drivers/staging/comedi/Kconfig

   1 config COMEDI
   2         tristate "Data acquisition support (comedi)"
   3         depends on m
   4         depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
   5         ---help---
   6           Enable support a wide range of data acquisition devices
   7           for Linux.
   8
   9 if COMEDI
  10
  11 config COMEDI_DEBUG
  12         bool "Comedi debugging"
  13         ---help---
  14           This is an option for use by developers; most people should
  15           say N here. This enables comedi core and driver debugging.
  16
  17 config COMEDI_DEFAULT_BUF_SIZE_KB
  18         int "Comedi default initial asynchronous buffer size in KiB"
  19         default "2048"
  20         ---help---
  21           This is the default asynchronous buffer size which is used for
  22           commands running in the background in kernel space.  This
  23           defaults to 2048 KiB of memory so that a 16 channel card
  24           running at 10 kHz has of 2-4 seconds of buffer.
  25
  26 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
  27         int "Comedi default maximum asynchronous buffer size in KiB"
  28         default "20480"
  29         ---help---
  30           This is the default maximum asynchronous buffer size which can
  31           be requested by a userspace program without root privileges.
  32           This is set to 20480 KiB so that a fast I/O card with 16
  33           channels running at 100 kHz has 2-4 seconds of buffer.
  34
  35 menuconfig COMEDI_MISC_DRIVERS
  36         bool "Comedi misc drivers"
  37         ---help---
  38           Enable comedi misc drivers to be built
  39
  40           Note that the answer to this question won't directly affect the
  41           kernel: saying N will just cause the configurator to skip all
  42           the questions about misc non-hardware comedi drivers.
  43
  44 if COMEDI_MISC_DRIVERS
  45
  46 config COMEDI_KCOMEDILIB
  47         tristate "Comedi kcomedilib"
  48         ---help---
  49           Build the kcomedilib
  50
  51 config COMEDI_BOND
  52         tristate "Device bonding support"
  53         depends on COMEDI_KCOMEDILIB
  54         ---help---
  55           Enable support for a driver to 'bond' (merge) multiple subdevices
  56           from multiple devices together as one.
  57
  58           To compile this driver as a module, choose M here: the module will be
  59           called comedi_bond.
  60
  61 config COMEDI_TEST
  62         tristate "Fake waveform generator support"
  63         select COMEDI_FC
  64         ---help---
  65           Enable support for the fake waveform generator.
  66           This driver is mainly for testing purposes, but can also be used to
  67           generate sample waveforms on systems that don't have data acquisition
  68           hardware.
  69
  70           To compile this driver as a module, choose M here: the module will be
  71           called comedi_test.
  72
  73 config COMEDI_PARPORT
  74         tristate "Parallel port support"
  75         ---help---
  76           Enable support for the standard parallel port.
  77           A cheap and easy way to get a few more digital I/O lines. Steal
  78           additional parallel ports from old computers or your neighbors'
  79           computers.
  80
  81           To compile this driver as a module, choose M here: the module will be
  82           called comedi_parport.
  83
  84 config COMEDI_SERIAL2002
  85         tristate "Driver for serial connected hardware"
  86         ---help---
  87           Enable support for serial connected hardware
  88
  89           To compile this driver as a module, choose M here: the module will be
  90           called serial2002.
  91
  92 config COMEDI_SKEL
  93         tristate "Comedi skeleton driver"
  94         ---help---
  95           Build the Skeleton driver, an example for driver writers
  96
  97           To compile this driver as a module, choose M here: the module will be
  98           called skel.
  99
 100 endif # COMEDI_MISC_DRIVERS
 101
 102 menuconfig COMEDI_ISA_DRIVERS
 103         bool "Comedi ISA and PC/104 drivers"
 104         depends on ISA
 105         ---help---
 106           Enable comedi ISA and PC/104 drivers to be built
 107
 108           Note that the answer to this question won't directly affect the
 109           kernel: saying N will just cause the configurator to skip all
 110           the questions about ISA and PC/104 comedi drivers.
 111
 112 if COMEDI_ISA_DRIVERS
 113
 114 config COMEDI_ACL7225B
 115         tristate "ADlink NuDAQ ACL-7225b and compatibles support"
 116         ---help---
 117           Enable support for ADlink NuDAQ ACL-7225b and compatibles,
 118           ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
 119
 120           To compile this driver as a module, choose M here: the module will be
 121           called acl7225b.
 122
 123 config COMEDI_PCL711
 124         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
 125         ---help---
 126           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
 127
 128           To compile this driver as a module, choose M here: the module will be
 129           called pcl711.
 130
 131 config COMEDI_PCL724
 132         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
 133         select COMEDI_8255
 134         ---help---
 135           Enable support for Advantech PCL-724, PCL-722, PCL-731 and
 136           ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
 137
 138           To compile this driver as a module, choose M here: the module will be
 139           called pcl724.
 140
 141 config COMEDI_PCL725
 142         tristate "Advantech PCL-725 and compatible ISA card support"
 143         ---help---
 144           Enable support for Advantech PCL-725 and compatible ISA cards.
 145
 146           To compile this driver as a module, choose M here: the module will be
 147           called pcl725.
 148
 149 config COMEDI_PCL726
 150         tristate "Advantech PCL-726 and compatible ISA card support"
 151         ---help---
 152           Enable support for Advantech PCL-726 and compatible ISA cards.
 153
 154           To compile this driver as a module, choose M here: the module will be
 155           called pcl726.
 156
 157 config COMEDI_PCL730
 158         tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
 159         ---help---
 160           Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
 161           ACL-7130 ISA cards
 162
 163           To compile this driver as a module, choose M here: the module will be
 164           called pcl730.
 165
 166 config COMEDI_PCL812
 167         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
 168         depends on VIRT_TO_BUS
 169         ---help---
 170           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
 171           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
 172           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
 173
 174           To compile this driver as a module, choose M here: the module will be
 175           called pcl812.
 176
 177 config COMEDI_PCL816
 178         tristate "Advantech PCL-814 and PCL-816 ISA card support"
 179         depends on VIRT_TO_BUS
 180         ---help---
 181           Enable support for Advantech PCL-814 and PCL-816 ISA cards
 182
 183           To compile this driver as a module, choose M here: the module will be
 184           called pcl816.
 185
 186 config COMEDI_PCL818
 187         tristate "Advantech PCL-718 and PCL-818 ISA card support"
 188         depends on VIRT_TO_BUS
 189         ---help---
 190           Enable support for Advantech PCL-818 ISA cards
 191           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
 192
 193           To compile this driver as a module, choose M here: the module will be
 194           called pcl818.
 195
 196 config COMEDI_PCM3724
 197         tristate "Advantech PCM-3724 PC/104 card support"
 198         select COMEDI_8255
 199         ---help---
 200           Enable support for Advantech PCM-3724 PC/104 cards.
 201
 202           To compile this driver as a module, choose M here: the module will be
 203           called pcm3724.
 204
 205 config COMEDI_PCM3730
 206         tristate "Advantech PCM-3730 and clone PC/104 board support"
 207         ---help---
 208           Enable support for Advantech PCM-3730 and clone PC/104 boards
 209
 210           To compile this driver as a module, choose M here: the module will be
 211           called pcm3730.
 212
 213 config COMEDI_AMPLC_DIO200_ISA
 214         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
 215         select COMEDI_AMPLC_DIO200
 216         ---help---
 217           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
 218           PC272E ISA DIO boards
 219
 220           To compile this driver as a module, choose M here: the module will be
 221           called amplc_dio200.
 222
 223 config COMEDI_AMPLC_PC236_ISA
 224         tristate "Amplicon PC36AT DIO board support"
 225         select COMEDI_AMPLC_PC236
 226         ---help---
 227           Enable support for Amplicon PC36AT ISA DIO board.
 228
 229           To compile this driver as a module, choose M here: the module will be
 230           called amplc_pc236.
 231
 232 config COMEDI_AMPLC_PC263_ISA
 233         tristate "Amplicon PC263 relay board support"
 234         select COMEDI_AMPLC_PC263
 235         ---help---
 236           Enable support for Amplicon PC263 ISA relay board.
 237
 238           To compile this driver as a module, choose M here: the module will be
 239           called amplc_pc263.
 240
 241 config COMEDI_RTI800
 242         tristate "Analog Devices RTI-800/815 ISA card support"
 243         ---help---
 244           Enable support for Analog Devices RTI-800/815 ISA cards
 245
 246           To compile this driver as a module, choose M here: the module will be
 247           called rti800.
 248
 249 config COMEDI_RTI802
 250         tristate "Analog Devices RTI-802 ISA card support"
 251         ---help---
 252           Enable support for Analog Devices RTI-802 ISA cards
 253
 254           To compile this driver as a module, choose M here: the module will be
 255           called rti802.
 256
 257 config COMEDI_DAS16M1
 258         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
 259         select COMEDI_8255
 260         select COMEDI_FC
 261         ---help---
 262           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
 263
 264           To compile this driver as a module, choose M here: the module will be
 265           called das16m1.
 266
 267 config COMEDI_DAS08_ISA
 268         tristate "DAS-08 compatible ISA and PC/104 card support"
 269         select COMEDI_DAS08
 270         ---help---
 271           Enable support for Keithley Metrabyte/ComputerBoards DAS08
 272           and compatible ISA and PC/104 cards:
 273           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
 274           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
 275           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
 276
 277           To compile this driver as a module, choose M here: the module will be
 278           called das08.
 279
 280 config COMEDI_DAS16
 281         tristate "DAS-16 compatible ISA and PC/104 card support"
 282         select COMEDI_8255
 283         select COMEDI_FC
 284         ---help---
 285           Enable support for Keithley Metrabyte/ComputerBoards DAS16
 286           and compatible ISA and PC/104 cards:
 287           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
 288           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
 289           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
 290           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
 291           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
 292           CIO-DAS1602/16, CIO-DAS16/330
 293
 294           To compile this driver as a module, choose M here: the module will be
 295           called das16.
 296
 297 config COMEDI_DAS800
 298         tristate "DAS800 and compatible ISA card support"
 299         select COMEDI_FC
 300         ---help---
 301           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
 302           Keithley Metrabyte DAS-800, DAS-801, DAS-802
 303           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
 304           CIO-DAS802/16
 305
 306           To compile this driver as a module, choose M here: the module will be
 307           called das800.
 308
 309 config COMEDI_DAS1800
 310         tristate "DAS1800 and compatible ISA card support"
 311         depends on VIRT_TO_BUS
 312         select COMEDI_FC
 313         ---help---
 314           Enable support for DAS1800 and compatible ISA cards
 315           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
 316           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
 317           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
 318           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
 319           DAS-1802AO
 320
 321           To compile this driver as a module, choose M here: the module will be
 322           called das1800.
 323
 324 config COMEDI_DAS6402
 325         tristate "DAS6402 and compatible ISA card support"
 326         ---help---
 327           Enable support for DAS6402 and compatible ISA cards
 328           Computerboards, Keithley Metrabyte DAS6402 and compatibles
 329
 330           To compile this driver as a module, choose M here: the module will be
 331           called das6402.
 332
 333 config COMEDI_DT2801
 334         tristate "Data Translation DT2801 ISA card support"
 335         ---help---
 336           Enable support for Data Translation DT2801 ISA cards
 337
 338           To compile this driver as a module, choose M here: the module will be
 339           called dt2801.
 340
 341 config COMEDI_DT2811
 342         tristate "Data Translation DT2811 ISA card support"
 343         ---help---
 344           Enable support for Data Translation DT2811 ISA cards
 345
 346           To compile this driver as a module, choose M here: the module will be
 347           called dt2811.
 348
 349 config COMEDI_DT2814
 350         tristate "Data Translation DT2814 ISA card support"
 351         ---help---
 352           Enable support for Data Translation DT2814 ISA cards
 353
 354           To compile this driver as a module, choose M here: the module will be
 355           called dt2814.
 356
 357 config COMEDI_DT2815
 358         tristate "Data Translation DT2815 ISA card support"
 359         ---help---
 360           Enable support for Data Translation DT2815 ISA cards
 361
 362           To compile this driver as a module, choose M here: the module will be
 363           called dt2815.
 364
 365 config COMEDI_DT2817
 366         tristate "Data Translation DT2817 ISA card support"
 367         ---help---
 368           Enable support for Data Translation DT2817 ISA cards
 369
 370           To compile this driver as a module, choose M here: the module will be
 371           called dt2817.
 372
 373 config COMEDI_DT282X
 374         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
 375         select COMEDI_FC
 376         depends on VIRT_TO_BUS
 377         ---help---
 378           Enable support for Data Translation DT2821 series including DT-EZ
 379           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
 380           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
 381           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
 382
 383           To compile this driver as a module, choose M here: the module will be
 384           called dt282x.
 385
 386 config COMEDI_DMM32AT
 387         tristate "Diamond Systems MM-32-AT PC/104 board support"
 388         ---help---
 389           Enable support for Diamond Systems MM-32-AT PC/104 boards
 390
 391           To compile this driver as a module, choose M here: the module will be
 392           called dmm32at.
 393
 394 config COMEDI_FL512
 395         tristate "FL512 ISA card support"
 396         ---help---
 397           Enable support for FL512 ISA card
 398
 399           To compile this driver as a module, choose M here: the module will be
 400           called fl512.
 401
 402 config COMEDI_AIO_AIO12_8
 403         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
 404         select COMEDI_8255
 405         ---help---
 406           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
 407
 408           To compile this driver as a module, choose M here: the module will be
 409           called aio_aio12_8.
 410
 411 config COMEDI_AIO_IIRO_16
 412         tristate "I/O Products PC/104 IIRO16 Board support"
 413         ---help---
 414           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
 415           Input Board
 416
 417           To compile this driver as a module, choose M here: the module will be
 418           called aio_iiro_16.
 419
 420 config COMEDI_C6XDIGIO
 421         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
 422         ---help---
 423           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
 424           card
 425
 426           To compile this driver as a module, choose M here: the module will be
 427           called c6xdigio.
 428
 429 config COMEDI_MPC624
 430         tristate "Micro/sys MPC-624 PC/104 board support"
 431         ---help---
 432           Enable support for Micro/sys MPC-624 PC/104 board
 433
 434           To compile this driver as a module, choose M here: the module will be
 435           called mpc624.
 436
 437 config COMEDI_ADQ12B
 438         tristate "MicroAxial ADQ12-B data acquisition and control card support"
 439         ---help---
 440           Enable MicroAxial ADQ12-B daq and control card support.
 441
 442           To compile this driver as a module, choose M here: the module will be
 443           called adq12b.
 444
 445 config COMEDI_NI_AT_A2150
 446         tristate "NI AT-A2150 ISA card support"
 447         select COMEDI_FC
 448         depends on VIRT_TO_BUS
 449         ---help---
 450           Enable support for National Instruments AT-A2150 cards
 451
 452           To compile this driver as a module, choose M here: the module will be
 453           called ni_at_a2150.
 454
 455 config COMEDI_NI_AT_AO
 456         tristate "NI AT-AO-6/10 EISA card support"
 457         ---help---
 458           Enable support for National Instruments AT-AO-6/10 cards
 459
 460           To compile this driver as a module, choose M here: the module will be
 461           called ni_at_ao.
 462
 463 config COMEDI_NI_ATMIO
 464         tristate "NI AT-MIO E series ISA-PNP card support"
 465         depends on ISAPNP
 466         select COMEDI_8255
 467         select COMEDI_NI_TIO
 468         ---help---
 469           Enable support for National Instruments AT-MIO E series cards
 470           National Instruments AT-MIO-16E-1 (ni_atmio),
 471           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
 472           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
 473
 474           To compile this driver as a module, choose M here: the module will be
 475           called ni_atmio.
 476
 477 config COMEDI_NI_ATMIO16D
 478         tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
 479         depends on ISAPNP
 480         select COMEDI_8255
 481         ---help---
 482           Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
 483
 484           To compile this driver as a module, choose M here: the module will be
 485           called ni_atmio16d.
 486
 487 config COMEDI_PCMAD
 488         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
 489         ---help---
 490           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
 491
 492           To compile this driver as a module, choose M here: the module will be
 493           called pcmad.
 494
 495 config COMEDI_PCMDA12
 496         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
 497         ---help---
 498           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
 499           Note that the board is not ISA-PNP capable and thus needs the I/O
 500           port comedi_config parameter.
 501
 502           To compile this driver as a module, choose M here: the module will be
 503           called pcmda12.
 504
 505 config COMEDI_PCMMIO
 506         tristate "Winsystems PCM-MIO PC/104 board support"
 507         ---help---
 508           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
 509
 510           To compile this driver as a module, choose M here: the module will be
 511           called pcmmio.
 512
 513 config COMEDI_PCMUIO
 514         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
 515         ---help---
 516           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
 517
 518           To compile this driver as a module, choose M here: the module will be
 519           called pcmuio.
 520
 521 config COMEDI_MULTIQ3
 522         tristate "Quanser Consulting MultiQ-3 ISA card support"
 523         ---help---
 524           Enable support for Quanser Consulting MultiQ-3 ISA cards
 525
 526           To compile this driver as a module, choose M here: the module will be
 527           called multiq3.
 528
 529 config COMEDI_POC
 530         tristate "Generic driver for very simple devices"
 531         ---help---
 532           Enable generic support for very simple / POC (Piece of Crap) boards,
 533           Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
 534           PCL-734 (pcl734)
 535
 536           To compile this driver as a module, choose M here: the module will be
 537           called poc.
 538
 539 endif # COMEDI_ISA_DRIVERS
 540
 541 menuconfig COMEDI_PCI_DRIVERS
 542         bool "Comedi PCI drivers"
 543         depends on PCI
 544         ---help---
 545           Enable comedi PCI drivers to be built
 546
 547           Note that the answer to this question won't directly affect the
 548           kernel: saying N will just cause the configurator to skip all
 549           the questions about PCI comedi drivers.
 550
 551 if COMEDI_PCI_DRIVERS
 552
 553 config COMEDI_8255_PCI
 554         tristate "Generic PCI based 8255 digital i/o board support"
 555         select COMEDI_8255
 556         ---help---
 557           Enable support for PCI based 8255 digital i/o boards. This driver
 558           provides a PCI wrapper around the generic 8255 driver.
 559
 560           Supported boards:
 561             ADlink - PCI-7224, PCI-7248, and PCI-7296
 562             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
 563                                     PCI-DIO96H
 564             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
 565                                    PCI-6503B, PCI-6503X, and PXI-6503
 566
 567           To compile this driver as a module, choose M here: the module will
 568           be called 8255_pci.
 569
 570 config COMEDI_ADDI_APCI_035
 571         tristate "ADDI-DATA APCI_035 support"
 572         ---help---
 573           Enable support for ADDI-DATA APCI_035 cards
 574
 575           To compile this driver as a module, choose M here: the module will be
 576           called addi_apci_035.
 577
 578 config COMEDI_ADDI_APCI_1032
 579         tristate "ADDI-DATA APCI_1032 support"
 580         ---help---
 581           Enable support for ADDI-DATA APCI_1032 cards
 582
 583           To compile this driver as a module, choose M here: the module will be
 584           called addi_apci_1032.
 585
 586 config COMEDI_ADDI_APCI_1500
 587         tristate "ADDI-DATA APCI_1500 support"
 588         ---help---
 589           Enable support for ADDI-DATA APCI_1500 cards
 590
 591           To compile this driver as a module, choose M here: the module will be
 592           called addi_apci_1500.
 593
 594 config COMEDI_ADDI_APCI_1516
 595         tristate "ADDI-DATA APCI-1016/1516/2016 support"
 596         ---help---
 597           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
 598           These are 16 channel, optically isolated, digital I/O boards. The 1516
 599           and 2016 boards also have a watchdog for resetting the outputs to "0".
 600
 601           To compile this driver as a module, choose M here: the module will be
 602           called addi_apci_1516.
 603
 604 config COMEDI_ADDI_APCI_1564
 605         tristate "ADDI-DATA APCI_1564 support"
 606         ---help---
 607           Enable support for ADDI-DATA APCI_1564 cards
 608
 609           To compile this driver as a module, choose M here: the module will be
 610           called addi_apci_1564.
 611
 612 config COMEDI_ADDI_APCI_16XX
 613         tristate "ADDI-DATA APCI_16xx support"
 614         ---help---
 615           Enable support for ADDI-DATA APCI_16xx cards
 616
 617           To compile this driver as a module, choose M here: the module will be
 618           called addi_apci_16xx.
 619
 620 config COMEDI_ADDI_APCI_2032
 621         tristate "ADDI-DATA APCI_2032 support"
 622         ---help---
 623           Enable support for ADDI-DATA APCI_2032 cards
 624
 625           To compile this driver as a module, choose M here: the module will be
 626           called addi_apci_2032.
 627
 628 config COMEDI_ADDI_APCI_2200
 629         tristate "ADDI-DATA APCI_2200 support"
 630         ---help---
 631           Enable support for ADDI-DATA APCI_2200 cards
 632
 633           To compile this driver as a module, choose M here: the module will be
 634           called addi_apci_2200.
 635
 636 config COMEDI_ADDI_APCI_3120
 637         tristate "ADDI-DATA APCI_3120/3001 support"
 638         depends on VIRT_TO_BUS
 639         select COMEDI_FC
 640         ---help---
 641           Enable support for ADDI-DATA APCI_3120/3001 cards
 642
 643           To compile this driver as a module, choose M here: the module will be
 644           called addi_apci_3120.
 645
 646 config COMEDI_ADDI_APCI_3501
 647         tristate "ADDI-DATA APCI_3501 support"
 648         ---help---
 649           Enable support for ADDI-DATA APCI_3501 cards
 650
 651           To compile this driver as a module, choose M here: the module will be
 652           called addi_apci_3501.
 653
 654 config COMEDI_ADDI_APCI_3XXX
 655         tristate "ADDI-DATA APCI_3xxx support"
 656         ---help---
 657           Enable support for ADDI-DATA APCI_3xxx cards
 658
 659           To compile this driver as a module, choose M here: the module will be
 660           called addi_apci_3xxx.
 661
 662 config COMEDI_ADL_PCI6208
 663         tristate "ADLink PCI-6208A support"
 664         ---help---
 665           Enable support for ADLink PCI-6208A cards
 666
 667           To compile this driver as a module, choose M here: the module will be
 668           called adl_pci6208.
 669
 670 config COMEDI_ADL_PCI7X3X
 671         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
 672         ---help---
 673           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
 674           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
 675           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
 676           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
 677
 678           To compile this driver as a module, choose M here: the module will be
 679           called adl_pci7x3x.
 680
 681 config COMEDI_ADL_PCI8164
 682         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
 683         ---help---
 684           Enable support for ADlink PCI-8164 4 Axes Motion Control board
 685
 686           To compile this driver as a module, choose M here: the module will be
 687           called adl_pci8164.
 688
 689 config COMEDI_ADL_PCI9111
 690         tristate "ADLink PCI-9111HR support"
 691         select COMEDI_FC
 692         ---help---
 693           Enable support for ADlink PCI9111 cards
 694
 695           To compile this driver as a module, choose M here: the module will be
 696           called adl_pci9111.
 697
 698 config COMEDI_ADL_PCI9118
 699         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
 700         select COMEDI_FC
 701         depends on VIRT_TO_BUS
 702         ---help---
 703           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
 704
 705           To compile this driver as a module, choose M here: the module will be
 706           called adl_pci9118.
 707
 708 config COMEDI_ADV_PCI1710
 709         tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
 710         ---help---
 711           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
 712           PCI-1713, PCI-1720 and PCI-1731
 713
 714           To compile this driver as a module, choose M here: the module will be
 715           called adv_pci1710.
 716
 717 config COMEDI_ADV_PCI1723
 718         tristate "Advantech PCI-1723 support"
 719         ---help---
 720           Enable support for Advantech PCI-1723 cards
 721
 722           To compile this driver as a module, choose M here: the module will be
 723           called adv_pci1723.
 724
 725 config COMEDI_ADV_PCI_DIO
 726         tristate "Advantech PCI DIO card support"
 727         select COMEDI_8255
 728         ---help---
 729           Enable support for Advantech PCI DIO cards
 730           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
 731           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
 732           PCI-1760 and PCI-1762
 733
 734           To compile this driver as a module, choose M here: the module will be
 735           called adv_pci_dio.
 736
 737 config COMEDI_AMPLC_DIO200_PCI
 738         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
 739         select COMEDI_AMPLC_DIO200
 740         ---help---
 741           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
 742           and PCIe296 DIO boards.
 743
 744           To compile this driver as a module, choose M here: the module will be
 745           called amplc_dio200.
 746
 747 config COMEDI_AMPLC_PC236_PCI
 748         tristate "Amplicon PCI236 DIO board support"
 749         select COMEDI_AMPLC_PC236
 750         ---help---
 751           Enable support for Amplicon PCI236 DIO board.
 752
 753           To compile this driver as a module, choose M here: the module will be
 754           called amplc_pc236.
 755
 756 config COMEDI_AMPLC_PC263_PCI
 757         tristate "Amplicon PCI263 relay board support"
 758         select COMEDI_AMPLC_PC263
 759         ---help---
 760           Enable support for Amplicon PCI263 relay board.
 761
 762           To compile this driver as a module, choose M here: the module will be
 763           called amplc_pc263.
 764
 765 config COMEDI_AMPLC_PCI224
 766         tristate "Amplicon PCI224 and PCI234 support"
 767         select COMEDI_FC
 768         ---help---
 769           Enable support for Amplicon PCI224 and PCI234 AO boards
 770
 771           To compile this driver as a module, choose M here: the module will be
 772           called amplc_pci224.
 773
 774 config COMEDI_AMPLC_PCI230
 775         tristate "Amplicon PCI230 and PCI260 support"
 776         select COMEDI_8255
 777         ---help---
 778           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
 779           boards
 780
 781           To compile this driver as a module, choose M here: the module will be
 782           called amplc_pci230.
 783
 784 config COMEDI_CONTEC_PCI_DIO
 785         tristate "Contec PIO1616L digital I/O board support"
 786         ---help---
 787           Enable support for the Contec PIO1616L digital I/O board
 788
 789           To compile this driver as a module, choose M here: the module will be
 790           called contec_pci_dio.
 791
 792 config COMEDI_DAS08_PCI
 793         tristate "DAS-08 PCI support"
 794         select COMEDI_DAS08
 795         ---help---
 796           Enable support for PCI DAS-08 cards.
 797
 798           To compile this driver as a module, choose M here: the module will be
 799           called das08.
 800
 801 config COMEDI_DT3000
 802         tristate "Data Translation DT3000 series support"
 803         ---help---
 804           Enable support for Data Translation DT3000 series
 805           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
 806           DT3004-200
 807
 808           To compile this driver as a module, choose M here: the module will be
 809           called dt3000.
 810
 811 config COMEDI_DYNA_PCI10XX
 812         tristate "Dynalog PCI DAQ series support"
 813         ---help---
 814           Enable support for Dynalog PCI DAQ series
 815           PCI-1050
 816
 817           To compile this driver as a module, choose M here: the module will be
 818           called dyna_pci10xx.
 819
 820 config COMEDI_UNIOXX5
 821         tristate "Fastwel UNIOxx-5 analog and digital io board support"
 822         ---help---
 823           Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
 824
 825           To compile this driver as a module, choose M here: the module will be
 826           called unioxx5.
 827
 828 config COMEDI_GSC_HPDI
 829         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 830         select COMEDI_FC
 831         ---help---
 832           Enable support for General Standards Corporation high speed parallel
 833           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
 834           Only receive mode works, transmit not supported.
 835
 836           To compile this driver as a module, choose M here: the module will be
 837           called gsc_hpdi.
 838
 839 config COMEDI_ICP_MULTI
 840         tristate "Inova ICP_MULTI support"
 841         ---help---
 842           Enable support for Inova ICP_MULTI card
 843
 844           To compile this driver as a module, choose M here: the module will be
 845           called icp_multi.
 846
 847 config COMEDI_II_PCI20KC
 848         tristate "Intelligent Instruments PCI-20001C carrier support"
 849         ---help---
 850           Enable support for Intelligent Instruments PCI-20001C carrier
 851           PCI-20001, PCI-20006 and PCI-20341
 852
 853           To compile this driver as a module, choose M here: the module will be
 854           called ii_pci20kc.
 855
 856 config COMEDI_DAQBOARD2000
 857         tristate "IOtech DAQboard/2000 support"
 858         select COMEDI_8255
 859         ---help---
 860           Enable support for the IOtech DAQboard/2000
 861
 862           To compile this driver as a module, choose M here: the module will be
 863           called daqboard2000.
 864
 865 config COMEDI_JR3_PCI
 866         tristate "JR3/PCI force sensor board support"
 867         ---help---
 868           Enable support for JR3/PCI force sensor boards
 869
 870           To compile this driver as a module, choose M here: the module will be
 871           called jr3_pci.
 872
 873 config COMEDI_KE_COUNTER
 874         tristate "Kolter-Electronic PCI Counter 1 card support"
 875         ---help---
 876           Enable support for Kolter-Electronic PCI Counter 1 cards
 877
 878           To compile this driver as a module, choose M here: the module will be
 879           called ke_counter.
 880
 881 config COMEDI_CB_PCIDAS64
 882         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
 883         select COMEDI_8255
 884         select COMEDI_FC
 885         ---help---
 886           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
 887           60xx, and 4020 series with the PLX 9080 PCI controller
 888
 889           To compile this driver as a module, choose M here: the module will be
 890           called cb_pcidas64.
 891
 892 config COMEDI_CB_PCIDAS
 893         tristate "MeasurementComputing PCI-DAS support"
 894         select COMEDI_8255
 895         select COMEDI_FC
 896         ---help---
 897           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
 898           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
 899           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
 900           and PCI_DAS1002.
 901
 902           To compile this driver as a module, choose M here: the module will be
 903           called cb_pcidas.
 904
 905 config COMEDI_CB_PCIDDA
 906         tristate "MeasurementComputing PCI-DDA series support"
 907         select COMEDI_8255
 908         ---help---
 909           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
 910           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
 911           PCI-DDA04/16 and PCI-DDA02/16
 912
 913           To compile this driver as a module, choose M here: the module will be
 914           called cb_pcidda.
 915
 916 config COMEDI_CB_PCIMDAS
 917         tristate "MeasurementComputing PCIM-DAS1602/16 support"
 918         select COMEDI_8255
 919         ---help---
 920           Enable support for ComputerBoards/MeasurementComputing PCI Migration
 921           series PCIM-DAS1602/16
 922
 923           To compile this driver as a module, choose M here: the module will be
 924           called cb_pcimdas.
 925
 926 config COMEDI_CB_PCIMDDA
 927         tristate "MeasurementComputing PCIM-DDA06-16 support"
 928         select COMEDI_8255
 929         ---help---
 930           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
 931
 932           To compile this driver as a module, choose M here: the module will be
 933           called cb_pcimdda.
 934
 935 config COMEDI_ME4000
 936         tristate "Meilhaus ME-4000 support"
 937         ---help---
 938           Enable support for Meilhaus PCI data acquisition cards
 939           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
 940
 941           To compile this driver as a module, choose M here: the module will be
 942           called me4000.
 943
 944 config COMEDI_ME_DAQ
 945         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
 946         ---help---
 947           Enable support for Meilhaus PCI data acquisition cards
 948           ME-2000i, ME-2600i and ME-3000vm1
 949
 950           To compile this driver as a module, choose M here: the module will be
 951           called me_daq.
 952
 953 config COMEDI_NI_6527
 954         tristate "NI 6527 support"
 955         select COMEDI_MITE
 956         ---help---
 957           Enable support for the National Instruments 6527 PCI card
 958
 959           To compile this driver as a module, choose M here: the module will be
 960           called ni_6527.
 961
 962 config COMEDI_NI_65XX
 963         tristate "NI 65xx static dio PCI card support"
 964         select COMEDI_MITE
 965         ---help---
 966           Enable support for National Instruments 65xx static dio boards.
 967           Supported devices: National Instruments PCI-6509 (ni_65xx),
 968           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
 969           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
 970           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
 971
 972           To compile this driver as a module, choose M here: the module will be
 973           called ni_65xx.
 974
 975 config COMEDI_NI_660X
 976         tristate "NI 660x counter/timer PCI card support"
 977         select COMEDI_NI_TIOCMD
 978         ---help---
 979           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
 980           PXI-6602 and PXI-6608.
 981
 982           To compile this driver as a module, choose M here: the module will be
 983           called ni_660x.
 984
 985 config COMEDI_NI_670X
 986         tristate "NI 670x PCI card support"
 987         select COMEDI_MITE
 988         ---help---
 989           Enable support for National Instruments PCI-6703 and PCI-6704
 990
 991           To compile this driver as a module, choose M here: the module will be
 992           called ni_670x.
 993
 994 config COMEDI_NI_LABPC
 995         tristate "NI Lab-PC and compatibles ISA and PCI support"
 996         select COMEDI_MITE
 997         select COMEDI_8255
 998         select COMEDI_FC
 999         depends on VIRT_TO_BUS
1000         ---help---
1001           Enable support for National Instruments Lab-PC and compatibles
1002           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1003           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1004           not yet been added to the driver.
1005
1006           To compile this driver as a module, choose M here: the module will be
1007           called ni_labpc.
1008
1009 config COMEDI_NI_PCIDIO
1010         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1011         select COMEDI_MITE
1012         select COMEDI_8255
1013         ---help---
1014           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1015           PCI-6533 and PCI-6534
1016
1017           To compile this driver as a module, choose M here: the module will be
1018           called ni_pcidio.
1019
1020 config COMEDI_NI_PCIMIO
1021         tristate "NI PCI-MIO-E series and M series support"
1022         select COMEDI_NI_TIOCMD
1023         select COMEDI_8255
1024         select COMEDI_FC
1025         ---help---
1026           Enable support for National Instruments PCI-MIO-E series and M series
1027           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1028           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1029           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1030           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1031           PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1032           PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1033           PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1034           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1035           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1036
1037           To compile this driver as a module, choose M here: the module will be
1038           called ni_pcimio.
1039
1040 config COMEDI_RTD520
1041         tristate "Real Time Devices PCI4520/DM7520 support"
1042         ---help---
1043           Enable support for Real Time Devices PCI4520/DM7520
1044
1045           To compile this driver as a module, choose M here: the module will be
1046           called rtd520.
1047
1048 config COMEDI_S526
1049         tristate "Sensoray s526 support"
1050         ---help---
1051           Enable support for Sensoray s526
1052
1053           To compile this driver as a module, choose M here: the module will be
1054           called s526.
1055
1056 config COMEDI_S626
1057         tristate "Sensoray 626 support"
1058         select COMEDI_FC
1059         ---help---
1060           Enable support for Sensoray 626
1061
1062           To compile this driver as a module, choose M here: the module will be
1063           called s626.
1064
1065 config COMEDI_SSV_DNP
1066         tristate "SSV Embedded Systems DIL/Net-PC support"
1067         ---help---
1068           Enable support for SSV Embedded Systems DIL/Net-PC
1069
1070           To compile this driver as a module, choose M here: the module will be
1071           called ssv_dnp.
1072
1073 config COMEDI_MITE
1074         tristate
1075
1076 config COMEDI_NI_TIOCMD
1077         tristate
1078         select COMEDI_NI_TIO
1079         select COMEDI_MITE
1080
1081 endif # COMEDI_PCI_DRIVERS
1082
1083 menuconfig COMEDI_PCMCIA_DRIVERS
1084         bool "Comedi PCMCIA drivers"
1085         depends on PCMCIA
1086         ---help---
1087           Enable comedi PCMCIA and PCCARD drivers to be built
1088
1089           Note that the answer to this question won't directly affect the
1090           kernel: saying N will just cause the configurator to skip all
1091           the questions about PCMCIA comedi drivers.
1092
1093 if COMEDI_PCMCIA_DRIVERS
1094
1095 config COMEDI_CB_DAS16_CS
1096         tristate "CB DAS16 series PCMCIA support"
1097         ---help---
1098           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1099           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1100
1101           To compile this driver as a module, choose M here: the module will be
1102           called cb_das16_cs.
1103
1104 config COMEDI_DAS08_CS
1105         tristate "CB DAS08 PCMCIA support"
1106         select COMEDI_DAS08
1107         ---help---
1108           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1109           PCMCIA card
1110
1111           To compile this driver as a module, choose M here: the module will be
1112           called das08_cs.
1113
1114 config COMEDI_NI_DAQ_700_CS
1115         tristate "NI DAQCard-700 PCMCIA support"
1116         ---help---
1117           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1118
1119           To compile this driver as a module, choose M here: the module will be
1120           called ni_daq_700.
1121
1122 config COMEDI_NI_DAQ_DIO24_CS
1123         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1124         select COMEDI_8255
1125         ---help---
1126           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1127
1128           To compile this driver as a module, choose M here: the module will be
1129           called ni_daq_dio24.
1130
1131 config COMEDI_NI_LABPC_CS
1132         tristate "NI DAQCard-1200 PCMCIA support"
1133         depends on COMEDI_NI_LABPC
1134         ---help---
1135           Enable support for the National Instruments PCMCIA DAQCard-1200
1136
1137           To compile this driver as a module, choose M here: the module will be
1138           called ni_labpc_cs.
1139
1140 config COMEDI_NI_MIO_CS
1141         tristate "NI DAQCard E series PCMCIA support"
1142         select COMEDI_NI_TIO
1143         select COMEDI_8255
1144         select COMEDI_FC
1145         ---help---
1146           Enable support for the National Instruments PCMCIA DAQCard E series
1147           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1148           and DAQCard-6036E
1149
1150           To compile this driver as a module, choose M here: the module will be
1151           called ni_mio_cs.
1152
1153 config COMEDI_QUATECH_DAQP_CS
1154         tristate "Quatech DAQP PCMCIA data capture card support"
1155         ---help---
1156           Enable support for the Quatech DAQP PCMCIA data capture cards
1157           DAQP-208 and DAQP-308
1158
1159           To compile this driver as a module, choose M here: the module will be
1160           called quatech_daqp_cs.
1161
1162 endif # COMEDI_PCMCIA_DRIVERS
1163
1164 menuconfig COMEDI_USB_DRIVERS
1165         bool "Comedi USB drivers"
1166         depends on USB
1167         ---help---
1168           Enable comedi USB drivers to be built
1169
1170           Note that the answer to this question won't directly affect the
1171           kernel: saying N will just cause the configurator to skip all
1172           the questions about USB comedi drivers.
1173
1174 if COMEDI_USB_DRIVERS
1175
1176 config COMEDI_DT9812
1177         tristate "DataTranslation DT9812 USB module support"
1178         ---help---
1179           Enable support for the Data Translation DT9812 USB module
1180
1181           To compile this driver as a module, choose M here: the module will be
1182           called dt9812.
1183
1184 config COMEDI_USBDUX
1185         tristate "ITL USB-DUX-D support"
1186         ---help---
1187           Enable support for the Incite Technology Ltd USB-DUX-D Board
1188
1189           To compile this driver as a module, choose M here: the module will be
1190           called usbdux.
1191
1192 config COMEDI_USBDUXFAST
1193         tristate "ITL USB-DUXfast support"
1194         select COMEDI_FC
1195         ---help---
1196           Enable support for the Incite Technology Ltd USB-DUXfast Board
1197
1198           To compile this driver as a module, choose M here: the module will be
1199           called usbduxfast.
1200
1201 config COMEDI_USBDUXSIGMA
1202         tristate "ITL USB-DUXsigma support"
1203         select COMEDI_FC
1204         ---help---
1205           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1206
1207           To compile this driver as a module, choose M here: the module will be
1208           called usbduxsigma.
1209
1210 config COMEDI_VMK80XX
1211         tristate "Velleman VM110/VM140 USB Board support"
1212         ---help---
1213           Build the Velleman USB Board Low-Level Driver supporting the
1214           K8055/K8061 aka VM110/VM140 devices
1215
1216           To compile this driver as a module, choose M here: the module will be
1217           called vmk80xx.
1218
1219 endif # COMEDI_USB_DRIVERS
1220
1221 config COMEDI_8255
1222         tristate "Generic 8255 support"
1223         ---help---
1224           Enable generic 8255 support.
1225
1226           You should enable compilation this driver if you plan to use a board
1227           that has an 8255 chip. For multifunction boards, the main driver will
1228           configure the 8255 subdevice automatically.
1229
1230           Note that most PCI based 8255 boards use the 8255_pci driver as a
1231           wrapper around this driver.
1232
1233           To compile this driver as a module, choose M here: the module will be
1234           called 8255.
1235
1236 config COMEDI_FC
1237         tristate
1238
1239 config COMEDI_AMPLC_DIO200
1240         tristate
1241
1242 config COMEDI_AMPLC_PC236
1243         tristate
1244         select COMEDI_8255
1245
1246 config COMEDI_AMPLC_PC263
1247         tristate
1248
1249 config COMEDI_DAS08
1250         tristate
1251         select COMEDI_8255
1252
1253 config COMEDI_NI_TIO
1254         tristate
1255
1256 endif # COMEDI