sound/drivers/Kconfig

   1 # ALSA generic drivers
   2
   3 menu "Generic devices"
   4         depends on SND!=n
   5
   6
   7 config SND_PCSP
   8         tristate "Internal PC speaker support"
   9         depends on X86_PC && HIGH_RES_TIMERS
  10         depends on INPUT
  11         help
  12           If you don't have a sound card in your computer, you can include a
  13           driver for the PC speaker which allows it to act like a primitive
  14           sound card.
  15           This driver also replaces the pcspkr driver for beeps.
  16
  17           You can compile this as a module which will be called snd-pcsp.
  18
  19           You don't need this driver if you only want your pc-speaker to beep.
  20           You don't need this driver if you have a tablet piezo beeper
  21           in your PC instead of the real speaker.
  22
  23           It should not hurt to say Y or M here in all other cases.
  24
  25 config SND_MPU401_UART
  26         tristate
  27         select SND_RAWMIDI
  28
  29 config SND_OPL3_LIB
  30         tristate
  31         select SND_TIMER
  32         select SND_HWDEP
  33
  34 config SND_OPL4_LIB
  35         tristate
  36         select SND_TIMER
  37         select SND_HWDEP
  38
  39 config SND_VX_LIB
  40         tristate
  41         select SND_HWDEP
  42         select SND_PCM
  43
  44 config SND_AC97_CODEC
  45         tristate
  46         select SND_PCM
  47         select AC97_BUS
  48
  49 config SND_DUMMY
  50         tristate "Dummy (/dev/null) soundcard"
  51         depends on SND
  52         select SND_PCM
  53         help
  54           Say Y here to include the dummy driver.  This driver does
  55           nothing, but emulates various mixer controls and PCM devices.
  56
  57           You don't need this unless you're testing the hardware support
  58           of programs using the ALSA API.
  59
  60           To compile this driver as a module, choose M here: the module
  61           will be called snd-dummy.
  62
  63 config SND_VIRMIDI
  64         tristate "Virtual MIDI soundcard"
  65         depends on SND_SEQUENCER
  66         select SND_TIMER
  67         select SND_RAWMIDI
  68         help
  69           Say Y here to include the virtual MIDI driver.  This driver
  70           allows to connect applications using raw MIDI devices to
  71           sequencer clients.
  72
  73           If you don't know what MIDI is, say N here.
  74
  75           To compile this driver as a module, choose M here: the module
  76           will be called snd-virmidi.
  77
  78 config SND_MTPAV
  79         tristate "MOTU MidiTimePiece AV multiport MIDI"
  80         depends on SND
  81         select SND_RAWMIDI
  82         help
  83           To use a MOTU MidiTimePiece AV multiport MIDI adapter
  84           connected to the parallel port, say Y here and make sure that
  85           the standard parallel port driver isn't used for the port.
  86
  87           To compile this driver as a module, choose M here: the module
  88           will be called snd-mtpav.
  89
  90 config SND_MTS64
  91         tristate "ESI Miditerminal 4140 driver"
  92         depends on SND && PARPORT
  93         select SND_RAWMIDI
  94         help
  95           The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with
  96           additional SMPTE Timecode capabilities for the parallel port.
  97
  98           Say 'Y' to include support for this device.
  99
 100           To compile this driver as a module, chose 'M' here: the module
 101           will be called snd-mts64.
 102
 103 config SND_SERIAL_U16550
 104         tristate "UART16550 serial MIDI driver"
 105         depends on SND
 106         select SND_RAWMIDI
 107         help
 108           To include support for MIDI serial port interfaces, say Y here
 109           and read <file:Documentation/sound/alsa/serial-u16550.txt>.
 110           This driver works with serial UARTs 16550 and better.
 111
 112           This driver accesses the serial port hardware directly, so
 113           make sure that the standard serial driver isn't used or
 114           deactivated with setserial before loading this driver.
 115
 116           To compile this driver as a module, choose M here: the module
 117           will be called snd-serial-u16550.
 118
 119 config SND_MPU401
 120         tristate "Generic MPU-401 UART driver"
 121         depends on SND
 122         select SND_MPU401_UART
 123         help
 124           Say Y here to include support for MIDI ports compatible with
 125           the Roland MPU-401 interface in UART mode.
 126
 127           To compile this driver as a module, choose M here: the module
 128           will be called snd-mpu401.
 129
 130 config SND_PORTMAN2X4
 131         tristate "Portman 2x4 driver"
 132         depends on SND && PARPORT
 133         select SND_RAWMIDI
 134         help
 135           Say Y here to include support for Midiman Portman 2x4 parallel
 136           port MIDI device.
 137
 138           To compile this driver as a module, choose M here: the module
 139           will be called snd-portman2x4.
 140
 141 config SND_ML403_AC97CR
 142         tristate "Xilinx ML403 AC97 Controller Reference"
 143         depends on SND && XILINX_VIRTEX
 144         select SND_AC97_CODEC
 145         help
 146           Say Y here to include support for the
 147           opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403
 148           reference design.
 149
 150           To compile this driver as a module, choose M here: the module
 151           will be called snd-ml403_ac97cr.
 152
 153 endmenu