depends on GENERIC_CLOCKEVENTS
default y if SMP && !LOCAL_TIMERS
-config MMU
- bool
- default y
-
config NO_IOPORT
bool
config ARCH_HAS_ILOG2_U64
bool
+config ARCH_HAS_CPUFREQ
+ bool
+ help
+ Internal node to signify that the ARCH has CPUFREQ support
+ and that the relevant menu configurations are displayed for
+ it.
+
config GENERIC_HWEIGHT
bool
default y
menu "System Type"
+config MMU
+ bool "MMU-based Paged Memory Management Support"
+ default y
+ help
+ Select if you want MMU-based virtualised addressing space
+ support by paged memory management. If unsure, say 'Y'.
+
choice
prompt "ARM system type"
default ARCH_VERSATILE
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd RealView boards.
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd Versatile board.
help
This enables support for systems based on the Hynix HMS720x
+config ARCH_NOMADIK
+ bool "STMicroelectronics Nomadik"
+ select ARM_AMBA
+ select ARM_VIC
+ select CPU_ARM926T
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Nomadik platform by ST-Ericsson
+
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
select CPU_ARM926T
select ARCH_REQUIRE_GPIOLIB
select GENERIC_GPIO
+ select HAVE_CLK
select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+ At present, the w90x900 has been renamed nuc900, regarding
+ the ARM series product line, you can login the following
+ link address to know more.
+
+ <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
bool "Samsung S3C64XX"
select GENERIC_GPIO
select HAVE_CLK
+ select ARCH_HAS_CPUFREQ
help
Samsung S3C64XX series based systems
+config ARCH_S5PC1XX
+ bool "Samsung S5PC1XX"
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select CPU_V7
+ help
+ Samsung S5PC1XX series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
core with a wide array of integrated devices for
hand-held and low-power applications.
+config ARCH_U300
+ bool "ST-Ericsson U300 Series"
+ depends on MMU
+ select CPU_ARM926T
+ select ARM_AMBA
+ select ARM_VIC
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_GPIO
+ help
+ Support for ST-Ericsson U300 series mobile platforms.
+
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926T
select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_BCMRING
+ bool "Broadcom BCMRING"
+ depends on MMU
+ select CPU_V6
+ select ARM_AMBA
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ help
+ Support for Broadcom's BCMRing platform.
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/plat-stmp3xxx/Kconfig"
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+
source "arch/arm/mach-netx/Kconfig"
source "arch/arm/mach-ns9xxx/Kconfig"
source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-bcmring/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
-config PREEMPT
- bool "Preemptible Kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say Y here if you are building a kernel for a desktop, embedded
- or real-time system. Say N if you are unsure.
+source kernel/Kconfig.preempt
config HZ
int
default AT91_TIMER_HZ if ARCH_AT91
default 100
+config THUMB2_KERNEL
+ bool "Compile the kernel in Thumb-2 mode"
+ depends on CPU_V7 && EXPERIMENTAL
+ select AEABI
+ select ARM_ASM_UNIFIED
+ help
+ By enabling this option, the kernel will be compiled in
+ Thumb-2 mode. A compiler/assembler that understand the unified
+ ARM-Thumb syntax is needed.
+
+ If unsure, say N.
+
+config ARM_ASM_UNIFIED
+ bool
+
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
If unsure, say n.
+config HIGHPTE
+ bool "Allocate 2nd-level pagetables from highmem"
+ depends on HIGHMEM
+ depends on !OUTER_CACHE
+
source "mm/Kconfig"
config LEDS
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
+if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
+config CPU_FREQ_S3C64XX
+ bool "CPUfreq support for Samsung S3C64XX CPUs"
+ depends on CPU_FREQ && CPU_S3C6410
+
+config CPU_FREQ_S3C
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+ depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+ select CPU_FREQ_S3C
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency"
+ depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on CPU_FREQ_S3C24XX && DEBUG_FS
+ help
+ Export status information via debugfs.
+
endif
source "drivers/cpuidle/Kconfig"
source "net/Kconfig"
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
source "fs/Kconfig"