drivers/usb/Kconfig

   1 #
   2 # USB device configuration
   3 #
   4
   5 menuconfig USB_SUPPORT
   6         bool "USB support"
   7         depends on HAS_IOMEM
   8         default y
   9         ---help---
  10           This option adds core support for Universal Serial Bus (USB).
  11           You will also need drivers from the following menu to make use of it.
  12
  13 # many non-PCI SOC chips embed OHCI
  14 config USB_ARCH_HAS_OHCI
  15         boolean
  16         # ARM:
  17         default y if SA1111
  18         default y if ARCH_OMAP
  19         default y if ARCH_S3C24XX
  20         default y if PXA27x
  21         default y if PXA3xx
  22         default y if ARCH_EP93XX
  23         default y if ARCH_AT91
  24         default y if ARCH_PNX4008 && I2C
  25         default y if MFD_TC6393XB
  26         default y if ARCH_W90X900
  27         default y if ARCH_DAVINCI_DA8XX
  28         default y if ARCH_CNS3XXX
  29         default y if PLAT_SPEAR
  30         default y if ARCH_EXYNOS
  31         # PPC:
  32         default y if STB03xxx
  33         default y if PPC_MPC52xx
  34         # MIPS:
  35         default y if MIPS_ALCHEMY
  36         default y if MACH_JZ4740
  37         # more:
  38         default PCI
  39
  40 # some non-PCI hcds implement EHCI
  41 config USB_ARCH_HAS_EHCI
  42         boolean
  43         default y if FSL_SOC
  44         default y if PPC_MPC512x
  45         default y if ARCH_IXP4XX
  46         default y if ARCH_W90X900
  47         default y if ARCH_AT91
  48         default y if ARCH_MXC
  49         default y if ARCH_OMAP3
  50         default y if ARCH_CNS3XXX
  51         default y if ARCH_VT8500
  52         default y if PLAT_SPEAR
  53         default y if PLAT_S5P
  54         default y if ARCH_MSM
  55         default y if MICROBLAZE
  56         default y if SPARC_LEON
  57         default y if ARCH_MMP
  58         default y if MACH_LOONGSON1
  59         default PCI
  60
  61 # some non-PCI HCDs implement xHCI
  62 config USB_ARCH_HAS_XHCI
  63         boolean
  64         default PCI
  65
  66 if USB_SUPPORT
  67
  68 config USB_COMMON
  69         tristate
  70         default y
  71         depends on USB || USB_GADGET
  72
  73 # Host-side USB depends on having a host controller
  74 # NOTE:  dummy_hcd is always an option, but it's ignored here ...
  75 # NOTE:  SL-811 option should be board-specific ...
  76 config USB_ARCH_HAS_HCD
  77         boolean
  78         default y if USB_ARCH_HAS_OHCI
  79         default y if USB_ARCH_HAS_EHCI
  80         default y if USB_ARCH_HAS_XHCI
  81         default y if PCMCIA && !M32R                    # sl811_cs
  82         default y if ARM                                # SL-811
  83         default y if BLACKFIN                           # SL-811
  84         default y if SUPERH                             # r8a66597-hcd
  85         default PCI
  86
  87 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
  88 config USB
  89         tristate "Support for Host-side USB"
  90         depends on USB_ARCH_HAS_HCD
  91         select NLS  # for UTF-8 strings
  92         ---help---
  93           Universal Serial Bus (USB) is a specification for a serial bus
  94           subsystem which offers higher speeds and more features than the
  95           traditional PC serial port.  The bus supplies power to peripherals
  96           and allows for hot swapping.  Up to 127 USB peripherals can be
  97           connected to a single USB host in a tree structure.
  98
  99           The USB host is the root of the tree, the peripherals are the
 100           leaves and the inner nodes are special USB devices called hubs.
 101           Most PCs now have USB host ports, used to connect peripherals
 102           such as scanners, keyboards, mice, modems, cameras, disks,
 103           flash memory, network links, and printers to the PC.
 104
 105           Say Y here if your computer has a host-side USB port and you want
 106           to use USB devices.  You then need to say Y to at least one of the
 107           Host Controller Driver (HCD) options below.  Choose a USB 1.1
 108           controller, such as "UHCI HCD support" or "OHCI HCD support",
 109           and "EHCI HCD (USB 2.0) support" except for older systems that
 110           do not have USB 2.0 support.  It doesn't normally hurt to select
 111           them all if you are not certain.
 112
 113           If your system has a device-side USB port, used in the peripheral
 114           side of the USB protocol, see the "USB Gadget" framework instead.
 115
 116           After choosing your HCD, then select drivers for the USB peripherals
 117           you'll be using.  You may want to check out the information provided
 118           in <file:Documentation/usb/> and especially the links given in
 119           <file:Documentation/usb/usb-help.txt>.
 120
 121           To compile this driver as a module, choose M here: the
 122           module will be called usbcore.
 123
 124 source "drivers/usb/core/Kconfig"
 125
 126 source "drivers/usb/dwc3/Kconfig"
 127
 128 source "drivers/usb/mon/Kconfig"
 129
 130 source "drivers/usb/wusbcore/Kconfig"
 131
 132 source "drivers/usb/host/Kconfig"
 133
 134 source "drivers/usb/musb/Kconfig"
 135
 136 source "drivers/usb/renesas_usbhs/Kconfig"
 137
 138 source "drivers/usb/class/Kconfig"
 139
 140 source "drivers/usb/storage/Kconfig"
 141
 142 source "drivers/usb/image/Kconfig"
 143
 144 comment "USB port drivers"
 145         depends on USB
 146
 147 config USB_USS720
 148         tristate "USS720 parport driver"
 149         depends on USB && PARPORT
 150         select PARPORT_NOT_PC
 151         ---help---
 152           This driver is for USB parallel port adapters that use the Lucent
 153           Technologies USS-720 chip. These cables are plugged into your USB
 154           port and provide USB compatibility to peripherals designed with
 155           parallel port interfaces.
 156
 157           The chip has two modes: automatic mode and manual mode. In automatic
 158           mode, it looks to the computer like a standard USB printer. Only
 159           printers may be connected to the USS-720 in this mode. The generic
 160           USB printer driver ("USB Printer support", above) may be used in
 161           that mode, and you can say N here if you want to use the chip only
 162           in this mode.
 163
 164           Manual mode is not limited to printers, any parallel port
 165           device should work. This driver utilizes manual mode.
 166           Note however that some operations are three orders of magnitude
 167           slower than on a PCI/ISA Parallel Port, so timing critical
 168           applications might not work.
 169
 170           Say Y here if you own an USS-720 USB->Parport cable and intend to
 171           connect anything other than a printer to it.
 172
 173           To compile this driver as a module, choose M here: the
 174           module will be called uss720.
 175
 176 source "drivers/usb/serial/Kconfig"
 177
 178 source "drivers/usb/misc/Kconfig"
 179
 180 source "drivers/usb/atm/Kconfig"
 181
 182 source "drivers/usb/gadget/Kconfig"
 183
 184 source "drivers/usb/otg/Kconfig"
 185
 186 endif # USB_SUPPORT