net/dsa/mv88e6131.c

   1 /*
   2  * net/dsa/mv88e6131.c - Marvell 88e6095/6095f/6131 switch chip support
   3  * Copyright (c) 2008-2009 Marvell Semiconductor
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  */
  10
  11 #include <linux/list.h>
  12 #include <linux/netdevice.h>
  13 #include <linux/phy.h>
  14 #include "dsa_priv.h"
  15 #include "mv88e6xxx.h"
  16
  17 /*
  18  * Switch product IDs
  19  */
  20 #define ID_6085         0x04a0
  21 #define ID_6095         0x0950
  22 #define ID_6131         0x1060
  23
  24 static char *mv88e6131_probe(struct mii_bus *bus, int sw_addr)
  25 {
  26         int ret;
  27
  28         ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
  29         if (ret >= 0) {
  30                 ret &= 0xfff0;
  31                 if (ret == ID_6085)
  32                         return "Marvell 88E6085";
  33                 if (ret == ID_6095)
  34                         return "Marvell 88E6095/88E6095F";
  35                 if (ret == ID_6131)
  36                         return "Marvell 88E6131";
  37         }
  38
  39         return NULL;
  40 }
  41
  42 static int mv88e6131_switch_reset(struct dsa_switch *ds)
  43 {
  44         int i;
  45         int ret;
  46
  47         /*
  48          * Set all ports to the disabled state.
  49          */
  50         for (i = 0; i < 11; i++) {
  51                 ret = REG_READ(REG_PORT(i), 0x04);
  52                 REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
  53         }
  54
  55         /*
  56          * Wait for transmit queues to drain.
  57          */
  58         msleep(2);
  59
  60         /*
  61          * Reset the switch.
  62          */
  63         REG_WRITE(REG_GLOBAL, 0x04, 0xc400);
  64
  65         /*
  66          * Wait up to one second for reset to complete.
  67          */
  68         for (i = 0; i < 1000; i++) {
  69                 ret = REG_READ(REG_GLOBAL, 0x00);
  70                 if ((ret & 0xc800) == 0xc800)
  71                         break;
  72
  73                 msleep(1);
  74         }
  75         if (i == 1000)
  76                 return -ETIMEDOUT;
  77
  78         return 0;
  79 }
  80
  81 static int mv88e6131_setup_global(struct dsa_switch *ds)
  82 {
  83         int ret;
  84         int i;
  85
  86         /*
  87          * Enable the PHY polling unit, don't discard packets with
  88          * excessive collisions, use a weighted fair queueing scheme
  89          * to arbitrate between packet queues, set the maximum frame
  90          * size to 1632, and mask all interrupt sources.
  91          */
  92         REG_WRITE(REG_GLOBAL, 0x04, 0x4400);
  93
  94         /*
  95          * Set the default address aging time to 5 minutes, and
  96          * enable address learn messages to be sent to all message
  97          * ports.
  98          */
  99         REG_WRITE(REG_GLOBAL, 0x0a, 0x0148);
 100
 101         /*
 102          * Configure the priority mapping registers.
 103          */
 104         ret = mv88e6xxx_config_prio(ds);
 105         if (ret < 0)
 106                 return ret;
 107
 108         /*
 109          * Set the VLAN ethertype to 0x8100.
 110          */
 111         REG_WRITE(REG_GLOBAL, 0x19, 0x8100);
 112
 113         /*
 114          * Disable ARP mirroring, and configure the upstream port as
 115          * the port to which ingress and egress monitor frames are to
 116          * be sent.
 117          */
 118         REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0);
 119
 120         /*
 121          * Disable cascade port functionality, and set the switch's
 122          * DSA device number.
 123          */
 124         REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f));
 125
 126         /*
 127          * Send all frames with destination addresses matching
 128          * 01:80:c2:00:00:0x to the CPU port.
 129          */
 130         REG_WRITE(REG_GLOBAL2, 0x03, 0xffff);
 131
 132         /*
 133          * Ignore removed tag data on doubly tagged packets, disable
 134          * flow control messages, force flow control priority to the
 135          * highest, and send all special multicast frames to the CPU
 136          * port at the highest priority.
 137          */
 138         REG_WRITE(REG_GLOBAL2, 0x05, 0x00ff);
 139
 140         /*
 141          * Program the DSA routing table.
 142          */
 143         for (i = 0; i < 32; i++) {
 144                 int nexthop;
 145
 146                 nexthop = 0x1f;
 147                 if (i != ds->index && i < ds->dst->pd->nr_chips)
 148                         nexthop = ds->pd->rtable[i] & 0x1f;
 149
 150                 REG_WRITE(REG_GLOBAL2, 0x06, 0x8000 | (i << 8) | nexthop);
 151         }
 152
 153         /*
 154          * Clear all trunk masks.
 155          */
 156         for (i = 0; i < 8; i++)
 157                 REG_WRITE(REG_GLOBAL2, 0x07, 0x8000 | (i << 12) | 0x7ff);
 158
 159         /*
 160          * Clear all trunk mappings.
 161          */
 162         for (i = 0; i < 16; i++)
 163                 REG_WRITE(REG_GLOBAL2, 0x08, 0x8000 | (i << 11));
 164
 165         /*
 166          * Force the priority of IGMP/MLD snoop frames and ARP frames
 167          * to the highest setting.
 168          */
 169         REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff);
 170
 171         return 0;
 172 }
 173
 174 static int mv88e6131_setup_port(struct dsa_switch *ds, int p)
 175 {
 176         struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
 177         int addr = REG_PORT(p);
 178         u16 val;
 179
 180         /*
 181          * MAC Forcing register: don't force link, speed, duplex
 182          * or flow control state to any particular values on physical
 183          * ports, but force the CPU port and all DSA ports to 1000 Mb/s
 184          * (100 Mb/s on 6085) full duplex.
 185          */
 186         if (dsa_is_cpu_port(ds, p) || ds->dsa_port_mask & (1 << p))
 187                 if (ps->id == ID_6085)
 188                         REG_WRITE(addr, 0x01, 0x003d); /* 100 Mb/s */
 189                 else
 190                         REG_WRITE(addr, 0x01, 0x003e); /* 1000 Mb/s */
 191         else
 192                 REG_WRITE(addr, 0x01, 0x0003);
 193
 194         /*
 195          * Port Control: disable Core Tag, disable Drop-on-Lock,
 196          * transmit frames unmodified, disable Header mode,
 197          * enable IGMP/MLD snoop, disable DoubleTag, disable VLAN
 198          * tunneling, determine priority by looking at 802.1p and
 199          * IP priority fields (IP prio has precedence), and set STP
 200          * state to Forwarding.
 201          *
 202          * If this is the upstream port for this switch, enable
 203          * forwarding of unknown unicasts, and enable DSA tagging
 204          * mode.
 205          *
 206          * If this is the link to another switch, use DSA tagging
 207          * mode, but do not enable forwarding of unknown unicasts.
 208          */
 209         val = 0x0433;
 210         if (p == dsa_upstream_port(ds))
 211                 val |= 0x0104;
 212         if (ds->dsa_port_mask & (1 << p))
 213                 val |= 0x0100;
 214         REG_WRITE(addr, 0x04, val);
 215
 216         /*
 217          * Port Control 1: disable trunking.  Also, if this is the
 218          * CPU port, enable learn messages to be sent to this port.
 219          */
 220         REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
 221
 222         /*
 223          * Port based VLAN map: give each port its own address
 224          * database, allow the CPU port to talk to each of the 'real'
 225          * ports, and allow each of the 'real' ports to only talk to
 226          * the upstream port.
 227          */
 228         val = (p & 0xf) << 12;
 229         if (dsa_is_cpu_port(ds, p))
 230                 val |= ds->phys_port_mask;
 231         else
 232                 val |= 1 << dsa_upstream_port(ds);
 233         REG_WRITE(addr, 0x06, val);
 234
 235         /*
 236          * Default VLAN ID and priority: don't set a default VLAN
 237          * ID, and set the default packet priority to zero.
 238          */
 239         REG_WRITE(addr, 0x07, 0x0000);
 240
 241         /*
 242          * Port Control 2: don't force a good FCS, don't use
 243          * VLAN-based, source address-based or destination
 244          * address-based priority overrides, don't let the switch
 245          * add or strip 802.1q tags, don't discard tagged or
 246          * untagged frames on this port, do a destination address
 247          * lookup on received packets as usual, don't send a copy
 248          * of all transmitted/received frames on this port to the
 249          * CPU, and configure the upstream port number.
 250          *
 251          * If this is the upstream port for this switch, enable
 252          * forwarding of unknown multicast addresses.
 253          */
 254         val = 0x0080 | dsa_upstream_port(ds);
 255         if (p == dsa_upstream_port(ds))
 256                 val |= 0x0040;
 257         REG_WRITE(addr, 0x08, val);
 258
 259         /*
 260          * Rate Control: disable ingress rate limiting.
 261          */
 262         REG_WRITE(addr, 0x09, 0x0000);
 263
 264         /*
 265          * Rate Control 2: disable egress rate limiting.
 266          */
 267         REG_WRITE(addr, 0x0a, 0x0000);
 268
 269         /*
 270          * Port Association Vector: when learning source addresses
 271          * of packets, add the address to the address database using
 272          * a port bitmap that has only the bit for this port set and
 273          * the other bits clear.
 274          */
 275         REG_WRITE(addr, 0x0b, 1 << p);
 276
 277         /*
 278          * Tag Remap: use an identity 802.1p prio -> switch prio
 279          * mapping.
 280          */
 281         REG_WRITE(addr, 0x18, 0x3210);
 282
 283         /*
 284          * Tag Remap 2: use an identity 802.1p prio -> switch prio
 285          * mapping.
 286          */
 287         REG_WRITE(addr, 0x19, 0x7654);
 288
 289         return 0;
 290 }
 291
 292 static int mv88e6131_setup(struct dsa_switch *ds)
 293 {
 294         struct mv88e6xxx_priv_state *ps = (void *)(ds + 1);
 295         int i;
 296         int ret;
 297
 298         mutex_init(&ps->smi_mutex);
 299         mv88e6xxx_ppu_state_init(ds);
 300         mutex_init(&ps->stats_mutex);
 301
 302         ps->id = REG_READ(REG_PORT(0), 0x03) & 0xfff0;
 303
 304         ret = mv88e6131_switch_reset(ds);
 305         if (ret < 0)
 306                 return ret;
 307
 308         /* @@@ initialise vtu and atu */
 309
 310         ret = mv88e6131_setup_global(ds);
 311         if (ret < 0)
 312                 return ret;
 313
 314         for (i = 0; i < 11; i++) {
 315                 ret = mv88e6131_setup_port(ds, i);
 316                 if (ret < 0)
 317                         return ret;
 318         }
 319
 320         return 0;
 321 }
 322
 323 static int mv88e6131_port_to_phy_addr(int port)
 324 {
 325         if (port >= 0 && port <= 11)
 326                 return port;
 327         return -1;
 328 }
 329
 330 static int
 331 mv88e6131_phy_read(struct dsa_switch *ds, int port, int regnum)
 332 {
 333         int addr = mv88e6131_port_to_phy_addr(port);
 334         return mv88e6xxx_phy_read_ppu(ds, addr, regnum);
 335 }
 336
 337 static int
 338 mv88e6131_phy_write(struct dsa_switch *ds,
 339                               int port, int regnum, u16 val)
 340 {
 341         int addr = mv88e6131_port_to_phy_addr(port);
 342         return mv88e6xxx_phy_write_ppu(ds, addr, regnum, val);
 343 }
 344
 345 static struct mv88e6xxx_hw_stat mv88e6131_hw_stats[] = {
 346         { "in_good_octets", 8, 0x00, },
 347         { "in_bad_octets", 4, 0x02, },
 348         { "in_unicast", 4, 0x04, },
 349         { "in_broadcasts", 4, 0x06, },
 350         { "in_multicasts", 4, 0x07, },
 351         { "in_pause", 4, 0x16, },
 352         { "in_undersize", 4, 0x18, },
 353         { "in_fragments", 4, 0x19, },
 354         { "in_oversize", 4, 0x1a, },
 355         { "in_jabber", 4, 0x1b, },
 356         { "in_rx_error", 4, 0x1c, },
 357         { "in_fcs_error", 4, 0x1d, },
 358         { "out_octets", 8, 0x0e, },
 359         { "out_unicast", 4, 0x10, },
 360         { "out_broadcasts", 4, 0x13, },
 361         { "out_multicasts", 4, 0x12, },
 362         { "out_pause", 4, 0x15, },
 363         { "excessive", 4, 0x11, },
 364         { "collisions", 4, 0x1e, },
 365         { "deferred", 4, 0x05, },
 366         { "single", 4, 0x14, },
 367         { "multiple", 4, 0x17, },
 368         { "out_fcs_error", 4, 0x03, },
 369         { "late", 4, 0x1f, },
 370         { "hist_64bytes", 4, 0x08, },
 371         { "hist_65_127bytes", 4, 0x09, },
 372         { "hist_128_255bytes", 4, 0x0a, },
 373         { "hist_256_511bytes", 4, 0x0b, },
 374         { "hist_512_1023bytes", 4, 0x0c, },
 375         { "hist_1024_max_bytes", 4, 0x0d, },
 376 };
 377
 378 static void
 379 mv88e6131_get_strings(struct dsa_switch *ds, int port, uint8_t *data)
 380 {
 381         mv88e6xxx_get_strings(ds, ARRAY_SIZE(mv88e6131_hw_stats),
 382                               mv88e6131_hw_stats, port, data);
 383 }
 384
 385 static void
 386 mv88e6131_get_ethtool_stats(struct dsa_switch *ds,
 387                                   int port, uint64_t *data)
 388 {
 389         mv88e6xxx_get_ethtool_stats(ds, ARRAY_SIZE(mv88e6131_hw_stats),
 390                                     mv88e6131_hw_stats, port, data);
 391 }
 392
 393 static int mv88e6131_get_sset_count(struct dsa_switch *ds)
 394 {
 395         return ARRAY_SIZE(mv88e6131_hw_stats);
 396 }
 397
 398 static struct dsa_switch_driver mv88e6131_switch_driver = {
 399         .tag_protocol           = cpu_to_be16(ETH_P_DSA),
 400         .priv_size              = sizeof(struct mv88e6xxx_priv_state),
 401         .probe                  = mv88e6131_probe,
 402         .setup                  = mv88e6131_setup,
 403         .set_addr               = mv88e6xxx_set_addr_direct,
 404         .phy_read               = mv88e6131_phy_read,
 405         .phy_write              = mv88e6131_phy_write,
 406         .poll_link              = mv88e6xxx_poll_link,
 407         .get_strings            = mv88e6131_get_strings,
 408         .get_ethtool_stats      = mv88e6131_get_ethtool_stats,
 409         .get_sset_count         = mv88e6131_get_sset_count,
 410 };
 411
 412 static int __init mv88e6131_init(void)
 413 {
 414         register_switch_driver(&mv88e6131_switch_driver);
 415         return 0;
 416 }
 417 module_init(mv88e6131_init);
 418
 419 static void __exit mv88e6131_cleanup(void)
 420 {
 421         unregister_switch_driver(&mv88e6131_switch_driver);
 422 }
 423 module_exit(mv88e6131_cleanup);