2 comedi/drivers/dt2817.c
3 Hardware driver for Data Translation DT2817
5 COMEDI - Linux Control and Measurement Device Interface
6 Copyright (C) 1998 David A. Schleef <ds@schleef.org>
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 Description: Data Translation DT2817
28 Devices: [Data Translation] DT2817 (dt2817)
30 A very simple digital I/O card. Four banks of 8 lines, each bank
31 is configurable for input or output. One wonders why it takes a
32 50 page manual to describe this thing.
34 The driver (which, btw, is much less than 50 pages) has 1 subdevice
35 with 32 channels, configurable in groups of 8.
37 Configuration options:
38 [0] - I/O port base base address
41 #include "../comedidev.h"
43 #include <linux/ioport.h>
50 static int dt2817_attach(struct comedi_device
*dev
,
51 struct comedi_devconfig
*it
);
52 static int dt2817_detach(struct comedi_device
*dev
);
53 static struct comedi_driver driver_dt2817
= {
54 .driver_name
= "dt2817",
55 .module
= THIS_MODULE
,
56 .attach
= dt2817_attach
,
57 .detach
= dt2817_detach
,
60 COMEDI_INITCLEANUP(driver_dt2817
);
62 static int dt2817_dio_insn_config(struct comedi_device
*dev
,
63 struct comedi_subdevice
*s
,
64 struct comedi_insn
*insn
, unsigned int *data
)
73 chan
= CR_CHAN(insn
->chanspec
);
76 } else if (chan
< 16) {
78 } else if (chan
< 24) {
87 if (s
->io_bits
& 0x000000ff)
89 if (s
->io_bits
& 0x0000ff00)
91 if (s
->io_bits
& 0x00ff0000)
93 if (s
->io_bits
& 0xff000000)
96 outb(oe
, dev
->iobase
+ DT2817_CR
);
101 static int dt2817_dio_insn_bits(struct comedi_device
*dev
,
102 struct comedi_subdevice
*s
,
103 struct comedi_insn
*insn
, unsigned int *data
)
105 unsigned int changed
;
107 /* It's questionable whether it is more important in
108 * a driver like this to be deterministic or fast.
113 s
->state
&= ~data
[0];
114 s
->state
|= (data
[0] & data
[1]);
116 changed
&= s
->io_bits
;
117 if (changed
& 0x000000ff)
118 outb(s
->state
& 0xff, dev
->iobase
+ DT2817_DATA
+ 0);
119 if (changed
& 0x0000ff00)
120 outb((s
->state
>> 8) & 0xff,
121 dev
->iobase
+ DT2817_DATA
+ 1);
122 if (changed
& 0x00ff0000)
123 outb((s
->state
>> 16) & 0xff,
124 dev
->iobase
+ DT2817_DATA
+ 2);
125 if (changed
& 0xff000000)
126 outb((s
->state
>> 24) & 0xff,
127 dev
->iobase
+ DT2817_DATA
+ 3);
129 data
[1] = inb(dev
->iobase
+ DT2817_DATA
+ 0);
130 data
[1] |= (inb(dev
->iobase
+ DT2817_DATA
+ 1) << 8);
131 data
[1] |= (inb(dev
->iobase
+ DT2817_DATA
+ 2) << 16);
132 data
[1] |= (inb(dev
->iobase
+ DT2817_DATA
+ 3) << 24);
137 static int dt2817_attach(struct comedi_device
*dev
, struct comedi_devconfig
*it
)
140 struct comedi_subdevice
*s
;
141 unsigned long iobase
;
143 iobase
= it
->options
[0];
144 printk("comedi%d: dt2817: 0x%04lx ", dev
->minor
, iobase
);
145 if (!request_region(iobase
, DT2817_SIZE
, "dt2817")) {
146 printk("I/O port conflict\n");
149 dev
->iobase
= iobase
;
150 dev
->board_name
= "dt2817";
152 ret
= alloc_subdevices(dev
, 1);
156 s
= dev
->subdevices
+ 0;
159 s
->type
= COMEDI_SUBD_DIO
;
160 s
->subdev_flags
= SDF_READABLE
| SDF_WRITABLE
;
161 s
->range_table
= &range_digital
;
163 s
->insn_bits
= dt2817_dio_insn_bits
;
164 s
->insn_config
= dt2817_dio_insn_config
;
167 outb(0, dev
->iobase
+ DT2817_CR
);
174 static int dt2817_detach(struct comedi_device
*dev
)
176 printk("comedi%d: dt2817: remove\n", dev
->minor
);
179 release_region(dev
->iobase
, DT2817_SIZE
);