drivers/usb/Kconfig

   1 #
   2 # USB device configuration
   3 #
   4
   5 menuconfig USB_SUPPORT
   6         bool "USB support"
   7         depends on HAS_IOMEM
   8         default y
   9         ---help---
  10           This option adds core support for Universal Serial Bus (USB).
  11           You will also need drivers from the following menu to make use of it.
  12
  13 if USB_SUPPORT
  14
  15 # Host-side USB depends on having a host controller
  16 # NOTE:  dummy_hcd is always an option, but it's ignored here ...
  17 # NOTE:  SL-811 option should be board-specific ...
  18 config USB_ARCH_HAS_HCD
  19         boolean
  20         default y if USB_ARCH_HAS_OHCI
  21         default y if USB_ARCH_HAS_EHCI
  22         default y if PCMCIA && !M32R                    # sl811_cs
  23         default y if ARM                                # SL-811
  24         default y if SUPERH                             # r8a66597-hcd
  25         default PCI
  26
  27 # many non-PCI SOC chips embed OHCI
  28 config USB_ARCH_HAS_OHCI
  29         boolean
  30         # ARM:
  31         default y if SA1111
  32         default y if ARCH_OMAP
  33         default y if ARCH_LH7A404
  34         default y if ARCH_S3C2410
  35         default y if PXA27x
  36         default y if PXA3xx
  37         default y if ARCH_EP93XX
  38         default y if ARCH_AT91
  39         default y if ARCH_PNX4008 && I2C
  40         default y if MFD_TC6393XB
  41         default y if ARCH_W90X900
  42         # PPC:
  43         default y if STB03xxx
  44         default y if PPC_MPC52xx
  45         # MIPS:
  46         default y if SOC_AU1X00
  47         # SH:
  48         default y if CPU_SUBTYPE_SH7720
  49         default y if CPU_SUBTYPE_SH7721
  50         default y if CPU_SUBTYPE_SH7763
  51         default y if CPU_SUBTYPE_SH7786
  52         # more:
  53         default PCI
  54
  55 # some non-PCI hcds implement EHCI
  56 config USB_ARCH_HAS_EHCI
  57         boolean
  58         default y if PPC_83xx
  59         default y if SOC_AU1200
  60         default y if ARCH_IXP4XX
  61         default y if ARCH_W90X900
  62         default y if ARCH_AT91SAM9G45
  63         default PCI
  64
  65 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
  66 config USB
  67         tristate "Support for Host-side USB"
  68         depends on USB_ARCH_HAS_HCD
  69         select NLS  # for UTF-8 strings
  70         ---help---
  71           Universal Serial Bus (USB) is a specification for a serial bus
  72           subsystem which offers higher speeds and more features than the
  73           traditional PC serial port.  The bus supplies power to peripherals
  74           and allows for hot swapping.  Up to 127 USB peripherals can be
  75           connected to a single USB host in a tree structure.
  76
  77           The USB host is the root of the tree, the peripherals are the
  78           leaves and the inner nodes are special USB devices called hubs.
  79           Most PCs now have USB host ports, used to connect peripherals
  80           such as scanners, keyboards, mice, modems, cameras, disks,
  81           flash memory, network links, and printers to the PC.
  82
  83           Say Y here if your computer has a host-side USB port and you want
  84           to use USB devices.  You then need to say Y to at least one of the
  85           Host Controller Driver (HCD) options below.  Choose a USB 1.1
  86           controller, such as "UHCI HCD support" or "OHCI HCD support",
  87           and "EHCI HCD (USB 2.0) support" except for older systems that
  88           do not have USB 2.0 support.  It doesn't normally hurt to select
  89           them all if you are not certain.
  90
  91           If your system has a device-side USB port, used in the peripheral
  92           side of the USB protocol, see the "USB Gadget" framework instead.
  93
  94           After choosing your HCD, then select drivers for the USB peripherals
  95           you'll be using.  You may want to check out the information provided
  96           in <file:Documentation/usb/> and especially the links given in
  97           <file:Documentation/usb/usb-help.txt>.
  98
  99           To compile this driver as a module, choose M here: the
 100           module will be called usbcore.
 101
 102 source "drivers/usb/core/Kconfig"
 103
 104 source "drivers/usb/mon/Kconfig"
 105
 106 source "drivers/usb/wusbcore/Kconfig"
 107
 108 source "drivers/usb/host/Kconfig"
 109
 110 source "drivers/usb/musb/Kconfig"
 111
 112 source "drivers/usb/class/Kconfig"
 113
 114 source "drivers/usb/storage/Kconfig"
 115
 116 source "drivers/usb/image/Kconfig"
 117
 118 comment "USB port drivers"
 119         depends on USB
 120
 121 config USB_USS720
 122         tristate "USS720 parport driver"
 123         depends on USB && PARPORT
 124         select PARPORT_NOT_PC
 125         ---help---
 126           This driver is for USB parallel port adapters that use the Lucent
 127           Technologies USS-720 chip. These cables are plugged into your USB
 128           port and provide USB compatibility to peripherals designed with
 129           parallel port interfaces.
 130
 131           The chip has two modes: automatic mode and manual mode. In automatic
 132           mode, it looks to the computer like a standard USB printer. Only
 133           printers may be connected to the USS-720 in this mode. The generic
 134           USB printer driver ("USB Printer support", above) may be used in
 135           that mode, and you can say N here if you want to use the chip only
 136           in this mode.
 137
 138           Manual mode is not limited to printers, any parallel port
 139           device should work. This driver utilizes manual mode.
 140           Note however that some operations are three orders of magnitude
 141           slower than on a PCI/ISA Parallel Port, so timing critical
 142           applications might not work.
 143
 144           Say Y here if you own an USS-720 USB->Parport cable and intend to
 145           connect anything other than a printer to it.
 146
 147           To compile this driver as a module, choose M here: the
 148           module will be called uss720.
 149
 150 source "drivers/usb/serial/Kconfig"
 151
 152 source "drivers/usb/misc/Kconfig"
 153
 154 source "drivers/usb/atm/Kconfig"
 155
 156 source "drivers/usb/gadget/Kconfig"
 157
 158 source "drivers/usb/otg/Kconfig"
 159
 160 endif # USB_SUPPORT