select SPARSE_IRQ
select USE_OF
+config ARM_SINGLE_ARMV7M
+ bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
+ depends on !MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_NVIC
+ select AUTO_ZRELADDR
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_IOPORT_MAP
+ select SPARSE_IRQ
+ select USE_OF
+
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARCH_WANT_OPTIONAL_GPIOLIB
help
This enables support for ARM Ltd Versatile board.
-config ARCH_AT91
- bool "Atmel AT91"
- select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
- select IRQ_DOMAIN
- select NEED_MACH_IO_H if PCCARD
- select PINCTRL
- select PINCTRL_AT91
- select USE_OF
- help
- This enables support for systems based on Atmel
- AT91RM9200, AT91SAM9 and SAMA5 processors.
-
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
-config ARCH_EFM32
- bool "Energy Micro efm32"
- depends on !MMU
- select ARCH_REQUIRE_GPIOLIB
- select ARM_NVIC
- select AUTO_ZRELADDR
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7M
- select GENERIC_CLOCKEVENTS
- select NO_DMA
- select NO_IOPORT_MAP
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
- processors.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
+ select COMMON_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM
- bool "Qualcomm MSM (non-multiplatform)"
- select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm MSM/QSD based systems. This runs on the
- apps processor of the MSM/QSD and depends on a shared memory
- interface to the modem processor which runs the baseband
- stack and controls some vital subsystems
- (clock and power control, etc).
-
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_MACH_CLKDEV
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select MULTI_IRQ_HANDLER
select GENERIC_IRQ_CHIP
select HAVE_IDE
select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
select NEED_MACH_IO_H if PCCARD
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
#
source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/mach-alpine/Kconfig"
+
source "arch/arm/mach-asm9260/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-meson/Kconfig"
-source "arch/arm/mach-msm/Kconfig"
-
source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-u300/Kconfig"
+source "arch/arm/mach-uniphier/Kconfig"
+
source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-zx/Kconfig"
+
source "arch/arm/mach-zynq/Kconfig"
+# ARMv7-M architecture
+config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
+config ARCH_LPC18XX
+ bool "NXP LPC18xx/LPC43xx"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_AMBA
+ select CLKSRC_LPC32XX
+ select PINCTRL
+ help
+ Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+ high performance microcontrollers.
+
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARMV7M_SYSTICK
+ select RESET_CONTROLLER
+ help
+ Support for STMicroelectronics STM32 processors.
+
# Definitions to make life easier
config ARCH_ACORN
bool
int
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
- default AT91_TIMER_HZ if ARCH_AT91
+ default 128 if SOC_AT91RM9200
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
-choice
- prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
- depends on ZBOOT_ROM && ARCH_SH7372
- default ZBOOT_ROM_NONE
- help
- Include experimental SD/MMC loading code in the ROM-able zImage.
- With this enabled it is possible to write the ROM-able zImage
- kernel image to an MMC or SD card and boot the kernel straight
- from the reset vector. At reset the processor Mask ROM will load
- the first part of the ROM-able zImage which in turn loads the
- rest the kernel image to RAM.
-
-config ZBOOT_ROM_NONE
- bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
- help
- Do not load image from SD or MMC
-
-config ZBOOT_ROM_MMCIF
- bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
- help
- Load image from MMCIF hardware block.
-
-config ZBOOT_ROM_SH_MOBILE_SDHI
- bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
- help
- Load image from SDHI hardware block
-
-endchoice
-
config ARM_APPENDED_DTB
bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
depends on OF
source "drivers/Kconfig"
+source "drivers/firmware/Kconfig"
+
source "fs/Kconfig"
source "arch/arm/Kconfig.debug"