2 * Copyright (C) 2001-2004 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 /* this file is part of ehci-hcd.c */
21 /*-------------------------------------------------------------------------*/
24 * EHCI Root Hub ... the nonsharable stuff
26 * Registers don't need cpu_to_le32, that happens transparently
29 /*-------------------------------------------------------------------------*/
30 #include <linux/usb/otg.h>
32 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
36 static int ehci_hub_control(
45 /* After a power loss, ports that were owned by the companion must be
46 * reset so that the companion can still own them.
48 static void ehci_handover_companion_ports(struct ehci_hcd
*ehci
)
54 struct usb_hcd
*hcd
= ehci_to_hcd(ehci
);
56 if (!ehci
->owned_ports
)
59 /* Give the connections some time to appear */
62 port
= HCS_N_PORTS(ehci
->hcs_params
);
64 if (test_bit(port
, &ehci
->owned_ports
)) {
65 reg
= &ehci
->regs
->port_status
[port
];
66 status
= ehci_readl(ehci
, reg
) & ~PORT_RWC_BITS
;
68 /* Port already owned by companion? */
69 if (status
& PORT_OWNER
)
70 clear_bit(port
, &ehci
->owned_ports
);
71 else if (test_bit(port
, &ehci
->companion_ports
))
72 ehci_writel(ehci
, status
& ~PORT_PE
, reg
);
74 ehci_hub_control(hcd
, SetPortFeature
,
75 USB_PORT_FEAT_RESET
, port
+ 1,
80 if (!ehci
->owned_ports
)
82 msleep(90); /* Wait for resets to complete */
84 port
= HCS_N_PORTS(ehci
->hcs_params
);
86 if (test_bit(port
, &ehci
->owned_ports
)) {
87 ehci_hub_control(hcd
, GetPortStatus
,
89 (char *) &buf
, sizeof(buf
));
91 /* The companion should now own the port,
92 * but if something went wrong the port must not
95 reg
= &ehci
->regs
->port_status
[port
];
96 status
= ehci_readl(ehci
, reg
) & ~PORT_RWC_BITS
;
97 if (status
& PORT_OWNER
)
98 ehci_writel(ehci
, status
| PORT_CSC
, reg
);
100 ehci_dbg(ehci
, "failed handover port %d: %x\n",
102 ehci_writel(ehci
, status
& ~PORT_PE
, reg
);
107 ehci
->owned_ports
= 0;
110 static int __maybe_unused
ehci_port_change(struct ehci_hcd
*ehci
)
112 int i
= HCS_N_PORTS(ehci
->hcs_params
);
114 /* First check if the controller indicates a change event */
116 if (ehci_readl(ehci
, &ehci
->regs
->status
) & STS_PCD
)
120 * Not all controllers appear to update this while going from D3 to D0,
121 * so check the individual port status registers as well
125 if (ehci_readl(ehci
, &ehci
->regs
->port_status
[i
]) & PORT_CSC
)
131 static __maybe_unused
void ehci_adjust_port_wakeup_flags(struct ehci_hcd
*ehci
,
132 bool suspending
, bool do_wakeup
)
138 /* If remote wakeup is enabled for the root hub but disabled
139 * for the controller, we must adjust all the port wakeup flags
140 * when the controller is suspended or resumed. In all other
141 * cases they don't need to be changed.
143 if (!ehci_to_hcd(ehci
)->self
.root_hub
->do_remote_wakeup
|| do_wakeup
)
146 spin_lock_irqsave(&ehci
->lock
, flags
);
148 /* clear phy low-power mode before changing wakeup flags */
149 if (ehci
->has_hostpc
) {
150 port
= HCS_N_PORTS(ehci
->hcs_params
);
152 u32 __iomem
*hostpc_reg
;
154 hostpc_reg
= (u32 __iomem
*)((u8
*) ehci
->regs
155 + HOSTPC0
+ 4 * port
);
156 temp
= ehci_readl(ehci
, hostpc_reg
);
157 ehci_writel(ehci
, temp
& ~HOSTPC_PHCD
, hostpc_reg
);
159 spin_unlock_irqrestore(&ehci
->lock
, flags
);
161 spin_lock_irqsave(&ehci
->lock
, flags
);
164 port
= HCS_N_PORTS(ehci
->hcs_params
);
166 u32 __iomem
*reg
= &ehci
->regs
->port_status
[port
];
167 u32 t1
= ehci_readl(ehci
, reg
) & ~PORT_RWC_BITS
;
168 u32 t2
= t1
& ~PORT_WAKE_BITS
;
170 /* If we are suspending the controller, clear the flags.
171 * If we are resuming the controller, set the wakeup flags.
174 if (t1
& PORT_CONNECT
)
175 t2
|= PORT_WKOC_E
| PORT_WKDISC_E
;
177 t2
|= PORT_WKOC_E
| PORT_WKCONN_E
;
179 ehci_vdbg(ehci
, "port %d, %08x -> %08x\n",
181 ehci_writel(ehci
, t2
, reg
);
184 /* enter phy low-power mode again */
185 if (ehci
->has_hostpc
) {
186 port
= HCS_N_PORTS(ehci
->hcs_params
);
188 u32 __iomem
*hostpc_reg
;
190 hostpc_reg
= (u32 __iomem
*)((u8
*) ehci
->regs
191 + HOSTPC0
+ 4 * port
);
192 temp
= ehci_readl(ehci
, hostpc_reg
);
193 ehci_writel(ehci
, temp
| HOSTPC_PHCD
, hostpc_reg
);
197 /* Does the root hub have a port wakeup pending? */
198 if (!suspending
&& ehci_port_change(ehci
))
199 usb_hcd_resume_root_hub(ehci_to_hcd(ehci
));
201 spin_unlock_irqrestore(&ehci
->lock
, flags
);
204 static int ehci_bus_suspend (struct usb_hcd
*hcd
)
206 struct ehci_hcd
*ehci
= hcd_to_ehci (hcd
);
211 ehci_dbg(ehci
, "suspend root hub\n");
213 if (time_before (jiffies
, ehci
->next_statechange
))
215 del_timer_sync(&ehci
->watchdog
);
216 del_timer_sync(&ehci
->iaa_watchdog
);
218 spin_lock_irq (&ehci
->lock
);
220 /* Once the controller is stopped, port resumes that are already
221 * in progress won't complete. Hence if remote wakeup is enabled
222 * for the root hub and any ports are in the middle of a resume or
223 * remote wakeup, we must fail the suspend.
225 if (hcd
->self
.root_hub
->do_remote_wakeup
) {
226 if (ehci
->resuming_ports
) {
227 spin_unlock_irq(&ehci
->lock
);
228 ehci_dbg(ehci
, "suspend failed because a port is resuming\n");
233 /* stop schedules, clean any completed work */
234 if (ehci
->rh_state
== EHCI_RH_RUNNING
)
236 ehci
->command
= ehci_readl(ehci
, &ehci
->regs
->command
);
239 /* Unlike other USB host controller types, EHCI doesn't have
240 * any notion of "global" or bus-wide suspend. The driver has
241 * to manually suspend all the active unsuspended ports, and
242 * then manually resume them in the bus_resume() routine.
244 ehci
->bus_suspended
= 0;
245 ehci
->owned_ports
= 0;
247 port
= HCS_N_PORTS(ehci
->hcs_params
);
249 u32 __iomem
*reg
= &ehci
->regs
->port_status
[port
];
250 u32 t1
= ehci_readl(ehci
, reg
) & ~PORT_RWC_BITS
;
251 u32 t2
= t1
& ~PORT_WAKE_BITS
;
253 /* keep track of which ports we suspend */
255 set_bit(port
, &ehci
->owned_ports
);
256 else if ((t1
& PORT_PE
) && !(t1
& PORT_SUSPEND
)) {
258 set_bit(port
, &ehci
->bus_suspended
);
261 /* enable remote wakeup on all ports, if told to do so */
262 if (hcd
->self
.root_hub
->do_remote_wakeup
) {
263 /* only enable appropriate wake bits, otherwise the
264 * hardware can not go phy low power mode. If a race
265 * condition happens here(connection change during bits
266 * set), the port change detection will finally fix it.
268 if (t1
& PORT_CONNECT
)
269 t2
|= PORT_WKOC_E
| PORT_WKDISC_E
;
271 t2
|= PORT_WKOC_E
| PORT_WKCONN_E
;
275 ehci_vdbg (ehci
, "port %d, %08x -> %08x\n",
277 ehci_writel(ehci
, t2
, reg
);
282 if (changed
&& ehci
->has_hostpc
) {
283 spin_unlock_irq(&ehci
->lock
);
284 msleep(5); /* 5 ms for HCD to enter low-power mode */
285 spin_lock_irq(&ehci
->lock
);
287 port
= HCS_N_PORTS(ehci
->hcs_params
);
289 u32 __iomem
*hostpc_reg
;
292 hostpc_reg
= (u32 __iomem
*)((u8
*) ehci
->regs
293 + HOSTPC0
+ 4 * port
);
294 t3
= ehci_readl(ehci
, hostpc_reg
);
295 ehci_writel(ehci
, t3
| HOSTPC_PHCD
, hostpc_reg
);
296 t3
= ehci_readl(ehci
, hostpc_reg
);
297 ehci_dbg(ehci
, "Port %d phy low-power mode %s\n",
298 port
, (t3
& HOSTPC_PHCD
) ?
299 "succeeded" : "failed");
303 /* Apparently some devices need a >= 1-uframe delay here */
304 if (ehci
->bus_suspended
)
307 /* turn off now-idle HC */
309 ehci
->rh_state
= EHCI_RH_SUSPENDED
;
312 end_unlink_async(ehci
);
314 /* allow remote wakeup */
316 if (!hcd
->self
.root_hub
->do_remote_wakeup
)
318 ehci_writel(ehci
, mask
, &ehci
->regs
->intr_enable
);
319 ehci_readl(ehci
, &ehci
->regs
->intr_enable
);
321 ehci
->next_statechange
= jiffies
+ msecs_to_jiffies(10);
322 spin_unlock_irq (&ehci
->lock
);
324 /* ehci_work() may have re-enabled the watchdog timer, which we do not
325 * want, and so we must delete any pending watchdog timer events.
327 del_timer_sync(&ehci
->watchdog
);
332 /* caller has locked the root hub, and should reset/reinit on error */
333 static int ehci_bus_resume (struct usb_hcd
*hcd
)
335 struct ehci_hcd
*ehci
= hcd_to_ehci (hcd
);
339 unsigned long resume_needed
= 0;
341 if (time_before (jiffies
, ehci
->next_statechange
))
343 spin_lock_irq (&ehci
->lock
);
344 if (!HCD_HW_ACCESSIBLE(hcd
)) {
345 spin_unlock_irq(&ehci
->lock
);
349 if (unlikely(ehci
->debug
)) {
350 if (!dbgp_reset_prep())
353 dbgp_external_startup();
356 /* Ideally and we've got a real resume here, and no port's power
357 * was lost. (For PCI, that means Vaux was maintained.) But we
358 * could instead be restoring a swsusp snapshot -- so that BIOS was
359 * the last user of the controller, not reset/pm hardware keeping
360 * state we gave to it.
362 power_okay
= ehci_readl(ehci
, &ehci
->regs
->intr_enable
);
363 ehci_dbg(ehci
, "resume root hub%s\n",
364 power_okay
? "" : " after power loss");
366 /* at least some APM implementations will try to deliver
367 * IRQs right away, so delay them until we're ready.
369 ehci_writel(ehci
, 0, &ehci
->regs
->intr_enable
);
371 /* re-init operational registers */
372 ehci_writel(ehci
, 0, &ehci
->regs
->segment
);
373 ehci_writel(ehci
, ehci
->periodic_dma
, &ehci
->regs
->frame_list
);
374 ehci_writel(ehci
, (u32
) ehci
->async
->qh_dma
, &ehci
->regs
->async_next
);
376 /* restore CMD_RUN, framelist size, and irq threshold */
377 ehci_writel(ehci
, ehci
->command
, &ehci
->regs
->command
);
378 ehci
->rh_state
= EHCI_RH_RUNNING
;
380 /* Some controller/firmware combinations need a delay during which
381 * they set up the port statuses. See Bugzilla #8190. */
382 spin_unlock_irq(&ehci
->lock
);
384 spin_lock_irq(&ehci
->lock
);
386 /* clear phy low-power mode before resume */
387 if (ehci
->bus_suspended
&& ehci
->has_hostpc
) {
388 i
= HCS_N_PORTS(ehci
->hcs_params
);
390 if (test_bit(i
, &ehci
->bus_suspended
)) {
391 u32 __iomem
*hostpc_reg
;
393 hostpc_reg
= (u32 __iomem
*)((u8
*) ehci
->regs
395 temp
= ehci_readl(ehci
, hostpc_reg
);
396 ehci_writel(ehci
, temp
& ~HOSTPC_PHCD
,
400 spin_unlock_irq(&ehci
->lock
);
402 spin_lock_irq(&ehci
->lock
);
405 /* manually resume the ports we suspended during bus_suspend() */
406 i
= HCS_N_PORTS (ehci
->hcs_params
);
408 temp
= ehci_readl(ehci
, &ehci
->regs
->port_status
[i
]);
409 temp
&= ~(PORT_RWC_BITS
| PORT_WAKE_BITS
);
410 if (test_bit(i
, &ehci
->bus_suspended
) &&
411 (temp
& PORT_SUSPEND
)) {
413 set_bit(i
, &resume_needed
);
415 ehci_writel(ehci
, temp
, &ehci
->regs
->port_status
[i
]);
418 /* msleep for 20ms only if code is trying to resume port */
420 spin_unlock_irq(&ehci
->lock
);
422 spin_lock_irq(&ehci
->lock
);
425 i
= HCS_N_PORTS (ehci
->hcs_params
);
427 temp
= ehci_readl(ehci
, &ehci
->regs
->port_status
[i
]);
428 if (test_bit(i
, &resume_needed
)) {
429 temp
&= ~(PORT_RWC_BITS
| PORT_RESUME
);
430 ehci_writel(ehci
, temp
, &ehci
->regs
->port_status
[i
]);
431 ehci_vdbg (ehci
, "resumed port %d\n", i
+ 1);
434 (void) ehci_readl(ehci
, &ehci
->regs
->command
);
436 /* maybe re-activate the schedule(s) */
438 if (ehci
->async
->qh_next
.qh
)
440 if (ehci
->periodic_sched
)
443 ehci
->command
|= temp
;
444 ehci_writel(ehci
, ehci
->command
, &ehci
->regs
->command
);
447 ehci
->next_statechange
= jiffies
+ msecs_to_jiffies(5);
449 /* Now we can safely re-enable irqs */
450 ehci_writel(ehci
, INTR_MASK
, &ehci
->regs
->intr_enable
);
452 spin_unlock_irq (&ehci
->lock
);
453 ehci_handover_companion_ports(ehci
);
459 #define ehci_bus_suspend NULL
460 #define ehci_bus_resume NULL
462 #endif /* CONFIG_PM */
464 /*-------------------------------------------------------------------------*/
467 * Sets the owner of a port
469 static void set_owner(struct ehci_hcd
*ehci
, int portnum
, int new_owner
)
471 u32 __iomem
*status_reg
;
475 status_reg
= &ehci
->regs
->port_status
[portnum
];
478 * The controller won't set the OWNER bit if the port is
479 * enabled, so this loop will sometimes require at least two
480 * iterations: one to disable the port and one to set OWNER.
482 for (try = 4; try > 0; --try) {
483 spin_lock_irq(&ehci
->lock
);
484 port_status
= ehci_readl(ehci
, status_reg
);
485 if ((port_status
& PORT_OWNER
) == new_owner
486 || (port_status
& (PORT_OWNER
| PORT_CONNECT
))
490 port_status
^= PORT_OWNER
;
491 port_status
&= ~(PORT_PE
| PORT_RWC_BITS
);
492 ehci_writel(ehci
, port_status
, status_reg
);
494 spin_unlock_irq(&ehci
->lock
);
500 /*-------------------------------------------------------------------------*/
502 static int check_reset_complete (
503 struct ehci_hcd
*ehci
,
505 u32 __iomem
*status_reg
,
508 if (!(port_status
& PORT_CONNECT
))
511 /* if reset finished and it's still not enabled -- handoff */
512 if (!(port_status
& PORT_PE
)) {
514 /* with integrated TT, there's nobody to hand it to! */
515 if (ehci_is_TDI(ehci
)) {
517 "Failed to enable port %d on root hub TT\n",
522 ehci_dbg (ehci
, "port %d full speed --> companion\n",
525 // what happens if HCS_N_CC(params) == 0 ?
526 port_status
|= PORT_OWNER
;
527 port_status
&= ~PORT_RWC_BITS
;
528 ehci_writel(ehci
, port_status
, status_reg
);
530 /* ensure 440EPX ohci controller state is operational */
531 if (ehci
->has_amcc_usb23
)
532 set_ohci_hcfs(ehci
, 1);
534 ehci_dbg (ehci
, "port %d high speed\n", index
+ 1);
535 /* ensure 440EPx ohci controller state is suspended */
536 if (ehci
->has_amcc_usb23
)
537 set_ohci_hcfs(ehci
, 0);
543 /*-------------------------------------------------------------------------*/
546 /* build "status change" packet (one or two bytes) from HC registers */
549 ehci_hub_status_data (struct usb_hcd
*hcd
, char *buf
)
551 struct ehci_hcd
*ehci
= hcd_to_ehci (hcd
);
554 int ports
, i
, retval
= 1;
558 /* init status to no-changes */
560 ports
= HCS_N_PORTS (ehci
->hcs_params
);
566 /* Inform the core about resumes-in-progress by returning
567 * a non-zero value even if there are no status changes.
569 status
= ehci
->resuming_ports
;
571 /* Some boards (mostly VIA?) report bogus overcurrent indications,
572 * causing massive log spam unless we completely ignore them. It
573 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
574 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
575 * PORT_POWER; that's surprising, but maybe within-spec.
578 mask
= PORT_CSC
| PORT_PEC
| PORT_OCC
;
580 mask
= PORT_CSC
| PORT_PEC
;
581 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
583 /* no hub change reports (bit 0) for now (power, ...) */
585 /* port N changes (bit N)? */
586 spin_lock_irqsave (&ehci
->lock
, flags
);
588 /* get per-port change detect bits */
590 ppcd
= ehci_readl(ehci
, &ehci
->regs
->status
) >> 16;
592 for (i
= 0; i
< ports
; i
++) {
593 /* leverage per-port change bits feature */
594 if (ehci
->has_ppcd
&& !(ppcd
& (1 << i
)))
596 temp
= ehci_readl(ehci
, &ehci
->regs
->port_status
[i
]);
599 * Return status information even for ports with OWNER set.
600 * Otherwise khubd wouldn't see the disconnect event when a
601 * high-speed device is switched over to the companion
602 * controller by the user.
605 if ((temp
& mask
) != 0 || test_bit(i
, &ehci
->port_c_suspend
)
606 || (ehci
->reset_done
[i
] && time_after_eq(
607 jiffies
, ehci
->reset_done
[i
]))) {
609 buf
[0] |= 1 << (i
+ 1);
611 buf
[1] |= 1 << (i
- 7);
615 /* FIXME autosuspend idle root hubs */
616 spin_unlock_irqrestore (&ehci
->lock
, flags
);
617 return status
? retval
: 0;
620 /*-------------------------------------------------------------------------*/
623 ehci_hub_descriptor (
624 struct ehci_hcd
*ehci
,
625 struct usb_hub_descriptor
*desc
627 int ports
= HCS_N_PORTS (ehci
->hcs_params
);
630 desc
->bDescriptorType
= 0x29;
631 desc
->bPwrOn2PwrGood
= 10; /* ehci 1.0, 2.3.9 says 20ms max */
632 desc
->bHubContrCurrent
= 0;
634 desc
->bNbrPorts
= ports
;
635 temp
= 1 + (ports
/ 8);
636 desc
->bDescLength
= 7 + 2 * temp
;
638 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
639 memset(&desc
->u
.hs
.DeviceRemovable
[0], 0, temp
);
640 memset(&desc
->u
.hs
.DeviceRemovable
[temp
], 0xff, temp
);
642 temp
= 0x0008; /* per-port overcurrent reporting */
643 if (HCS_PPC (ehci
->hcs_params
))
644 temp
|= 0x0001; /* per-port power control */
646 temp
|= 0x0002; /* no power switching */
648 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
649 if (HCS_INDICATOR (ehci
->hcs_params
))
650 temp
|= 0x0080; /* per-port indicators (LEDs) */
652 desc
->wHubCharacteristics
= cpu_to_le16(temp
);
655 /*-------------------------------------------------------------------------*/
657 static int ehci_hub_control (
665 struct ehci_hcd
*ehci
= hcd_to_ehci (hcd
);
666 int ports
= HCS_N_PORTS (ehci
->hcs_params
);
667 u32 __iomem
*status_reg
= &ehci
->regs
->port_status
[
668 (wIndex
& 0xff) - 1];
669 u32 __iomem
*hostpc_reg
= NULL
;
670 u32 temp
, temp1
, status
;
676 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
677 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
678 * (track current state ourselves) ... blink for diagnostics,
679 * power, "this is the one", etc. EHCI spec supports this.
682 if (ehci
->has_hostpc
)
683 hostpc_reg
= (u32 __iomem
*)((u8
*)ehci
->regs
684 + HOSTPC0
+ 4 * ((wIndex
& 0xff) - 1));
685 spin_lock_irqsave (&ehci
->lock
, flags
);
687 case ClearHubFeature
:
689 case C_HUB_LOCAL_POWER
:
690 case C_HUB_OVER_CURRENT
:
691 /* no hub-wide feature/status flags */
697 case ClearPortFeature
:
698 if (!wIndex
|| wIndex
> ports
)
701 temp
= ehci_readl(ehci
, status_reg
);
704 * Even if OWNER is set, so the port is owned by the
705 * companion controller, khubd needs to be able to clear
706 * the port-change status bits (especially
707 * USB_PORT_STAT_C_CONNECTION).
711 case USB_PORT_FEAT_ENABLE
:
712 ehci_writel(ehci
, temp
& ~PORT_PE
, status_reg
);
714 case USB_PORT_FEAT_C_ENABLE
:
715 ehci_writel(ehci
, (temp
& ~PORT_RWC_BITS
) | PORT_PEC
,
718 case USB_PORT_FEAT_SUSPEND
:
719 if (temp
& PORT_RESET
)
721 if (ehci
->no_selective_suspend
)
723 #ifdef CONFIG_USB_OTG
724 if ((hcd
->self
.otg_port
== (wIndex
+ 1))
725 && hcd
->self
.b_hnp_enable
) {
726 otg_start_hnp(ehci
->transceiver
->otg
);
730 if (!(temp
& PORT_SUSPEND
))
732 if ((temp
& PORT_PE
) == 0)
735 /* clear phy low-power mode before resume */
737 temp1
= ehci_readl(ehci
, hostpc_reg
);
738 ehci_writel(ehci
, temp1
& ~HOSTPC_PHCD
,
740 spin_unlock_irqrestore(&ehci
->lock
, flags
);
741 msleep(5);/* wait to leave low-power mode */
742 spin_lock_irqsave(&ehci
->lock
, flags
);
744 /* resume signaling for 20 msec */
745 temp
&= ~(PORT_RWC_BITS
| PORT_WAKE_BITS
);
746 ehci_writel(ehci
, temp
| PORT_RESUME
, status_reg
);
747 ehci
->reset_done
[wIndex
] = jiffies
748 + msecs_to_jiffies(20);
750 case USB_PORT_FEAT_C_SUSPEND
:
751 clear_bit(wIndex
, &ehci
->port_c_suspend
);
753 case USB_PORT_FEAT_POWER
:
754 if (HCS_PPC (ehci
->hcs_params
))
756 temp
& ~(PORT_RWC_BITS
| PORT_POWER
),
759 case USB_PORT_FEAT_C_CONNECTION
:
761 /* clear PORTSC bits on disconnect */
763 temp
&= ~PORT_DEV_ADDR
;
765 ehci_writel(ehci
, (temp
& ~PORT_RWC_BITS
) | PORT_CSC
,
768 case USB_PORT_FEAT_C_OVER_CURRENT
:
769 ehci_writel(ehci
, (temp
& ~PORT_RWC_BITS
) | PORT_OCC
,
772 case USB_PORT_FEAT_C_RESET
:
773 /* GetPortStatus clears reset */
778 ehci_readl(ehci
, &ehci
->regs
->command
); /* unblock posted write */
780 case GetHubDescriptor
:
781 ehci_hub_descriptor (ehci
, (struct usb_hub_descriptor
*)
785 /* no hub-wide feature/status flags */
787 //cpu_to_le32s ((u32 *) buf);
790 if (!wIndex
|| wIndex
> ports
)
794 temp
= ehci_readl(ehci
, status_reg
);
798 status
|= USB_PORT_STAT_C_CONNECTION
<< 16;
800 status
|= USB_PORT_STAT_C_ENABLE
<< 16;
802 if ((temp
& PORT_OCC
) && !ignore_oc
){
803 status
|= USB_PORT_STAT_C_OVERCURRENT
<< 16;
806 * Hubs should disable port power on over-current.
807 * However, not all EHCI implementations do this
808 * automatically, even if they _do_ support per-port
809 * power switching; they're allowed to just limit the
810 * current. khubd will turn the power back on.
812 if ((temp
& PORT_OC
) && HCS_PPC(ehci
->hcs_params
)) {
814 temp
& ~(PORT_RWC_BITS
| PORT_POWER
),
816 temp
= ehci_readl(ehci
, status_reg
);
820 /* whoever resumes must GetPortStatus to complete it!! */
821 if (temp
& PORT_RESUME
) {
823 /* Remote Wakeup received? */
824 if (!ehci
->reset_done
[wIndex
]) {
825 /* resume signaling for 20 msec */
826 ehci
->reset_done
[wIndex
] = jiffies
827 + msecs_to_jiffies(20);
828 /* check the port again */
829 mod_timer(&ehci_to_hcd(ehci
)->rh_timer
,
830 ehci
->reset_done
[wIndex
]);
833 /* resume completed? */
834 else if (time_after_eq(jiffies
,
835 ehci
->reset_done
[wIndex
])) {
836 clear_bit(wIndex
, &ehci
->suspended_ports
);
837 set_bit(wIndex
, &ehci
->port_c_suspend
);
838 ehci
->reset_done
[wIndex
] = 0;
840 /* stop resume signaling */
841 temp
= ehci_readl(ehci
, status_reg
);
843 temp
& ~(PORT_RWC_BITS
| PORT_RESUME
),
845 clear_bit(wIndex
, &ehci
->resuming_ports
);
846 retval
= handshake(ehci
, status_reg
,
847 PORT_RESUME
, 0, 2000 /* 2msec */);
850 "port %d resume error %d\n",
854 temp
&= ~(PORT_SUSPEND
|PORT_RESUME
|(3<<10));
858 /* whoever resets must GetPortStatus to complete it!! */
859 if ((temp
& PORT_RESET
)
860 && time_after_eq(jiffies
,
861 ehci
->reset_done
[wIndex
])) {
862 status
|= USB_PORT_STAT_C_RESET
<< 16;
863 ehci
->reset_done
[wIndex
] = 0;
864 clear_bit(wIndex
, &ehci
->resuming_ports
);
866 /* force reset to complete */
867 ehci_writel(ehci
, temp
& ~(PORT_RWC_BITS
| PORT_RESET
),
869 /* REVISIT: some hardware needs 550+ usec to clear
870 * this bit; seems too long to spin routinely...
872 retval
= handshake(ehci
, status_reg
,
873 PORT_RESET
, 0, 1000);
875 ehci_err (ehci
, "port %d reset error %d\n",
880 /* see what we found out */
881 temp
= check_reset_complete (ehci
, wIndex
, status_reg
,
882 ehci_readl(ehci
, status_reg
));
885 if (!(temp
& (PORT_RESUME
|PORT_RESET
))) {
886 ehci
->reset_done
[wIndex
] = 0;
887 clear_bit(wIndex
, &ehci
->resuming_ports
);
890 /* transfer dedicated ports to the companion hc */
891 if ((temp
& PORT_CONNECT
) &&
892 test_bit(wIndex
, &ehci
->companion_ports
)) {
893 temp
&= ~PORT_RWC_BITS
;
895 ehci_writel(ehci
, temp
, status_reg
);
896 ehci_dbg(ehci
, "port %d --> companion\n", wIndex
+ 1);
897 temp
= ehci_readl(ehci
, status_reg
);
901 * Even if OWNER is set, there's no harm letting khubd
902 * see the wPortStatus values (they should all be 0 except
903 * for PORT_POWER anyway).
906 if (temp
& PORT_CONNECT
) {
907 status
|= USB_PORT_STAT_CONNECTION
;
908 // status may be from integrated TT
909 if (ehci
->has_hostpc
) {
910 temp1
= ehci_readl(ehci
, hostpc_reg
);
911 status
|= ehci_port_speed(ehci
, temp1
);
913 status
|= ehci_port_speed(ehci
, temp
);
916 status
|= USB_PORT_STAT_ENABLE
;
918 /* maybe the port was unsuspended without our knowledge */
919 if (temp
& (PORT_SUSPEND
|PORT_RESUME
)) {
920 status
|= USB_PORT_STAT_SUSPEND
;
921 } else if (test_bit(wIndex
, &ehci
->suspended_ports
)) {
922 clear_bit(wIndex
, &ehci
->suspended_ports
);
923 clear_bit(wIndex
, &ehci
->resuming_ports
);
924 ehci
->reset_done
[wIndex
] = 0;
926 set_bit(wIndex
, &ehci
->port_c_suspend
);
930 status
|= USB_PORT_STAT_OVERCURRENT
;
931 if (temp
& PORT_RESET
)
932 status
|= USB_PORT_STAT_RESET
;
933 if (temp
& PORT_POWER
)
934 status
|= USB_PORT_STAT_POWER
;
935 if (test_bit(wIndex
, &ehci
->port_c_suspend
))
936 status
|= USB_PORT_STAT_C_SUSPEND
<< 16;
938 #ifndef VERBOSE_DEBUG
939 if (status
& ~0xffff) /* only if wPortChange is interesting */
941 dbg_port (ehci
, "GetStatus", wIndex
+ 1, temp
);
942 put_unaligned_le32(status
, buf
);
946 case C_HUB_LOCAL_POWER
:
947 case C_HUB_OVER_CURRENT
:
948 /* no hub-wide feature/status flags */
955 selector
= wIndex
>> 8;
957 if (unlikely(ehci
->debug
)) {
958 /* If the debug port is active any port
959 * feature requests should get denied */
960 if (wIndex
== HCS_DEBUG_PORT(ehci
->hcs_params
) &&
961 (readl(&ehci
->debug
->control
) & DBGP_ENABLED
)) {
966 if (!wIndex
|| wIndex
> ports
)
969 temp
= ehci_readl(ehci
, status_reg
);
970 if (temp
& PORT_OWNER
)
973 temp
&= ~PORT_RWC_BITS
;
975 case USB_PORT_FEAT_SUSPEND
:
976 if (ehci
->no_selective_suspend
)
978 if ((temp
& PORT_PE
) == 0
979 || (temp
& PORT_RESET
) != 0)
982 /* After above check the port must be connected.
983 * Set appropriate bit thus could put phy into low power
984 * mode if we have hostpc feature
986 temp
&= ~PORT_WKCONN_E
;
987 temp
|= PORT_WKDISC_E
| PORT_WKOC_E
;
988 ehci_writel(ehci
, temp
| PORT_SUSPEND
, status_reg
);
990 spin_unlock_irqrestore(&ehci
->lock
, flags
);
991 msleep(5);/* 5ms for HCD enter low pwr mode */
992 spin_lock_irqsave(&ehci
->lock
, flags
);
993 temp1
= ehci_readl(ehci
, hostpc_reg
);
994 ehci_writel(ehci
, temp1
| HOSTPC_PHCD
,
996 temp1
= ehci_readl(ehci
, hostpc_reg
);
997 ehci_dbg(ehci
, "Port%d phy low pwr mode %s\n",
998 wIndex
, (temp1
& HOSTPC_PHCD
) ?
999 "succeeded" : "failed");
1001 set_bit(wIndex
, &ehci
->suspended_ports
);
1003 case USB_PORT_FEAT_POWER
:
1004 if (HCS_PPC (ehci
->hcs_params
))
1005 ehci_writel(ehci
, temp
| PORT_POWER
,
1008 case USB_PORT_FEAT_RESET
:
1009 if (temp
& PORT_RESUME
)
1011 /* line status bits may report this as low speed,
1012 * which can be fine if this root hub has a
1013 * transaction translator built in.
1015 if ((temp
& (PORT_PE
|PORT_CONNECT
)) == PORT_CONNECT
1016 && !ehci_is_TDI(ehci
)
1017 && PORT_USB11 (temp
)) {
1019 "port %d low speed --> companion\n",
1023 ehci_vdbg (ehci
, "port %d reset\n", wIndex
+ 1);
1028 * caller must wait, then call GetPortStatus
1029 * usb 2.0 spec says 50 ms resets on root
1031 ehci
->reset_done
[wIndex
] = jiffies
1032 + msecs_to_jiffies (50);
1034 ehci_writel(ehci
, temp
, status_reg
);
1037 /* For downstream facing ports (these): one hub port is put
1038 * into test mode according to USB2 11.24.2.13, then the hub
1039 * must be reset (which for root hub now means rmmod+modprobe,
1040 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1041 * about the EHCI-specific stuff.
1043 case USB_PORT_FEAT_TEST
:
1044 if (!selector
|| selector
> 5)
1048 /* Put all enabled ports into suspend */
1051 &ehci
->regs
->port_status
[ports
];
1053 temp
= ehci_readl(ehci
, sreg
) & ~PORT_RWC_BITS
;
1055 ehci_writel(ehci
, temp
| PORT_SUSPEND
,
1059 temp
= ehci_readl(ehci
, status_reg
);
1060 temp
|= selector
<< 16;
1061 ehci_writel(ehci
, temp
, status_reg
);
1067 ehci_readl(ehci
, &ehci
->regs
->command
); /* unblock posted writes */
1072 /* "stall" on error */
1076 spin_unlock_irqrestore (&ehci
->lock
, flags
);
1080 static void __maybe_unused
ehci_relinquish_port(struct usb_hcd
*hcd
,
1083 struct ehci_hcd
*ehci
= hcd_to_ehci(hcd
);
1085 if (ehci_is_TDI(ehci
))
1087 set_owner(ehci
, --portnum
, PORT_OWNER
);
1090 static int __maybe_unused
ehci_port_handed_over(struct usb_hcd
*hcd
,
1093 struct ehci_hcd
*ehci
= hcd_to_ehci(hcd
);
1096 if (ehci_is_TDI(ehci
))
1098 reg
= &ehci
->regs
->port_status
[portnum
- 1];
1099 return ehci_readl(ehci
, reg
) & PORT_OWNER
;