[PATCH] Remove even more stale references to Documentation/smp.tex

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8752751f99857dbe2a3d3f4636ffa6ad93cea828..11fff042aa817d022139947e82093d24a3e567a4 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -64,6 +64,9 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_BUST_SPINLOCK
        bool
 
+config ARCH_MAY_HAVE_PC_FDC
+       bool
+
 config GENERIC_ISA_DMA
        bool
 
@@ -150,6 +153,7 @@ config ARCH_RPC
        select ARCH_ACORN
        select FIQ
        select TIMER_ACORN
+       select ARCH_MAY_HAVE_PC_FDC
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -310,7 +314,7 @@ menu "Kernel Features"
 
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-       depends on EXPERIMENTAL #&& n
+       depends on EXPERIMENTAL && BROKEN #&& n
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If
@@ -322,8 +326,8 @@ config SMP
          processor machines. On a single processor machine, the kernel will
          run faster if you say N here.
 
-         See also the <file:Documentation/smp.tex>,
-         <file:Documentation/smp.txt>, <file:Documentation/i386/IO-APIC.txt>,
+         See also the <file:Documentation/smp.txt>,
+         <file:Documentation/i386/IO-APIC.txt>,
          <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
          <http://www.linuxdoc.org/docs.html#howto>.
 
@@ -365,8 +369,8 @@ config NO_IDLE_HZ
 
          Please note that dynamic tick may affect the accuracy of
          timekeeping on some platforms depending on the implementation.
-         Currently at least OMAP platform is known to have accurate
-         timekeeping with dynamic tick.
+         Currently at least OMAP, PXA2xx and SA11x0 platforms are known
+         to have accurate timekeeping with dynamic tick.
 
 config ARCH_DISCONTIGMEM_ENABLE
        bool
@@ -635,10 +639,6 @@ config PM
          and the Battery Powered Linux mini-HOWTO, available from
          <http://www.tldp.org/docs.html#howto>.
 
-         Note that, even if you say N here, Linux on the x86 architecture
-         will issue the hlt instruction if nothing is to be done, thereby
-         sending the processor to sleep and saving power.
-
 config APM
        tristate "Advanced Power Management Emulation"
        depends on PM
@@ -650,12 +650,6 @@ config APM
          battery status information, and user-space programs will receive
          notification of APM "events" (e.g. battery status change).
 
-         If you select "Y" here, you can disable actual use of the APM
-         BIOS by passing the "apm=off" option to the kernel at boot time.
-
-         Note that the APM support is almost completely disabled for
-         machines with more than one CPU.
-
          In order to use APM, you will need supporting software. For location
          and more information, read <file:Documentation/pm.txt> and the
          Battery Powered Linux mini-HOWTO, available from
@@ -665,41 +659,16 @@ config APM
          manpage ("man 8 hdparm") for that), and it doesn't turn off
          VESA-compliant "green" monitors.
 
-         This driver does not support the TI 4000M TravelMate and the ACER
-         486/DX4/75 because they don't have compliant BIOSes. Many "green"
-         desktop machines also don't have compliant BIOSes, and this driver
-         may cause those machines to panic during the boot phase.
-
          Generally, if you don't have a battery in your machine, there isn't
          much point in using this driver and you should say N. If you get
          random kernel OOPSes or reboots that don't seem to be related to
          anything, try disabling/enabling this option (or disabling/enabling
          APM in your BIOS).
 
-         Some other things you should try when experiencing seemingly random,
-         "weird" problems:
-
-         1) make sure that you have enough swap space and that it is
-         enabled.
-         2) pass the "no-hlt" option to the kernel
-         3) switch on floating point emulation in the kernel and pass
-         the "no387" option to the kernel
-         4) pass the "floppy=nodma" option to the kernel
-         5) pass the "mem=4M" option to the kernel (thereby disabling
-         all but the first 4 MB of RAM)
-         6) make sure that the CPU is not over clocked.
-         7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
-         8) disable the cache from your BIOS settings
-         9) install a fan for the video card or exchange video RAM
-         10) install a better fan for the CPU
-         11) exchange RAM chips
-         12) exchange the motherboard.
-
-         To compile this driver as a module, choose M here: the
-         module will be called apm.
-
 endmenu
 
+source "net/Kconfig"
+
 menu "Device Drivers"
 
 source "drivers/base/Kconfig"
@@ -732,7 +701,7 @@ source "drivers/ieee1394/Kconfig"
 
 source "drivers/message/i2o/Kconfig"
 
-source "net/Kconfig"
+source "drivers/net/Kconfig"
 
 source "drivers/isdn/Kconfig"
 
@@ -744,10 +713,14 @@ source "drivers/char/Kconfig"
 
 source "drivers/i2c/Kconfig"
 
+source "drivers/hwmon/Kconfig"
+
 #source "drivers/l3/Kconfig"
 
 source "drivers/misc/Kconfig"
 
+source "drivers/mfd/Kconfig"
+
 source "drivers/media/Kconfig"
 
 source "drivers/video/Kconfig"