1 /*******************************************************************************
2 comedi/drivers/pci1723.c
4 COMEDI - Linux Control and Measurement Device Interface
5 Copyright (C) 2000 David A. Schleef <ds@schleef.org>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 *******************************************************************************/
24 Description: Advantech PCI-1723
25 Author: yonggang <rsmgnu@gmail.com>, Ian Abbott <abbotti@mev.co.uk>
26 Devices: [Advantech] PCI-1723 (adv_pci1723)
27 Updated: Mon, 14 Apr 2008 15:12:56 +0100
30 Configuration Options:
31 [0] - PCI bus of device (optional)
32 [1] - PCI slot of device (optional)
34 If bus/slot is not specified, the first supported
35 PCI device found will be used.
37 Subdevice 0 is 8-channel AO, 16-bit, range +/- 10 V.
39 Subdevice 1 is 16-channel DIO. The channels are configurable as input or
40 output in 2 groups (0 to 7, 8 to 15). Configuring any channel implicitly
41 configures all channels in the same group.
45 1. Add the two milliamp ranges to the AO subdevice (0 to 20 mA, 4 to 20 mA).
46 2. Read the initial ranges and values of the AO subdevice at start-up instead
47 of reinitializing them.
48 3. Implement calibration.
51 #include "../comedidev.h"
53 #include "comedi_pci.h"
55 #define PCI_VENDOR_ID_ADVANTECH 0x13fe /* Advantech PCI vendor ID */
57 /* hardware types of the cards */
58 #define TYPE_PCI1723 0
60 #define IORANGE_1723 0x2A
62 /* all the registers for the pci1723 board */
63 #define PCI1723_DA(N) ((N)<<1) /* W: D/A register N (0 to 7) */
65 #define PCI1723_SYN_SET 0x12 /* synchronized set register */
66 #define PCI1723_ALL_CHNNELE_SYN_STROBE 0x12
67 /* synchronized status register */
69 #define PCI1723_RANGE_CALIBRATION_MODE 0x14
70 /* range and calibration mode */
71 #define PCI1723_RANGE_CALIBRATION_STATUS 0x14
72 /* range and calibration status */
74 #define PCI1723_CONTROL_CMD_CALIBRATION_FUN 0x16
76 * SADC control command for
77 * calibration function
79 #define PCI1723_STATUS_CMD_CALIBRATION_FUN 0x16
81 * SADC control status for
82 * calibration function
85 #define PCI1723_CALIBRATION_PARA_STROBE 0x18
86 /* Calibration parameter strobe */
88 #define PCI1723_DIGITAL_IO_PORT_SET 0x1A /* Digital I/O port setting */
89 #define PCI1723_DIGITAL_IO_PORT_MODE 0x1A /* Digital I/O port mode */
91 #define PCI1723_WRITE_DIGITAL_OUTPUT_CMD 0x1C
92 /* Write digital output command */
93 #define PCI1723_READ_DIGITAL_INPUT_DATA 0x1C /* Read digital input data */
95 #define PCI1723_WRITE_CAL_CMD 0x1E /* Write calibration command */
96 #define PCI1723_READ_CAL_STATUS 0x1E /* Read calibration status */
98 #define PCI1723_SYN_STROBE 0x20 /* Synchronized strobe */
100 #define PCI1723_RESET_ALL_CHN_STROBE 0x22
101 /* Reset all D/A channels strobe */
103 #define PCI1723_RESET_CAL_CONTROL_STROBE 0x24
105 * Reset the calibration
109 #define PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE 0x26
111 * Change D/A channels output
115 #define PCI1723_SELECT_CALIBRATION 0x28 /* Select the calibration Ref_V */
117 /* static unsigned short pci_list_builded=0; =1 list of card is know */
119 static const struct comedi_lrange range_pci1723
= { 1, {
125 * Board descriptions for pci1723 boards.
127 struct pci1723_board
{
129 int vendor_id
; /* PCI vendor a device ID of card */
133 int n_aochan
; /* num of D/A chans */
134 int n_diochan
; /* num of DIO chans */
135 int ao_maxdata
; /* resolution of D/A */
136 const struct comedi_lrange
*rangelist_ao
; /* rangelist for D/A */
139 static const struct pci1723_board boardtypes
[] = {
142 .vendor_id
= PCI_VENDOR_ID_ADVANTECH
,
144 .iorange
= IORANGE_1723
,
145 .cardtype
= TYPE_PCI1723
,
148 .ao_maxdata
= 0xffff,
149 .rangelist_ao
= &range_pci1723
,
154 * This is used by modprobe to translate PCI IDs to drivers.
155 * Should only be used for PCI and ISA-PnP devices
157 static DEFINE_PCI_DEVICE_TABLE(pci1723_pci_table
) = {
159 PCI_VENDOR_ID_ADVANTECH
, 0x1723, PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0}, {
163 MODULE_DEVICE_TABLE(pci
, pci1723_pci_table
);
166 * The struct comedi_driver structure tells the Comedi core module
167 * which functions to call to configure/deconfigure (attach/detach)
168 * the board, and also about the kernel module that contains
171 static int pci1723_attach(struct comedi_device
*dev
,
172 struct comedi_devconfig
*it
);
173 static int pci1723_detach(struct comedi_device
*dev
);
175 #define n_boardtypes (sizeof(boardtypes)/sizeof(struct pci1723_board))
177 static struct comedi_driver driver_pci1723
= {
178 .driver_name
= "adv_pci1723",
179 .module
= THIS_MODULE
,
180 .attach
= pci1723_attach
,
181 .detach
= pci1723_detach
,
184 /* This structure is for data unique to this hardware driver. */
185 struct pci1723_private
{
186 int valid
; /* card is usable; */
188 struct pci_dev
*pcidev
;
189 unsigned char da_range
[8]; /* D/A output range for each channel */
191 short ao_data
[8]; /* data output buffer */
194 /* The following macro to make it easy to access the private structure. */
195 #define devpriv ((struct pci1723_private *)dev->private)
197 #define this_board boardtypes
200 * The pci1723 card reset;
202 static int pci1723_reset(struct comedi_device
*dev
)
205 DPRINTK("adv_pci1723 EDBG: BGN: pci1723_reset(...)\n");
207 outw(0x01, dev
->iobase
+ PCI1723_SYN_SET
);
208 /* set synchronous output mode */
210 for (i
= 0; i
< 8; i
++) {
211 /* set all outputs to 0V */
212 devpriv
->ao_data
[i
] = 0x8000;
213 outw(devpriv
->ao_data
[i
], dev
->iobase
+ PCI1723_DA(i
));
214 /* set all ranges to +/- 10V */
215 devpriv
->da_range
[i
] = 0;
216 outw(((devpriv
->da_range
[i
] << 4) | i
),
217 PCI1723_RANGE_CALIBRATION_MODE
);
220 outw(0, dev
->iobase
+ PCI1723_CHANGE_CHA_OUTPUT_TYPE_STROBE
);
222 outw(0, dev
->iobase
+ PCI1723_SYN_STROBE
); /* update outputs */
224 /* set asynchronous output mode */
225 outw(0, dev
->iobase
+ PCI1723_SYN_SET
);
227 DPRINTK("adv_pci1723 EDBG: END: pci1723_reset(...)\n");
231 static int pci1723_insn_read_ao(struct comedi_device
*dev
,
232 struct comedi_subdevice
*s
,
233 struct comedi_insn
*insn
, unsigned int *data
)
237 chan
= CR_CHAN(insn
->chanspec
);
238 DPRINTK(" adv_PCI1723 DEBUG: pci1723_insn_read_ao() ----- \n");
239 for (n
= 0; n
< insn
->n
; n
++)
240 data
[n
] = devpriv
->ao_data
[chan
];
248 static int pci1723_ao_write_winsn(struct comedi_device
*dev
,
249 struct comedi_subdevice
*s
,
250 struct comedi_insn
*insn
, unsigned int *data
)
253 chan
= CR_CHAN(insn
->chanspec
);
255 DPRINTK("PCI1723: the pci1723_ao_write_winsn() ------\n");
257 for (n
= 0; n
< insn
->n
; n
++) {
259 devpriv
->ao_data
[chan
] = data
[n
];
260 outw(data
[n
], dev
->iobase
+ PCI1723_DA(chan
));
267 digital i/o config/query
269 static int pci1723_dio_insn_config(struct comedi_device
*dev
,
270 struct comedi_subdevice
*s
,
271 struct comedi_insn
*insn
, unsigned int *data
)
275 unsigned short dio_mode
;
277 mask
= 1 << CR_CHAN(insn
->chanspec
);
284 case INSN_CONFIG_DIO_INPUT
:
287 case INSN_CONFIG_DIO_OUTPUT
:
290 case INSN_CONFIG_DIO_QUERY
:
291 data
[1] = (s
->io_bits
& bits
) ? COMEDI_OUTPUT
: COMEDI_INPUT
;
297 /* update hardware DIO mode */
298 dio_mode
= 0x0000; /* low byte output, high byte output */
299 if ((s
->io_bits
& 0x00FF) == 0)
300 dio_mode
|= 0x0001; /* low byte input */
301 if ((s
->io_bits
& 0xFF00) == 0)
302 dio_mode
|= 0x0002; /* high byte input */
303 outw(dio_mode
, dev
->iobase
+ PCI1723_DIGITAL_IO_PORT_SET
);
308 digital i/o bits read/write
310 static int pci1723_dio_insn_bits(struct comedi_device
*dev
,
311 struct comedi_subdevice
*s
,
312 struct comedi_insn
*insn
, unsigned int *data
)
315 s
->state
&= ~data
[0];
316 s
->state
|= (data
[0] & data
[1]);
317 outw(s
->state
, dev
->iobase
+ PCI1723_WRITE_DIGITAL_OUTPUT_CMD
);
319 data
[1] = inw(dev
->iobase
+ PCI1723_READ_DIGITAL_INPUT_DATA
);
324 * Attach is called by the Comedi core to configure the driver
325 * for a pci1723 board.
327 static int pci1723_attach(struct comedi_device
*dev
,
328 struct comedi_devconfig
*it
)
330 struct comedi_subdevice
*s
;
331 int ret
, subdev
, n_subdevices
;
332 struct pci_dev
*pcidev
;
334 unsigned char pci_bus
, pci_slot
, pci_func
;
335 int opt_bus
, opt_slot
;
338 printk(KERN_ERR
"comedi%d: adv_pci1723: board=%s",
339 dev
->minor
, this_board
->name
);
341 opt_bus
= it
->options
[0];
342 opt_slot
= it
->options
[1];
344 ret
= alloc_private(dev
, sizeof(struct pci1723_private
));
346 printk(" - Allocation failed!\n");
350 /* Look for matching PCI device */
351 errstr
= "not found!";
353 while (NULL
!= (pcidev
=
354 pci_get_device(PCI_VENDOR_ID_ADVANTECH
,
355 this_board
->device_id
, pcidev
))) {
356 /* Found matching vendor/device. */
357 if (opt_bus
|| opt_slot
) {
358 /* Check bus/slot. */
359 if (opt_bus
!= pcidev
->bus
->number
360 || opt_slot
!= PCI_SLOT(pcidev
->devfn
))
361 continue; /* no match */
364 * Look for device that isn't in use.
365 * Enable PCI device and request regions.
367 if (comedi_pci_enable(pcidev
, "adv_pci1723")) {
369 "failed to enable PCI device and request regions!";
376 if (opt_bus
|| opt_slot
) {
377 printk(KERN_ERR
" - Card at b:s %d:%d %s\n",
378 opt_bus
, opt_slot
, errstr
);
380 printk(KERN_ERR
" - Card %s\n", errstr
);
385 pci_bus
= pcidev
->bus
->number
;
386 pci_slot
= PCI_SLOT(pcidev
->devfn
);
387 pci_func
= PCI_FUNC(pcidev
->devfn
);
388 iobase
= pci_resource_start(pcidev
, 2);
390 printk(KERN_ERR
", b:s:f=%d:%d:%d, io=0x%4x",
391 pci_bus
, pci_slot
, pci_func
, iobase
);
393 dev
->iobase
= iobase
;
395 dev
->board_name
= this_board
->name
;
396 devpriv
->pcidev
= pcidev
;
400 if (this_board
->n_aochan
)
402 if (this_board
->n_diochan
)
405 ret
= alloc_subdevices(dev
, n_subdevices
);
407 printk(" - Allocation failed!\n");
413 if (this_board
->n_aochan
) {
414 s
= dev
->subdevices
+ subdev
;
415 dev
->write_subdev
= s
;
416 s
->type
= COMEDI_SUBD_AO
;
417 s
->subdev_flags
= SDF_WRITEABLE
| SDF_GROUND
| SDF_COMMON
;
418 s
->n_chan
= this_board
->n_aochan
;
419 s
->maxdata
= this_board
->ao_maxdata
;
420 s
->len_chanlist
= this_board
->n_aochan
;
421 s
->range_table
= this_board
->rangelist_ao
;
423 s
->insn_write
= pci1723_ao_write_winsn
;
424 s
->insn_read
= pci1723_insn_read_ao
;
426 /* read DIO config */
427 switch (inw(dev
->iobase
+ PCI1723_DIGITAL_IO_PORT_MODE
)
429 case 0x00: /* low byte output, high byte output */
432 case 0x01: /* low byte input, high byte output */
435 case 0x02: /* low byte output, high byte input */
438 case 0x03: /* low byte input, high byte input */
442 /* read DIO port state */
443 s
->state
= inw(dev
->iobase
+ PCI1723_READ_DIGITAL_INPUT_DATA
);
448 if (this_board
->n_diochan
) {
449 s
= dev
->subdevices
+ subdev
;
450 s
->type
= COMEDI_SUBD_DIO
;
452 SDF_READABLE
| SDF_WRITABLE
| SDF_GROUND
| SDF_COMMON
;
453 s
->n_chan
= this_board
->n_diochan
;
455 s
->len_chanlist
= this_board
->n_diochan
;
456 s
->range_table
= &range_digital
;
457 s
->insn_config
= pci1723_dio_insn_config
;
458 s
->insn_bits
= pci1723_dio_insn_bits
;
470 * _detach is called to deconfigure a device. It should deallocate
472 * This function is also called when _attach() fails, so it should be
473 * careful not to release resources that were not necessarily
474 * allocated by _attach(). dev->private and dev->subdevices are
475 * deallocated automatically by the core.
477 static int pci1723_detach(struct comedi_device
*dev
)
479 printk(KERN_ERR
"comedi%d: pci1723: remove\n", dev
->minor
);
485 if (devpriv
->pcidev
) {
487 comedi_pci_disable(devpriv
->pcidev
);
488 pci_dev_put(devpriv
->pcidev
);
496 * A convenient macro that defines init_module() and cleanup_module(),
499 static int __devinit
driver_pci1723_pci_probe(struct pci_dev
*dev
,
500 const struct pci_device_id
*ent
)
502 return comedi_pci_auto_config(dev
, driver_pci1723
.driver_name
);
505 static void __devexit
driver_pci1723_pci_remove(struct pci_dev
*dev
)
507 comedi_pci_auto_unconfig(dev
);
510 static struct pci_driver driver_pci1723_pci_driver
= {
511 .id_table
= pci1723_pci_table
,
512 .probe
= &driver_pci1723_pci_probe
,
513 .remove
= __devexit_p(&driver_pci1723_pci_remove
)
516 static int __init
driver_pci1723_init_module(void)
520 retval
= comedi_driver_register(&driver_pci1723
);
524 driver_pci1723_pci_driver
.name
= (char *)driver_pci1723
.driver_name
;
525 return pci_register_driver(&driver_pci1723_pci_driver
);
528 static void __exit
driver_pci1723_cleanup_module(void)
530 pci_unregister_driver(&driver_pci1723_pci_driver
);
531 comedi_driver_unregister(&driver_pci1723
);
534 module_init(driver_pci1723_init_module
);
535 module_exit(driver_pci1723_cleanup_module
);
537 MODULE_AUTHOR("Comedi http://www.comedi.org");
538 MODULE_DESCRIPTION("Comedi low-level driver");
539 MODULE_LICENSE("GPL");