projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'upstream' into for-linus
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / serial / serial_cs.c
1 /*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32 ======================================================================*/
33
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/serial_core.h>
43 #include <linux/delay.h>
44 #include <linux/major.h>
45 #include <asm/io.h>
46 #include <asm/system.h>
47
48 #include <pcmcia/cs_types.h>
49 #include <pcmcia/cs.h>
50 #include <pcmcia/cistpl.h>
51 #include <pcmcia/ciscode.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/cisreg.h>
54
55 #include "8250.h"
56
57
58 /*====================================================================*/
59
60 /* Parameters that can be set with 'insmod' */
61
62 /* Enable the speaker? */
63 static int do_sound = 1;
64 /* Skip strict UART tests? */
65 static int buggy_uart;
66
67 module_param(do_sound, int, 0444);
68 module_param(buggy_uart, int, 0444);
69
70 /*====================================================================*/
71
72 /* Table of multi-port card ID's */
73
74 struct serial_quirk {
75 unsigned int manfid;
76 unsigned int prodid;
77 int multi; /* 1 = multifunction, > 1 = # ports */
78 void (*config)(struct pcmcia_device *);
79 void (*setup)(struct pcmcia_device *, struct uart_port *);
80 void (*wakeup)(struct pcmcia_device *);
81 int (*post)(struct pcmcia_device *);
82 };
83
84 struct serial_info {
85 struct pcmcia_device *p_dev;
86 int ndev;
87 int multi;
88 int slave;
89 int manfid;
90 int prodid;
91 int c950ctrl;
92 int line[4];
93 const struct serial_quirk *quirk;
94 };
95
96 struct serial_cfg_mem {
97 tuple_t tuple;
98 cisparse_t parse;
99 u_char buf[256];
100 };
101
102 /*
103 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
104 * manfid 0x0160, 0x0104
105 * This card appears to have a 14.7456MHz clock.
106 */
107 /* Generic Modem: MD55x (GPRS/EDGE) have
108 * Elan VPU16551 UART with 14.7456MHz oscillator
109 * manfid 0x015D, 0x4C45
110 */
111 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
112 {
113 port->uartclk = 14745600;
114 }
115
116 static int quirk_post_ibm(struct pcmcia_device *link)
117 {
118 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
119 int ret;
120
121 ret = pcmcia_access_configuration_register(link, &reg);
122 if (ret)
123 goto failed;
124
125 reg.Action = CS_WRITE;
126 reg.Value = reg.Value | 1;
127 ret = pcmcia_access_configuration_register(link, &reg);
128 if (ret)
129 goto failed;
130 return 0;
131
132 failed:
133 return -ENODEV;
134 }
135
136 /*
137 * Nokia cards are not really multiport cards. Shouldn't this
138 * be handled by setting the quirk entry .multi = 0 | 1 ?
139 */
140 static void quirk_config_nokia(struct pcmcia_device *link)
141 {
142 struct serial_info *info = link->priv;
143
144 if (info->multi > 1)
145 info->multi = 1;
146 }
147
148 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
149 {
150 struct serial_info *info = link->priv;
151
152 if (info->c950ctrl)
153 outb(12, info->c950ctrl + 1);
154 }
155
156 /* request_region? oxsemi branch does no request_region too... */
157 /*
158 * This sequence is needed to properly initialize MC45 attached to OXCF950.
159 * I tried decreasing these msleep()s, but it worked properly (survived
160 * 1000 stop/start operations) with these timeouts (or bigger).
161 */
162 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
163 {
164 struct serial_info *info = link->priv;
165 unsigned int ctrl = info->c950ctrl;
166
167 outb(0xA, ctrl + 1);
168 msleep(100);
169 outb(0xE, ctrl + 1);
170 msleep(300);
171 outb(0xC, ctrl + 1);
172 msleep(100);
173 outb(0xE, ctrl + 1);
174 msleep(200);
175 outb(0xF, ctrl + 1);
176 msleep(100);
177 outb(0xE, ctrl + 1);
178 msleep(100);
179 outb(0xC, ctrl + 1);
180 }
181
182 /*
183 * Socket Dual IO: this enables irq's for second port
184 */
185 static void quirk_config_socket(struct pcmcia_device *link)
186 {
187 struct serial_info *info = link->priv;
188
189 if (info->multi) {
190 link->conf.Present |= PRESENT_EXT_STATUS;
191 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
192 }
193 }
194
195 static const struct serial_quirk quirks[] = {
196 {
197 .manfid = 0x0160,
198 .prodid = 0x0104,
199 .multi = -1,
200 .setup = quirk_setup_brainboxes_0104,
201 }, {
202 .manfid = 0x015D,
203 .prodid = 0x4C45,
204 .multi = -1,
205 .setup = quirk_setup_brainboxes_0104,
206 }, {
207 .manfid = MANFID_IBM,
208 .prodid = ~0,
209 .multi = -1,
210 .post = quirk_post_ibm,
211 }, {
212 .manfid = MANFID_INTEL,
213 .prodid = PRODID_INTEL_DUAL_RS232,
214 .multi = 2,
215 }, {
216 .manfid = MANFID_NATINST,
217 .prodid = PRODID_NATINST_QUAD_RS232,
218 .multi = 4,
219 }, {
220 .manfid = MANFID_NOKIA,
221 .prodid = ~0,
222 .multi = -1,
223 .config = quirk_config_nokia,
224 }, {
225 .manfid = MANFID_OMEGA,
226 .prodid = PRODID_OMEGA_QSP_100,
227 .multi = 4,
228 }, {
229 .manfid = MANFID_OXSEMI,
230 .prodid = ~0,
231 .multi = -1,
232 .wakeup = quirk_wakeup_oxsemi,
233 }, {
234 .manfid = MANFID_POSSIO,
235 .prodid = PRODID_POSSIO_GCC,
236 .multi = -1,
237 .wakeup = quirk_wakeup_possio_gcc,
238 }, {
239 .manfid = MANFID_QUATECH,
240 .prodid = PRODID_QUATECH_DUAL_RS232,
241 .multi = 2,
242 }, {
243 .manfid = MANFID_QUATECH,
244 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
245 .multi = 2,
246 }, {
247 .manfid = MANFID_QUATECH,
248 .prodid = PRODID_QUATECH_DUAL_RS232_G,
249 .multi = 2,
250 }, {
251 .manfid = MANFID_QUATECH,
252 .prodid = PRODID_QUATECH_QUAD_RS232,
253 .multi = 4,
254 }, {
255 .manfid = MANFID_SOCKET,
256 .prodid = PRODID_SOCKET_DUAL_RS232,
257 .multi = 2,
258 .config = quirk_config_socket,
259 }, {
260 .manfid = MANFID_SOCKET,
261 .prodid = ~0,
262 .multi = -1,
263 .config = quirk_config_socket,
264 }
265 };
266
267
268 static int serial_config(struct pcmcia_device * link);
269
270
271 /*======================================================================
272
273 After a card is removed, serial_remove() will unregister
274 the serial device(s), and release the PCMCIA configuration.
275
276 ======================================================================*/
277
278 static void serial_remove(struct pcmcia_device *link)
279 {
280 struct serial_info *info = link->priv;
281 int i;
282
283 dev_dbg(&link->dev, "serial_release\n");
284
285 /*
286 * Recheck to see if the device is still configured.
287 */
288 for (i = 0; i < info->ndev; i++)
289 serial8250_unregister_port(info->line[i]);
290
291 if (!info->slave)
292 pcmcia_disable_device(link);
293 }
294
295 static int serial_suspend(struct pcmcia_device *link)
296 {
297 struct serial_info *info = link->priv;
298 int i;
299
300 for (i = 0; i < info->ndev; i++)
301 serial8250_suspend_port(info->line[i]);
302
303 return 0;
304 }
305
306 static int serial_resume(struct pcmcia_device *link)
307 {
308 struct serial_info *info = link->priv;
309 int i;
310
311 for (i = 0; i < info->ndev; i++)
312 serial8250_resume_port(info->line[i]);
313
314 if (info->quirk && info->quirk->wakeup)
315 info->quirk->wakeup(link);
316
317 return 0;
318 }
319
320 /*======================================================================
321
322 serial_attach() creates an "instance" of the driver, allocating
323 local data structures for one device. The device is registered
324 with Card Services.
325
326 ======================================================================*/
327
328 static int serial_probe(struct pcmcia_device *link)
329 {
330 struct serial_info *info;
331
332 dev_dbg(&link->dev, "serial_attach()\n");
333
334 /* Create new serial device */
335 info = kzalloc(sizeof (*info), GFP_KERNEL);
336 if (!info)
337 return -ENOMEM;
338 info->p_dev = link;
339 link->priv = info;
340
341 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
342 link->io.NumPorts1 = 8;
343 link->conf.Attributes = CONF_ENABLE_IRQ;
344 if (do_sound) {
345 link->conf.Attributes |= CONF_ENABLE_SPKR;
346 link->conf.Status = CCSR_AUDIO_ENA;
347 }
348 link->conf.IntType = INT_MEMORY_AND_IO;
349
350 return serial_config(link);
351 }
352
353 /*======================================================================
354
355 This deletes a driver "instance". The device is de-registered
356 with Card Services. If it has been released, all local data
357 structures are freed. Otherwise, the structures will be freed
358 when the device is released.
359
360 ======================================================================*/
361
362 static void serial_detach(struct pcmcia_device *link)
363 {
364 struct serial_info *info = link->priv;
365
366 dev_dbg(&link->dev, "serial_detach\n");
367
368 /*
369 * Ensure any outstanding scheduled tasks are completed.
370 */
371 flush_scheduled_work();
372
373 /*
374 * Ensure that the ports have been released.
375 */
376 serial_remove(link);
377
378 /* free bits */
379 kfree(info);
380 }
381
382 /*====================================================================*/
383
384 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
385 unsigned int iobase, int irq)
386 {
387 struct uart_port port;
388 int line;
389
390 memset(&port, 0, sizeof (struct uart_port));
391 port.iobase = iobase;
392 port.irq = irq;
393 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
394 port.uartclk = 1843200;
395 port.dev = &handle->dev;
396 if (buggy_uart)
397 port.flags |= UPF_BUGGY_UART;
398
399 if (info->quirk && info->quirk->setup)
400 info->quirk->setup(handle, &port);
401
402 line = serial8250_register_port(&port);
403 if (line < 0) {
404 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
405 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
406 return -EINVAL;
407 }
408
409 info->line[info->ndev] = line;
410 info->ndev++;
411
412 return 0;
413 }
414
415 /*====================================================================*/
416
417 static int simple_config_check(struct pcmcia_device *p_dev,
418 cistpl_cftable_entry_t *cf,
419 cistpl_cftable_entry_t *dflt,
420 unsigned int vcc,
421 void *priv_data)
422 {
423 static const int size_table[2] = { 8, 16 };
424 int *try = priv_data;
425
426 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
427 p_dev->conf.Vpp =
428 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
429
430 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
431 && (cf->io.win[0].base != 0)) {
432 p_dev->io.BasePort1 = cf->io.win[0].base;
433 p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
434 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
435 if (!pcmcia_request_io(p_dev, &p_dev->io))
436 return 0;
437 }
438 return -EINVAL;
439 }
440
441 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
442 cistpl_cftable_entry_t *cf,
443 cistpl_cftable_entry_t *dflt,
444 unsigned int vcc,
445 void *priv_data)
446 {
447 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
448 int j;
449
450 if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
451 for (j = 0; j < 5; j++) {
452 p_dev->io.BasePort1 = base[j];
453 p_dev->io.IOAddrLines = base[j] ? 16 : 3;
454 if (!pcmcia_request_io(p_dev, &p_dev->io))
455 return 0;
456 }
457 }
458 return -ENODEV;
459 }
460
461 static int simple_config(struct pcmcia_device *link)
462 {
463 struct serial_info *info = link->priv;
464 int i = -ENODEV, try;
465
466 /* If the card is already configured, look up the port and irq */
467 if (link->function_config) {
468 unsigned int port = 0;
469 if ((link->io.BasePort2 != 0) &&
470 (link->io.NumPorts2 == 8)) {
471 port = link->io.BasePort2;
472 info->slave = 1;
473 } else if ((info->manfid == MANFID_OSITECH) &&
474 (link->io.NumPorts1 == 0x40)) {
475 port = link->io.BasePort1 + 0x28;
476 info->slave = 1;
477 }
478 if (info->slave) {
479 return setup_serial(link, info, port,
480 link->irq);
481 }
482 }
483
484 /* First pass: look for a config entry that looks normal.
485 * Two tries: without IO aliases, then with aliases */
486 for (try = 0; try < 4; try++)
487 if (!pcmcia_loop_config(link, simple_config_check, &try))
488 goto found_port;
489
490 /* Second pass: try to find an entry that isn't picky about
491 its base address, then try to grab any standard serial port
492 address, and finally try to get any free port. */
493 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
494 goto found_port;
495
496 printk(KERN_NOTICE
497 "serial_cs: no usable port range found, giving up\n");
498 return -1;
499
500 found_port:
501 if (info->multi && (info->manfid == MANFID_3COM))
502 link->conf.ConfigIndex &= ~(0x08);
503
504 /*
505 * Apply any configuration quirks.
506 */
507 if (info->quirk && info->quirk->config)
508 info->quirk->config(link);
509
510 i = pcmcia_request_configuration(link, &link->conf);
511 if (i != 0)
512 return -1;
513 return setup_serial(link, info, link->io.BasePort1, link->irq);
514 }
515
516 static int multi_config_check(struct pcmcia_device *p_dev,
517 cistpl_cftable_entry_t *cf,
518 cistpl_cftable_entry_t *dflt,
519 unsigned int vcc,
520 void *priv_data)
521 {
522 int *base2 = priv_data;
523
524 /* The quad port cards have bad CIS's, so just look for a
525 window larger than 8 ports and assume it will be right */
526 if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
527 p_dev->io.BasePort1 = cf->io.win[0].base;
528 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
529 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
530 *base2 = p_dev->io.BasePort1 + 8;
531 return 0;
532 }
533 }
534 return -ENODEV;
535 }
536
537 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
538 cistpl_cftable_entry_t *cf,
539 cistpl_cftable_entry_t *dflt,
540 unsigned int vcc,
541 void *priv_data)
542 {
543 int *base2 = priv_data;
544
545 if (cf->io.nwin == 2) {
546 p_dev->io.BasePort1 = cf->io.win[0].base;
547 p_dev->io.BasePort2 = cf->io.win[1].base;
548 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
549 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
550 *base2 = p_dev->io.BasePort2;
551 return 0;
552 }
553 }
554 return -ENODEV;
555 }
556
557 static int multi_config(struct pcmcia_device *link)
558 {
559 struct serial_info *info = link->priv;
560 int i, base2 = 0;
561
562 /* First, look for a generic full-sized window */
563 link->io.NumPorts1 = info->multi * 8;
564 if (pcmcia_loop_config(link, multi_config_check, &base2)) {
565 /* If that didn't work, look for two windows */
566 link->io.NumPorts1 = link->io.NumPorts2 = 8;
567 info->multi = 2;
568 if (pcmcia_loop_config(link, multi_config_check_notpicky,
569 &base2)) {
570 printk(KERN_NOTICE "serial_cs: no usable port range"
571 "found, giving up\n");
572 return -ENODEV;
573 }
574 }
575
576 if (!link->irq)
577 dev_warn(&link->dev,
578 "serial_cs: no usable IRQ found, continuing...\n");
579
580 /*
581 * Apply any configuration quirks.
582 */
583 if (info->quirk && info->quirk->config)
584 info->quirk->config(link);
585
586 i = pcmcia_request_configuration(link, &link->conf);
587 if (i != 0)
588 return -ENODEV;
589
590 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
591 * 8 registers are for the UART, the others are extra registers.
592 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
593 */
594 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
595 info->prodid == PRODID_POSSIO_GCC)) {
596 int err;
597
598 if (link->conf.ConfigIndex == 1 ||
599 link->conf.ConfigIndex == 3) {
600 err = setup_serial(link, info, base2,
601 link->irq);
602 base2 = link->io.BasePort1;
603 } else {
604 err = setup_serial(link, info, link->io.BasePort1,
605 link->irq);
606 }
607 info->c950ctrl = base2;
608
609 /*
610 * FIXME: We really should wake up the port prior to
611 * handing it over to the serial layer.
612 */
613 if (info->quirk && info->quirk->wakeup)
614 info->quirk->wakeup(link);
615
616 return 0;
617 }
618
619 setup_serial(link, info, link->io.BasePort1, link->irq);
620 for (i = 0; i < info->multi - 1; i++)
621 setup_serial(link, info, base2 + (8 * i),
622 link->irq);
623 return 0;
624 }
625
626 static int serial_check_for_multi(struct pcmcia_device *p_dev,
627 cistpl_cftable_entry_t *cf,
628 cistpl_cftable_entry_t *dflt,
629 unsigned int vcc,
630 void *priv_data)
631 {
632 struct serial_info *info = p_dev->priv;
633
634 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
635 info->multi = cf->io.win[0].len >> 3;
636
637 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
638 (cf->io.win[1].len == 8))
639 info->multi = 2;
640
641 return 0; /* break */
642 }
643
644
645 /*======================================================================
646
647 serial_config() is scheduled to run after a CARD_INSERTION event
648 is received, to configure the PCMCIA socket, and to make the
649 serial device available to the system.
650
651 ======================================================================*/
652
653 static int serial_config(struct pcmcia_device * link)
654 {
655 struct serial_info *info = link->priv;
656 int i;
657
658 dev_dbg(&link->dev, "serial_config\n");
659
660 /* Is this a compliant multifunction card? */
661 info->multi = (link->socket->functions > 1);
662
663 /* Is this a multiport card? */
664 info->manfid = link->manf_id;
665 info->prodid = link->card_id;
666
667 for (i = 0; i < ARRAY_SIZE(quirks); i++)
668 if ((quirks[i].manfid == ~0 ||
669 quirks[i].manfid == info->manfid) &&
670 (quirks[i].prodid == ~0 ||
671 quirks[i].prodid == info->prodid)) {
672 info->quirk = &quirks[i];
673 break;
674 }
675
676 /* Another check for dual-serial cards: look for either serial or
677 multifunction cards that ask for appropriate IO port ranges */
678 if ((info->multi == 0) &&
679 (link->has_func_id) &&
680 ((link->func_id == CISTPL_FUNCID_MULTI) ||
681 (link->func_id == CISTPL_FUNCID_SERIAL)))
682 pcmcia_loop_config(link, serial_check_for_multi, info);
683
684 /*
685 * Apply any multi-port quirk.
686 */
687 if (info->quirk && info->quirk->multi != -1)
688 info->multi = info->quirk->multi;
689
690 if (info->multi > 1)
691 i = multi_config(link);
692 else
693 i = simple_config(link);
694
695 if (i || info->ndev == 0)
696 goto failed;
697
698 /*
699 * Apply any post-init quirk. FIXME: This should really happen
700 * before we register the port, since it might already be in use.
701 */
702 if (info->quirk && info->quirk->post)
703 if (info->quirk->post(link))
704 goto failed;
705
706 return 0;
707
708 failed:
709 dev_warn(&link->dev, "serial_cs: failed to initialize\n");
710 serial_remove(link);
711 return -ENODEV;
712 }
713
714 static struct pcmcia_device_id serial_ids[] = {
715 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
716 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
717 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
718 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
719 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
720 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
721 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
726 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
727 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
728 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
729 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
730 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
731 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
732 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
733 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
734 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
735 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
736 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
737 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
738 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
739 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
740 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
741 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
742 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
743 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
744 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
745 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
746 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
747 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
748 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
749 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
750 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
751 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
752 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
753 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
754 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
755 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
756 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
757 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
758 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
759 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
760 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
761 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
762 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
763 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
764 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
765 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
766 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
767 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
768 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
769 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
770 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
771 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
772 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
773 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
774 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
775 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
776 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
777 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
778 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
779 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
780 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
781 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
782 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
783 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
784 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
785 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
786 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
787 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
788 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
789 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
790 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
791 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
792 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
793 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
794 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
795 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
796 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
797 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
798 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
799 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
800 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
801 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
802 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
803 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
804 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
805 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
806 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
807 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
808 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
809 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
810 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
811 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
812 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
813 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
814 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
815 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
816 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
817 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
818 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
819 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
820 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
821 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
822 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
823 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
824 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
825 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
826 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
827 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
828 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
829 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
830 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
831 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
832 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
833 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
834 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
835 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
836 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
837 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
838 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
839 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
840 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
841 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
842 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
843 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
844 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
845 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
846 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
847 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
848 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
849 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
850 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
851 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
852 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
853 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
854 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
855 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
856 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
857 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
858 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
859 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
860 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
861 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
862 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
863 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
864 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
865 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
866 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
867 /* too generic */
868 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
869 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
870 PCMCIA_DEVICE_FUNC_ID(2),
871 PCMCIA_DEVICE_NULL,
872 };
873 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
874
875 MODULE_FIRMWARE("cis/PCMLM28.cis");
876 MODULE_FIRMWARE("cis/DP83903.cis");
877 MODULE_FIRMWARE("cis/3CCFEM556.cis");
878 MODULE_FIRMWARE("cis/3CXEM556.cis");
879 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
880 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
881 MODULE_FIRMWARE("cis/SW_555_SER.cis");
882 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
883 MODULE_FIRMWARE("cis/COMpad2.cis");
884 MODULE_FIRMWARE("cis/COMpad4.cis");
885 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
886
887 static struct pcmcia_driver serial_cs_driver = {
888 .owner = THIS_MODULE,
889 .drv = {
890 .name = "serial_cs",
891 },
892 .probe = serial_probe,
893 .remove = serial_detach,
894 .id_table = serial_ids,
895 .suspend = serial_suspend,
896 .resume = serial_resume,
897 };
898
899 static int __init init_serial_cs(void)
900 {
901 return pcmcia_register_driver(&serial_cs_driver);
902 }
903
904 static void __exit exit_serial_cs(void)
905 {
906 pcmcia_unregister_driver(&serial_cs_driver);
907 }
908
909 module_init(init_serial_cs);
910 module_exit(exit_serial_cs);
911
912 MODULE_LICENSE("GPL");
kernel source for telekom puls (alcatel/mediatek)