_ALL,
+                       .capabilities   = V4L2_OUT_CAP_STD,
+               },
+               .subdev_name    = DM355_VPBE_VENC_SUBDEV_NAME,
+               .default_mode   = "ntsc",
+               .num_modes      = ARRAY_SIZE(dm355evm_enc_preset_timing),
+               .modes          = dm355evm_enc_preset_timing,
+               .if_params      = V4L2_MBUS_FMT_FIXED,
+       },
+};
+
+static struct vpbe_config dm355evm_display_cfg = {
+       .module_name    = "dm355-vpbe-display",
+       .i2c_adapter_id = 1,
+       .osd            = {
+               .module_name    = DM355_VPBE_OSD_SUBDEV_NAME,
+       },
+       .venc           = {
+               .module_name    = DM355_VPBE_VENC_SUBDEV_NAME,
+       },
+       .num_outputs    = ARRAY_SIZE(dm355evm_vpbe_outputs),
+       .outputs        = dm355evm_vpbe_outputs,
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
        &dm355evm_dm9000,
        &davinci_nand_device,
@@ -253,8 +320,6 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
-       /* setup input configuration for VPFE input devices */
-       dm355_set_vpfe_config(&vpfe_cfg);
        dm355_init();
 }
 
@@ -343,6 +408,8 @@ static __init void dm355_evm_init(void)
        davinci_setup_mmc(0, &dm355evm_mmc_config);
        davinci_setup_mmc(1, &dm355evm_mmc_config);
 
+       dm355_init_video(&vpfe_cfg, &dm355evm_display_cfg);
+
        dm355_init_spi0(BIT(0), dm355_evm_spi_info,
                        ARRAY_SIZE(dm355_evm_spi_info));