drivers/usb/serial/Kconfig

   1 #
   2 # USB Serial device configuration
   3 #
   4
   5 menu "USB Serial Converter support"
   6         depends on USB!=n
   7
   8 config USB_SERIAL
   9         tristate "USB Serial Converter support"
  10         depends on USB
  11         ---help---
  12           Say Y here if you have a USB device that provides normal serial
  13           ports, or acts like a serial device, and you want to connect it to
  14           your USB bus.
  15
  16           Please read <file:Documentation/usb/usb-serial.txt> for more
  17           information on the specifics of the different devices that are
  18           supported, and on how to use them.
  19
  20           To compile this driver as a module, choose M here: the
  21           module will be called usbserial.
  22
  23 config USB_SERIAL_CONSOLE
  24         bool "USB Serial Console device support (EXPERIMENTAL)"
  25         depends on USB_SERIAL=y && EXPERIMENTAL
  26         ---help---
  27           If you say Y here, it will be possible to use a USB to serial
  28           converter port as the system console (the system console is the
  29           device which receives all kernel messages and warnings and which
  30           allows logins in single user mode). This could be useful if some
  31           terminal or printer is connected to that serial port.
  32
  33           Even if you say Y here, the currently visible virtual console
  34           (/dev/tty0) will still be used as the system console by default, but
  35           you can alter that using a kernel command line option such as
  36           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  37           your boot loader (lilo or loadlin) about how to pass options to the
  38           kernel at boot time.)
  39
  40           If you don't have a VGA card installed and you say Y here, the
  41           kernel will automatically use the first USB to serial converter
  42           port, /dev/ttyUSB0, as system console.
  43
  44           If unsure, say N.
  45
  46 config USB_SERIAL_GENERIC
  47         bool "USB Generic Serial Driver"
  48         depends on USB_SERIAL
  49         help
  50           Say Y here if you want to use the generic USB serial driver.  Please
  51           read <file:Documentation/usb/usb-serial.txt> for more information on
  52           using this driver.  It is recommended that the "USB Serial converter
  53           support" be compiled as a module for this driver to be used
  54           properly.
  55
  56 config USB_SERIAL_AIRCABLE
  57         tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)"
  58         depends on USB_SERIAL && EXPERIMENTAL
  59         help
  60             Say Y here if you want to use AIRcable USB Bluetoot Dongle.
  61
  62             To compile this driver as a module, choose M here: the module
  63             will be called aircable.
  64
  65 config USB_SERIAL_AIRPRIME
  66         tristate "USB AirPrime CDMA Wireless Driver"
  67         depends on USB_SERIAL
  68         help
  69           Say Y here if you want to use a AirPrime CDMA Wireless PC card.
  70
  71           To compile this driver as a module, choose M here: the
  72           module will be called airprime.
  73
  74 config USB_SERIAL_ARK3116
  75         tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
  76         depends on USB_SERIAL && EXPERIMENTAL
  77         help
  78           Say Y here if you want to use a ARK Micro 3116 USB to Serial
  79           device.
  80
  81           To compile this driver as a module, choose M here: the
  82           module will be called ark3116
  83
  84 config USB_SERIAL_BELKIN
  85         tristate "USB Belkin and Peracom Single Port Serial Driver"
  86         depends on USB_SERIAL
  87         help
  88           Say Y here if you want to use a Belkin USB Serial single port
  89           adaptor (F5U103 is one of the model numbers) or the Peracom single
  90           port USB to serial adapter.
  91
  92           To compile this driver as a module, choose M here: the
  93           module will be called belkin_sa.
  94
  95 config USB_SERIAL_WHITEHEAT
  96         tristate "USB ConnectTech WhiteHEAT Serial Driver"
  97         depends on USB_SERIAL
  98         help
  99           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 100           USB to serial converter device.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called whiteheat.
 104
 105 config USB_SERIAL_DIGI_ACCELEPORT
 106         tristate "USB Digi International AccelePort USB Serial Driver"
 107         depends on USB_SERIAL
 108         ---help---
 109           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 110           2 port (plus parallel port) and 4 port USB serial converters.  The
 111           parallel port on the USB 2 appears as a third serial port on Linux.
 112           The Digi Acceleport USB 8 is not yet supported by this driver.
 113
 114           This driver works under SMP with the usb-uhci driver.  It does not
 115           work under SMP with the uhci driver.
 116
 117           To compile this driver as a module, choose M here: the
 118           module will be called digi_acceleport.
 119
 120 config USB_SERIAL_CP2101
 121         tristate "USB CP2101 UART Bridge Controller"
 122         depends on USB_SERIAL && EXPERIMENTAL
 123         help
 124           Say Y here if you want to use a CP2101/CP2102 based USB to RS232
 125           converter.
 126
 127           To compile this driver as a module, choose M here: the
 128           module will be called cp2101.
 129
 130 config USB_SERIAL_CYPRESS_M8
 131         tristate "USB Cypress M8 USB Serial Driver"
 132         depends on USB_SERIAL && EXPERIMENTAL
 133         help
 134           Say Y here if you want to use a device that contains the Cypress
 135           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 136
 137                 Attempted SMP support... send bug reports!
 138
 139           Supported microcontrollers in the CY4601 family are:
 140                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
 141
 142           To compile this driver as a module, choose M here: the
 143           module will be called cypress_m8.
 144
 145 config USB_SERIAL_EMPEG
 146         tristate "USB Empeg empeg-car Mark I/II Driver"
 147         depends on USB_SERIAL
 148         help
 149           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 150           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 151           device node.  See <file:Documentation/usb/usb-serial.txt> for more
 152           tidbits of information.
 153
 154           To compile this driver as a module, choose M here: the
 155           module will be called empeg.
 156
 157 config USB_SERIAL_FTDI_SIO
 158         tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
 159         depends on USB_SERIAL && EXPERIMENTAL
 160         ---help---
 161           Say Y here if you want to use a FTDI SIO single port USB to serial
 162           converter device. The implementation I have is called the USC-1000.
 163           This driver has also be tested with the 245 and 232 devices.
 164
 165           See <http://ftdi-usb-sio.sourceforge.net/> for more
 166           information on this driver and the device.
 167
 168           To compile this driver as a module, choose M here: the
 169           module will be called ftdi_sio.
 170
 171 config USB_SERIAL_FUNSOFT
 172         tristate "USB Fundamental Software Dongle Driver"
 173         depends on USB_SERIAL
 174         ---help---
 175           Say Y here if you want to use the Fundamental Software dongle.
 176
 177           To compile this driver as a module, choose M here: the
 178           module will be called funsoft.
 179
 180 config USB_SERIAL_VISOR
 181         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 182         depends on USB_SERIAL
 183         help
 184           Say Y here if you want to connect to your HandSpring Visor, Palm
 185           m500 or m505 through its USB docking station. See
 186           <http://usbvisor.sourceforge.net/> for more information on using this
 187           driver.
 188
 189           To compile this driver as a module, choose M here: the
 190           module will be called visor.
 191
 192 config USB_SERIAL_IPAQ
 193         tristate "USB PocketPC PDA Driver"
 194         depends on USB_SERIAL
 195         help
 196           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 197           or any other PDA running Windows CE 3.0 or PocketPC 2002
 198           using a USB cradle/cable. For information on using the driver,
 199           read <file:Documentation/usb/usb-serial.txt>.
 200
 201           To compile this driver as a module, choose M here: the
 202           module will be called ipaq.
 203
 204 config USB_SERIAL_IR
 205         tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
 206         depends on USB_SERIAL && EXPERIMENTAL
 207         help
 208           Say Y here if you want to enable simple serial support for USB IrDA
 209           devices.  This is useful if you do not want to use the full IrDA
 210           stack.
 211
 212           To compile this driver as a module, choose M here: the
 213           module will be called ir-usb.
 214
 215 config USB_SERIAL_EDGEPORT
 216         tristate "USB Inside Out Edgeport Serial Driver"
 217         depends on USB_SERIAL
 218         ---help---
 219           Say Y here if you want to use any of the following devices from
 220           Inside Out Networks (Digi):
 221           Edgeport/4
 222           Rapidport/4
 223           Edgeport/4t
 224           Edgeport/2
 225           Edgeport/4i
 226           Edgeport/2i
 227           Edgeport/421
 228           Edgeport/21
 229           Edgeport/8
 230           Edgeport/8 Dual
 231           Edgeport/2D8
 232           Edgeport/4D8
 233           Edgeport/8i
 234           Edgeport/2 DIN
 235           Edgeport/4 DIN
 236           Edgeport/16 Dual
 237
 238           To compile this driver as a module, choose M here: the
 239           module will be called io_edgeport.
 240
 241 config USB_SERIAL_EDGEPORT_TI
 242         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 243         depends on USB_SERIAL
 244         help
 245           Say Y here if you want to use any of the devices from Inside Out
 246           Networks (Digi) that are not supported by the io_edgeport driver.
 247           This includes the Edgeport/1 device.
 248
 249           To compile this driver as a module, choose M here: the
 250           module will be called io_ti.
 251
 252 config USB_SERIAL_GARMIN
 253        tristate "USB Garmin GPS driver"
 254        depends on USB_SERIAL
 255        help
 256          Say Y here if you want to connect to your Garmin GPS.
 257          Should work with most Garmin GPS devices which have a native USB port.
 258
 259          See <http://sourceforge.net/projects/garmin-gps> for the latest
 260          version of the driver.
 261
 262          To compile this driver as a module, choose M here: the
 263          module will be called garmin_gps.
 264
 265 config USB_SERIAL_IPW
 266         tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
 267         depends on USB_SERIAL && EXPERIMENTAL
 268         help
 269           Say Y here if you want to use a IPWireless USB modem such as
 270           the ones supplied by Axity3G/Sentech South Africa.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called ipw.
 274
 275 config USB_SERIAL_KEYSPAN_PDA
 276         tristate "USB Keyspan PDA Single Port Serial Driver"
 277         depends on USB_SERIAL
 278         help
 279           Say Y here if you want to use a Keyspan PDA single port USB to
 280           serial converter device.  This driver makes use of firmware
 281           developed from scratch by Brian Warner.
 282
 283           To compile this driver as a module, choose M here: the
 284           module will be called keyspan_pda.
 285
 286 config USB_SERIAL_KEYSPAN
 287         tristate "USB Keyspan USA-xxx Serial Driver"
 288         depends on USB_SERIAL
 289         ---help---
 290           Say Y here if you want to use Keyspan USB to serial converter
 291           devices.  This driver makes use of Keyspan's official firmware
 292           and was developed with their support.  You must also include
 293           firmware to support your particular device(s).
 294
 295           See <http://misc.nu/hugh/keyspan.html> for more information.
 296
 297           To compile this driver as a module, choose M here: the
 298           module will be called keyspan.
 299
 300 config USB_SERIAL_KEYSPAN_MPR
 301         bool "USB Keyspan MPR Firmware"
 302         depends on USB_SERIAL_KEYSPAN
 303         help
 304           Say Y here to include firmware for the Keyspan MPR converter.
 305
 306 config USB_SERIAL_KEYSPAN_USA28
 307         bool "USB Keyspan USA-28 Firmware"
 308         depends on USB_SERIAL_KEYSPAN
 309         help
 310           Say Y here to include firmware for the USA-28 converter.
 311
 312 config USB_SERIAL_KEYSPAN_USA28X
 313         bool "USB Keyspan USA-28X Firmware"
 314         depends on USB_SERIAL_KEYSPAN
 315         help
 316           Say Y here to include firmware for the USA-28X converter.
 317           Be sure you have a USA-28X, there are also 28XA and 28XB
 318           models, the label underneath has the actual part number.
 319
 320 config USB_SERIAL_KEYSPAN_USA28XA
 321         bool "USB Keyspan USA-28XA Firmware"
 322         depends on USB_SERIAL_KEYSPAN
 323         help
 324           Say Y here to include firmware for the USA-28XA converter.
 325           Be sure you have a USA-28XA, there are also 28X and 28XB
 326           models, the label underneath has the actual part number.
 327
 328 config USB_SERIAL_KEYSPAN_USA28XB
 329         bool "USB Keyspan USA-28XB Firmware"
 330         depends on USB_SERIAL_KEYSPAN
 331         help
 332           Say Y here to include firmware for the USA-28XB converter.
 333           Be sure you have a USA-28XB, there are also 28X and 28XA
 334           models, the label underneath has the actual part number.
 335
 336 config USB_SERIAL_KEYSPAN_USA19
 337         bool "USB Keyspan USA-19 Firmware"
 338         depends on USB_SERIAL_KEYSPAN
 339         help
 340           Say Y here to include firmware for the USA-19 converter.
 341
 342 config USB_SERIAL_KEYSPAN_USA18X
 343         bool "USB Keyspan USA-18X Firmware"
 344         depends on USB_SERIAL_KEYSPAN
 345         help
 346           Say Y here to include firmware for the USA-18X converter.
 347
 348 config USB_SERIAL_KEYSPAN_USA19W
 349         bool "USB Keyspan USA-19W Firmware"
 350         depends on USB_SERIAL_KEYSPAN
 351         help
 352           Say Y here to include firmware for the USA-19W converter.
 353
 354 config USB_SERIAL_KEYSPAN_USA19QW
 355         bool "USB Keyspan USA-19QW Firmware"
 356         depends on USB_SERIAL_KEYSPAN
 357         help
 358           Say Y here to include firmware for the USA-19QW converter.
 359
 360 config USB_SERIAL_KEYSPAN_USA19QI
 361         bool "USB Keyspan USA-19QI Firmware"
 362         depends on USB_SERIAL_KEYSPAN
 363         help
 364           Say Y here to include firmware for the USA-19QI converter.
 365
 366 config USB_SERIAL_KEYSPAN_USA49W
 367         bool "USB Keyspan USA-49W Firmware"
 368         depends on USB_SERIAL_KEYSPAN
 369         help
 370           Say Y here to include firmware for the USA-49W converter.
 371
 372 config USB_SERIAL_KEYSPAN_USA49WLC
 373         bool "USB Keyspan USA-49WLC Firmware"
 374         depends on USB_SERIAL_KEYSPAN
 375         help
 376           Say Y here to include firmware for the USA-49WLC converter.
 377
 378 config USB_SERIAL_KLSI
 379         tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
 380         depends on USB_SERIAL && EXPERIMENTAL
 381         ---help---
 382           Say Y here if you want to use a KL5KUSB105 - based single port
 383           serial adapter. The most widely known -- and currently the only
 384           tested -- device in this category is the PalmConnect USB Serial
 385           adapter sold by Palm Inc. for use with their Palm III and Palm V
 386           series PDAs.
 387
 388           Please read <file:Documentation/usb/usb-serial.txt> for more
 389           information.
 390
 391           To compile this driver as a module, choose M here: the
 392           module will be called kl5kusb105.
 393
 394 config USB_SERIAL_KOBIL_SCT
 395         tristate "USB KOBIL chipcard reader"
 396         depends on USB_SERIAL
 397         ---help---
 398           Say Y here if you want to use one of the following KOBIL USB chipcard
 399           readers:
 400
 401             - USB TWIN
 402             - KAAN Standard Plus
 403             - KAAN SIM
 404             - SecOVID Reader Plus
 405             - B1 Professional
 406             - KAAN Professional
 407
 408           Note that you need a current CT-API.
 409           To compile this driver as a module, choose M here: the
 410           module will be called kobil_sct.
 411
 412 config USB_SERIAL_MCT_U232
 413         tristate "USB MCT Single Port Serial Driver"
 414         depends on USB_SERIAL
 415         ---help---
 416           Say Y here if you want to use a USB Serial single port adapter from
 417           Magic Control Technology Corp. (U232 is one of the model numbers).
 418
 419           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 420           BAY, Belkin F5U109, and Belkin F5U409 devices.
 421
 422           To compile this driver as a module, choose M here: the
 423           module will be called mct_u232.
 424
 425 config USB_SERIAL_MOS7720
 426         tristate "USB Moschip 7720 Single Port Serial Driver"
 427         depends on USB_SERIAL
 428         ---help---
 429           Say Y here if you want to use a USB Serial single port adapter from
 430           Moschip Semiconductor Tech.
 431
 432           To compile this driver as a module, choose M here: the
 433           module will be called mos7720.
 434
 435 config USB_SERIAL_MOS7840
 436         tristate "USB Moschip 7840/7820 USB Serial Driver"
 437         depends on USB_SERIAL
 438         ---help---
 439           Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 440           Dual-Serial port device from MosChip Semiconductor.
 441
 442           The MCS7840 and MCS7820 have been developed to connect a wide range
 443           of standard serial devices to a USB host.  The MCS7840 has a USB
 444           device controller connected to four (4) individual UARTs while the
 445           MCS7820 controller connects to two (2) individual UARTs.
 446
 447           To compile this driver as a module, choose M here: the
 448           module will be called mos7840.  If unsure, choose N.
 449
 450 config USB_SERIAL_NAVMAN
 451         tristate "USB Navman GPS device"
 452         depends on USB_SERIAL
 453         help
 454           To compile this driver as a module, choose M here: the
 455           module will be called navman.
 456
 457 config USB_SERIAL_PL2303
 458         tristate "USB Prolific 2303 Single Port Serial Driver"
 459         depends on USB_SERIAL
 460         help
 461           Say Y here if you want to use the PL2303 USB Serial single port
 462           adapter from Prolific.
 463
 464           To compile this driver as a module, choose M here: the
 465           module will be called pl2303.
 466
 467 config USB_SERIAL_HP4X
 468         tristate "USB HP4x Calculators support"
 469         depends on USB_SERIAL
 470         help
 471           Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 472
 473           To compile this driver as a module, choose M here: the
 474           module will be called hp4x.
 475
 476 config USB_SERIAL_SAFE
 477         tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
 478         depends on USB_SERIAL && EXPERIMENTAL
 479
 480 config USB_SERIAL_SAFE_PADDED
 481         bool "USB Secure Encapsulated Driver - Padded"
 482         depends on USB_SERIAL_SAFE
 483
 484 config USB_SERIAL_SIERRAWIRELESS
 485         tristate "USB Sierra Wireless Driver"
 486         depends on USB_SERIAL
 487         help
 488           Say M here if you want to use a Sierra Wireless device (if
 489           using an PC 5220 or AC580 please use the Airprime driver
 490           instead).
 491
 492           To compile this driver as a module, choose M here: the
 493           module will be called sierra.
 494
 495 config USB_SERIAL_TI
 496         tristate "USB TI 3410/5052 Serial Driver"
 497         depends on USB_SERIAL
 498         help
 499           Say Y here if you want to use the TI USB 3410 or 5052
 500           serial devices.
 501
 502           To compile this driver as a module, choose M here: the
 503           module will be called ti_usb_3410_5052.
 504
 505 config USB_SERIAL_CYBERJACK
 506         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
 507         depends on USB_SERIAL && EXPERIMENTAL
 508         ---help---
 509           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 510           reader. This is an interface to ISO 7816 compatible contactbased
 511           chipcards, e.g. GSM SIMs.
 512
 513           To compile this driver as a module, choose M here: the
 514           module will be called cyberjack.
 515
 516           If unsure, say N.
 517
 518 config USB_SERIAL_XIRCOM
 519         tristate "USB Xircom / Entregra Single Port Serial Driver"
 520         depends on USB_SERIAL
 521         help
 522           Say Y here if you want to use a Xircom or Entregra single port USB to
 523           serial converter device.  This driver makes use of firmware
 524           developed from scratch by Brian Warner.
 525
 526           To compile this driver as a module, choose M here: the
 527           module will be called keyspan_pda.
 528
 529 config USB_SERIAL_OPTION
 530         tristate "USB driver for GSM and CDMA modems"
 531         depends on USB_SERIAL
 532         help
 533           Say Y here if you have a GSM or CDMA modem that's connected to USB.
 534
 535           This driver also supports several PCMCIA cards which have a
 536           built-in OHCI-USB adapter and an internally-connected GSM modem.
 537           The USB bus on these cards is not accessible externally.
 538
 539           Supported devices include (some of?) those made by:
 540           Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
 541
 542           To compile this driver as a module, choose M here: the
 543           module will be called option.
 544
 545           If this driver doesn't recognize your device,
 546           it might be accessible via the FTDI_SIO driver.
 547
 548 config USB_SERIAL_OMNINET
 549         tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 550         depends on USB_SERIAL && EXPERIMENTAL
 551         help
 552           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 553
 554           To compile this driver as a module, choose M here: the
 555           module will be called omninet.
 556
 557 config USB_EZUSB
 558         bool
 559         depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
 560         default y
 561
 562
 563 endmenu
 564