nlm: Ensure callback code also checks that the files match
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / include / linux / mfd / si476x-core.h
1 /*
2 * include/media/si476x-core.h -- Common definitions for si476x core
3 * device
4 *
5 * Copyright (C) 2012 Innovative Converged Devices(ICD)
6 * Copyright (C) 2013 Andrey Smirnov
7 *
8 * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; version 2 of the License.
13 *
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
18 *
19 */
20
21 #ifndef SI476X_CORE_H
22 #define SI476X_CORE_H
23
24 #include <linux/kfifo.h>
25 #include <linux/atomic.h>
26 #include <linux/i2c.h>
27 #include <linux/regmap.h>
28 #include <linux/mutex.h>
29 #include <linux/mfd/core.h>
30 #include <linux/videodev2.h>
31 #include <linux/regulator/consumer.h>
32
33 #include <linux/mfd/si476x-platform.h>
34 #include <linux/mfd/si476x-reports.h>
35
36 /* Command Timeouts */
37 #define SI476X_DEFAULT_TIMEOUT 100000
38 #define SI476X_TIMEOUT_TUNE 700000
39 #define SI476X_TIMEOUT_POWER_UP 330000
40 #define SI476X_STATUS_POLL_US 0
41
42 /* -------------------- si476x-i2c.c ----------------------- */
43
44 enum si476x_freq_supported_chips {
45 SI476X_CHIP_SI4761 = 1,
46 SI476X_CHIP_SI4764,
47 SI476X_CHIP_SI4768,
48 };
49
50 enum si476x_part_revisions {
51 SI476X_REVISION_A10 = 0,
52 SI476X_REVISION_A20 = 1,
53 SI476X_REVISION_A30 = 2,
54 };
55
56 enum si476x_mfd_cells {
57 SI476X_RADIO_CELL = 0,
58 SI476X_CODEC_CELL,
59 SI476X_MFD_CELLS,
60 };
61
62 /**
63 * enum si476x_power_state - possible power state of the si476x
64 * device.
65 *
66 * @SI476X_POWER_DOWN: In this state all regulators are turned off
67 * and the reset line is pulled low. The device is completely
68 * inactive.
69 * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
70 * turned on, reset line pulled high, IRQ line is enabled(polling is
71 * active for polling use scenario) and device is turned on with
72 * POWER_UP command. The device is ready to be used.
73 * @SI476X_POWER_INCONSISTENT: This state indicates that previous
74 * power down was inconsistent, meaning some of the regulators were
75 * not turned down and thus use of the device, without power-cycling
76 * is impossible.
77 */
78 enum si476x_power_state {
79 SI476X_POWER_DOWN = 0,
80 SI476X_POWER_UP_FULL = 1,
81 SI476X_POWER_INCONSISTENT = 2,
82 };
83
84 /**
85 * struct si476x_core - internal data structure representing the
86 * underlying "core" device which all the MFD cell-devices use.
87 *
88 * @client: Actual I2C client used to transfer commands to the chip.
89 * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
90 * @cells: MFD cell devices created by this driver.
91 * @cmd_lock: Mutex used to serialize all the requests to the core
92 * device. This filed should not be used directly. Instead
93 * si476x_core_lock()/si476x_core_unlock() should be used to get
94 * exclusive access to the "core" device.
95 * @users: Active users counter(Used by the radio cell)
96 * @rds_read_queue: Wait queue used to wait for RDS data.
97 * @rds_fifo: FIFO in which all the RDS data received from the chip is
98 * placed.
99 * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
100 * @rds_drainer_is_working: Flag used for launching only one instance
101 * of the @rds_fifo_drainer.
102 * @rds_drainer_status_lock: Lock used to guard access to the
103 * @rds_drainer_is_working variable.
104 * @command: Wait queue for wainting on the command comapletion.
105 * @cts: Clear To Send flag set upon receiving first status with CTS
106 * set.
107 * @tuning: Wait queue used for wainting for tune/seek comand
108 * completion.
109 * @stc: Similar to @cts, but for the STC bit of the status value.
110 * @power_up_parameters: Parameters used as argument for POWER_UP
111 * command when the device is started.
112 * @state: Current power state of the device.
113 * @supplues: Structure containing handles to all power supplies used
114 * by the device (NULL ones are ignored).
115 * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
116 * @pinmux: Chip's configurable pins configuration.
117 * @diversity_mode: Chips role when functioning in diversity mode.
118 * @status_monitor: Polling worker used in polling use case scenarion
119 * (when IRQ is not avalible).
120 * @revision: Chip's running firmware revision number(Used for correct
121 * command set support).
122 */
123
124 struct si476x_core {
125 struct i2c_client *client;
126 struct regmap *regmap;
127 int chip_id;
128 struct mfd_cell cells[SI476X_MFD_CELLS];
129
130 struct mutex cmd_lock; /* for serializing fm radio operations */
131 atomic_t users;
132
133 wait_queue_head_t rds_read_queue;
134 struct kfifo rds_fifo;
135 struct work_struct rds_fifo_drainer;
136 bool rds_drainer_is_working;
137 struct mutex rds_drainer_status_lock;
138
139 wait_queue_head_t command;
140 atomic_t cts;
141
142 wait_queue_head_t tuning;
143 atomic_t stc;
144
145 struct si476x_power_up_args power_up_parameters;
146
147 enum si476x_power_state power_state;
148
149 struct regulator_bulk_data supplies[4];
150
151 int gpio_reset;
152
153 struct si476x_pinmux pinmux;
154 enum si476x_phase_diversity_mode diversity_mode;
155
156 atomic_t is_alive;
157
158 struct delayed_work status_monitor;
159 #define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
160 struct si476x_core, \
161 status_monitor)
162
163 int revision;
164
165 int rds_fifo_depth;
166 };
167
168 static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
169 {
170 struct i2c_client *client = to_i2c_client(dev->parent);
171 return i2c_get_clientdata(client);
172 }
173
174
175 /**
176 * si476x_core_lock() - lock the core device to get an exclusive access
177 * to it.
178 */
179 static inline void si476x_core_lock(struct si476x_core *core)
180 {
181 mutex_lock(&core->cmd_lock);
182 }
183
184 /**
185 * si476x_core_unlock() - unlock the core device to relinquish an
186 * exclusive access to it.
187 */
188 static inline void si476x_core_unlock(struct si476x_core *core)
189 {
190 mutex_unlock(&core->cmd_lock);
191 }
192
193 /* *_TUNE_FREQ family of commands accept frequency in multiples of
194 10kHz */
195 static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
196 {
197 u16 result;
198
199 switch (core->power_up_parameters.func) {
200 default:
201 case SI476X_FUNC_FM_RECEIVER:
202 result = freq / 10000;
203 break;
204 case SI476X_FUNC_AM_RECEIVER:
205 result = freq / 1000;
206 break;
207 }
208
209 return result;
210 }
211
212 static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
213 {
214 int result;
215
216 switch (core->power_up_parameters.func) {
217 default:
218 case SI476X_FUNC_FM_RECEIVER:
219 result = freq * 10000;
220 break;
221 case SI476X_FUNC_AM_RECEIVER:
222 result = freq * 1000;
223 break;
224 }
225
226 return result;
227 }
228
229 /* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
230 * mesures frequency in 62.5 Hz units */
231
232 static inline int hz_to_v4l2(int freq)
233 {
234 return (freq * 10) / 625;
235 }
236
237 static inline int v4l2_to_hz(int freq)
238 {
239 return (freq * 625) / 10;
240 }
241
242 static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
243 {
244 return hz_to_si476x(core, v4l2_to_hz(freq));
245 }
246
247 static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
248 {
249 return hz_to_v4l2(si476x_to_hz(core, freq));
250 }
251
252
253
254 /**
255 * struct si476x_func_info - structure containing result of the
256 * FUNC_INFO command.
257 *
258 * @firmware.major: Firmware major number.
259 * @firmware.minor[...]: Firmware minor numbers.
260 * @patch_id:
261 * @func: Mode tuner is working in.
262 */
263 struct si476x_func_info {
264 struct {
265 u8 major, minor[2];
266 } firmware;
267 u16 patch_id;
268 enum si476x_func func;
269 };
270
271 /**
272 * struct si476x_power_down_args - structure used to pass parameters
273 * to POWER_DOWN command
274 *
275 * @xosc: true - Power down, but leav oscillator running.
276 * false - Full power down.
277 */
278 struct si476x_power_down_args {
279 bool xosc;
280 };
281
282 /**
283 * enum si476x_tunemode - enum representing possible tune modes for
284 * the chip.
285 * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
286 * channel after tune, tune status is valid.
287 * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
288 * channel after tune, tune status invalid.
289 * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
290 * metric thresholds are not met.
291 * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
292 * previous channel.
293 */
294 enum si476x_tunemode {
295 SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
296 SI476X_TM_INVALIDATED_FAST_TUNE = 1,
297 SI476X_TM_VALIDATED_AF_TUNE = 2,
298 SI476X_TM_VALIDATED_AF_CHECK = 3,
299 };
300
301 /**
302 * enum si476x_smoothmetrics - enum containing the possible setting fo
303 * audio transitioning of the chip
304 * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
305 * new channel
306 * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
307 * channel values to the new values
308 */
309 enum si476x_smoothmetrics {
310 SI476X_SM_INITIALIZE_AUDIO = 0,
311 SI476X_SM_TRANSITION_AUDIO = 1,
312 };
313
314 /**
315 * struct si476x_rds_status_report - the structure representing the
316 * response to 'FM_RD_STATUS' command
317 * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
318 * code has changed.
319 * @rdspiint: Program indentifiaction(PI) code has changed.
320 * @rdssyncint: RDS synchronization has changed.
321 * @rdsfifoint: RDS was received and the RDS FIFO has at least
322 * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
323 * @tpptyvalid: TP flag and PTY code are valid falg.
324 * @pivalid: PI code is valid flag.
325 * @rdssync: RDS is currently synchronized.
326 * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
327 * @tp: Current channel's TP flag.
328 * @pty: Current channel's PTY code.
329 * @pi: Current channel's PI code.
330 * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
331 * empty).
332 */
333 struct si476x_rds_status_report {
334 bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
335 bool tpptyvalid, pivalid, rdssync, rdsfifolost;
336 bool tp;
337
338 u8 pty;
339 u16 pi;
340
341 u8 rdsfifoused;
342 u8 ble[4];
343
344 struct v4l2_rds_data rds[4];
345 };
346
347 struct si476x_rsq_status_args {
348 bool primary;
349 bool rsqack;
350 bool attune;
351 bool cancel;
352 bool stcack;
353 };
354
355 enum si476x_injside {
356 SI476X_INJSIDE_AUTO = 0,
357 SI476X_INJSIDE_LOW = 1,
358 SI476X_INJSIDE_HIGH = 2,
359 };
360
361 struct si476x_tune_freq_args {
362 bool zifsr;
363 bool hd;
364 enum si476x_injside injside;
365 int freq;
366 enum si476x_tunemode tunemode;
367 enum si476x_smoothmetrics smoothmetrics;
368 int antcap;
369 };
370
371 int si476x_core_stop(struct si476x_core *, bool);
372 int si476x_core_start(struct si476x_core *, bool);
373 int si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
374 bool si476x_core_has_am(struct si476x_core *);
375 bool si476x_core_has_diversity(struct si476x_core *);
376 bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
377 bool si476x_core_is_a_primary_tuner(struct si476x_core *);
378 bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
379 bool si476x_core_is_powered_up(struct si476x_core *core);
380
381 enum si476x_i2c_type {
382 SI476X_I2C_SEND,
383 SI476X_I2C_RECV
384 };
385
386 int si476x_core_i2c_xfer(struct si476x_core *,
387 enum si476x_i2c_type,
388 char *, int);
389
390
391 /* -------------------- si476x-cmd.c ----------------------- */
392
393 int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
394 int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
395 int si476x_core_cmd_get_property(struct si476x_core *, u16);
396 int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
397 enum si476x_dclk_config,
398 enum si476x_dfs_config,
399 enum si476x_dout_config,
400 enum si476x_xout_config);
401 int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
402 enum si476x_iqclk_config,
403 enum si476x_iqfs_config,
404 enum si476x_iout_config,
405 enum si476x_qout_config);
406 int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
407 enum si476x_icin_config,
408 enum si476x_icip_config,
409 enum si476x_icon_config,
410 enum si476x_icop_config);
411 int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
412 enum si476x_lrout_config);
413 int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
414 enum si476x_a1_config);
415 int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
416 int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
417 int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
418 struct si476x_rds_status_report *);
419 int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
420 struct si476x_rds_blockcount_report *);
421 int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
422 struct si476x_tune_freq_args *);
423 int si476x_core_cmd_am_tune_freq(struct si476x_core *,
424 struct si476x_tune_freq_args *);
425 int si476x_core_cmd_am_rsq_status(struct si476x_core *,
426 struct si476x_rsq_status_args *,
427 struct si476x_rsq_status_report *);
428 int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
429 struct si476x_rsq_status_args *,
430 struct si476x_rsq_status_report *);
431 int si476x_core_cmd_power_up(struct si476x_core *,
432 struct si476x_power_up_args *);
433 int si476x_core_cmd_power_down(struct si476x_core *,
434 struct si476x_power_down_args *);
435 int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
436 int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
437 enum si476x_phase_diversity_mode);
438
439 int si476x_core_cmd_fm_acf_status(struct si476x_core *,
440 struct si476x_acf_status_report *);
441 int si476x_core_cmd_am_acf_status(struct si476x_core *,
442 struct si476x_acf_status_report *);
443 int si476x_core_cmd_agc_status(struct si476x_core *,
444 struct si476x_agc_status_report *);
445
446 enum si476x_power_grid_type {
447 SI476X_POWER_GRID_50HZ = 0,
448 SI476X_POWER_GRID_60HZ,
449 };
450
451 /* Properties */
452
453 enum si476x_interrupt_flags {
454 SI476X_STCIEN = (1 << 0),
455 SI476X_ACFIEN = (1 << 1),
456 SI476X_RDSIEN = (1 << 2),
457 SI476X_RSQIEN = (1 << 3),
458
459 SI476X_ERRIEN = (1 << 6),
460 SI476X_CTSIEN = (1 << 7),
461
462 SI476X_STCREP = (1 << 8),
463 SI476X_ACFREP = (1 << 9),
464 SI476X_RDSREP = (1 << 10),
465 SI476X_RSQREP = (1 << 11),
466 };
467
468 enum si476x_rdsint_sources {
469 SI476X_RDSTPPTY = (1 << 4),
470 SI476X_RDSPI = (1 << 3),
471 SI476X_RDSSYNC = (1 << 1),
472 SI476X_RDSRECV = (1 << 0),
473 };
474
475 enum si476x_status_response_bits {
476 SI476X_CTS = (1 << 7),
477 SI476X_ERR = (1 << 6),
478 /* Status response for WB receiver */
479 SI476X_WB_ASQ_INT = (1 << 4),
480 SI476X_RSQ_INT = (1 << 3),
481 /* Status response for FM receiver */
482 SI476X_FM_RDS_INT = (1 << 2),
483 SI476X_ACF_INT = (1 << 1),
484 SI476X_STC_INT = (1 << 0),
485 };
486
487 /* -------------------- si476x-prop.c ----------------------- */
488
489 enum si476x_common_receiver_properties {
490 SI476X_PROP_INT_CTL_ENABLE = 0x0000,
491 SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE = 0x0200,
492 SI476X_PROP_DIGITAL_IO_INPUT_FORMAT = 0x0201,
493 SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE = 0x0202,
494 SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT = 0x0203,
495
496 SI476X_PROP_SEEK_BAND_BOTTOM = 0x1100,
497 SI476X_PROP_SEEK_BAND_TOP = 0x1101,
498 SI476X_PROP_SEEK_FREQUENCY_SPACING = 0x1102,
499
500 SI476X_PROP_VALID_MAX_TUNE_ERROR = 0x2000,
501 SI476X_PROP_VALID_SNR_THRESHOLD = 0x2003,
502 SI476X_PROP_VALID_RSSI_THRESHOLD = 0x2004,
503 };
504
505 enum si476x_am_receiver_properties {
506 SI476X_PROP_AUDIO_PWR_LINE_FILTER = 0x0303,
507 };
508
509 enum si476x_fm_receiver_properties {
510 SI476X_PROP_AUDIO_DEEMPHASIS = 0x0302,
511
512 SI476X_PROP_FM_RDS_INTERRUPT_SOURCE = 0x4000,
513 SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT = 0x4001,
514 SI476X_PROP_FM_RDS_CONFIG = 0x4002,
515 };
516
517 enum si476x_prop_audio_pwr_line_filter_bits {
518 SI476X_PROP_PWR_HARMONICS_MASK = 0x001f,
519 SI476X_PROP_PWR_GRID_MASK = 0x0100,
520 SI476X_PROP_PWR_ENABLE_MASK = 0x0200,
521 SI476X_PROP_PWR_GRID_50HZ = 0x0000,
522 SI476X_PROP_PWR_GRID_60HZ = 0x0100,
523 };
524
525 enum si476x_prop_fm_rds_config_bits {
526 SI476X_PROP_RDSEN_MASK = 0x1,
527 SI476X_PROP_RDSEN = 0x1,
528 };
529
530
531 struct regmap *devm_regmap_init_si476x(struct si476x_core *);
532
533 #endif /* SI476X_CORE_H */