Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / usb / serial / ch341.c
1 /*
2 * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
3 * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
4 * Copyright 2009, Boris Hajduk <boris@hajduk.org>
5 *
6 * ch341.c implements a serial port driver for the Winchiphead CH341.
7 *
8 * The CH341 device can be used to implement an RS232 asynchronous
9 * serial port, an IEEE-1284 parallel printer port or a memory-like
10 * interface. In all cases the CH341 supports an I2C interface as well.
11 * This driver only supports the asynchronous serial interface.
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License version
15 * 2 as published by the Free Software Foundation.
16 */
17
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/tty.h>
21 #include <linux/module.h>
22 #include <linux/slab.h>
23 #include <linux/usb.h>
24 #include <linux/usb/serial.h>
25 #include <linux/serial.h>
26 #include <asm/unaligned.h>
27
28 #define DEFAULT_BAUD_RATE 9600
29 #define DEFAULT_TIMEOUT 1000
30
31 /* flags for IO-Bits */
32 #define CH341_BIT_RTS (1 << 6)
33 #define CH341_BIT_DTR (1 << 5)
34
35 /******************************/
36 /* interrupt pipe definitions */
37 /******************************/
38 /* always 4 interrupt bytes */
39 /* first irq byte normally 0x08 */
40 /* second irq byte base 0x7d + below */
41 /* third irq byte base 0x94 + below */
42 /* fourth irq byte normally 0xee */
43
44 /* second interrupt byte */
45 #define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
46
47 /* status returned in third interrupt answer byte, inverted in data
48 from irq */
49 #define CH341_BIT_CTS 0x01
50 #define CH341_BIT_DSR 0x02
51 #define CH341_BIT_RI 0x04
52 #define CH341_BIT_DCD 0x08
53 #define CH341_BITS_MODEM_STAT 0x0f /* all bits */
54
55 /*******************************/
56 /* baudrate calculation factor */
57 /*******************************/
58 #define CH341_BAUDBASE_FACTOR 1532620800
59 #define CH341_BAUDBASE_DIVMAX 3
60
61 /* Break support - the information used to implement this was gleaned from
62 * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato.
63 */
64
65 #define CH341_REQ_WRITE_REG 0x9A
66 #define CH341_REQ_READ_REG 0x95
67 #define CH341_REG_BREAK1 0x05
68 #define CH341_REG_BREAK2 0x18
69 #define CH341_NBREAK_BITS_REG1 0x01
70 #define CH341_NBREAK_BITS_REG2 0x40
71
72
73 static const struct usb_device_id id_table[] = {
74 { USB_DEVICE(0x4348, 0x5523) },
75 { USB_DEVICE(0x1a86, 0x7523) },
76 { USB_DEVICE(0x1a86, 0x5523) },
77 { },
78 };
79 MODULE_DEVICE_TABLE(usb, id_table);
80
81 struct ch341_private {
82 spinlock_t lock; /* access lock */
83 unsigned baud_rate; /* set baud rate */
84 u8 line_control; /* set line control value RTS/DTR */
85 u8 line_status; /* active status of modem control inputs */
86 u8 multi_status_change; /* status changed multiple since last call */
87 };
88
89 static int ch341_control_out(struct usb_device *dev, u8 request,
90 u16 value, u16 index)
91 {
92 int r;
93
94 dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n",
95 USB_DIR_OUT|0x40, (int)request, (int)value, (int)index);
96
97 r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
98 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
99 value, index, NULL, 0, DEFAULT_TIMEOUT);
100
101 return r;
102 }
103
104 static int ch341_control_in(struct usb_device *dev,
105 u8 request, u16 value, u16 index,
106 char *buf, unsigned bufsize)
107 {
108 int r;
109
110 dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n",
111 USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf,
112 (int)bufsize);
113
114 r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
115 USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
116 value, index, buf, bufsize, DEFAULT_TIMEOUT);
117 return r;
118 }
119
120 static int ch341_set_baudrate(struct usb_device *dev,
121 struct ch341_private *priv)
122 {
123 short a, b;
124 int r;
125 unsigned long factor;
126 short divisor;
127
128 if (!priv->baud_rate)
129 return -EINVAL;
130 factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
131 divisor = CH341_BAUDBASE_DIVMAX;
132
133 while ((factor > 0xfff0) && divisor) {
134 factor >>= 3;
135 divisor--;
136 }
137
138 if (factor > 0xfff0)
139 return -EINVAL;
140
141 factor = 0x10000 - factor;
142 a = (factor & 0xff00) | divisor;
143 b = factor & 0xff;
144
145 r = ch341_control_out(dev, 0x9a, 0x1312, a);
146 if (!r)
147 r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
148
149 return r;
150 }
151
152 static int ch341_set_handshake(struct usb_device *dev, u8 control)
153 {
154 return ch341_control_out(dev, 0xa4, ~control, 0);
155 }
156
157 static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
158 {
159 char *buffer;
160 int r;
161 const unsigned size = 8;
162 unsigned long flags;
163
164 buffer = kmalloc(size, GFP_KERNEL);
165 if (!buffer)
166 return -ENOMEM;
167
168 r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
169 if (r < 0)
170 goto out;
171
172 /* setup the private status if available */
173 if (r == 2) {
174 r = 0;
175 spin_lock_irqsave(&priv->lock, flags);
176 priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
177 priv->multi_status_change = 0;
178 spin_unlock_irqrestore(&priv->lock, flags);
179 } else
180 r = -EPROTO;
181
182 out: kfree(buffer);
183 return r;
184 }
185
186 /* -------------------------------------------------------------------------- */
187
188 static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
189 {
190 char *buffer;
191 int r;
192 const unsigned size = 8;
193
194 buffer = kmalloc(size, GFP_KERNEL);
195 if (!buffer)
196 return -ENOMEM;
197
198 /* expect two bytes 0x27 0x00 */
199 r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
200 if (r < 0)
201 goto out;
202
203 r = ch341_control_out(dev, 0xa1, 0, 0);
204 if (r < 0)
205 goto out;
206
207 r = ch341_set_baudrate(dev, priv);
208 if (r < 0)
209 goto out;
210
211 /* expect two bytes 0x56 0x00 */
212 r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
213 if (r < 0)
214 goto out;
215
216 r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
217 if (r < 0)
218 goto out;
219
220 /* expect 0xff 0xee */
221 r = ch341_get_status(dev, priv);
222 if (r < 0)
223 goto out;
224
225 r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
226 if (r < 0)
227 goto out;
228
229 r = ch341_set_baudrate(dev, priv);
230 if (r < 0)
231 goto out;
232
233 r = ch341_set_handshake(dev, priv->line_control);
234 if (r < 0)
235 goto out;
236
237 /* expect 0x9f 0xee */
238 r = ch341_get_status(dev, priv);
239
240 out: kfree(buffer);
241 return r;
242 }
243
244 static int ch341_port_probe(struct usb_serial_port *port)
245 {
246 struct ch341_private *priv;
247 int r;
248
249 priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
250 if (!priv)
251 return -ENOMEM;
252
253 spin_lock_init(&priv->lock);
254 priv->baud_rate = DEFAULT_BAUD_RATE;
255 priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
256
257 r = ch341_configure(port->serial->dev, priv);
258 if (r < 0)
259 goto error;
260
261 usb_set_serial_port_data(port, priv);
262 return 0;
263
264 error: kfree(priv);
265 return r;
266 }
267
268 static int ch341_port_remove(struct usb_serial_port *port)
269 {
270 struct ch341_private *priv;
271
272 priv = usb_get_serial_port_data(port);
273 kfree(priv);
274
275 return 0;
276 }
277
278 static int ch341_carrier_raised(struct usb_serial_port *port)
279 {
280 struct ch341_private *priv = usb_get_serial_port_data(port);
281 if (priv->line_status & CH341_BIT_DCD)
282 return 1;
283 return 0;
284 }
285
286 static void ch341_dtr_rts(struct usb_serial_port *port, int on)
287 {
288 struct ch341_private *priv = usb_get_serial_port_data(port);
289 unsigned long flags;
290
291 /* drop DTR and RTS */
292 spin_lock_irqsave(&priv->lock, flags);
293 if (on)
294 priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
295 else
296 priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
297 spin_unlock_irqrestore(&priv->lock, flags);
298 ch341_set_handshake(port->serial->dev, priv->line_control);
299 wake_up_interruptible(&port->delta_msr_wait);
300 }
301
302 static void ch341_close(struct usb_serial_port *port)
303 {
304 usb_serial_generic_close(port);
305 usb_kill_urb(port->interrupt_in_urb);
306 }
307
308
309 /* open this device, set default parameters */
310 static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
311 {
312 struct usb_serial *serial = port->serial;
313 struct ch341_private *priv = usb_get_serial_port_data(port);
314 int r;
315
316 priv->baud_rate = DEFAULT_BAUD_RATE;
317
318 r = ch341_configure(serial->dev, priv);
319 if (r)
320 goto out;
321
322 r = ch341_set_handshake(serial->dev, priv->line_control);
323 if (r)
324 goto out;
325
326 r = ch341_set_baudrate(serial->dev, priv);
327 if (r)
328 goto out;
329
330 dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__);
331 r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
332 if (r) {
333 dev_err(&port->dev, "%s - failed submitting interrupt urb,"
334 " error %d\n", __func__, r);
335 ch341_close(port);
336 goto out;
337 }
338
339 r = usb_serial_generic_open(tty, port);
340
341 out: return r;
342 }
343
344 /* Old_termios contains the original termios settings and
345 * tty->termios contains the new setting to be used.
346 */
347 static void ch341_set_termios(struct tty_struct *tty,
348 struct usb_serial_port *port, struct ktermios *old_termios)
349 {
350 struct ch341_private *priv = usb_get_serial_port_data(port);
351 unsigned baud_rate;
352 unsigned long flags;
353
354 baud_rate = tty_get_baud_rate(tty);
355
356 priv->baud_rate = baud_rate;
357
358 if (baud_rate) {
359 spin_lock_irqsave(&priv->lock, flags);
360 priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
361 spin_unlock_irqrestore(&priv->lock, flags);
362 ch341_set_baudrate(port->serial->dev, priv);
363 } else {
364 spin_lock_irqsave(&priv->lock, flags);
365 priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
366 spin_unlock_irqrestore(&priv->lock, flags);
367 }
368
369 ch341_set_handshake(port->serial->dev, priv->line_control);
370
371 /* Unimplemented:
372 * (cflag & CSIZE) : data bits [5, 8]
373 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
374 * (cflag & CSTOPB) : stop bits [1, 2]
375 */
376 }
377
378 static void ch341_break_ctl(struct tty_struct *tty, int break_state)
379 {
380 const uint16_t ch341_break_reg =
381 CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
382 struct usb_serial_port *port = tty->driver_data;
383 int r;
384 uint16_t reg_contents;
385 uint8_t *break_reg;
386
387 break_reg = kmalloc(2, GFP_KERNEL);
388 if (!break_reg) {
389 dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
390 return;
391 }
392
393 r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
394 ch341_break_reg, 0, break_reg, 2);
395 if (r < 0) {
396 dev_err(&port->dev, "%s - USB control read error (%d)\n",
397 __func__, r);
398 goto out;
399 }
400 dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n",
401 __func__, break_reg[0], break_reg[1]);
402 if (break_state != 0) {
403 dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
404 break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
405 break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
406 } else {
407 dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__);
408 break_reg[0] |= CH341_NBREAK_BITS_REG1;
409 break_reg[1] |= CH341_NBREAK_BITS_REG2;
410 }
411 dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
412 __func__, break_reg[0], break_reg[1]);
413 reg_contents = get_unaligned_le16(break_reg);
414 r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
415 ch341_break_reg, reg_contents);
416 if (r < 0)
417 dev_err(&port->dev, "%s - USB control write error (%d)\n",
418 __func__, r);
419 out:
420 kfree(break_reg);
421 }
422
423 static int ch341_tiocmset(struct tty_struct *tty,
424 unsigned int set, unsigned int clear)
425 {
426 struct usb_serial_port *port = tty->driver_data;
427 struct ch341_private *priv = usb_get_serial_port_data(port);
428 unsigned long flags;
429 u8 control;
430
431 spin_lock_irqsave(&priv->lock, flags);
432 if (set & TIOCM_RTS)
433 priv->line_control |= CH341_BIT_RTS;
434 if (set & TIOCM_DTR)
435 priv->line_control |= CH341_BIT_DTR;
436 if (clear & TIOCM_RTS)
437 priv->line_control &= ~CH341_BIT_RTS;
438 if (clear & TIOCM_DTR)
439 priv->line_control &= ~CH341_BIT_DTR;
440 control = priv->line_control;
441 spin_unlock_irqrestore(&priv->lock, flags);
442
443 return ch341_set_handshake(port->serial->dev, control);
444 }
445
446 static void ch341_read_int_callback(struct urb *urb)
447 {
448 struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
449 unsigned char *data = urb->transfer_buffer;
450 unsigned int actual_length = urb->actual_length;
451 int status;
452
453 switch (urb->status) {
454 case 0:
455 /* success */
456 break;
457 case -ECONNRESET:
458 case -ENOENT:
459 case -ESHUTDOWN:
460 /* this urb is terminated, clean up */
461 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
462 __func__, urb->status);
463 return;
464 default:
465 dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
466 __func__, urb->status);
467 goto exit;
468 }
469
470 usb_serial_debug_data(&port->dev, __func__,
471 urb->actual_length, urb->transfer_buffer);
472
473 if (actual_length >= 4) {
474 struct ch341_private *priv = usb_get_serial_port_data(port);
475 unsigned long flags;
476 u8 prev_line_status = priv->line_status;
477
478 spin_lock_irqsave(&priv->lock, flags);
479 priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
480 if ((data[1] & CH341_MULT_STAT))
481 priv->multi_status_change = 1;
482 spin_unlock_irqrestore(&priv->lock, flags);
483
484 if ((priv->line_status ^ prev_line_status) & CH341_BIT_DCD) {
485 struct tty_struct *tty = tty_port_tty_get(&port->port);
486 if (tty)
487 usb_serial_handle_dcd_change(port, tty,
488 priv->line_status & CH341_BIT_DCD);
489 tty_kref_put(tty);
490 }
491
492 wake_up_interruptible(&port->delta_msr_wait);
493 }
494
495 exit:
496 status = usb_submit_urb(urb, GFP_ATOMIC);
497 if (status)
498 dev_err(&urb->dev->dev,
499 "%s - usb_submit_urb failed with result %d\n",
500 __func__, status);
501 }
502
503 static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
504 {
505 struct ch341_private *priv = usb_get_serial_port_data(port);
506 unsigned long flags;
507 u8 prevstatus;
508 u8 status;
509 u8 changed;
510 u8 multi_change = 0;
511
512 spin_lock_irqsave(&priv->lock, flags);
513 prevstatus = priv->line_status;
514 priv->multi_status_change = 0;
515 spin_unlock_irqrestore(&priv->lock, flags);
516
517 while (!multi_change) {
518 interruptible_sleep_on(&port->delta_msr_wait);
519 /* see if a signal did it */
520 if (signal_pending(current))
521 return -ERESTARTSYS;
522
523 if (port->serial->disconnected)
524 return -EIO;
525
526 spin_lock_irqsave(&priv->lock, flags);
527 status = priv->line_status;
528 multi_change = priv->multi_status_change;
529 spin_unlock_irqrestore(&priv->lock, flags);
530
531 changed = prevstatus ^ status;
532
533 if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
534 ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
535 ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) ||
536 ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
537 return 0;
538 }
539 prevstatus = status;
540 }
541
542 return 0;
543 }
544
545 static int ch341_ioctl(struct tty_struct *tty,
546 unsigned int cmd, unsigned long arg)
547 {
548 struct usb_serial_port *port = tty->driver_data;
549
550 dev_dbg(&port->dev, "%s (%d) cmd = 0x%04x\n", __func__, port->number, cmd);
551
552 switch (cmd) {
553 case TIOCMIWAIT:
554 dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__, port->number);
555 return wait_modem_info(port, arg);
556
557 default:
558 dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
559 break;
560 }
561
562 return -ENOIOCTLCMD;
563 }
564
565 static int ch341_tiocmget(struct tty_struct *tty)
566 {
567 struct usb_serial_port *port = tty->driver_data;
568 struct ch341_private *priv = usb_get_serial_port_data(port);
569 unsigned long flags;
570 u8 mcr;
571 u8 status;
572 unsigned int result;
573
574 spin_lock_irqsave(&priv->lock, flags);
575 mcr = priv->line_control;
576 status = priv->line_status;
577 spin_unlock_irqrestore(&priv->lock, flags);
578
579 result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0)
580 | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0)
581 | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0)
582 | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0)
583 | ((status & CH341_BIT_RI) ? TIOCM_RI : 0)
584 | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0);
585
586 dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
587
588 return result;
589 }
590
591 static int ch341_reset_resume(struct usb_serial *serial)
592 {
593 struct ch341_private *priv;
594
595 priv = usb_get_serial_port_data(serial->port[0]);
596
597 /* reconfigure ch341 serial port after bus-reset */
598 ch341_configure(serial->dev, priv);
599
600 return 0;
601 }
602
603 static struct usb_serial_driver ch341_device = {
604 .driver = {
605 .owner = THIS_MODULE,
606 .name = "ch341-uart",
607 },
608 .id_table = id_table,
609 .num_ports = 1,
610 .open = ch341_open,
611 .dtr_rts = ch341_dtr_rts,
612 .carrier_raised = ch341_carrier_raised,
613 .close = ch341_close,
614 .ioctl = ch341_ioctl,
615 .set_termios = ch341_set_termios,
616 .break_ctl = ch341_break_ctl,
617 .tiocmget = ch341_tiocmget,
618 .tiocmset = ch341_tiocmset,
619 .read_int_callback = ch341_read_int_callback,
620 .port_probe = ch341_port_probe,
621 .port_remove = ch341_port_remove,
622 .reset_resume = ch341_reset_resume,
623 };
624
625 static struct usb_serial_driver * const serial_drivers[] = {
626 &ch341_device, NULL
627 };
628
629 module_usb_serial_driver(serial_drivers, id_table);
630
631 MODULE_LICENSE("GPL");