drivers/usb/Kconfig

   1 #
   2 # USB device configuration
   3 #
   4
   5 menuconfig USB_SUPPORT
   6         bool "USB support"
   7         depends on HAS_IOMEM
   8         default y
   9         ---help---
  10           This option adds core support for Universal Serial Bus (USB).
  11           You will also need drivers from the following menu to make use of it.
  12
  13 if USB_SUPPORT
  14
  15 # Host-side USB depends on having a host controller
  16 # NOTE:  dummy_hcd is always an option, but it's ignored here ...
  17 # NOTE:  SL-811 option should be board-specific ...
  18 config USB_ARCH_HAS_HCD
  19         boolean
  20         default y if USB_ARCH_HAS_OHCI
  21         default y if USB_ARCH_HAS_EHCI
  22         default y if PCMCIA && !M32R                    # sl811_cs
  23         default y if ARM                                # SL-811
  24         default y if SUPERH                             # r8a66597-hcd
  25         default y if MICROBLAZE
  26         default PCI
  27
  28 # many non-PCI SOC chips embed OHCI
  29 config USB_ARCH_HAS_OHCI
  30         boolean
  31         # ARM:
  32         default y if SA1111
  33         default y if ARCH_OMAP
  34         default y if ARCH_LH7A404
  35         default y if ARCH_S3C2410
  36         default y if PXA27x
  37         default y if PXA3xx
  38         default y if ARCH_EP93XX
  39         default y if ARCH_AT91
  40         default y if ARCH_PNX4008 && I2C
  41         default y if MFD_TC6393XB
  42         # PPC:
  43         default y if STB03xxx
  44         default y if PPC_MPC52xx
  45         # MIPS:
  46         default y if SOC_AU1X00
  47         # SH:
  48         default y if CPU_SUBTYPE_SH7720
  49         default y if CPU_SUBTYPE_SH7721
  50         default y if CPU_SUBTYPE_SH7763
  51         default y if CPU_SUBTYPE_SH7786
  52         # more:
  53         default PCI
  54
  55 # some non-PCI hcds implement EHCI
  56 config USB_ARCH_HAS_EHCI
  57         boolean
  58         default y if PPC_83xx
  59         default y if SOC_AU1200
  60         default y if ARCH_IXP4XX
  61         default PCI
  62
  63 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
  64 config USB
  65         tristate "Support for Host-side USB"
  66         depends on USB_ARCH_HAS_HCD
  67         ---help---
  68           Universal Serial Bus (USB) is a specification for a serial bus
  69           subsystem which offers higher speeds and more features than the
  70           traditional PC serial port.  The bus supplies power to peripherals
  71           and allows for hot swapping.  Up to 127 USB peripherals can be
  72           connected to a single USB host in a tree structure.
  73
  74           The USB host is the root of the tree, the peripherals are the
  75           leaves and the inner nodes are special USB devices called hubs.
  76           Most PCs now have USB host ports, used to connect peripherals
  77           such as scanners, keyboards, mice, modems, cameras, disks,
  78           flash memory, network links, and printers to the PC.
  79
  80           Say Y here if your computer has a host-side USB port and you want
  81           to use USB devices.  You then need to say Y to at least one of the
  82           Host Controller Driver (HCD) options below.  Choose a USB 1.1
  83           controller, such as "UHCI HCD support" or "OHCI HCD support",
  84           and "EHCI HCD (USB 2.0) support" except for older systems that
  85           do not have USB 2.0 support.  It doesn't normally hurt to select
  86           them all if you are not certain.
  87
  88           If your system has a device-side USB port, used in the peripheral
  89           side of the USB protocol, see the "USB Gadget" framework instead.
  90
  91           After choosing your HCD, then select drivers for the USB peripherals
  92           you'll be using.  You may want to check out the information provided
  93           in <file:Documentation/usb/> and especially the links given in
  94           <file:Documentation/usb/usb-help.txt>.
  95
  96           To compile this driver as a module, choose M here: the
  97           module will be called usbcore.
  98
  99 source "drivers/usb/core/Kconfig"
 100
 101 source "drivers/usb/mon/Kconfig"
 102
 103 source "drivers/usb/wusbcore/Kconfig"
 104
 105 source "drivers/usb/host/Kconfig"
 106
 107 source "drivers/usb/musb/Kconfig"
 108
 109 source "drivers/usb/class/Kconfig"
 110
 111 source "drivers/usb/storage/Kconfig"
 112
 113 source "drivers/usb/image/Kconfig"
 114
 115 comment "USB port drivers"
 116         depends on USB
 117
 118 config USB_USS720
 119         tristate "USS720 parport driver"
 120         depends on USB && PARPORT
 121         select PARPORT_NOT_PC
 122         ---help---
 123           This driver is for USB parallel port adapters that use the Lucent
 124           Technologies USS-720 chip. These cables are plugged into your USB
 125           port and provide USB compatibility to peripherals designed with
 126           parallel port interfaces.
 127
 128           The chip has two modes: automatic mode and manual mode. In automatic
 129           mode, it looks to the computer like a standard USB printer. Only
 130           printers may be connected to the USS-720 in this mode. The generic
 131           USB printer driver ("USB Printer support", above) may be used in
 132           that mode, and you can say N here if you want to use the chip only
 133           in this mode.
 134
 135           Manual mode is not limited to printers, any parallel port
 136           device should work. This driver utilizes manual mode.
 137           Note however that some operations are three orders of magnitude
 138           slower than on a PCI/ISA Parallel Port, so timing critical
 139           applications might not work.
 140
 141           Say Y here if you own an USS-720 USB->Parport cable and intend to
 142           connect anything other than a printer to it.
 143
 144           To compile this driver as a module, choose M here: the
 145           module will be called uss720.
 146
 147 source "drivers/usb/serial/Kconfig"
 148
 149 source "drivers/usb/misc/Kconfig"
 150
 151 source "drivers/usb/atm/Kconfig"
 152
 153 source "drivers/usb/gadget/Kconfig"
 154
 155 source "drivers/usb/otg/Kconfig"
 156
 157 endif # USB_SUPPORT