Linux-2.6.12-rc2
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / linux / seqlock.h
1 #ifndef __LINUX_SEQLOCK_H
2 #define __LINUX_SEQLOCK_H
3 /*
4 * Reader/writer consistent mechanism without starving writers. This type of
5 * lock for data where the reader wants a consitent set of information
6 * and is willing to retry if the information changes. Readers never
7 * block but they may have to retry if a writer is in
8 * progress. Writers do not wait for readers.
9 *
10 * This is not as cache friendly as brlock. Also, this will not work
11 * for data that contains pointers, because any writer could
12 * invalidate a pointer that a reader was following.
13 *
14 * Expected reader usage:
15 * do {
16 * seq = read_seqbegin(&foo);
17 * ...
18 * } while (read_seqretry(&foo, seq));
19 *
20 *
21 * On non-SMP the spin locks disappear but the writer still needs
22 * to increment the sequence variables because an interrupt routine could
23 * change the state of the data.
24 *
25 * Based on x86_64 vsyscall gettimeofday
26 * by Keith Owens and Andrea Arcangeli
27 */
28
29 #include <linux/config.h>
30 #include <linux/spinlock.h>
31 #include <linux/preempt.h>
32
33 typedef struct {
34 unsigned sequence;
35 spinlock_t lock;
36 } seqlock_t;
37
38 /*
39 * These macros triggered gcc-3.x compile-time problems. We think these are
40 * OK now. Be cautious.
41 */
42 #define SEQLOCK_UNLOCKED { 0, SPIN_LOCK_UNLOCKED }
43 #define seqlock_init(x) do { *(x) = (seqlock_t) SEQLOCK_UNLOCKED; } while (0)
44
45
46 /* Lock out other writers and update the count.
47 * Acts like a normal spin_lock/unlock.
48 * Don't need preempt_disable() because that is in the spin_lock already.
49 */
50 static inline void write_seqlock(seqlock_t *sl)
51 {
52 spin_lock(&sl->lock);
53 ++sl->sequence;
54 smp_wmb();
55 }
56
57 static inline void write_sequnlock(seqlock_t *sl)
58 {
59 smp_wmb();
60 sl->sequence++;
61 spin_unlock(&sl->lock);
62 }
63
64 static inline int write_tryseqlock(seqlock_t *sl)
65 {
66 int ret = spin_trylock(&sl->lock);
67
68 if (ret) {
69 ++sl->sequence;
70 smp_wmb();
71 }
72 return ret;
73 }
74
75 /* Start of read calculation -- fetch last complete writer token */
76 static inline unsigned read_seqbegin(const seqlock_t *sl)
77 {
78 unsigned ret = sl->sequence;
79 smp_rmb();
80 return ret;
81 }
82
83 /* Test if reader processed invalid data.
84 * If initial values is odd,
85 * then writer had already started when section was entered
86 * If sequence value changed
87 * then writer changed data while in section
88 *
89 * Using xor saves one conditional branch.
90 */
91 static inline int read_seqretry(const seqlock_t *sl, unsigned iv)
92 {
93 smp_rmb();
94 return (iv & 1) | (sl->sequence ^ iv);
95 }
96
97
98 /*
99 * Version using sequence counter only.
100 * This can be used when code has its own mutex protecting the
101 * updating starting before the write_seqcountbeqin() and ending
102 * after the write_seqcount_end().
103 */
104
105 typedef struct seqcount {
106 unsigned sequence;
107 } seqcount_t;
108
109 #define SEQCNT_ZERO { 0 }
110 #define seqcount_init(x) do { *(x) = (seqcount_t) SEQCNT_ZERO; } while (0)
111
112 /* Start of read using pointer to a sequence counter only. */
113 static inline unsigned read_seqcount_begin(const seqcount_t *s)
114 {
115 unsigned ret = s->sequence;
116 smp_rmb();
117 return ret;
118 }
119
120 /* Test if reader processed invalid data.
121 * Equivalent to: iv is odd or sequence number has changed.
122 * (iv & 1) || (*s != iv)
123 * Using xor saves one conditional branch.
124 */
125 static inline int read_seqcount_retry(const seqcount_t *s, unsigned iv)
126 {
127 smp_rmb();
128 return (iv & 1) | (s->sequence ^ iv);
129 }
130
131
132 /*
133 * Sequence counter only version assumes that callers are using their
134 * own mutexing.
135 */
136 static inline void write_seqcount_begin(seqcount_t *s)
137 {
138 s->sequence++;
139 smp_wmb();
140 }
141
142 static inline void write_seqcount_end(seqcount_t *s)
143 {
144 smp_wmb();
145 s->sequence++;
146 }
147
148 /*
149 * Possible sw/hw IRQ protected versions of the interfaces.
150 */
151 #define write_seqlock_irqsave(lock, flags) \
152 do { local_irq_save(flags); write_seqlock(lock); } while (0)
153 #define write_seqlock_irq(lock) \
154 do { local_irq_disable(); write_seqlock(lock); } while (0)
155 #define write_seqlock_bh(lock) \
156 do { local_bh_disable(); write_seqlock(lock); } while (0)
157
158 #define write_sequnlock_irqrestore(lock, flags) \
159 do { write_sequnlock(lock); local_irq_restore(flags); } while(0)
160 #define write_sequnlock_irq(lock) \
161 do { write_sequnlock(lock); local_irq_enable(); } while(0)
162 #define write_sequnlock_bh(lock) \
163 do { write_sequnlock(lock); local_bh_enable(); } while(0)
164
165 #define read_seqbegin_irqsave(lock, flags) \
166 ({ local_irq_save(flags); read_seqbegin(lock); })
167
168 #define read_seqretry_irqrestore(lock, iv, flags) \
169 ({ \
170 int ret = read_seqretry(lock, iv); \
171 local_irq_restore(flags); \
172 ret; \
173 })
174
175 #endif /* __LINUX_SEQLOCK_H */