sound/drivers/Kconfig

   1 # ALSA generic drivers
   2
   3 menu "Generic devices"
   4         depends on SND!=n
   5
   6
   7 config SND_PCSP
   8         tristate "Internal PC speaker support"
   9         depends on X86_PC && HIGH_RES_TIMERS
  10         depends on INPUT
  11         depends on SND
  12         select SND_PCM
  13         help
  14           If you don't have a sound card in your computer, you can include a
  15           driver for the PC speaker which allows it to act like a primitive
  16           sound card.
  17           This driver also replaces the pcspkr driver for beeps.
  18
  19           You can compile this as a module which will be called snd-pcsp.
  20
  21           You don't need this driver if you only want your pc-speaker to beep.
  22           You don't need this driver if you have a tablet piezo beeper
  23           in your PC instead of the real speaker.
  24
  25           It should not hurt to say Y or M here in all other cases.
  26
  27 config SND_MPU401_UART
  28         tristate
  29         select SND_RAWMIDI
  30
  31 config SND_OPL3_LIB
  32         tristate
  33         select SND_TIMER
  34         select SND_HWDEP
  35
  36 config SND_OPL4_LIB
  37         tristate
  38         select SND_TIMER
  39         select SND_HWDEP
  40
  41 config SND_VX_LIB
  42         tristate
  43         select SND_HWDEP
  44         select SND_PCM
  45
  46 config SND_AC97_CODEC
  47         tristate
  48         select SND_PCM
  49         select AC97_BUS
  50
  51 config SND_DUMMY
  52         tristate "Dummy (/dev/null) soundcard"
  53         depends on SND
  54         select SND_PCM
  55         help
  56           Say Y here to include the dummy driver.  This driver does
  57           nothing, but emulates various mixer controls and PCM devices.
  58
  59           You don't need this unless you're testing the hardware support
  60           of programs using the ALSA API.
  61
  62           To compile this driver as a module, choose M here: the module
  63           will be called snd-dummy.
  64
  65 config SND_VIRMIDI
  66         tristate "Virtual MIDI soundcard"
  67         depends on SND_SEQUENCER
  68         select SND_TIMER
  69         select SND_RAWMIDI
  70         help
  71           Say Y here to include the virtual MIDI driver.  This driver
  72           allows to connect applications using raw MIDI devices to
  73           sequencer clients.
  74
  75           If you don't know what MIDI is, say N here.
  76
  77           To compile this driver as a module, choose M here: the module
  78           will be called snd-virmidi.
  79
  80 config SND_MTPAV
  81         tristate "MOTU MidiTimePiece AV multiport MIDI"
  82         depends on SND
  83         select SND_RAWMIDI
  84         help
  85           To use a MOTU MidiTimePiece AV multiport MIDI adapter
  86           connected to the parallel port, say Y here and make sure that
  87           the standard parallel port driver isn't used for the port.
  88
  89           To compile this driver as a module, choose M here: the module
  90           will be called snd-mtpav.
  91
  92 config SND_MTS64
  93         tristate "ESI Miditerminal 4140 driver"
  94         depends on SND && PARPORT
  95         select SND_RAWMIDI
  96         help
  97           The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with
  98           additional SMPTE Timecode capabilities for the parallel port.
  99
 100           Say 'Y' to include support for this device.
 101
 102           To compile this driver as a module, chose 'M' here: the module
 103           will be called snd-mts64.
 104
 105 config SND_SERIAL_U16550
 106         tristate "UART16550 serial MIDI driver"
 107         depends on SND
 108         select SND_RAWMIDI
 109         help
 110           To include support for MIDI serial port interfaces, say Y here
 111           and read <file:Documentation/sound/alsa/serial-u16550.txt>.
 112           This driver works with serial UARTs 16550 and better.
 113
 114           This driver accesses the serial port hardware directly, so
 115           make sure that the standard serial driver isn't used or
 116           deactivated with setserial before loading this driver.
 117
 118           To compile this driver as a module, choose M here: the module
 119           will be called snd-serial-u16550.
 120
 121 config SND_MPU401
 122         tristate "Generic MPU-401 UART driver"
 123         depends on SND
 124         select SND_MPU401_UART
 125         help
 126           Say Y here to include support for MIDI ports compatible with
 127           the Roland MPU-401 interface in UART mode.
 128
 129           To compile this driver as a module, choose M here: the module
 130           will be called snd-mpu401.
 131
 132 config SND_PORTMAN2X4
 133         tristate "Portman 2x4 driver"
 134         depends on SND && PARPORT
 135         select SND_RAWMIDI
 136         help
 137           Say Y here to include support for Midiman Portman 2x4 parallel
 138           port MIDI device.
 139
 140           To compile this driver as a module, choose M here: the module
 141           will be called snd-portman2x4.
 142
 143 config SND_ML403_AC97CR
 144         tristate "Xilinx ML403 AC97 Controller Reference"
 145         depends on SND && XILINX_VIRTEX
 146         select SND_AC97_CODEC
 147         help
 148           Say Y here to include support for the
 149           opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403
 150           reference design.
 151
 152           To compile this driver as a module, choose M here: the module
 153           will be called snd-ml403_ac97cr.
 154
 155 endmenu