2 tristate "Data acquisition support (comedi)"
4 depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
6 Enable support a wide range of data acquisition devices
12 bool "Comedi debugging"
14 This is an option for use by developers; most people should
15 say N here. This enables comedi core and driver debugging.
17 config COMEDI_DEFAULT_BUF_SIZE_KB
18 int "Comedi default initial asynchronous buffer size in KiB"
21 This is the default asynchronous buffer size which is used for
22 commands running in the background in kernel space. This
23 defaults to 2048 KiB of memory so that a 16 channel card
24 running at 10 kHz has of 2-4 seconds of buffer.
26 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
27 int "Comedi default maximum asynchronous buffer size in KiB"
30 This is the default maximum asynchronous buffer size which can
31 be requested by a userspace program without root privileges.
32 This is set to 20480 KiB so that a fast I/O card with 16
33 channels running at 100 kHz has 2-4 seconds of buffer.
35 menuconfig COMEDI_MISC_DRIVERS
36 bool "Comedi misc drivers"
38 Enable comedi misc drivers to be built
40 Note that the answer to this question won't directly affect the
41 kernel: saying N will just cause the configurator to skip all
42 the questions about misc non-hardware comedi drivers.
44 if COMEDI_MISC_DRIVERS
46 config COMEDI_KCOMEDILIB
47 tristate "Comedi kcomedilib"
52 tristate "Device bonding support"
53 depends on COMEDI_KCOMEDILIB
55 Enable support for a driver to 'bond' (merge) multiple subdevices
56 from multiple devices together as one.
58 To compile this driver as a module, choose M here: the module will be
62 tristate "Fake waveform generator support"
65 Enable support for the fake waveform generator.
66 This driver is mainly for testing purposes, but can also be used to
67 generate sample waveforms on systems that don't have data acquisition
70 To compile this driver as a module, choose M here: the module will be
74 tristate "Parallel port support"
76 Enable support for the standard parallel port.
77 A cheap and easy way to get a few more digital I/O lines. Steal
78 additional parallel ports from old computers or your neighbors'
81 To compile this driver as a module, choose M here: the module will be
82 called comedi_parport.
84 config COMEDI_SERIAL2002
85 tristate "Driver for serial connected hardware"
87 Enable support for serial connected hardware
89 To compile this driver as a module, choose M here: the module will be
93 tristate "Comedi skeleton driver"
95 Build the Skeleton driver, an example for driver writers
97 To compile this driver as a module, choose M here: the module will be
100 endif # COMEDI_MISC_DRIVERS
102 menuconfig COMEDI_ISA_DRIVERS
103 bool "Comedi ISA and PC/104 drivers"
106 Enable comedi ISA and PC/104 drivers to be built
108 Note that the answer to this question won't directly affect the
109 kernel: saying N will just cause the configurator to skip all
110 the questions about ISA and PC/104 comedi drivers.
112 if COMEDI_ISA_DRIVERS
114 config COMEDI_ACL7225B
115 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
117 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
118 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
120 To compile this driver as a module, choose M here: the module will be
124 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
126 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
128 To compile this driver as a module, choose M here: the module will be
132 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
135 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
136 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
138 To compile this driver as a module, choose M here: the module will be
142 tristate "Advantech PCL-725 and compatible ISA card support"
144 Enable support for Advantech PCL-725 and compatible ISA cards.
146 To compile this driver as a module, choose M here: the module will be
150 tristate "Advantech PCL-726 and compatible ISA card support"
152 Enable support for Advantech PCL-726 and compatible ISA cards.
154 To compile this driver as a module, choose M here: the module will be
158 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
160 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
163 To compile this driver as a module, choose M here: the module will be
167 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
168 depends on VIRT_TO_BUS
170 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
171 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
172 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
174 To compile this driver as a module, choose M here: the module will be
178 tristate "Advantech PCL-814 and PCL-816 ISA card support"
179 depends on VIRT_TO_BUS
181 Enable support for Advantech PCL-814 and PCL-816 ISA cards
183 To compile this driver as a module, choose M here: the module will be
187 tristate "Advantech PCL-718 and PCL-818 ISA card support"
188 depends on VIRT_TO_BUS
190 Enable support for Advantech PCL-818 ISA cards
191 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
193 To compile this driver as a module, choose M here: the module will be
196 config COMEDI_PCM3724
197 tristate "Advantech PCM-3724 PC/104 card support"
200 Enable support for Advantech PCM-3724 PC/104 cards.
202 To compile this driver as a module, choose M here: the module will be
205 config COMEDI_PCM3730
206 tristate "Advantech PCM-3730 and clone PC/104 board support"
208 Enable support for Advantech PCM-3730 and clone PC/104 boards
210 To compile this driver as a module, choose M here: the module will be
213 config COMEDI_AMPLC_DIO200_ISA
214 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
215 select COMEDI_AMPLC_DIO200
217 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
218 PC272E ISA DIO boards
220 To compile this driver as a module, choose M here: the module will be
223 config COMEDI_AMPLC_PC236_ISA
224 tristate "Amplicon PC36AT DIO board support"
225 select COMEDI_AMPLC_PC236
227 Enable support for Amplicon PC36AT ISA DIO board.
229 To compile this driver as a module, choose M here: the module will be
232 config COMEDI_AMPLC_PC263_ISA
233 tristate "Amplicon PC263 relay board support"
234 select COMEDI_AMPLC_PC263
236 Enable support for Amplicon PC263 ISA relay board.
238 To compile this driver as a module, choose M here: the module will be
242 tristate "Analog Devices RTI-800/815 ISA card support"
244 Enable support for Analog Devices RTI-800/815 ISA cards
246 To compile this driver as a module, choose M here: the module will be
250 tristate "Analog Devices RTI-802 ISA card support"
252 Enable support for Analog Devices RTI-802 ISA cards
254 To compile this driver as a module, choose M here: the module will be
257 config COMEDI_DAS16M1
258 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
262 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
264 To compile this driver as a module, choose M here: the module will be
267 config COMEDI_DAS08_ISA
268 tristate "DAS-08 compatible ISA and PC/104 card support"
271 Enable support for Keithley Metrabyte/ComputerBoards DAS08
272 and compatible ISA and PC/104 cards:
273 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
274 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
275 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
277 To compile this driver as a module, choose M here: the module will be
281 tristate "DAS-16 compatible ISA and PC/104 card support"
285 Enable support for Keithley Metrabyte/ComputerBoards DAS16
286 and compatible ISA and PC/104 cards:
287 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
288 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
289 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
290 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
291 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
292 CIO-DAS1602/16, CIO-DAS16/330
294 To compile this driver as a module, choose M here: the module will be
298 tristate "DAS800 and compatible ISA card support"
301 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
302 Keithley Metrabyte DAS-800, DAS-801, DAS-802
303 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
306 To compile this driver as a module, choose M here: the module will be
309 config COMEDI_DAS1800
310 tristate "DAS1800 and compatible ISA card support"
311 depends on VIRT_TO_BUS
314 Enable support for DAS1800 and compatible ISA cards
315 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
316 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
317 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
318 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
321 To compile this driver as a module, choose M here: the module will be
324 config COMEDI_DAS6402
325 tristate "DAS6402 and compatible ISA card support"
327 Enable support for DAS6402 and compatible ISA cards
328 Computerboards, Keithley Metrabyte DAS6402 and compatibles
330 To compile this driver as a module, choose M here: the module will be
334 tristate "Data Translation DT2801 ISA card support"
336 Enable support for Data Translation DT2801 ISA cards
338 To compile this driver as a module, choose M here: the module will be
342 tristate "Data Translation DT2811 ISA card support"
344 Enable support for Data Translation DT2811 ISA cards
346 To compile this driver as a module, choose M here: the module will be
350 tristate "Data Translation DT2814 ISA card support"
352 Enable support for Data Translation DT2814 ISA cards
354 To compile this driver as a module, choose M here: the module will be
358 tristate "Data Translation DT2815 ISA card support"
360 Enable support for Data Translation DT2815 ISA cards
362 To compile this driver as a module, choose M here: the module will be
366 tristate "Data Translation DT2817 ISA card support"
368 Enable support for Data Translation DT2817 ISA cards
370 To compile this driver as a module, choose M here: the module will be
374 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
376 depends on VIRT_TO_BUS
378 Enable support for Data Translation DT2821 series including DT-EZ
379 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
380 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
381 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
383 To compile this driver as a module, choose M here: the module will be
386 config COMEDI_DMM32AT
387 tristate "Diamond Systems MM-32-AT PC/104 board support"
389 Enable support for Diamond Systems MM-32-AT PC/104 boards
391 To compile this driver as a module, choose M here: the module will be
395 tristate "FL512 ISA card support"
397 Enable support for FL512 ISA card
399 To compile this driver as a module, choose M here: the module will be
402 config COMEDI_AIO_AIO12_8
403 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
406 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
408 To compile this driver as a module, choose M here: the module will be
411 config COMEDI_AIO_IIRO_16
412 tristate "I/O Products PC/104 IIRO16 Board support"
414 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
417 To compile this driver as a module, choose M here: the module will be
420 config COMEDI_C6XDIGIO
421 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
423 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
426 To compile this driver as a module, choose M here: the module will be
430 tristate "Micro/sys MPC-624 PC/104 board support"
432 Enable support for Micro/sys MPC-624 PC/104 board
434 To compile this driver as a module, choose M here: the module will be
438 tristate "MicroAxial ADQ12-B data acquisition and control card support"
440 Enable MicroAxial ADQ12-B daq and control card support.
442 To compile this driver as a module, choose M here: the module will be
445 config COMEDI_NI_AT_A2150
446 tristate "NI AT-A2150 ISA card support"
448 depends on VIRT_TO_BUS
450 Enable support for National Instruments AT-A2150 cards
452 To compile this driver as a module, choose M here: the module will be
455 config COMEDI_NI_AT_AO
456 tristate "NI AT-AO-6/10 EISA card support"
458 Enable support for National Instruments AT-AO-6/10 cards
460 To compile this driver as a module, choose M here: the module will be
463 config COMEDI_NI_ATMIO
464 tristate "NI AT-MIO E series ISA-PNP card support"
469 Enable support for National Instruments AT-MIO E series cards
470 National Instruments AT-MIO-16E-1 (ni_atmio),
471 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
472 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
474 To compile this driver as a module, choose M here: the module will be
477 config COMEDI_NI_ATMIO16D
478 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
482 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
484 To compile this driver as a module, choose M here: the module will be
488 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
490 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
492 To compile this driver as a module, choose M here: the module will be
495 config COMEDI_PCMDA12
496 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
498 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
499 Note that the board is not ISA-PNP capable and thus needs the I/O
500 port comedi_config parameter.
502 To compile this driver as a module, choose M here: the module will be
506 tristate "Winsystems PCM-MIO PC/104 board support"
508 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
510 To compile this driver as a module, choose M here: the module will be
514 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
516 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
518 To compile this driver as a module, choose M here: the module will be
521 config COMEDI_MULTIQ3
522 tristate "Quanser Consulting MultiQ-3 ISA card support"
524 Enable support for Quanser Consulting MultiQ-3 ISA cards
526 To compile this driver as a module, choose M here: the module will be
530 tristate "Generic driver for very simple devices"
532 Enable generic support for very simple / POC (Piece of Crap) boards,
533 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
536 To compile this driver as a module, choose M here: the module will be
539 endif # COMEDI_ISA_DRIVERS
541 menuconfig COMEDI_PCI_DRIVERS
542 bool "Comedi PCI drivers"
545 Enable comedi PCI drivers to be built
547 Note that the answer to this question won't directly affect the
548 kernel: saying N will just cause the configurator to skip all
549 the questions about PCI comedi drivers.
551 if COMEDI_PCI_DRIVERS
553 config COMEDI_8255_PCI
554 tristate "Generic PCI based 8255 digital i/o board support"
557 Enable support for PCI based 8255 digital i/o boards. This driver
558 provides a PCI wrapper around the generic 8255 driver.
561 ADlink - PCI-7224, PCI-7248, and PCI-7296
562 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
564 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
565 PCI-6503B, PCI-6503X, and PXI-6503
567 To compile this driver as a module, choose M here: the module will
570 config COMEDI_ADDI_APCI_035
571 tristate "ADDI-DATA APCI_035 support"
573 Enable support for ADDI-DATA APCI_035 cards
575 To compile this driver as a module, choose M here: the module will be
576 called addi_apci_035.
578 config COMEDI_ADDI_APCI_1032
579 tristate "ADDI-DATA APCI_1032 support"
581 Enable support for ADDI-DATA APCI_1032 cards
583 To compile this driver as a module, choose M here: the module will be
584 called addi_apci_1032.
586 config COMEDI_ADDI_APCI_1500
587 tristate "ADDI-DATA APCI_1500 support"
589 Enable support for ADDI-DATA APCI_1500 cards
591 To compile this driver as a module, choose M here: the module will be
592 called addi_apci_1500.
594 config COMEDI_ADDI_APCI_1516
595 tristate "ADDI-DATA APCI-1016/1516/2016 support"
597 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
598 These are 16 channel, optically isolated, digital I/O boards. The 1516
599 and 2016 boards also have a watchdog for resetting the outputs to "0".
601 To compile this driver as a module, choose M here: the module will be
602 called addi_apci_1516.
604 config COMEDI_ADDI_APCI_1564
605 tristate "ADDI-DATA APCI_1564 support"
607 Enable support for ADDI-DATA APCI_1564 cards
609 To compile this driver as a module, choose M here: the module will be
610 called addi_apci_1564.
612 config COMEDI_ADDI_APCI_16XX
613 tristate "ADDI-DATA APCI_16xx support"
615 Enable support for ADDI-DATA APCI_16xx cards
617 To compile this driver as a module, choose M here: the module will be
618 called addi_apci_16xx.
620 config COMEDI_ADDI_APCI_2032
621 tristate "ADDI-DATA APCI_2032 support"
623 Enable support for ADDI-DATA APCI_2032 cards
625 To compile this driver as a module, choose M here: the module will be
626 called addi_apci_2032.
628 config COMEDI_ADDI_APCI_2200
629 tristate "ADDI-DATA APCI_2200 support"
631 Enable support for ADDI-DATA APCI_2200 cards
633 To compile this driver as a module, choose M here: the module will be
634 called addi_apci_2200.
636 config COMEDI_ADDI_APCI_3120
637 tristate "ADDI-DATA APCI_3120/3001 support"
638 depends on VIRT_TO_BUS
641 Enable support for ADDI-DATA APCI_3120/3001 cards
643 To compile this driver as a module, choose M here: the module will be
644 called addi_apci_3120.
646 config COMEDI_ADDI_APCI_3501
647 tristate "ADDI-DATA APCI_3501 support"
649 Enable support for ADDI-DATA APCI_3501 cards
651 To compile this driver as a module, choose M here: the module will be
652 called addi_apci_3501.
654 config COMEDI_ADDI_APCI_3XXX
655 tristate "ADDI-DATA APCI_3xxx support"
657 Enable support for ADDI-DATA APCI_3xxx cards
659 To compile this driver as a module, choose M here: the module will be
660 called addi_apci_3xxx.
662 config COMEDI_ADL_PCI6208
663 tristate "ADLink PCI-6208A support"
665 Enable support for ADLink PCI-6208A cards
667 To compile this driver as a module, choose M here: the module will be
670 config COMEDI_ADL_PCI7X3X
671 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
673 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
674 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
675 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
676 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
678 To compile this driver as a module, choose M here: the module will be
681 config COMEDI_ADL_PCI8164
682 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
684 Enable support for ADlink PCI-8164 4 Axes Motion Control board
686 To compile this driver as a module, choose M here: the module will be
689 config COMEDI_ADL_PCI9111
690 tristate "ADLink PCI-9111HR support"
693 Enable support for ADlink PCI9111 cards
695 To compile this driver as a module, choose M here: the module will be
698 config COMEDI_ADL_PCI9118
699 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
701 depends on VIRT_TO_BUS
703 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
705 To compile this driver as a module, choose M here: the module will be
708 config COMEDI_ADV_PCI1710
709 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
711 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
712 PCI-1713, PCI-1720 and PCI-1731
714 To compile this driver as a module, choose M here: the module will be
717 config COMEDI_ADV_PCI1723
718 tristate "Advantech PCI-1723 support"
720 Enable support for Advantech PCI-1723 cards
722 To compile this driver as a module, choose M here: the module will be
725 config COMEDI_ADV_PCI_DIO
726 tristate "Advantech PCI DIO card support"
729 Enable support for Advantech PCI DIO cards
730 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
731 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
732 PCI-1760 and PCI-1762
734 To compile this driver as a module, choose M here: the module will be
737 config COMEDI_AMPLC_DIO200_PCI
738 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
739 select COMEDI_AMPLC_DIO200
741 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
742 and PCIe296 DIO boards.
744 To compile this driver as a module, choose M here: the module will be
747 config COMEDI_AMPLC_PC236_PCI
748 tristate "Amplicon PCI236 DIO board support"
749 select COMEDI_AMPLC_PC236
751 Enable support for Amplicon PCI236 DIO board.
753 To compile this driver as a module, choose M here: the module will be
756 config COMEDI_AMPLC_PC263_PCI
757 tristate "Amplicon PCI263 relay board support"
758 select COMEDI_AMPLC_PC263
760 Enable support for Amplicon PCI263 relay board.
762 To compile this driver as a module, choose M here: the module will be
765 config COMEDI_AMPLC_PCI224
766 tristate "Amplicon PCI224 and PCI234 support"
769 Enable support for Amplicon PCI224 and PCI234 AO boards
771 To compile this driver as a module, choose M here: the module will be
774 config COMEDI_AMPLC_PCI230
775 tristate "Amplicon PCI230 and PCI260 support"
778 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
781 To compile this driver as a module, choose M here: the module will be
784 config COMEDI_CONTEC_PCI_DIO
785 tristate "Contec PIO1616L digital I/O board support"
787 Enable support for the Contec PIO1616L digital I/O board
789 To compile this driver as a module, choose M here: the module will be
790 called contec_pci_dio.
792 config COMEDI_DAS08_PCI
793 tristate "DAS-08 PCI support"
796 Enable support for PCI DAS-08 cards.
798 To compile this driver as a module, choose M here: the module will be
802 tristate "Data Translation DT3000 series support"
804 Enable support for Data Translation DT3000 series
805 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
808 To compile this driver as a module, choose M here: the module will be
811 config COMEDI_DYNA_PCI10XX
812 tristate "Dynalog PCI DAQ series support"
814 Enable support for Dynalog PCI DAQ series
817 To compile this driver as a module, choose M here: the module will be
820 config COMEDI_UNIOXX5
821 tristate "Fastwel UNIOxx-5 analog and digital io board support"
823 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
825 To compile this driver as a module, choose M here: the module will be
828 config COMEDI_GSC_HPDI
829 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
832 Enable support for General Standards Corporation high speed parallel
833 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
834 Only receive mode works, transmit not supported.
836 To compile this driver as a module, choose M here: the module will be
839 config COMEDI_ICP_MULTI
840 tristate "Inova ICP_MULTI support"
842 Enable support for Inova ICP_MULTI card
844 To compile this driver as a module, choose M here: the module will be
847 config COMEDI_II_PCI20KC
848 tristate "Intelligent Instruments PCI-20001C carrier support"
850 Enable support for Intelligent Instruments PCI-20001C carrier
851 PCI-20001, PCI-20006 and PCI-20341
853 To compile this driver as a module, choose M here: the module will be
856 config COMEDI_DAQBOARD2000
857 tristate "IOtech DAQboard/2000 support"
860 Enable support for the IOtech DAQboard/2000
862 To compile this driver as a module, choose M here: the module will be
865 config COMEDI_JR3_PCI
866 tristate "JR3/PCI force sensor board support"
868 Enable support for JR3/PCI force sensor boards
870 To compile this driver as a module, choose M here: the module will be
873 config COMEDI_KE_COUNTER
874 tristate "Kolter-Electronic PCI Counter 1 card support"
876 Enable support for Kolter-Electronic PCI Counter 1 cards
878 To compile this driver as a module, choose M here: the module will be
881 config COMEDI_CB_PCIDAS64
882 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
886 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
887 60xx, and 4020 series with the PLX 9080 PCI controller
889 To compile this driver as a module, choose M here: the module will be
892 config COMEDI_CB_PCIDAS
893 tristate "MeasurementComputing PCI-DAS support"
897 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
898 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
899 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
902 To compile this driver as a module, choose M here: the module will be
905 config COMEDI_CB_PCIDDA
906 tristate "MeasurementComputing PCI-DDA series support"
909 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
910 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
911 PCI-DDA04/16 and PCI-DDA02/16
913 To compile this driver as a module, choose M here: the module will be
916 config COMEDI_CB_PCIMDAS
917 tristate "MeasurementComputing PCIM-DAS1602/16 support"
920 Enable support for ComputerBoards/MeasurementComputing PCI Migration
921 series PCIM-DAS1602/16
923 To compile this driver as a module, choose M here: the module will be
926 config COMEDI_CB_PCIMDDA
927 tristate "MeasurementComputing PCIM-DDA06-16 support"
930 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
932 To compile this driver as a module, choose M here: the module will be
936 tristate "Meilhaus ME-4000 support"
938 Enable support for Meilhaus PCI data acquisition cards
939 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
941 To compile this driver as a module, choose M here: the module will be
945 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
947 Enable support for Meilhaus PCI data acquisition cards
948 ME-2000i, ME-2600i and ME-3000vm1
950 To compile this driver as a module, choose M here: the module will be
953 config COMEDI_NI_6527
954 tristate "NI 6527 support"
957 Enable support for the National Instruments 6527 PCI card
959 To compile this driver as a module, choose M here: the module will be
962 config COMEDI_NI_65XX
963 tristate "NI 65xx static dio PCI card support"
966 Enable support for National Instruments 65xx static dio boards.
967 Supported devices: National Instruments PCI-6509 (ni_65xx),
968 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
969 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
970 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
972 To compile this driver as a module, choose M here: the module will be
975 config COMEDI_NI_660X
976 tristate "NI 660x counter/timer PCI card support"
977 select COMEDI_NI_TIOCMD
979 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
980 PXI-6602 and PXI-6608.
982 To compile this driver as a module, choose M here: the module will be
985 config COMEDI_NI_670X
986 tristate "NI 670x PCI card support"
989 Enable support for National Instruments PCI-6703 and PCI-6704
991 To compile this driver as a module, choose M here: the module will be
994 config COMEDI_NI_LABPC
995 tristate "NI Lab-PC and compatibles ISA and PCI support"
999 depends on VIRT_TO_BUS
1001 Enable support for National Instruments Lab-PC and compatibles
1002 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1003 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1004 not yet been added to the driver.
1006 To compile this driver as a module, choose M here: the module will be
1009 config COMEDI_NI_PCIDIO
1010 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1014 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1015 PCI-6533 and PCI-6534
1017 To compile this driver as a module, choose M here: the module will be
1020 config COMEDI_NI_PCIMIO
1021 tristate "NI PCI-MIO-E series and M series support"
1022 select COMEDI_NI_TIOCMD
1026 Enable support for National Instruments PCI-MIO-E series and M series
1027 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1028 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1029 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1030 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1031 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1032 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1033 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1034 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1035 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1037 To compile this driver as a module, choose M here: the module will be
1040 config COMEDI_RTD520
1041 tristate "Real Time Devices PCI4520/DM7520 support"
1043 Enable support for Real Time Devices PCI4520/DM7520
1045 To compile this driver as a module, choose M here: the module will be
1049 tristate "Sensoray s526 support"
1051 Enable support for Sensoray s526
1053 To compile this driver as a module, choose M here: the module will be
1057 tristate "Sensoray 626 support"
1060 Enable support for Sensoray 626
1062 To compile this driver as a module, choose M here: the module will be
1065 config COMEDI_SSV_DNP
1066 tristate "SSV Embedded Systems DIL/Net-PC support"
1068 Enable support for SSV Embedded Systems DIL/Net-PC
1070 To compile this driver as a module, choose M here: the module will be
1076 config COMEDI_NI_TIOCMD
1078 select COMEDI_NI_TIO
1081 endif # COMEDI_PCI_DRIVERS
1083 menuconfig COMEDI_PCMCIA_DRIVERS
1084 bool "Comedi PCMCIA drivers"
1087 Enable comedi PCMCIA and PCCARD drivers to be built
1089 Note that the answer to this question won't directly affect the
1090 kernel: saying N will just cause the configurator to skip all
1091 the questions about PCMCIA comedi drivers.
1093 if COMEDI_PCMCIA_DRIVERS
1095 config COMEDI_CB_DAS16_CS
1096 tristate "CB DAS16 series PCMCIA support"
1098 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1099 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1101 To compile this driver as a module, choose M here: the module will be
1104 config COMEDI_DAS08_CS
1105 tristate "CB DAS08 PCMCIA support"
1108 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1111 To compile this driver as a module, choose M here: the module will be
1114 config COMEDI_NI_DAQ_700_CS
1115 tristate "NI DAQCard-700 PCMCIA support"
1117 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1119 To compile this driver as a module, choose M here: the module will be
1122 config COMEDI_NI_DAQ_DIO24_CS
1123 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1126 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1128 To compile this driver as a module, choose M here: the module will be
1129 called ni_daq_dio24.
1131 config COMEDI_NI_LABPC_CS
1132 tristate "NI DAQCard-1200 PCMCIA support"
1133 depends on COMEDI_NI_LABPC
1135 Enable support for the National Instruments PCMCIA DAQCard-1200
1137 To compile this driver as a module, choose M here: the module will be
1140 config COMEDI_NI_MIO_CS
1141 tristate "NI DAQCard E series PCMCIA support"
1142 select COMEDI_NI_TIO
1146 Enable support for the National Instruments PCMCIA DAQCard E series
1147 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1150 To compile this driver as a module, choose M here: the module will be
1153 config COMEDI_QUATECH_DAQP_CS
1154 tristate "Quatech DAQP PCMCIA data capture card support"
1156 Enable support for the Quatech DAQP PCMCIA data capture cards
1157 DAQP-208 and DAQP-308
1159 To compile this driver as a module, choose M here: the module will be
1160 called quatech_daqp_cs.
1162 endif # COMEDI_PCMCIA_DRIVERS
1164 menuconfig COMEDI_USB_DRIVERS
1165 bool "Comedi USB drivers"
1168 Enable comedi USB drivers to be built
1170 Note that the answer to this question won't directly affect the
1171 kernel: saying N will just cause the configurator to skip all
1172 the questions about USB comedi drivers.
1174 if COMEDI_USB_DRIVERS
1176 config COMEDI_DT9812
1177 tristate "DataTranslation DT9812 USB module support"
1179 Enable support for the Data Translation DT9812 USB module
1181 To compile this driver as a module, choose M here: the module will be
1184 config COMEDI_USBDUX
1185 tristate "ITL USB-DUX-D support"
1187 Enable support for the Incite Technology Ltd USB-DUX-D Board
1189 To compile this driver as a module, choose M here: the module will be
1192 config COMEDI_USBDUXFAST
1193 tristate "ITL USB-DUXfast support"
1196 Enable support for the Incite Technology Ltd USB-DUXfast Board
1198 To compile this driver as a module, choose M here: the module will be
1201 config COMEDI_USBDUXSIGMA
1202 tristate "ITL USB-DUXsigma support"
1205 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1207 To compile this driver as a module, choose M here: the module will be
1210 config COMEDI_VMK80XX
1211 tristate "Velleman VM110/VM140 USB Board support"
1213 Build the Velleman USB Board Low-Level Driver supporting the
1214 K8055/K8061 aka VM110/VM140 devices
1216 To compile this driver as a module, choose M here: the module will be
1219 endif # COMEDI_USB_DRIVERS
1222 tristate "Generic 8255 support"
1224 Enable generic 8255 support.
1226 You should enable compilation this driver if you plan to use a board
1227 that has an 8255 chip. For multifunction boards, the main driver will
1228 configure the 8255 subdevice automatically.
1230 Note that most PCI based 8255 boards use the 8255_pci driver as a
1231 wrapper around this driver.
1233 To compile this driver as a module, choose M here: the module will be
1239 config COMEDI_AMPLC_DIO200
1242 config COMEDI_AMPLC_PC236
1246 config COMEDI_AMPLC_PC263
1253 config COMEDI_NI_TIO