include/acpi/actbl.h

   1 /******************************************************************************
   2  *
   3  * Name: actbl.h - Table data structures defined in ACPI specification
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2005, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #ifndef __ACTBL_H__
  45 #define __ACTBL_H__
  46
  47 /*
  48  * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
  49  * This is the only type that is even remotely portable. Anything else is not
  50  * portable, so do not use any other bitfield types.
  51  */
  52
  53 /*
  54  *  Values for description table header signatures
  55  */
  56 #define RSDP_NAME               "RSDP"
  57 #define RSDP_SIG                "RSD PTR "      /* RSDT Pointer signature */
  58 #define APIC_SIG                "APIC"  /* Multiple APIC Description Table */
  59 #define DSDT_SIG                "DSDT"  /* Differentiated System Description Table */
  60 #define FADT_SIG                "FACP"  /* Fixed ACPI Description Table */
  61 #define FACS_SIG                "FACS"  /* Firmware ACPI Control Structure */
  62 #define PSDT_SIG                "PSDT"  /* Persistent System Description Table */
  63 #define RSDT_SIG                "RSDT"  /* Root System Description Table */
  64 #define XSDT_SIG                "XSDT"  /* Extended  System Description Table */
  65 #define SSDT_SIG                "SSDT"  /* Secondary System Description Table */
  66 #define SBST_SIG                "SBST"  /* Smart Battery Specification Table */
  67 #define SPIC_SIG                "SPIC"  /* IOSAPIC table */
  68 #define BOOT_SIG                "BOOT"  /* Boot table */
  69
  70 #define GL_OWNED                0x02    /* Ownership of global lock is bit 1 */
  71
  72 /*
  73  * Common table types.  The base code can remain
  74  * constant if the underlying tables are changed
  75  */
  76 #define RSDT_DESCRIPTOR         struct rsdt_descriptor_rev2
  77 #define XSDT_DESCRIPTOR         struct xsdt_descriptor_rev2
  78 #define FACS_DESCRIPTOR         struct facs_descriptor_rev2
  79 #define FADT_DESCRIPTOR         struct fadt_descriptor_rev2
  80
  81 #pragma pack(1)
  82
  83 /*
  84  * ACPI Version-independent tables
  85  *
  86  * NOTE: The tables that are specific to ACPI versions (1.0, 2.0, etc.)
  87  * are in separate files.
  88  */
  89 struct rsdp_descriptor {        /* Root System Descriptor Pointer */
  90         char signature[8];      /* ACPI signature, contains "RSD PTR " */
  91         u8 checksum;            /* ACPI 1.0 checksum */
  92         char oem_id[6];         /* OEM identification */
  93         u8 revision;            /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
  94         u32 rsdt_physical_address;      /* 32-bit physical address of the RSDT */
  95         u32 length;             /* XSDT Length in bytes, including header */
  96         u64 xsdt_physical_address;      /* 64-bit physical address of the XSDT */
  97         u8 extended_checksum;   /* Checksum of entire table (ACPI 2.0) */
  98         char reserved[3];       /* Reserved, must be zero */
  99 };
 100
 101 struct acpi_common_facs {       /* Common FACS for internal use */
 102         u32 *global_lock;
 103         u64 *firmware_waking_vector;
 104         u8 vector_width;
 105 };
 106
 107 #define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
 108         char                            signature[4];           /* ASCII table signature */\
 109         u32                             length;                 /* Length of table in bytes, including this header */\
 110         u8                              revision;               /* ACPI Specification minor version # */\
 111         u8                              checksum;               /* To make sum of entire table == 0 */\
 112         char                            oem_id[6];              /* ASCII OEM identification */\
 113         char                            oem_table_id[8];        /* ASCII OEM table identification */\
 114         u32                             oem_revision;           /* OEM revision number */\
 115         char                            asl_compiler_id [4];    /* ASCII ASL compiler vendor ID */\
 116         u32                             asl_compiler_revision;  /* ASL compiler version */
 117
 118 struct acpi_table_header {      /* ACPI common table header */
 119 ACPI_TABLE_HEADER_DEF};
 120
 121 /*
 122  * MADT values and structures
 123  */
 124
 125 /* Values for MADT PCATCompat */
 126
 127 #define DUAL_PIC                0
 128 #define MULTIPLE_APIC           1
 129
 130 /* Master MADT */
 131
 132 struct multiple_apic_table {
 133         ACPI_TABLE_HEADER_DEF   /* ACPI common table header */
 134         u32 local_apic_address; /* Physical address of local APIC */
 135
 136         /* Flags (32 bits) */
 137
 138         u8 PCATcompat:1;        /* 00:    System also has dual 8259s */
 139          u8:7;                  /* 01-07: Reserved, must be zero */
 140         u8 reserved1[3];        /* 08-31: Reserved, must be zero */
 141 };
 142
 143 /* Values for Type in APIC_HEADER_DEF */
 144
 145 #define APIC_PROCESSOR          0
 146 #define APIC_IO                 1
 147 #define APIC_XRUPT_OVERRIDE     2
 148 #define APIC_NMI                3
 149 #define APIC_LOCAL_NMI          4
 150 #define APIC_ADDRESS_OVERRIDE   5
 151 #define APIC_IO_SAPIC           6
 152 #define APIC_LOCAL_SAPIC        7
 153 #define APIC_XRUPT_SOURCE       8
 154 #define APIC_RESERVED           9       /* 9 and greater are reserved */
 155
 156 /*
 157  * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
 158  */
 159 #define APIC_HEADER_DEF                     /* Common APIC sub-structure header */\
 160         u8                              type; \
 161         u8                              length;
 162
 163 struct apic_header {
 164 APIC_HEADER_DEF};
 165
 166 /* Values for MPS INTI flags */
 167
 168 #define POLARITY_CONFORMS       0
 169 #define POLARITY_ACTIVE_HIGH    1
 170 #define POLARITY_RESERVED       2
 171 #define POLARITY_ACTIVE_LOW     3
 172
 173 #define TRIGGER_CONFORMS        0
 174 #define TRIGGER_EDGE            1
 175 #define TRIGGER_RESERVED        2
 176 #define TRIGGER_LEVEL           3
 177
 178 /* Common flag definitions (16 bits each) */
 179
 180 #define MPS_INTI_FLAGS \
 181         u8                              polarity        : 2;    /* 00-01: Polarity of APIC I/O input signals */\
 182         u8                              trigger_mode    : 2;    /* 02-03: Trigger mode of APIC input signals */\
 183         u8                                              : 4;    /* 04-07: Reserved, must be zero */\
 184         u8                              reserved1;      /* 08-15: Reserved, must be zero */
 185
 186 #define LOCAL_APIC_FLAGS \
 187         u8                              processor_enabled: 1;   /* 00:    Processor is usable if set */\
 188         u8                                              : 7;    /* 01-07: Reserved, must be zero */\
 189         u8                              reserved2;      /* 08-15: Reserved, must be zero */
 190
 191 /* Sub-structures for MADT */
 192
 193 struct madt_processor_apic {
 194         APIC_HEADER_DEF u8 processor_id;        /* ACPI processor id */
 195         u8 local_apic_id;       /* Processor's local APIC id */
 196  LOCAL_APIC_FLAGS};
 197
 198 struct madt_io_apic {
 199         APIC_HEADER_DEF u8 io_apic_id;  /* I/O APIC ID */
 200         u8 reserved;            /* Reserved - must be zero */
 201         u32 address;            /* APIC physical address */
 202         u32 interrupt;          /* Global system interrupt where INTI
 203                                  * lines start */
 204 };
 205
 206 struct madt_interrupt_override {
 207         APIC_HEADER_DEF u8 bus; /* 0 - ISA */
 208         u8 source;              /* Interrupt source (IRQ) */
 209         u32 interrupt;          /* Global system interrupt */
 210  MPS_INTI_FLAGS};
 211
 212 struct madt_nmi_source {
 213         APIC_HEADER_DEF MPS_INTI_FLAGS u32 interrupt;   /* Global system interrupt */
 214 };
 215
 216 struct madt_local_apic_nmi {
 217         APIC_HEADER_DEF u8 processor_id;        /* ACPI processor id */
 218         MPS_INTI_FLAGS u8 lint; /* LINTn to which NMI is connected */
 219 };
 220
 221 struct madt_address_override {
 222         APIC_HEADER_DEF u16 reserved;   /* Reserved, must be zero */
 223         u64 address;            /* APIC physical address */
 224 };
 225
 226 struct madt_io_sapic {
 227         APIC_HEADER_DEF u8 io_sapic_id; /* I/O SAPIC ID */
 228         u8 reserved;            /* Reserved, must be zero */
 229         u32 interrupt_base;     /* Glocal interrupt for SAPIC start */
 230         u64 address;            /* SAPIC physical address */
 231 };
 232
 233 struct madt_local_sapic {
 234         APIC_HEADER_DEF u8 processor_id;        /* ACPI processor id */
 235         u8 local_sapic_id;      /* SAPIC ID */
 236         u8 local_sapic_eid;     /* SAPIC EID */
 237         u8 reserved[3];         /* Reserved, must be zero */
 238          LOCAL_APIC_FLAGS u32 processor_uID;    /* Numeric UID - ACPI 3.0 */
 239         char processor_uIDstring[1];    /* String UID  - ACPI 3.0 */
 240 };
 241
 242 struct madt_interrupt_source {
 243         APIC_HEADER_DEF MPS_INTI_FLAGS u8 interrupt_type;       /* 1=PMI, 2=INIT, 3=corrected */
 244         u8 processor_id;        /* Processor ID */
 245         u8 processor_eid;       /* Processor EID */
 246         u8 io_sapic_vector;     /* Vector value for PMI interrupts */
 247         u32 interrupt;          /* Global system interrupt */
 248         u32 flags;              /* Interrupt Source Flags */
 249 };
 250
 251 /*
 252  * Smart Battery
 253  */
 254 struct smart_battery_table {
 255         ACPI_TABLE_HEADER_DEF u32 warning_level;
 256         u32 low_level;
 257         u32 critical_level;
 258 };
 259
 260 #pragma pack()
 261
 262 /*
 263  * ACPI Table information.  We save the table address, length,
 264  * and type of memory allocation (mapped or allocated) for each
 265  * table for 1) when we exit, and 2) if a new table is installed
 266  */
 267 #define ACPI_MEM_NOT_ALLOCATED  0
 268 #define ACPI_MEM_ALLOCATED      1
 269 #define ACPI_MEM_MAPPED         2
 270
 271 /* Definitions for the Flags bitfield member of struct acpi_table_support */
 272
 273 #define ACPI_TABLE_SINGLE       0x00
 274 #define ACPI_TABLE_MULTIPLE     0x01
 275 #define ACPI_TABLE_EXECUTABLE   0x02
 276
 277 #define ACPI_TABLE_ROOT         0x00
 278 #define ACPI_TABLE_PRIMARY      0x10
 279 #define ACPI_TABLE_SECONDARY    0x20
 280 #define ACPI_TABLE_ALL          0x30
 281 #define ACPI_TABLE_TYPE_MASK    0x30
 282
 283 /* Data about each known table type */
 284
 285 struct acpi_table_support {
 286         char *name;
 287         char *signature;
 288         void **global_ptr;
 289         u8 sig_length;
 290         u8 flags;
 291 };
 292
 293 /*
 294  * Get the ACPI version-specific tables
 295  */
 296 #include "actbl1.h"             /* Acpi 1.0 table definitions */
 297 #include "actbl2.h"             /* Acpi 2.0 table definitions */
 298
 299 extern u8 acpi_fadt_is_v1;      /* is set to 1 if FADT is revision 1,
 300                                  * needed for certain workarounds */
 301
 302 #pragma pack(1)
 303 /*
 304  * High performance timer
 305  */
 306 struct hpet_table {
 307         ACPI_TABLE_HEADER_DEF u32 hardware_id;
 308         struct acpi_generic_address base_address;
 309         u8 hpet_number;
 310         u16 clock_tick;
 311         u8 attributes;
 312 };
 313
 314 #pragma pack()
 315
 316 #endif                          /* __ACTBL_H__ */