drivers/staging/keucr/usb.h

   1 // Driver for USB Mass Storage compliant devices
   2
   3 #ifndef _USB_H_
   4 #define _USB_H_
   5
   6 #include <linux/usb.h>
   7 #include <linux/usb_usual.h>
   8 #include <linux/blkdev.h>
   9 #include <linux/completion.h>
  10 #include <linux/mutex.h>
  11 #include <scsi/scsi_host.h>
  12 #include "common.h"
  13
  14 struct us_data;
  15 struct scsi_cmnd;
  16
  17 /*
  18  * Unusual device list definitions
  19  */
  20
  21 struct us_unusual_dev {
  22         const char* vendorName;
  23         const char* productName;
  24         __u8  useProtocol;
  25         __u8  useTransport;
  26         int (*initFunction)(struct us_data *);
  27 };
  28
  29 //EnE HW Register
  30 #define REG_CARD_STATUS     0xFF83
  31 #define REG_HW_TRAP1        0xFF89
  32
  33 // SRB Status. Refers /usr/include/wine/wine/wnaspi32.h & SCSI sense key
  34 #define SS_SUCCESS                  0x00      // No Sense
  35 #define SS_NOT_READY                0x02
  36 #define SS_MEDIUM_ERR               0x03
  37 #define SS_HW_ERR                   0x04
  38 #define SS_ILLEGAL_REQUEST          0x05
  39 #define SS_UNIT_ATTENTION           0x06
  40
  41 //ENE Load FW Pattern
  42 #define SD_INIT1_PATTERN   1
  43 #define SD_INIT2_PATTERN   2
  44 #define SD_RW_PATTERN      3
  45 #define MS_INIT_PATTERN    4
  46 #define MSP_RW_PATTERN     5
  47 #define MS_RW_PATTERN      6
  48 #define SM_INIT_PATTERN    7
  49 #define SM_RW_PATTERN      8
  50
  51 #define FDIR_WRITE        0
  52 #define FDIR_READ         1
  53
  54 typedef struct _SD_STATUS {
  55     BYTE    Insert:1;
  56     BYTE    Ready:1;
  57     BYTE    MediaChange:1;
  58     BYTE    IsMMC:1;
  59     BYTE    HiCapacity:1;
  60     BYTE    HiSpeed:1;
  61     BYTE    WtP:1;
  62     BYTE    Reserved:1;
  63 } SD_STATUS, *PSD_STATUS;
  64
  65 typedef struct _MS_STATUS {
  66     BYTE    Insert:1;
  67     BYTE    Ready:1;
  68     BYTE    MediaChange:1;
  69     BYTE    IsMSPro:1;
  70     BYTE    IsMSPHG:1;
  71     BYTE    Reserved1:1;
  72     BYTE    WtP:1;
  73     BYTE    Reserved2:1;
  74 } MS_STATUS, *PMS_STATUS;
  75
  76 typedef struct _SM_STATUS {
  77     BYTE    Insert:1;
  78     BYTE    Ready:1;
  79     BYTE    MediaChange:1;
  80     BYTE    Reserved:3;
  81     BYTE    WtP:1;
  82     BYTE    IsMS:1;
  83 } SM_STATUS, *PSM_STATUS;
  84
  85 // SD Block Length
  86 #define SD_BLOCK_LEN                            9       // 2^9 = 512 Bytes, The HW maximum read/write data length
  87
  88 /* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
  89 #define US_FLIDX_URB_ACTIVE     0       /* current_urb is in use    */
  90 #define US_FLIDX_SG_ACTIVE      1       /* current_sg is in use     */
  91 #define US_FLIDX_ABORTING       2       /* abort is in progress     */
  92 #define US_FLIDX_DISCONNECTING  3       /* disconnect in progress   */
  93 #define US_FLIDX_RESETTING      4       /* device reset in progress */
  94 #define US_FLIDX_TIMED_OUT      5       /* SCSI midlayer timed out  */
  95 #define US_FLIDX_DONT_SCAN      6       /* don't scan (disconnect)  */
  96
  97
  98 #define USB_STOR_STRING_LEN 32
  99
 100 /*
 101  * We provide a DMA-mapped I/O buffer for use with small USB transfers.
 102  * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
 103  * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
 104  * size we'll allocate.
 105  */
 106
 107 #define US_IOBUF_SIZE           64      /* Size of the DMA-mapped I/O buffer */
 108 #define US_SENSE_SIZE           18      /* Size of the autosense data buffer */
 109
 110 typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
 111 typedef int (*trans_reset)(struct us_data*);
 112 typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
 113 typedef void (*extra_data_destructor)(void *);  /* extra data destructor */
 114 typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
 115
 116 #define US_SUSPEND      0
 117 #define US_RESUME       1
 118
 119 /* we allocate one of these for every device that we remember */
 120 struct us_data {
 121         /* The device we're working with
 122          * It's important to note:
 123          *    (o) you must hold dev_mutex to change pusb_dev
 124          */
 125         struct mutex            dev_mutex;       /* protect pusb_dev */
 126         struct usb_device       *pusb_dev;       /* this usb_device */
 127         struct usb_interface    *pusb_intf;      /* this interface */
 128         struct us_unusual_dev   *unusual_dev;    /* device-filter entry     */
 129         unsigned long           fflags;          /* fixed flags from filter */
 130         unsigned long           dflags;          /* dynamic atomic bitflags */
 131         unsigned int            send_bulk_pipe;  /* cached pipe values */
 132         unsigned int            recv_bulk_pipe;
 133         unsigned int            send_ctrl_pipe;
 134         unsigned int            recv_ctrl_pipe;
 135         unsigned int            recv_intr_pipe;
 136
 137         /* information about the device */
 138         char                    *transport_name;
 139         char                    *protocol_name;
 140         __le32                  bcs_signature;
 141         u8                      subclass;
 142         u8                      protocol;
 143         u8                      max_lun;
 144
 145         u8                      ifnum;           /* interface number   */
 146         u8                      ep_bInterval;    /* interrupt interval */
 147
 148         /* function pointers for this device */
 149         trans_cmnd              transport;       /* transport function     */
 150         trans_reset             transport_reset; /* transport device reset */
 151         proto_cmnd              proto_handler;   /* protocol handler       */
 152
 153         /* SCSI interfaces */
 154         struct scsi_cmnd        *srb;            /* current srb         */
 155         unsigned int            tag;             /* current dCBWTag     */
 156
 157         /* control and bulk communications data */
 158         struct urb              *current_urb;    /* USB requests         */
 159         struct usb_ctrlrequest  *cr;             /* control requests     */
 160         struct usb_sg_request   current_sg;      /* scatter-gather req.  */
 161         unsigned char           *iobuf;          /* I/O buffer           */
 162         unsigned char           *sensebuf;       /* sense data buffer    */
 163         dma_addr_t              cr_dma;          /* buffer DMA addresses */
 164         dma_addr_t              iobuf_dma;
 165         struct task_struct      *ctl_thread;     /* the control thread   */
 166
 167         /* mutual exclusion and synchronization structures */
 168         struct completion       cmnd_ready;      /* to sleep thread on      */
 169         struct completion       notify;          /* thread begin/end        */
 170         wait_queue_head_t       delay_wait;      /* wait during scan, reset */
 171         struct completion       scanning_done;   /* wait for scan thread    */
 172
 173         /* subdriver information */
 174         void                    *extra;          /* Any extra data          */
 175         extra_data_destructor   extra_destructor;/* extra data destructor   */
 176 #ifdef CONFIG_PM
 177         pm_hook                 suspend_resume_hook;
 178 #endif
 179         // for 6250 code
 180         SD_STATUS   SD_Status;
 181         MS_STATUS   MS_Status;
 182         SM_STATUS   SM_Status;
 183
 184         //----- SD Control Data ----------------
 185         //SD_REGISTER SD_Regs;
 186         WORD        SD_Block_Mult;
 187         BYTE        SD_READ_BL_LEN;
 188         WORD        SD_C_SIZE;
 189         BYTE        SD_C_SIZE_MULT;
 190
 191         // SD/MMC New spec.
 192         BYTE        SD_SPEC_VER;
 193         BYTE        SD_CSD_VER;
 194         BYTE        SD20_HIGH_CAPACITY;
 195         DWORD       HC_C_SIZE;
 196         BYTE        MMC_SPEC_VER;
 197         BYTE        MMC_BusWidth;
 198         BYTE        MMC_HIGH_CAPACITY;
 199
 200         //----- MS Control Data ----------------
 201         BOOLEAN             MS_SWWP;
 202         DWORD               MSP_TotalBlock;
 203         /* MS_LibControl       MS_Lib; */
 204         BOOLEAN             MS_IsRWPage;
 205         WORD                MS_Model;
 206
 207         //----- SM Control Data ----------------
 208         BYTE            SM_DeviceID;
 209         BYTE            SM_CardID;
 210
 211         PBYTE           testbuf;
 212         BYTE            BIN_FLAG;
 213         DWORD           bl_num;
 214         int             SrbStatus;
 215
 216         //------Power Managerment ---------------
 217         BOOLEAN         Power_IsResum;
 218 };
 219
 220 /* Convert between us_data and the corresponding Scsi_Host */
 221 static inline struct Scsi_Host *us_to_host(struct us_data *us) {
 222         return container_of((void *) us, struct Scsi_Host, hostdata);
 223 }
 224 static inline struct us_data *host_to_us(struct Scsi_Host *host) {
 225         return (struct us_data *) host->hostdata;
 226 }
 227
 228 /* Function to fill an inquiry response. See usb.c for details */
 229 extern void fill_inquiry_response(struct us_data *us,
 230         unsigned char *data, unsigned int data_len);
 231
 232 /* The scsi_lock() and scsi_unlock() macros protect the sm_state and the
 233  * single queue element srb for write access */
 234 #define scsi_unlock(host)       spin_unlock_irq(host->host_lock)
 235 #define scsi_lock(host)         spin_lock_irq(host->host_lock)
 236
 237 #endif