2 * This is the Fusion MPT base driver providing common API layer interface
3 * for access to MPT (Message Passing Technology) firmware.
5 * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
6 * Copyright (C) 2007-2010 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
45 #include <linux/kernel.h>
46 #include <linux/module.h>
47 #include <linux/errno.h>
48 #include <linux/init.h>
49 #include <linux/slab.h>
50 #include <linux/types.h>
51 #include <linux/pci.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h>
55 #include <linux/interrupt.h>
56 #include <linux/dma-mapping.h>
57 #include <linux/sort.h>
59 #include <linux/time.h>
60 #include <linux/kthread.h>
61 #include <linux/aer.h>
63 #include "mpt2sas_base.h"
65 static MPT_CALLBACK mpt_callbacks
[MPT_MAX_CALLBACKS
];
67 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
69 #define MAX_HBA_QUEUE_DEPTH 30000
70 #define MAX_CHAIN_DEPTH 100000
71 static int max_queue_depth
= -1;
72 module_param(max_queue_depth
, int, 0);
73 MODULE_PARM_DESC(max_queue_depth
, " max controller queue depth ");
75 static int max_sgl_entries
= -1;
76 module_param(max_sgl_entries
, int, 0);
77 MODULE_PARM_DESC(max_sgl_entries
, " max sg entries ");
79 static int msix_disable
= -1;
80 module_param(msix_disable
, int, 0);
81 MODULE_PARM_DESC(msix_disable
, " disable msix routed interrupts (default=0)");
83 static int missing_delay
[2] = {-1, -1};
84 module_param_array(missing_delay
, int, NULL
, 0);
85 MODULE_PARM_DESC(missing_delay
, " device missing delay , io missing delay");
87 static int mpt2sas_fwfault_debug
;
88 MODULE_PARM_DESC(mpt2sas_fwfault_debug
, " enable detection of firmware fault "
89 "and halt firmware - (default=0)");
91 static int disable_discovery
= -1;
92 module_param(disable_discovery
, int, 0);
93 MODULE_PARM_DESC(disable_discovery
, " disable discovery ");
96 * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
100 _scsih_set_fwfault_debug(const char *val
, struct kernel_param
*kp
)
102 int ret
= param_set_int(val
, kp
);
103 struct MPT2SAS_ADAPTER
*ioc
;
108 printk(KERN_INFO
"setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug
);
109 list_for_each_entry(ioc
, &mpt2sas_ioc_list
, list
)
110 ioc
->fwfault_debug
= mpt2sas_fwfault_debug
;
114 module_param_call(mpt2sas_fwfault_debug
, _scsih_set_fwfault_debug
,
115 param_get_int
, &mpt2sas_fwfault_debug
, 0644);
118 * mpt2sas_remove_dead_ioc_func - kthread context to remove dead ioc
119 * @arg: input argument, used to derive ioc
121 * Return 0 if controller is removed from pci subsystem.
122 * Return -1 for other case.
124 static int mpt2sas_remove_dead_ioc_func(void *arg
)
126 struct MPT2SAS_ADAPTER
*ioc
= (struct MPT2SAS_ADAPTER
*)arg
;
127 struct pci_dev
*pdev
;
135 pci_stop_and_remove_bus_device(pdev
);
141 * _base_fault_reset_work - workq handling ioc fault conditions
142 * @work: input argument, used to derive ioc
148 _base_fault_reset_work(struct work_struct
*work
)
150 struct MPT2SAS_ADAPTER
*ioc
=
151 container_of(work
, struct MPT2SAS_ADAPTER
, fault_reset_work
.work
);
155 struct task_struct
*p
;
157 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
158 if (ioc
->shost_recovery
)
160 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
162 doorbell
= mpt2sas_base_get_iocstate(ioc
, 0);
163 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_MASK
) {
164 printk(MPT2SAS_INFO_FMT
"%s : SAS host is non-operational !!!!\n",
165 ioc
->name
, __func__
);
168 * Call _scsih_flush_pending_cmds callback so that we flush all
169 * pending commands back to OS. This call is required to aovid
170 * deadlock at block layer. Dead IOC will fail to do diag reset,
171 * and this call is safe since dead ioc will never return any
172 * command back from HW.
174 ioc
->schedule_dead_ioc_flush_running_cmds(ioc
);
176 * Set remove_host flag early since kernel thread will
177 * take some time to execute.
179 ioc
->remove_host
= 1;
180 /*Remove the Dead Host */
181 p
= kthread_run(mpt2sas_remove_dead_ioc_func
, ioc
,
182 "mpt2sas_dead_ioc_%d", ioc
->id
);
184 printk(MPT2SAS_ERR_FMT
185 "%s: Running mpt2sas_dead_ioc thread failed !!!!\n",
186 ioc
->name
, __func__
);
188 printk(MPT2SAS_ERR_FMT
189 "%s: Running mpt2sas_dead_ioc thread success !!!!\n",
190 ioc
->name
, __func__
);
193 return; /* don't rearm timer */
196 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
197 rc
= mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
199 printk(MPT2SAS_WARN_FMT
"%s: hard reset: %s\n", ioc
->name
,
200 __func__
, (rc
== 0) ? "success" : "failed");
201 doorbell
= mpt2sas_base_get_iocstate(ioc
, 0);
202 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
)
203 mpt2sas_base_fault_info(ioc
, doorbell
&
204 MPI2_DOORBELL_DATA_MASK
);
207 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
209 if (ioc
->fault_reset_work_q
)
210 queue_delayed_work(ioc
->fault_reset_work_q
,
211 &ioc
->fault_reset_work
,
212 msecs_to_jiffies(FAULT_POLLING_INTERVAL
));
213 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
217 * mpt2sas_base_start_watchdog - start the fault_reset_work_q
218 * @ioc: per adapter object
224 mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER
*ioc
)
228 if (ioc
->fault_reset_work_q
)
231 /* initialize fault polling */
232 INIT_DELAYED_WORK(&ioc
->fault_reset_work
, _base_fault_reset_work
);
233 snprintf(ioc
->fault_reset_work_q_name
,
234 sizeof(ioc
->fault_reset_work_q_name
), "poll_%d_status", ioc
->id
);
235 ioc
->fault_reset_work_q
=
236 create_singlethread_workqueue(ioc
->fault_reset_work_q_name
);
237 if (!ioc
->fault_reset_work_q
) {
238 printk(MPT2SAS_ERR_FMT
"%s: failed (line=%d)\n",
239 ioc
->name
, __func__
, __LINE__
);
242 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
243 if (ioc
->fault_reset_work_q
)
244 queue_delayed_work(ioc
->fault_reset_work_q
,
245 &ioc
->fault_reset_work
,
246 msecs_to_jiffies(FAULT_POLLING_INTERVAL
));
247 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
251 * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
252 * @ioc: per adapter object
258 mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER
*ioc
)
261 struct workqueue_struct
*wq
;
263 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
264 wq
= ioc
->fault_reset_work_q
;
265 ioc
->fault_reset_work_q
= NULL
;
266 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
268 if (!cancel_delayed_work(&ioc
->fault_reset_work
))
270 destroy_workqueue(wq
);
275 * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
276 * @ioc: per adapter object
277 * @fault_code: fault code
282 mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER
*ioc
, u16 fault_code
)
284 printk(MPT2SAS_ERR_FMT
"fault_state(0x%04x)!\n",
285 ioc
->name
, fault_code
);
289 * mpt2sas_halt_firmware - halt's mpt controller firmware
290 * @ioc: per adapter object
292 * For debugging timeout related issues. Writing 0xCOFFEE00
293 * to the doorbell register will halt controller firmware. With
294 * the purpose to stop both driver and firmware, the enduser can
295 * obtain a ring buffer from controller UART.
298 mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER
*ioc
)
302 if (!ioc
->fwfault_debug
)
307 doorbell
= readl(&ioc
->chip
->Doorbell
);
308 if ((doorbell
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
)
309 mpt2sas_base_fault_info(ioc
, doorbell
);
311 writel(0xC0FFEE00, &ioc
->chip
->Doorbell
);
312 printk(MPT2SAS_ERR_FMT
"Firmware is halted due to command "
313 "timeout\n", ioc
->name
);
316 panic("panic in %s\n", __func__
);
319 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
321 * _base_sas_ioc_info - verbose translation of the ioc status
322 * @ioc: per adapter object
323 * @mpi_reply: reply mf payload returned from firmware
324 * @request_hdr: request mf
329 _base_sas_ioc_info(struct MPT2SAS_ADAPTER
*ioc
, MPI2DefaultReply_t
*mpi_reply
,
330 MPI2RequestHeader_t
*request_hdr
)
332 u16 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) &
336 char *func_str
= NULL
;
338 /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
339 if (request_hdr
->Function
== MPI2_FUNCTION_SCSI_IO_REQUEST
||
340 request_hdr
->Function
== MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH
||
341 request_hdr
->Function
== MPI2_FUNCTION_EVENT_NOTIFICATION
)
344 if (ioc_status
== MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
)
347 switch (ioc_status
) {
349 /****************************************************************************
350 * Common IOCStatus values for all replies
351 ****************************************************************************/
353 case MPI2_IOCSTATUS_INVALID_FUNCTION
:
354 desc
= "invalid function";
356 case MPI2_IOCSTATUS_BUSY
:
359 case MPI2_IOCSTATUS_INVALID_SGL
:
360 desc
= "invalid sgl";
362 case MPI2_IOCSTATUS_INTERNAL_ERROR
:
363 desc
= "internal error";
365 case MPI2_IOCSTATUS_INVALID_VPID
:
366 desc
= "invalid vpid";
368 case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES
:
369 desc
= "insufficient resources";
371 case MPI2_IOCSTATUS_INVALID_FIELD
:
372 desc
= "invalid field";
374 case MPI2_IOCSTATUS_INVALID_STATE
:
375 desc
= "invalid state";
377 case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED
:
378 desc
= "op state not supported";
381 /****************************************************************************
382 * Config IOCStatus values
383 ****************************************************************************/
385 case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION
:
386 desc
= "config invalid action";
388 case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE
:
389 desc
= "config invalid type";
391 case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE
:
392 desc
= "config invalid page";
394 case MPI2_IOCSTATUS_CONFIG_INVALID_DATA
:
395 desc
= "config invalid data";
397 case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS
:
398 desc
= "config no defaults";
400 case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT
:
401 desc
= "config cant commit";
404 /****************************************************************************
406 ****************************************************************************/
408 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR
:
409 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE
:
410 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE
:
411 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN
:
412 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN
:
413 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR
:
414 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR
:
415 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED
:
416 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH
:
417 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED
:
418 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED
:
419 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED
:
422 /****************************************************************************
423 * For use by SCSI Initiator and SCSI Target end-to-end data protection
424 ****************************************************************************/
426 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR
:
427 desc
= "eedp guard error";
429 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR
:
430 desc
= "eedp ref tag error";
432 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR
:
433 desc
= "eedp app tag error";
436 /****************************************************************************
438 ****************************************************************************/
440 case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX
:
441 desc
= "target invalid io index";
443 case MPI2_IOCSTATUS_TARGET_ABORTED
:
444 desc
= "target aborted";
446 case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE
:
447 desc
= "target no conn retryable";
449 case MPI2_IOCSTATUS_TARGET_NO_CONNECTION
:
450 desc
= "target no connection";
452 case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH
:
453 desc
= "target xfer count mismatch";
455 case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR
:
456 desc
= "target data offset error";
458 case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA
:
459 desc
= "target too much write data";
461 case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT
:
462 desc
= "target iu too short";
464 case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT
:
465 desc
= "target ack nak timeout";
467 case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED
:
468 desc
= "target nak received";
471 /****************************************************************************
472 * Serial Attached SCSI values
473 ****************************************************************************/
475 case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED
:
476 desc
= "smp request failed";
478 case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN
:
479 desc
= "smp data overrun";
482 /****************************************************************************
483 * Diagnostic Buffer Post / Diagnostic Release values
484 ****************************************************************************/
486 case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
:
487 desc
= "diagnostic released";
496 switch (request_hdr
->Function
) {
497 case MPI2_FUNCTION_CONFIG
:
498 frame_sz
= sizeof(Mpi2ConfigRequest_t
) + ioc
->sge_size
;
499 func_str
= "config_page";
501 case MPI2_FUNCTION_SCSI_TASK_MGMT
:
502 frame_sz
= sizeof(Mpi2SCSITaskManagementRequest_t
);
503 func_str
= "task_mgmt";
505 case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL
:
506 frame_sz
= sizeof(Mpi2SasIoUnitControlRequest_t
);
507 func_str
= "sas_iounit_ctl";
509 case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR
:
510 frame_sz
= sizeof(Mpi2SepRequest_t
);
511 func_str
= "enclosure";
513 case MPI2_FUNCTION_IOC_INIT
:
514 frame_sz
= sizeof(Mpi2IOCInitRequest_t
);
515 func_str
= "ioc_init";
517 case MPI2_FUNCTION_PORT_ENABLE
:
518 frame_sz
= sizeof(Mpi2PortEnableRequest_t
);
519 func_str
= "port_enable";
521 case MPI2_FUNCTION_SMP_PASSTHROUGH
:
522 frame_sz
= sizeof(Mpi2SmpPassthroughRequest_t
) + ioc
->sge_size
;
523 func_str
= "smp_passthru";
527 func_str
= "unknown";
531 printk(MPT2SAS_WARN_FMT
"ioc_status: %s(0x%04x), request(0x%p),"
532 " (%s)\n", ioc
->name
, desc
, ioc_status
, request_hdr
, func_str
);
534 _debug_dump_mf(request_hdr
, frame_sz
/4);
538 * _base_display_event_data - verbose translation of firmware asyn events
539 * @ioc: per adapter object
540 * @mpi_reply: reply mf payload returned from firmware
545 _base_display_event_data(struct MPT2SAS_ADAPTER
*ioc
,
546 Mpi2EventNotificationReply_t
*mpi_reply
)
551 if (!(ioc
->logging_level
& MPT_DEBUG_EVENTS
))
554 event
= le16_to_cpu(mpi_reply
->Event
);
557 case MPI2_EVENT_LOG_DATA
:
560 case MPI2_EVENT_STATE_CHANGE
:
561 desc
= "Status Change";
563 case MPI2_EVENT_HARD_RESET_RECEIVED
:
564 desc
= "Hard Reset Received";
566 case MPI2_EVENT_EVENT_CHANGE
:
567 desc
= "Event Change";
569 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
:
570 desc
= "Device Status Change";
572 case MPI2_EVENT_IR_OPERATION_STATUS
:
573 if (!ioc
->hide_ir_msg
)
574 desc
= "IR Operation Status";
576 case MPI2_EVENT_SAS_DISCOVERY
:
578 Mpi2EventDataSasDiscovery_t
*event_data
=
579 (Mpi2EventDataSasDiscovery_t
*)mpi_reply
->EventData
;
580 printk(MPT2SAS_INFO_FMT
"Discovery: (%s)", ioc
->name
,
581 (event_data
->ReasonCode
== MPI2_EVENT_SAS_DISC_RC_STARTED
) ?
583 if (event_data
->DiscoveryStatus
)
584 printk("discovery_status(0x%08x)",
585 le32_to_cpu(event_data
->DiscoveryStatus
));
589 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
:
590 desc
= "SAS Broadcast Primitive";
592 case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE
:
593 desc
= "SAS Init Device Status Change";
595 case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW
:
596 desc
= "SAS Init Table Overflow";
598 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
:
599 desc
= "SAS Topology Change List";
601 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
:
602 desc
= "SAS Enclosure Device Status Change";
604 case MPI2_EVENT_IR_VOLUME
:
605 if (!ioc
->hide_ir_msg
)
608 case MPI2_EVENT_IR_PHYSICAL_DISK
:
609 if (!ioc
->hide_ir_msg
)
610 desc
= "IR Physical Disk";
612 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
:
613 if (!ioc
->hide_ir_msg
)
614 desc
= "IR Configuration Change List";
616 case MPI2_EVENT_LOG_ENTRY_ADDED
:
617 if (!ioc
->hide_ir_msg
)
618 desc
= "Log Entry Added";
625 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
, desc
);
630 * _base_sas_log_info - verbose translation of firmware log info
631 * @ioc: per adapter object
632 * @log_info: log info
637 _base_sas_log_info(struct MPT2SAS_ADAPTER
*ioc
, u32 log_info
)
648 union loginfo_type sas_loginfo
;
649 char *originator_str
= NULL
;
651 sas_loginfo
.loginfo
= log_info
;
652 if (sas_loginfo
.dw
.bus_type
!= 3 /*SAS*/)
655 /* each nexus loss loginfo */
656 if (log_info
== 0x31170000)
659 /* eat the loginfos associated with task aborts */
660 if (ioc
->ignore_loginfos
&& (log_info
== 0x30050000 || log_info
==
661 0x31140000 || log_info
== 0x31130000))
664 switch (sas_loginfo
.dw
.originator
) {
666 originator_str
= "IOP";
669 originator_str
= "PL";
672 if (!ioc
->hide_ir_msg
)
673 originator_str
= "IR";
675 originator_str
= "WarpDrive";
679 printk(MPT2SAS_WARN_FMT
"log_info(0x%08x): originator(%s), "
680 "code(0x%02x), sub_code(0x%04x)\n", ioc
->name
, log_info
,
681 originator_str
, sas_loginfo
.dw
.code
,
682 sas_loginfo
.dw
.subcode
);
686 * _base_display_reply_info -
687 * @ioc: per adapter object
688 * @smid: system request message index
689 * @msix_index: MSIX table index supplied by the OS
690 * @reply: reply message frame(lower 32bit addr)
695 _base_display_reply_info(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
698 MPI2DefaultReply_t
*mpi_reply
;
701 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
702 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
);
703 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
704 if ((ioc_status
& MPI2_IOCSTATUS_MASK
) &&
705 (ioc
->logging_level
& MPT_DEBUG_REPLY
)) {
706 _base_sas_ioc_info(ioc
, mpi_reply
,
707 mpt2sas_base_get_msg_frame(ioc
, smid
));
710 if (ioc_status
& MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE
)
711 _base_sas_log_info(ioc
, le32_to_cpu(mpi_reply
->IOCLogInfo
));
715 * mpt2sas_base_done - base internal command completion routine
716 * @ioc: per adapter object
717 * @smid: system request message index
718 * @msix_index: MSIX table index supplied by the OS
719 * @reply: reply message frame(lower 32bit addr)
721 * Return 1 meaning mf should be freed from _base_interrupt
722 * 0 means the mf is freed from this function.
725 mpt2sas_base_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
728 MPI2DefaultReply_t
*mpi_reply
;
730 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
731 if (mpi_reply
&& mpi_reply
->Function
== MPI2_FUNCTION_EVENT_ACK
)
734 if (ioc
->base_cmds
.status
== MPT2_CMD_NOT_USED
)
737 ioc
->base_cmds
.status
|= MPT2_CMD_COMPLETE
;
739 ioc
->base_cmds
.status
|= MPT2_CMD_REPLY_VALID
;
740 memcpy(ioc
->base_cmds
.reply
, mpi_reply
, mpi_reply
->MsgLength
*4);
742 ioc
->base_cmds
.status
&= ~MPT2_CMD_PENDING
;
744 complete(&ioc
->base_cmds
.done
);
749 * _base_async_event - main callback handler for firmware asyn events
750 * @ioc: per adapter object
751 * @msix_index: MSIX table index supplied by the OS
752 * @reply: reply message frame(lower 32bit addr)
754 * Return 1 meaning mf should be freed from _base_interrupt
755 * 0 means the mf is freed from this function.
758 _base_async_event(struct MPT2SAS_ADAPTER
*ioc
, u8 msix_index
, u32 reply
)
760 Mpi2EventNotificationReply_t
*mpi_reply
;
761 Mpi2EventAckRequest_t
*ack_request
;
764 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
767 if (mpi_reply
->Function
!= MPI2_FUNCTION_EVENT_NOTIFICATION
)
769 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
770 _base_display_event_data(ioc
, mpi_reply
);
772 if (!(mpi_reply
->AckRequired
& MPI2_EVENT_NOTIFICATION_ACK_REQUIRED
))
774 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
776 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
777 ioc
->name
, __func__
);
781 ack_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
782 memset(ack_request
, 0, sizeof(Mpi2EventAckRequest_t
));
783 ack_request
->Function
= MPI2_FUNCTION_EVENT_ACK
;
784 ack_request
->Event
= mpi_reply
->Event
;
785 ack_request
->EventContext
= mpi_reply
->EventContext
;
786 ack_request
->VF_ID
= 0; /* TODO */
787 ack_request
->VP_ID
= 0;
788 mpt2sas_base_put_smid_default(ioc
, smid
);
792 /* scsih callback handler */
793 mpt2sas_scsih_event_callback(ioc
, msix_index
, reply
);
795 /* ctl callback handler */
796 mpt2sas_ctl_event_callback(ioc
, msix_index
, reply
);
802 * _base_get_cb_idx - obtain the callback index
803 * @ioc: per adapter object
804 * @smid: system request message index
806 * Return callback index.
809 _base_get_cb_idx(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
814 if (smid
< ioc
->hi_priority_smid
) {
816 cb_idx
= ioc
->scsi_lookup
[i
].cb_idx
;
817 } else if (smid
< ioc
->internal_smid
) {
818 i
= smid
- ioc
->hi_priority_smid
;
819 cb_idx
= ioc
->hpr_lookup
[i
].cb_idx
;
820 } else if (smid
<= ioc
->hba_queue_depth
) {
821 i
= smid
- ioc
->internal_smid
;
822 cb_idx
= ioc
->internal_lookup
[i
].cb_idx
;
829 * _base_mask_interrupts - disable interrupts
830 * @ioc: per adapter object
832 * Disabling ResetIRQ, Reply and Doorbell Interrupts
837 _base_mask_interrupts(struct MPT2SAS_ADAPTER
*ioc
)
841 ioc
->mask_interrupts
= 1;
842 him_register
= readl(&ioc
->chip
->HostInterruptMask
);
843 him_register
|= MPI2_HIM_DIM
+ MPI2_HIM_RIM
+ MPI2_HIM_RESET_IRQ_MASK
;
844 writel(him_register
, &ioc
->chip
->HostInterruptMask
);
845 readl(&ioc
->chip
->HostInterruptMask
);
849 * _base_unmask_interrupts - enable interrupts
850 * @ioc: per adapter object
852 * Enabling only Reply Interrupts
857 _base_unmask_interrupts(struct MPT2SAS_ADAPTER
*ioc
)
861 him_register
= readl(&ioc
->chip
->HostInterruptMask
);
862 him_register
&= ~MPI2_HIM_RIM
;
863 writel(him_register
, &ioc
->chip
->HostInterruptMask
);
864 ioc
->mask_interrupts
= 0;
867 union reply_descriptor
{
876 * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
877 * @irq: irq number (not used)
878 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
879 * @r: pt_regs pointer (not used)
881 * Return IRQ_HANDLE if processed, else IRQ_NONE.
884 _base_interrupt(int irq
, void *bus_id
)
886 struct adapter_reply_queue
*reply_q
= bus_id
;
887 union reply_descriptor rd
;
889 u8 request_desript_type
;
893 u8 msix_index
= reply_q
->msix_index
;
894 struct MPT2SAS_ADAPTER
*ioc
= reply_q
->ioc
;
895 Mpi2ReplyDescriptorsUnion_t
*rpf
;
898 if (ioc
->mask_interrupts
)
901 if (!atomic_add_unless(&reply_q
->busy
, 1, 1))
904 rpf
= &reply_q
->reply_post_free
[reply_q
->reply_post_host_index
];
905 request_desript_type
= rpf
->Default
.ReplyFlags
906 & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK
;
907 if (request_desript_type
== MPI2_RPY_DESCRIPT_FLAGS_UNUSED
) {
908 atomic_dec(&reply_q
->busy
);
915 rd
.word
= le64_to_cpu(rpf
->Words
);
916 if (rd
.u
.low
== UINT_MAX
|| rd
.u
.high
== UINT_MAX
)
919 smid
= le16_to_cpu(rpf
->Default
.DescriptorTypeDependent1
);
920 if (request_desript_type
==
921 MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY
) {
923 (rpf
->AddressReply
.ReplyFrameAddress
);
924 if (reply
> ioc
->reply_dma_max_address
||
925 reply
< ioc
->reply_dma_min_address
)
927 } else if (request_desript_type
==
928 MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER
)
930 else if (request_desript_type
==
931 MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS
)
934 cb_idx
= _base_get_cb_idx(ioc
, smid
);
935 if (smid
&& cb_idx
!= 0xFF) {
936 rc
= mpt_callbacks
[cb_idx
](ioc
, smid
, msix_index
,
939 _base_display_reply_info(ioc
, smid
, msix_index
,
942 mpt2sas_base_free_smid(ioc
, smid
);
945 _base_async_event(ioc
, msix_index
, reply
);
947 /* reply free queue handling */
949 ioc
->reply_free_host_index
=
950 (ioc
->reply_free_host_index
==
951 (ioc
->reply_free_queue_depth
- 1)) ?
952 0 : ioc
->reply_free_host_index
+ 1;
953 ioc
->reply_free
[ioc
->reply_free_host_index
] =
956 writel(ioc
->reply_free_host_index
,
957 &ioc
->chip
->ReplyFreeHostIndex
);
962 rpf
->Words
= cpu_to_le64(ULLONG_MAX
);
963 reply_q
->reply_post_host_index
=
964 (reply_q
->reply_post_host_index
==
965 (ioc
->reply_post_queue_depth
- 1)) ? 0 :
966 reply_q
->reply_post_host_index
+ 1;
967 request_desript_type
=
968 reply_q
->reply_post_free
[reply_q
->reply_post_host_index
].
969 Default
.ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK
;
971 if (request_desript_type
== MPI2_RPY_DESCRIPT_FLAGS_UNUSED
)
973 if (!reply_q
->reply_post_host_index
)
974 rpf
= reply_q
->reply_post_free
;
981 if (!completed_cmds
) {
982 atomic_dec(&reply_q
->busy
);
986 if (ioc
->is_warpdrive
) {
987 writel(reply_q
->reply_post_host_index
,
988 ioc
->reply_post_host_index
[msix_index
]);
989 atomic_dec(&reply_q
->busy
);
992 writel(reply_q
->reply_post_host_index
| (msix_index
<<
993 MPI2_RPHI_MSIX_INDEX_SHIFT
), &ioc
->chip
->ReplyPostHostIndex
);
994 atomic_dec(&reply_q
->busy
);
999 * _base_is_controller_msix_enabled - is controller support muli-reply queues
1000 * @ioc: per adapter object
1004 _base_is_controller_msix_enabled(struct MPT2SAS_ADAPTER
*ioc
)
1006 return (ioc
->facts
.IOCCapabilities
&
1007 MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX
) && ioc
->msix_enable
;
1011 * mpt2sas_base_flush_reply_queues - flushing the MSIX reply queues
1012 * @ioc: per adapter object
1013 * Context: ISR conext
1015 * Called when a Task Management request has completed. We want
1016 * to flush the other reply queues so all the outstanding IO has been
1017 * completed back to OS before we process the TM completetion.
1022 mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER
*ioc
)
1024 struct adapter_reply_queue
*reply_q
;
1026 /* If MSIX capability is turned off
1027 * then multi-queues are not enabled
1029 if (!_base_is_controller_msix_enabled(ioc
))
1032 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
) {
1033 if (ioc
->shost_recovery
)
1035 /* TMs are on msix_index == 0 */
1036 if (reply_q
->msix_index
== 0)
1038 _base_interrupt(reply_q
->vector
, (void *)reply_q
);
1043 * mpt2sas_base_release_callback_handler - clear interrupt callback handler
1044 * @cb_idx: callback index
1049 mpt2sas_base_release_callback_handler(u8 cb_idx
)
1051 mpt_callbacks
[cb_idx
] = NULL
;
1055 * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
1056 * @cb_func: callback function
1061 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func
)
1065 for (cb_idx
= MPT_MAX_CALLBACKS
-1; cb_idx
; cb_idx
--)
1066 if (mpt_callbacks
[cb_idx
] == NULL
)
1069 mpt_callbacks
[cb_idx
] = cb_func
;
1074 * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
1079 mpt2sas_base_initialize_callback_handler(void)
1083 for (cb_idx
= 0; cb_idx
< MPT_MAX_CALLBACKS
; cb_idx
++)
1084 mpt2sas_base_release_callback_handler(cb_idx
);
1088 * mpt2sas_base_build_zero_len_sge - build zero length sg entry
1089 * @ioc: per adapter object
1090 * @paddr: virtual address for SGE
1092 * Create a zero length scatter gather entry to insure the IOCs hardware has
1093 * something to use if the target device goes brain dead and tries
1094 * to send data even when none is asked for.
1099 mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER
*ioc
, void *paddr
)
1101 u32 flags_length
= (u32
)((MPI2_SGE_FLAGS_LAST_ELEMENT
|
1102 MPI2_SGE_FLAGS_END_OF_BUFFER
| MPI2_SGE_FLAGS_END_OF_LIST
|
1103 MPI2_SGE_FLAGS_SIMPLE_ELEMENT
) <<
1104 MPI2_SGE_FLAGS_SHIFT
);
1105 ioc
->base_add_sg_single(paddr
, flags_length
, -1);
1109 * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
1110 * @paddr: virtual address for SGE
1111 * @flags_length: SGE flags and data transfer length
1112 * @dma_addr: Physical address
1117 _base_add_sg_single_32(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
)
1119 Mpi2SGESimple32_t
*sgel
= paddr
;
1121 flags_length
|= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING
|
1122 MPI2_SGE_FLAGS_SYSTEM_ADDRESS
) << MPI2_SGE_FLAGS_SHIFT
;
1123 sgel
->FlagsLength
= cpu_to_le32(flags_length
);
1124 sgel
->Address
= cpu_to_le32(dma_addr
);
1129 * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
1130 * @paddr: virtual address for SGE
1131 * @flags_length: SGE flags and data transfer length
1132 * @dma_addr: Physical address
1137 _base_add_sg_single_64(void *paddr
, u32 flags_length
, dma_addr_t dma_addr
)
1139 Mpi2SGESimple64_t
*sgel
= paddr
;
1141 flags_length
|= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING
|
1142 MPI2_SGE_FLAGS_SYSTEM_ADDRESS
) << MPI2_SGE_FLAGS_SHIFT
;
1143 sgel
->FlagsLength
= cpu_to_le32(flags_length
);
1144 sgel
->Address
= cpu_to_le64(dma_addr
);
1147 #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
1150 * _base_config_dma_addressing - set dma addressing
1151 * @ioc: per adapter object
1152 * @pdev: PCI device struct
1154 * Returns 0 for success, non-zero for failure.
1157 _base_config_dma_addressing(struct MPT2SAS_ADAPTER
*ioc
, struct pci_dev
*pdev
)
1162 if (sizeof(dma_addr_t
) > 4) {
1163 const uint64_t required_mask
=
1164 dma_get_required_mask(&pdev
->dev
);
1165 if ((required_mask
> DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev
,
1166 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev
,
1167 DMA_BIT_MASK(64))) {
1168 ioc
->base_add_sg_single
= &_base_add_sg_single_64
;
1169 ioc
->sge_size
= sizeof(Mpi2SGESimple64_t
);
1175 if (!pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))
1176 && !pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32))) {
1177 ioc
->base_add_sg_single
= &_base_add_sg_single_32
;
1178 ioc
->sge_size
= sizeof(Mpi2SGESimple32_t
);
1185 printk(MPT2SAS_INFO_FMT
"%s BIT PCI BUS DMA ADDRESSING SUPPORTED, "
1186 "total mem (%ld kB)\n", ioc
->name
, desc
, convert_to_kb(s
.totalram
));
1192 * _base_check_enable_msix - checks MSIX capabable.
1193 * @ioc: per adapter object
1195 * Check to see if card is capable of MSIX, and set number
1196 * of available msix vectors
1199 _base_check_enable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1202 u16 message_control
;
1205 base
= pci_find_capability(ioc
->pdev
, PCI_CAP_ID_MSIX
);
1207 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"msix not "
1208 "supported\n", ioc
->name
));
1212 /* get msix vector count */
1213 /* NUMA_IO not supported for older controllers */
1214 if (ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2004
||
1215 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2008
||
1216 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2108_1
||
1217 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2108_2
||
1218 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2108_3
||
1219 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2116_1
||
1220 ioc
->pdev
->device
== MPI2_MFGPAGE_DEVID_SAS2116_2
)
1221 ioc
->msix_vector_count
= 1;
1223 pci_read_config_word(ioc
->pdev
, base
+ 2, &message_control
);
1224 ioc
->msix_vector_count
= (message_control
& 0x3FF) + 1;
1226 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"msix is supported, "
1227 "vector_count(%d)\n", ioc
->name
, ioc
->msix_vector_count
));
1233 * _base_free_irq - free irq
1234 * @ioc: per adapter object
1236 * Freeing respective reply_queue from the list.
1239 _base_free_irq(struct MPT2SAS_ADAPTER
*ioc
)
1241 struct adapter_reply_queue
*reply_q
, *next
;
1243 if (list_empty(&ioc
->reply_queue_list
))
1246 list_for_each_entry_safe(reply_q
, next
, &ioc
->reply_queue_list
, list
) {
1247 list_del(&reply_q
->list
);
1248 synchronize_irq(reply_q
->vector
);
1249 free_irq(reply_q
->vector
, reply_q
);
1255 * _base_request_irq - request irq
1256 * @ioc: per adapter object
1257 * @index: msix index into vector table
1258 * @vector: irq vector
1260 * Inserting respective reply_queue into the list.
1263 _base_request_irq(struct MPT2SAS_ADAPTER
*ioc
, u8 index
, u32 vector
)
1265 struct adapter_reply_queue
*reply_q
;
1268 reply_q
= kzalloc(sizeof(struct adapter_reply_queue
), GFP_KERNEL
);
1270 printk(MPT2SAS_ERR_FMT
"unable to allocate memory %d!\n",
1271 ioc
->name
, (int)sizeof(struct adapter_reply_queue
));
1275 reply_q
->msix_index
= index
;
1276 reply_q
->vector
= vector
;
1277 atomic_set(&reply_q
->busy
, 0);
1278 if (ioc
->msix_enable
)
1279 snprintf(reply_q
->name
, MPT_NAME_LENGTH
, "%s%d-msix%d",
1280 MPT2SAS_DRIVER_NAME
, ioc
->id
, index
);
1282 snprintf(reply_q
->name
, MPT_NAME_LENGTH
, "%s%d",
1283 MPT2SAS_DRIVER_NAME
, ioc
->id
);
1284 r
= request_irq(vector
, _base_interrupt
, IRQF_SHARED
, reply_q
->name
,
1287 printk(MPT2SAS_ERR_FMT
"unable to allocate interrupt %d!\n",
1288 reply_q
->name
, vector
);
1293 INIT_LIST_HEAD(&reply_q
->list
);
1294 list_add_tail(&reply_q
->list
, &ioc
->reply_queue_list
);
1299 * _base_assign_reply_queues - assigning msix index for each cpu
1300 * @ioc: per adapter object
1302 * The enduser would need to set the affinity via /proc/irq/#/smp_affinity
1304 * It would nice if we could call irq_set_affinity, however it is not
1305 * an exported symbol
1308 _base_assign_reply_queues(struct MPT2SAS_ADAPTER
*ioc
)
1310 struct adapter_reply_queue
*reply_q
;
1312 int cpu_grouping
, loop
, grouping
, grouping_mod
;
1314 if (!_base_is_controller_msix_enabled(ioc
))
1317 memset(ioc
->cpu_msix_table
, 0, ioc
->cpu_msix_table_sz
);
1318 /* when there are more cpus than available msix vectors,
1319 * then group cpus togeather on same irq
1321 if (ioc
->cpu_count
> ioc
->msix_vector_count
) {
1322 grouping
= ioc
->cpu_count
/ ioc
->msix_vector_count
;
1323 grouping_mod
= ioc
->cpu_count
% ioc
->msix_vector_count
;
1324 if (grouping
< 2 || (grouping
== 2 && !grouping_mod
))
1326 else if (grouping
< 4 || (grouping
== 4 && !grouping_mod
))
1328 else if (grouping
< 8 || (grouping
== 8 && !grouping_mod
))
1336 reply_q
= list_entry(ioc
->reply_queue_list
.next
,
1337 struct adapter_reply_queue
, list
);
1338 for_each_online_cpu(cpu_id
) {
1339 if (!cpu_grouping
) {
1340 ioc
->cpu_msix_table
[cpu_id
] = reply_q
->msix_index
;
1341 reply_q
= list_entry(reply_q
->list
.next
,
1342 struct adapter_reply_queue
, list
);
1344 if (loop
< cpu_grouping
) {
1345 ioc
->cpu_msix_table
[cpu_id
] =
1346 reply_q
->msix_index
;
1349 reply_q
= list_entry(reply_q
->list
.next
,
1350 struct adapter_reply_queue
, list
);
1351 ioc
->cpu_msix_table
[cpu_id
] =
1352 reply_q
->msix_index
;
1360 * _base_disable_msix - disables msix
1361 * @ioc: per adapter object
1365 _base_disable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1367 if (ioc
->msix_enable
) {
1368 pci_disable_msix(ioc
->pdev
);
1369 ioc
->msix_enable
= 0;
1374 * _base_enable_msix - enables msix, failback to io_apic
1375 * @ioc: per adapter object
1379 _base_enable_msix(struct MPT2SAS_ADAPTER
*ioc
)
1381 struct msix_entry
*entries
, *a
;
1386 INIT_LIST_HEAD(&ioc
->reply_queue_list
);
1388 if (msix_disable
== -1 || msix_disable
== 0)
1394 if (_base_check_enable_msix(ioc
) != 0)
1397 ioc
->reply_queue_count
= min_t(int, ioc
->cpu_count
,
1398 ioc
->msix_vector_count
);
1400 entries
= kcalloc(ioc
->reply_queue_count
, sizeof(struct msix_entry
),
1403 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"kcalloc "
1404 "failed @ at %s:%d/%s() !!!\n", ioc
->name
, __FILE__
,
1405 __LINE__
, __func__
));
1409 for (i
= 0, a
= entries
; i
< ioc
->reply_queue_count
; i
++, a
++)
1412 r
= pci_enable_msix(ioc
->pdev
, entries
, ioc
->reply_queue_count
);
1414 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"pci_enable_msix "
1415 "failed (r=%d) !!!\n", ioc
->name
, r
));
1420 ioc
->msix_enable
= 1;
1421 for (i
= 0, a
= entries
; i
< ioc
->reply_queue_count
; i
++, a
++) {
1422 r
= _base_request_irq(ioc
, i
, a
->vector
);
1424 _base_free_irq(ioc
);
1425 _base_disable_msix(ioc
);
1434 /* failback to io_apic interrupt routing */
1437 r
= _base_request_irq(ioc
, 0, ioc
->pdev
->irq
);
1443 * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
1444 * @ioc: per adapter object
1446 * Returns 0 for success, non-zero for failure.
1449 mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER
*ioc
)
1451 struct pci_dev
*pdev
= ioc
->pdev
;
1457 struct adapter_reply_queue
*reply_q
;
1459 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n",
1460 ioc
->name
, __func__
));
1462 ioc
->bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
1463 if (pci_enable_device_mem(pdev
)) {
1464 printk(MPT2SAS_WARN_FMT
"pci_enable_device_mem: "
1465 "failed\n", ioc
->name
);
1470 if (pci_request_selected_regions(pdev
, ioc
->bars
,
1471 MPT2SAS_DRIVER_NAME
)) {
1472 printk(MPT2SAS_WARN_FMT
"pci_request_selected_regions: "
1473 "failed\n", ioc
->name
);
1478 /* AER (Advanced Error Reporting) hooks */
1479 pci_enable_pcie_error_reporting(pdev
);
1481 pci_set_master(pdev
);
1483 if (_base_config_dma_addressing(ioc
, pdev
) != 0) {
1484 printk(MPT2SAS_WARN_FMT
"no suitable DMA mask for %s\n",
1485 ioc
->name
, pci_name(pdev
));
1490 for (i
= 0, memap_sz
= 0, pio_sz
= 0 ; i
< DEVICE_COUNT_RESOURCE
; i
++) {
1491 if (pci_resource_flags(pdev
, i
) & IORESOURCE_IO
) {
1494 pio_chip
= (u64
)pci_resource_start(pdev
, i
);
1495 pio_sz
= pci_resource_len(pdev
, i
);
1499 /* verify memory resource is valid before using */
1500 if (pci_resource_flags(pdev
, i
) & IORESOURCE_MEM
) {
1501 ioc
->chip_phys
= pci_resource_start(pdev
, i
);
1502 chip_phys
= (u64
)ioc
->chip_phys
;
1503 memap_sz
= pci_resource_len(pdev
, i
);
1504 ioc
->chip
= ioremap(ioc
->chip_phys
, memap_sz
);
1505 if (ioc
->chip
== NULL
) {
1506 printk(MPT2SAS_ERR_FMT
"unable to map "
1507 "adapter memory!\n", ioc
->name
);
1515 _base_mask_interrupts(ioc
);
1516 r
= _base_enable_msix(ioc
);
1520 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
)
1521 printk(MPT2SAS_INFO_FMT
"%s: IRQ %d\n",
1522 reply_q
->name
, ((ioc
->msix_enable
) ? "PCI-MSI-X enabled" :
1523 "IO-APIC enabled"), reply_q
->vector
);
1525 printk(MPT2SAS_INFO_FMT
"iomem(0x%016llx), mapped(0x%p), size(%d)\n",
1526 ioc
->name
, (unsigned long long)chip_phys
, ioc
->chip
, memap_sz
);
1527 printk(MPT2SAS_INFO_FMT
"ioport(0x%016llx), size(%d)\n",
1528 ioc
->name
, (unsigned long long)pio_chip
, pio_sz
);
1530 /* Save PCI configuration state for recovery from PCI AER/EEH errors */
1531 pci_save_state(pdev
);
1539 pci_release_selected_regions(ioc
->pdev
, ioc
->bars
);
1540 pci_disable_pcie_error_reporting(pdev
);
1541 pci_disable_device(pdev
);
1546 * mpt2sas_base_get_msg_frame - obtain request mf pointer
1547 * @ioc: per adapter object
1548 * @smid: system request message index(smid zero is invalid)
1550 * Returns virt pointer to message frame.
1553 mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1555 return (void *)(ioc
->request
+ (smid
* ioc
->request_sz
));
1559 * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
1560 * @ioc: per adapter object
1561 * @smid: system request message index
1563 * Returns virt pointer to sense buffer.
1566 mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1568 return (void *)(ioc
->sense
+ ((smid
- 1) * SCSI_SENSE_BUFFERSIZE
));
1572 * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
1573 * @ioc: per adapter object
1574 * @smid: system request message index
1576 * Returns phys pointer to the low 32bit address of the sense buffer.
1579 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1581 return cpu_to_le32(ioc
->sense_dma
+
1582 ((smid
- 1) * SCSI_SENSE_BUFFERSIZE
));
1586 * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
1587 * @ioc: per adapter object
1588 * @phys_addr: lower 32 physical addr of the reply
1590 * Converts 32bit lower physical addr into a virt address.
1593 mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER
*ioc
, u32 phys_addr
)
1597 return ioc
->reply
+ (phys_addr
- (u32
)ioc
->reply_dma
);
1601 * mpt2sas_base_get_smid - obtain a free smid from internal queue
1602 * @ioc: per adapter object
1603 * @cb_idx: callback index
1605 * Returns smid (zero is invalid)
1608 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
)
1610 unsigned long flags
;
1611 struct request_tracker
*request
;
1614 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1615 if (list_empty(&ioc
->internal_free_list
)) {
1616 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1617 printk(MPT2SAS_ERR_FMT
"%s: smid not available\n",
1618 ioc
->name
, __func__
);
1622 request
= list_entry(ioc
->internal_free_list
.next
,
1623 struct request_tracker
, tracker_list
);
1624 request
->cb_idx
= cb_idx
;
1625 smid
= request
->smid
;
1626 list_del(&request
->tracker_list
);
1627 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1632 * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
1633 * @ioc: per adapter object
1634 * @cb_idx: callback index
1635 * @scmd: pointer to scsi command object
1637 * Returns smid (zero is invalid)
1640 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
,
1641 struct scsi_cmnd
*scmd
)
1643 unsigned long flags
;
1644 struct scsiio_tracker
*request
;
1647 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1648 if (list_empty(&ioc
->free_list
)) {
1649 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1650 printk(MPT2SAS_ERR_FMT
"%s: smid not available\n",
1651 ioc
->name
, __func__
);
1655 request
= list_entry(ioc
->free_list
.next
,
1656 struct scsiio_tracker
, tracker_list
);
1657 request
->scmd
= scmd
;
1658 request
->cb_idx
= cb_idx
;
1659 smid
= request
->smid
;
1660 list_del(&request
->tracker_list
);
1661 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1666 * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
1667 * @ioc: per adapter object
1668 * @cb_idx: callback index
1670 * Returns smid (zero is invalid)
1673 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER
*ioc
, u8 cb_idx
)
1675 unsigned long flags
;
1676 struct request_tracker
*request
;
1679 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1680 if (list_empty(&ioc
->hpr_free_list
)) {
1681 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1685 request
= list_entry(ioc
->hpr_free_list
.next
,
1686 struct request_tracker
, tracker_list
);
1687 request
->cb_idx
= cb_idx
;
1688 smid
= request
->smid
;
1689 list_del(&request
->tracker_list
);
1690 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1696 * mpt2sas_base_free_smid - put smid back on free_list
1697 * @ioc: per adapter object
1698 * @smid: system request message index
1703 mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1705 unsigned long flags
;
1707 struct chain_tracker
*chain_req
, *next
;
1709 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
1710 if (smid
< ioc
->hi_priority_smid
) {
1713 if (!list_empty(&ioc
->scsi_lookup
[i
].chain_list
)) {
1714 list_for_each_entry_safe(chain_req
, next
,
1715 &ioc
->scsi_lookup
[i
].chain_list
, tracker_list
) {
1716 list_del_init(&chain_req
->tracker_list
);
1717 list_add_tail(&chain_req
->tracker_list
,
1718 &ioc
->free_chain_list
);
1721 ioc
->scsi_lookup
[i
].cb_idx
= 0xFF;
1722 ioc
->scsi_lookup
[i
].scmd
= NULL
;
1723 ioc
->scsi_lookup
[i
].direct_io
= 0;
1724 list_add_tail(&ioc
->scsi_lookup
[i
].tracker_list
,
1726 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1729 * See _wait_for_commands_to_complete() call with regards
1732 if (ioc
->shost_recovery
&& ioc
->pending_io_count
) {
1733 if (ioc
->pending_io_count
== 1)
1734 wake_up(&ioc
->reset_wq
);
1735 ioc
->pending_io_count
--;
1738 } else if (smid
< ioc
->internal_smid
) {
1740 i
= smid
- ioc
->hi_priority_smid
;
1741 ioc
->hpr_lookup
[i
].cb_idx
= 0xFF;
1742 list_add_tail(&ioc
->hpr_lookup
[i
].tracker_list
,
1743 &ioc
->hpr_free_list
);
1744 } else if (smid
<= ioc
->hba_queue_depth
) {
1745 /* internal queue */
1746 i
= smid
- ioc
->internal_smid
;
1747 ioc
->internal_lookup
[i
].cb_idx
= 0xFF;
1748 list_add_tail(&ioc
->internal_lookup
[i
].tracker_list
,
1749 &ioc
->internal_free_list
);
1751 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
1755 * _base_writeq - 64 bit write to MMIO
1756 * @ioc: per adapter object
1758 * @addr: address in MMIO space
1759 * @writeq_lock: spin lock
1761 * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
1762 * care of 32 bit environment where its not quarenteed to send the entire word
1766 static inline void _base_writeq(__u64 b
, volatile void __iomem
*addr
,
1767 spinlock_t
*writeq_lock
)
1769 unsigned long flags
;
1770 __u64 data_out
= cpu_to_le64(b
);
1772 spin_lock_irqsave(writeq_lock
, flags
);
1773 writel((u32
)(data_out
), addr
);
1774 writel((u32
)(data_out
>> 32), (addr
+ 4));
1775 spin_unlock_irqrestore(writeq_lock
, flags
);
1778 static inline void _base_writeq(__u64 b
, volatile void __iomem
*addr
,
1779 spinlock_t
*writeq_lock
)
1781 writeq(cpu_to_le64(b
), addr
);
1786 _base_get_msix_index(struct MPT2SAS_ADAPTER
*ioc
)
1788 return ioc
->cpu_msix_table
[smp_processor_id()];
1792 * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
1793 * @ioc: per adapter object
1794 * @smid: system request message index
1795 * @handle: device handle
1800 mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u16 handle
)
1802 Mpi2RequestDescriptorUnion_t descriptor
;
1803 u64
*request
= (u64
*)&descriptor
;
1806 descriptor
.SCSIIO
.RequestFlags
= MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO
;
1807 descriptor
.SCSIIO
.MSIxIndex
= _base_get_msix_index(ioc
);
1808 descriptor
.SCSIIO
.SMID
= cpu_to_le16(smid
);
1809 descriptor
.SCSIIO
.DevHandle
= cpu_to_le16(handle
);
1810 descriptor
.SCSIIO
.LMID
= 0;
1811 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1812 &ioc
->scsi_lookup_lock
);
1817 * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
1818 * @ioc: per adapter object
1819 * @smid: system request message index
1824 mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1826 Mpi2RequestDescriptorUnion_t descriptor
;
1827 u64
*request
= (u64
*)&descriptor
;
1829 descriptor
.HighPriority
.RequestFlags
=
1830 MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
;
1831 descriptor
.HighPriority
.MSIxIndex
= 0;
1832 descriptor
.HighPriority
.SMID
= cpu_to_le16(smid
);
1833 descriptor
.HighPriority
.LMID
= 0;
1834 descriptor
.HighPriority
.Reserved1
= 0;
1835 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1836 &ioc
->scsi_lookup_lock
);
1840 * mpt2sas_base_put_smid_default - Default, primarily used for config pages
1841 * @ioc: per adapter object
1842 * @smid: system request message index
1847 mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
)
1849 Mpi2RequestDescriptorUnion_t descriptor
;
1850 u64
*request
= (u64
*)&descriptor
;
1852 descriptor
.Default
.RequestFlags
= MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE
;
1853 descriptor
.Default
.MSIxIndex
= _base_get_msix_index(ioc
);
1854 descriptor
.Default
.SMID
= cpu_to_le16(smid
);
1855 descriptor
.Default
.LMID
= 0;
1856 descriptor
.Default
.DescriptorTypeDependent
= 0;
1857 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1858 &ioc
->scsi_lookup_lock
);
1862 * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
1863 * @ioc: per adapter object
1864 * @smid: system request message index
1865 * @io_index: value used to track the IO
1870 mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
,
1873 Mpi2RequestDescriptorUnion_t descriptor
;
1874 u64
*request
= (u64
*)&descriptor
;
1876 descriptor
.SCSITarget
.RequestFlags
=
1877 MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET
;
1878 descriptor
.SCSITarget
.MSIxIndex
= _base_get_msix_index(ioc
);
1879 descriptor
.SCSITarget
.SMID
= cpu_to_le16(smid
);
1880 descriptor
.SCSITarget
.LMID
= 0;
1881 descriptor
.SCSITarget
.IoIndex
= cpu_to_le16(io_index
);
1882 _base_writeq(*request
, &ioc
->chip
->RequestDescriptorPostLow
,
1883 &ioc
->scsi_lookup_lock
);
1887 * _base_display_dell_branding - Disply branding string
1888 * @ioc: per adapter object
1893 _base_display_dell_branding(struct MPT2SAS_ADAPTER
*ioc
)
1895 char dell_branding
[MPT2SAS_DELL_BRANDING_SIZE
];
1897 if (ioc
->pdev
->subsystem_vendor
!= PCI_VENDOR_ID_DELL
)
1900 memset(dell_branding
, 0, MPT2SAS_DELL_BRANDING_SIZE
);
1901 switch (ioc
->pdev
->subsystem_device
) {
1902 case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID
:
1903 strncpy(dell_branding
, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING
,
1904 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1906 case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID
:
1907 strncpy(dell_branding
, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING
,
1908 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1910 case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID
:
1911 strncpy(dell_branding
,
1912 MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING
,
1913 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1915 case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID
:
1916 strncpy(dell_branding
,
1917 MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING
,
1918 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1920 case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID
:
1921 strncpy(dell_branding
,
1922 MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING
,
1923 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1925 case MPT2SAS_DELL_PERC_H200_SSDID
:
1926 strncpy(dell_branding
, MPT2SAS_DELL_PERC_H200_BRANDING
,
1927 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1929 case MPT2SAS_DELL_6GBPS_SAS_SSDID
:
1930 strncpy(dell_branding
, MPT2SAS_DELL_6GBPS_SAS_BRANDING
,
1931 MPT2SAS_DELL_BRANDING_SIZE
- 1);
1934 sprintf(dell_branding
, "0x%4X", ioc
->pdev
->subsystem_device
);
1938 printk(MPT2SAS_INFO_FMT
"%s: Vendor(0x%04X), Device(0x%04X),"
1939 " SSVID(0x%04X), SSDID(0x%04X)\n", ioc
->name
, dell_branding
,
1940 ioc
->pdev
->vendor
, ioc
->pdev
->device
, ioc
->pdev
->subsystem_vendor
,
1941 ioc
->pdev
->subsystem_device
);
1945 * _base_display_intel_branding - Display branding string
1946 * @ioc: per adapter object
1951 _base_display_intel_branding(struct MPT2SAS_ADAPTER
*ioc
)
1953 if (ioc
->pdev
->subsystem_vendor
!= PCI_VENDOR_ID_INTEL
)
1956 switch (ioc
->pdev
->device
) {
1957 case MPI2_MFGPAGE_DEVID_SAS2008
:
1958 switch (ioc
->pdev
->subsystem_device
) {
1959 case MPT2SAS_INTEL_RMS2LL080_SSDID
:
1960 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1961 MPT2SAS_INTEL_RMS2LL080_BRANDING
);
1963 case MPT2SAS_INTEL_RMS2LL040_SSDID
:
1964 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1965 MPT2SAS_INTEL_RMS2LL040_BRANDING
);
1967 case MPT2SAS_INTEL_RAMSDALE_SSDID
:
1968 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1969 MPT2SAS_INTEL_RAMSDALE_BRANDING
);
1974 case MPI2_MFGPAGE_DEVID_SAS2308_2
:
1975 switch (ioc
->pdev
->subsystem_device
) {
1976 case MPT2SAS_INTEL_RS25GB008_SSDID
:
1977 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1978 MPT2SAS_INTEL_RS25GB008_BRANDING
);
1980 case MPT2SAS_INTEL_RMS25JB080_SSDID
:
1981 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1982 MPT2SAS_INTEL_RMS25JB080_BRANDING
);
1984 case MPT2SAS_INTEL_RMS25JB040_SSDID
:
1985 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1986 MPT2SAS_INTEL_RMS25JB040_BRANDING
);
1988 case MPT2SAS_INTEL_RMS25KB080_SSDID
:
1989 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1990 MPT2SAS_INTEL_RMS25KB080_BRANDING
);
1992 case MPT2SAS_INTEL_RMS25KB040_SSDID
:
1993 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
1994 MPT2SAS_INTEL_RMS25KB040_BRANDING
);
2005 * _base_display_hp_branding - Display branding string
2006 * @ioc: per adapter object
2011 _base_display_hp_branding(struct MPT2SAS_ADAPTER
*ioc
)
2013 if (ioc
->pdev
->subsystem_vendor
!= MPT2SAS_HP_3PAR_SSVID
)
2016 switch (ioc
->pdev
->device
) {
2017 case MPI2_MFGPAGE_DEVID_SAS2004
:
2018 switch (ioc
->pdev
->subsystem_device
) {
2019 case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID
:
2020 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2021 MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING
);
2026 case MPI2_MFGPAGE_DEVID_SAS2308_2
:
2027 switch (ioc
->pdev
->subsystem_device
) {
2028 case MPT2SAS_HP_2_4_INTERNAL_SSDID
:
2029 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2030 MPT2SAS_HP_2_4_INTERNAL_BRANDING
);
2032 case MPT2SAS_HP_2_4_EXTERNAL_SSDID
:
2033 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2034 MPT2SAS_HP_2_4_EXTERNAL_BRANDING
);
2036 case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID
:
2037 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2038 MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING
);
2040 case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID
:
2041 printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2042 MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING
);
2053 * _base_display_ioc_capabilities - Disply IOC's capabilities.
2054 * @ioc: per adapter object
2059 _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER
*ioc
)
2063 u32 iounit_pg1_flags
;
2066 bios_version
= le32_to_cpu(ioc
->bios_pg3
.BiosVersion
);
2067 strncpy(desc
, ioc
->manu_pg0
.ChipName
, 16);
2068 printk(MPT2SAS_INFO_FMT
"%s: FWVersion(%02d.%02d.%02d.%02d), "
2069 "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
2071 (ioc
->facts
.FWVersion
.Word
& 0xFF000000) >> 24,
2072 (ioc
->facts
.FWVersion
.Word
& 0x00FF0000) >> 16,
2073 (ioc
->facts
.FWVersion
.Word
& 0x0000FF00) >> 8,
2074 ioc
->facts
.FWVersion
.Word
& 0x000000FF,
2075 ioc
->pdev
->revision
,
2076 (bios_version
& 0xFF000000) >> 24,
2077 (bios_version
& 0x00FF0000) >> 16,
2078 (bios_version
& 0x0000FF00) >> 8,
2079 bios_version
& 0x000000FF);
2081 _base_display_dell_branding(ioc
);
2082 _base_display_intel_branding(ioc
);
2083 _base_display_hp_branding(ioc
);
2085 printk(MPT2SAS_INFO_FMT
"Protocol=(", ioc
->name
);
2087 if (ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR
) {
2088 printk("Initiator");
2092 if (ioc
->facts
.ProtocolFlags
& MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET
) {
2093 printk("%sTarget", i
? "," : "");
2099 printk("Capabilities=(");
2101 if (!ioc
->hide_ir_msg
) {
2102 if (ioc
->facts
.IOCCapabilities
&
2103 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID
) {
2109 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_TLR
) {
2110 printk("%sTLR", i
? "," : "");
2114 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_MULTICAST
) {
2115 printk("%sMulticast", i
? "," : "");
2119 if (ioc
->facts
.IOCCapabilities
&
2120 MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET
) {
2121 printk("%sBIDI Target", i
? "," : "");
2125 if (ioc
->facts
.IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_EEDP
) {
2126 printk("%sEEDP", i
? "," : "");
2130 if (ioc
->facts
.IOCCapabilities
&
2131 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER
) {
2132 printk("%sSnapshot Buffer", i
? "," : "");
2136 if (ioc
->facts
.IOCCapabilities
&
2137 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER
) {
2138 printk("%sDiag Trace Buffer", i
? "," : "");
2142 if (ioc
->facts
.IOCCapabilities
&
2143 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER
) {
2144 printk(KERN_INFO
"%sDiag Extended Buffer", i
? "," : "");
2148 if (ioc
->facts
.IOCCapabilities
&
2149 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING
) {
2150 printk("%sTask Set Full", i
? "," : "");
2154 iounit_pg1_flags
= le32_to_cpu(ioc
->iounit_pg1
.Flags
);
2155 if (!(iounit_pg1_flags
& MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE
)) {
2156 printk("%sNCQ", i
? "," : "");
2164 * _base_update_missing_delay - change the missing delay timers
2165 * @ioc: per adapter object
2166 * @device_missing_delay: amount of time till device is reported missing
2167 * @io_missing_delay: interval IO is returned when there is a missing device
2171 * Passed on the command line, this function will modify the device missing
2172 * delay, as well as the io missing delay. This should be called at driver
2176 _base_update_missing_delay(struct MPT2SAS_ADAPTER
*ioc
,
2177 u16 device_missing_delay
, u8 io_missing_delay
)
2179 u16 dmd
, dmd_new
, dmd_orignal
;
2180 u8 io_missing_delay_original
;
2182 Mpi2SasIOUnitPage1_t
*sas_iounit_pg1
= NULL
;
2183 Mpi2ConfigReply_t mpi_reply
;
2187 mpt2sas_config_get_number_hba_phys(ioc
, &num_phys
);
2191 sz
= offsetof(Mpi2SasIOUnitPage1_t
, PhyData
) + (num_phys
*
2192 sizeof(Mpi2SasIOUnit1PhyData_t
));
2193 sas_iounit_pg1
= kzalloc(sz
, GFP_KERNEL
);
2194 if (!sas_iounit_pg1
) {
2195 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
2196 ioc
->name
, __FILE__
, __LINE__
, __func__
);
2199 if ((mpt2sas_config_get_sas_iounit_pg1(ioc
, &mpi_reply
,
2200 sas_iounit_pg1
, sz
))) {
2201 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
2202 ioc
->name
, __FILE__
, __LINE__
, __func__
);
2205 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) &
2206 MPI2_IOCSTATUS_MASK
;
2207 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
2208 printk(MPT2SAS_ERR_FMT
"failure at %s:%d/%s()!\n",
2209 ioc
->name
, __FILE__
, __LINE__
, __func__
);
2213 /* device missing delay */
2214 dmd
= sas_iounit_pg1
->ReportDeviceMissingDelay
;
2215 if (dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
)
2216 dmd
= (dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
) * 16;
2218 dmd
= dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
;
2220 if (device_missing_delay
> 0x7F) {
2221 dmd
= (device_missing_delay
> 0x7F0) ? 0x7F0 :
2222 device_missing_delay
;
2224 dmd
|= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
;
2226 dmd
= device_missing_delay
;
2227 sas_iounit_pg1
->ReportDeviceMissingDelay
= dmd
;
2229 /* io missing delay */
2230 io_missing_delay_original
= sas_iounit_pg1
->IODeviceMissingDelay
;
2231 sas_iounit_pg1
->IODeviceMissingDelay
= io_missing_delay
;
2233 if (!mpt2sas_config_set_sas_iounit_pg1(ioc
, &mpi_reply
, sas_iounit_pg1
,
2235 if (dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16
)
2237 MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
) * 16;
2240 dmd
& MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK
;
2241 printk(MPT2SAS_INFO_FMT
"device_missing_delay: old(%d), "
2242 "new(%d)\n", ioc
->name
, dmd_orignal
, dmd_new
);
2243 printk(MPT2SAS_INFO_FMT
"ioc_missing_delay: old(%d), "
2244 "new(%d)\n", ioc
->name
, io_missing_delay_original
,
2246 ioc
->device_missing_delay
= dmd_new
;
2247 ioc
->io_missing_delay
= io_missing_delay
;
2251 kfree(sas_iounit_pg1
);
2255 * _base_static_config_pages - static start of day config pages
2256 * @ioc: per adapter object
2261 _base_static_config_pages(struct MPT2SAS_ADAPTER
*ioc
)
2263 Mpi2ConfigReply_t mpi_reply
;
2264 u32 iounit_pg1_flags
;
2266 mpt2sas_config_get_manufacturing_pg0(ioc
, &mpi_reply
, &ioc
->manu_pg0
);
2267 if (ioc
->ir_firmware
)
2268 mpt2sas_config_get_manufacturing_pg10(ioc
, &mpi_reply
,
2270 mpt2sas_config_get_bios_pg2(ioc
, &mpi_reply
, &ioc
->bios_pg2
);
2271 mpt2sas_config_get_bios_pg3(ioc
, &mpi_reply
, &ioc
->bios_pg3
);
2272 mpt2sas_config_get_ioc_pg8(ioc
, &mpi_reply
, &ioc
->ioc_pg8
);
2273 mpt2sas_config_get_iounit_pg0(ioc
, &mpi_reply
, &ioc
->iounit_pg0
);
2274 mpt2sas_config_get_iounit_pg1(ioc
, &mpi_reply
, &ioc
->iounit_pg1
);
2275 _base_display_ioc_capabilities(ioc
);
2278 * Enable task_set_full handling in iounit_pg1 when the
2279 * facts capabilities indicate that its supported.
2281 iounit_pg1_flags
= le32_to_cpu(ioc
->iounit_pg1
.Flags
);
2282 if ((ioc
->facts
.IOCCapabilities
&
2283 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING
))
2285 ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING
;
2288 MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING
;
2289 ioc
->iounit_pg1
.Flags
= cpu_to_le32(iounit_pg1_flags
);
2290 mpt2sas_config_set_iounit_pg1(ioc
, &mpi_reply
, &ioc
->iounit_pg1
);
2295 * _base_release_memory_pools - release memory
2296 * @ioc: per adapter object
2298 * Free memory allocated from _base_allocate_memory_pools.
2303 _base_release_memory_pools(struct MPT2SAS_ADAPTER
*ioc
)
2307 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2311 pci_free_consistent(ioc
->pdev
, ioc
->request_dma_sz
,
2312 ioc
->request
, ioc
->request_dma
);
2313 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request_pool(0x%p)"
2314 ": free\n", ioc
->name
, ioc
->request
));
2315 ioc
->request
= NULL
;
2319 pci_pool_free(ioc
->sense_dma_pool
, ioc
->sense
, ioc
->sense_dma
);
2320 if (ioc
->sense_dma_pool
)
2321 pci_pool_destroy(ioc
->sense_dma_pool
);
2322 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"sense_pool(0x%p)"
2323 ": free\n", ioc
->name
, ioc
->sense
));
2328 pci_pool_free(ioc
->reply_dma_pool
, ioc
->reply
, ioc
->reply_dma
);
2329 if (ioc
->reply_dma_pool
)
2330 pci_pool_destroy(ioc
->reply_dma_pool
);
2331 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_pool(0x%p)"
2332 ": free\n", ioc
->name
, ioc
->reply
));
2336 if (ioc
->reply_free
) {
2337 pci_pool_free(ioc
->reply_free_dma_pool
, ioc
->reply_free
,
2338 ioc
->reply_free_dma
);
2339 if (ioc
->reply_free_dma_pool
)
2340 pci_pool_destroy(ioc
->reply_free_dma_pool
);
2341 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free_pool"
2342 "(0x%p): free\n", ioc
->name
, ioc
->reply_free
));
2343 ioc
->reply_free
= NULL
;
2346 if (ioc
->reply_post_free
) {
2347 pci_pool_free(ioc
->reply_post_free_dma_pool
,
2348 ioc
->reply_post_free
, ioc
->reply_post_free_dma
);
2349 if (ioc
->reply_post_free_dma_pool
)
2350 pci_pool_destroy(ioc
->reply_post_free_dma_pool
);
2351 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2352 "reply_post_free_pool(0x%p): free\n", ioc
->name
,
2353 ioc
->reply_post_free
));
2354 ioc
->reply_post_free
= NULL
;
2357 if (ioc
->config_page
) {
2358 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2359 "config_page(0x%p): free\n", ioc
->name
,
2361 pci_free_consistent(ioc
->pdev
, ioc
->config_page_sz
,
2362 ioc
->config_page
, ioc
->config_page_dma
);
2365 if (ioc
->scsi_lookup
) {
2366 free_pages((ulong
)ioc
->scsi_lookup
, ioc
->scsi_lookup_pages
);
2367 ioc
->scsi_lookup
= NULL
;
2369 kfree(ioc
->hpr_lookup
);
2370 kfree(ioc
->internal_lookup
);
2371 if (ioc
->chain_lookup
) {
2372 for (i
= 0; i
< ioc
->chain_depth
; i
++) {
2373 if (ioc
->chain_lookup
[i
].chain_buffer
)
2374 pci_pool_free(ioc
->chain_dma_pool
,
2375 ioc
->chain_lookup
[i
].chain_buffer
,
2376 ioc
->chain_lookup
[i
].chain_buffer_dma
);
2378 if (ioc
->chain_dma_pool
)
2379 pci_pool_destroy(ioc
->chain_dma_pool
);
2380 free_pages((ulong
)ioc
->chain_lookup
, ioc
->chain_pages
);
2381 ioc
->chain_lookup
= NULL
;
2387 * _base_allocate_memory_pools - allocate start of day memory pools
2388 * @ioc: per adapter object
2389 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2391 * Returns 0 success, anything else error
2394 _base_allocate_memory_pools(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
2396 struct mpt2sas_facts
*facts
;
2397 u16 max_sge_elements
;
2398 u16 chains_needed_per_io
;
2399 u32 sz
, total_sz
, reply_post_free_sz
;
2401 u16 max_request_credit
;
2404 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
2408 facts
= &ioc
->facts
;
2410 /* command line tunables for max sgl entries */
2411 if (max_sgl_entries
!= -1) {
2412 ioc
->shost
->sg_tablesize
= (max_sgl_entries
<
2413 MPT2SAS_SG_DEPTH
) ? max_sgl_entries
:
2416 ioc
->shost
->sg_tablesize
= MPT2SAS_SG_DEPTH
;
2419 /* command line tunables for max controller queue depth */
2420 if (max_queue_depth
!= -1)
2421 max_request_credit
= (max_queue_depth
< facts
->RequestCredit
)
2422 ? max_queue_depth
: facts
->RequestCredit
;
2424 max_request_credit
= min_t(u16
, facts
->RequestCredit
,
2425 MAX_HBA_QUEUE_DEPTH
);
2427 ioc
->hba_queue_depth
= max_request_credit
;
2428 ioc
->hi_priority_depth
= facts
->HighPriorityCredit
;
2429 ioc
->internal_depth
= ioc
->hi_priority_depth
+ 5;
2431 /* request frame size */
2432 ioc
->request_sz
= facts
->IOCRequestFrameSize
* 4;
2434 /* reply frame size */
2435 ioc
->reply_sz
= facts
->ReplyFrameSize
* 4;
2439 /* calculate number of sg elements left over in the 1st frame */
2440 max_sge_elements
= ioc
->request_sz
- ((sizeof(Mpi2SCSIIORequest_t
) -
2441 sizeof(Mpi2SGEIOUnion_t
)) + ioc
->sge_size
);
2442 ioc
->max_sges_in_main_message
= max_sge_elements
/ioc
->sge_size
;
2444 /* now do the same for a chain buffer */
2445 max_sge_elements
= ioc
->request_sz
- ioc
->sge_size
;
2446 ioc
->max_sges_in_chain_message
= max_sge_elements
/ioc
->sge_size
;
2448 ioc
->chain_offset_value_for_main_message
=
2449 ((sizeof(Mpi2SCSIIORequest_t
) - sizeof(Mpi2SGEIOUnion_t
)) +
2450 (ioc
->max_sges_in_chain_message
* ioc
->sge_size
)) / 4;
2453 * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
2455 chains_needed_per_io
= ((ioc
->shost
->sg_tablesize
-
2456 ioc
->max_sges_in_main_message
)/ioc
->max_sges_in_chain_message
)
2458 if (chains_needed_per_io
> facts
->MaxChainDepth
) {
2459 chains_needed_per_io
= facts
->MaxChainDepth
;
2460 ioc
->shost
->sg_tablesize
= min_t(u16
,
2461 ioc
->max_sges_in_main_message
+ (ioc
->max_sges_in_chain_message
2462 * chains_needed_per_io
), ioc
->shost
->sg_tablesize
);
2464 ioc
->chains_needed_per_io
= chains_needed_per_io
;
2466 /* reply free queue sizing - taking into account for 64 FW events */
2467 ioc
->reply_free_queue_depth
= ioc
->hba_queue_depth
+ 64;
2469 /* align the reply post queue on the next 16 count boundary */
2470 if (!ioc
->reply_free_queue_depth
% 16)
2471 ioc
->reply_post_queue_depth
= ioc
->reply_free_queue_depth
+ 16;
2473 ioc
->reply_post_queue_depth
= ioc
->reply_free_queue_depth
+
2474 32 - (ioc
->reply_free_queue_depth
% 16);
2475 if (ioc
->reply_post_queue_depth
>
2476 facts
->MaxReplyDescriptorPostQueueDepth
) {
2477 ioc
->reply_post_queue_depth
= min_t(u16
,
2478 (facts
->MaxReplyDescriptorPostQueueDepth
-
2479 (facts
->MaxReplyDescriptorPostQueueDepth
% 16)),
2480 (ioc
->hba_queue_depth
- (ioc
->hba_queue_depth
% 16)));
2481 ioc
->reply_free_queue_depth
= ioc
->reply_post_queue_depth
- 16;
2482 ioc
->hba_queue_depth
= ioc
->reply_free_queue_depth
- 64;
2486 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scatter gather: "
2487 "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
2488 "chains_per_io(%d)\n", ioc
->name
, ioc
->max_sges_in_main_message
,
2489 ioc
->max_sges_in_chain_message
, ioc
->shost
->sg_tablesize
,
2490 ioc
->chains_needed_per_io
));
2492 ioc
->scsiio_depth
= ioc
->hba_queue_depth
-
2493 ioc
->hi_priority_depth
- ioc
->internal_depth
;
2495 /* set the scsi host can_queue depth
2496 * with some internal commands that could be outstanding
2498 ioc
->shost
->can_queue
= ioc
->scsiio_depth
- (2);
2499 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scsi host: "
2500 "can_queue depth (%d)\n", ioc
->name
, ioc
->shost
->can_queue
));
2502 /* contiguous pool for request and chains, 16 byte align, one extra "
2505 ioc
->chain_depth
= ioc
->chains_needed_per_io
* ioc
->scsiio_depth
;
2506 sz
= ((ioc
->scsiio_depth
+ 1) * ioc
->request_sz
);
2508 /* hi-priority queue */
2509 sz
+= (ioc
->hi_priority_depth
* ioc
->request_sz
);
2511 /* internal queue */
2512 sz
+= (ioc
->internal_depth
* ioc
->request_sz
);
2514 ioc
->request_dma_sz
= sz
;
2515 ioc
->request
= pci_alloc_consistent(ioc
->pdev
, sz
, &ioc
->request_dma
);
2516 if (!ioc
->request
) {
2517 printk(MPT2SAS_ERR_FMT
"request pool: pci_alloc_consistent "
2518 "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2519 "total(%d kB)\n", ioc
->name
, ioc
->hba_queue_depth
,
2520 ioc
->chains_needed_per_io
, ioc
->request_sz
, sz
/1024);
2521 if (ioc
->scsiio_depth
< MPT2SAS_SAS_QUEUE_DEPTH
)
2524 ioc
->hba_queue_depth
= max_request_credit
- retry_sz
;
2525 goto retry_allocation
;
2529 printk(MPT2SAS_ERR_FMT
"request pool: pci_alloc_consistent "
2530 "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2531 "total(%d kb)\n", ioc
->name
, ioc
->hba_queue_depth
,
2532 ioc
->chains_needed_per_io
, ioc
->request_sz
, sz
/1024);
2535 /* hi-priority queue */
2536 ioc
->hi_priority
= ioc
->request
+ ((ioc
->scsiio_depth
+ 1) *
2538 ioc
->hi_priority_dma
= ioc
->request_dma
+ ((ioc
->scsiio_depth
+ 1) *
2541 /* internal queue */
2542 ioc
->internal
= ioc
->hi_priority
+ (ioc
->hi_priority_depth
*
2544 ioc
->internal_dma
= ioc
->hi_priority_dma
+ (ioc
->hi_priority_depth
*
2548 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request pool(0x%p): "
2549 "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
,
2550 ioc
->request
, ioc
->hba_queue_depth
, ioc
->request_sz
,
2551 (ioc
->hba_queue_depth
* ioc
->request_sz
)/1024));
2552 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request pool: dma(0x%llx)\n",
2553 ioc
->name
, (unsigned long long) ioc
->request_dma
));
2556 sz
= ioc
->scsiio_depth
* sizeof(struct scsiio_tracker
);
2557 ioc
->scsi_lookup_pages
= get_order(sz
);
2558 ioc
->scsi_lookup
= (struct scsiio_tracker
*)__get_free_pages(
2559 GFP_KERNEL
, ioc
->scsi_lookup_pages
);
2560 if (!ioc
->scsi_lookup
) {
2561 printk(MPT2SAS_ERR_FMT
"scsi_lookup: get_free_pages failed, "
2562 "sz(%d)\n", ioc
->name
, (int)sz
);
2566 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"scsiio(0x%p): "
2567 "depth(%d)\n", ioc
->name
, ioc
->request
,
2568 ioc
->scsiio_depth
));
2570 ioc
->chain_depth
= min_t(u32
, ioc
->chain_depth
, MAX_CHAIN_DEPTH
);
2571 sz
= ioc
->chain_depth
* sizeof(struct chain_tracker
);
2572 ioc
->chain_pages
= get_order(sz
);
2574 ioc
->chain_lookup
= (struct chain_tracker
*)__get_free_pages(
2575 GFP_KERNEL
, ioc
->chain_pages
);
2576 if (!ioc
->chain_lookup
) {
2577 printk(MPT2SAS_ERR_FMT
"chain_lookup: get_free_pages failed, "
2578 "sz(%d)\n", ioc
->name
, (int)sz
);
2581 ioc
->chain_dma_pool
= pci_pool_create("chain pool", ioc
->pdev
,
2582 ioc
->request_sz
, 16, 0);
2583 if (!ioc
->chain_dma_pool
) {
2584 printk(MPT2SAS_ERR_FMT
"chain_dma_pool: pci_pool_create "
2585 "failed\n", ioc
->name
);
2588 for (i
= 0; i
< ioc
->chain_depth
; i
++) {
2589 ioc
->chain_lookup
[i
].chain_buffer
= pci_pool_alloc(
2590 ioc
->chain_dma_pool
, GFP_KERNEL
,
2591 &ioc
->chain_lookup
[i
].chain_buffer_dma
);
2592 if (!ioc
->chain_lookup
[i
].chain_buffer
) {
2593 ioc
->chain_depth
= i
;
2596 total_sz
+= ioc
->request_sz
;
2599 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"chain pool depth"
2600 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
,
2601 ioc
->chain_depth
, ioc
->request_sz
, ((ioc
->chain_depth
*
2602 ioc
->request_sz
))/1024));
2604 /* initialize hi-priority queue smid's */
2605 ioc
->hpr_lookup
= kcalloc(ioc
->hi_priority_depth
,
2606 sizeof(struct request_tracker
), GFP_KERNEL
);
2607 if (!ioc
->hpr_lookup
) {
2608 printk(MPT2SAS_ERR_FMT
"hpr_lookup: kcalloc failed\n",
2612 ioc
->hi_priority_smid
= ioc
->scsiio_depth
+ 1;
2613 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"hi_priority(0x%p): "
2614 "depth(%d), start smid(%d)\n", ioc
->name
, ioc
->hi_priority
,
2615 ioc
->hi_priority_depth
, ioc
->hi_priority_smid
));
2617 /* initialize internal queue smid's */
2618 ioc
->internal_lookup
= kcalloc(ioc
->internal_depth
,
2619 sizeof(struct request_tracker
), GFP_KERNEL
);
2620 if (!ioc
->internal_lookup
) {
2621 printk(MPT2SAS_ERR_FMT
"internal_lookup: kcalloc failed\n",
2625 ioc
->internal_smid
= ioc
->hi_priority_smid
+ ioc
->hi_priority_depth
;
2626 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"internal(0x%p): "
2627 "depth(%d), start smid(%d)\n", ioc
->name
, ioc
->internal
,
2628 ioc
->internal_depth
, ioc
->internal_smid
));
2630 /* sense buffers, 4 byte align */
2631 sz
= ioc
->scsiio_depth
* SCSI_SENSE_BUFFERSIZE
;
2632 ioc
->sense_dma_pool
= pci_pool_create("sense pool", ioc
->pdev
, sz
, 4,
2634 if (!ioc
->sense_dma_pool
) {
2635 printk(MPT2SAS_ERR_FMT
"sense pool: pci_pool_create failed\n",
2639 ioc
->sense
= pci_pool_alloc(ioc
->sense_dma_pool
, GFP_KERNEL
,
2642 printk(MPT2SAS_ERR_FMT
"sense pool: pci_pool_alloc failed\n",
2646 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
2647 "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
2648 "(%d kB)\n", ioc
->name
, ioc
->sense
, ioc
->scsiio_depth
,
2649 SCSI_SENSE_BUFFERSIZE
, sz
/1024));
2650 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"sense_dma(0x%llx)\n",
2651 ioc
->name
, (unsigned long long)ioc
->sense_dma
));
2654 /* reply pool, 4 byte align */
2655 sz
= ioc
->reply_free_queue_depth
* ioc
->reply_sz
;
2656 ioc
->reply_dma_pool
= pci_pool_create("reply pool", ioc
->pdev
, sz
, 4,
2658 if (!ioc
->reply_dma_pool
) {
2659 printk(MPT2SAS_ERR_FMT
"reply pool: pci_pool_create failed\n",
2663 ioc
->reply
= pci_pool_alloc(ioc
->reply_dma_pool
, GFP_KERNEL
,
2666 printk(MPT2SAS_ERR_FMT
"reply pool: pci_pool_alloc failed\n",
2670 ioc
->reply_dma_min_address
= (u32
)(ioc
->reply_dma
);
2671 ioc
->reply_dma_max_address
= (u32
)(ioc
->reply_dma
) + sz
;
2672 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply pool(0x%p): depth"
2673 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc
->name
, ioc
->reply
,
2674 ioc
->reply_free_queue_depth
, ioc
->reply_sz
, sz
/1024));
2675 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_dma(0x%llx)\n",
2676 ioc
->name
, (unsigned long long)ioc
->reply_dma
));
2679 /* reply free queue, 16 byte align */
2680 sz
= ioc
->reply_free_queue_depth
* 4;
2681 ioc
->reply_free_dma_pool
= pci_pool_create("reply_free pool",
2682 ioc
->pdev
, sz
, 16, 0);
2683 if (!ioc
->reply_free_dma_pool
) {
2684 printk(MPT2SAS_ERR_FMT
"reply_free pool: pci_pool_create "
2685 "failed\n", ioc
->name
);
2688 ioc
->reply_free
= pci_pool_alloc(ioc
->reply_free_dma_pool
, GFP_KERNEL
,
2689 &ioc
->reply_free_dma
);
2690 if (!ioc
->reply_free
) {
2691 printk(MPT2SAS_ERR_FMT
"reply_free pool: pci_pool_alloc "
2692 "failed\n", ioc
->name
);
2695 memset(ioc
->reply_free
, 0, sz
);
2696 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free pool(0x%p): "
2697 "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc
->name
,
2698 ioc
->reply_free
, ioc
->reply_free_queue_depth
, 4, sz
/1024));
2699 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_free_dma"
2700 "(0x%llx)\n", ioc
->name
, (unsigned long long)ioc
->reply_free_dma
));
2703 /* reply post queue, 16 byte align */
2704 reply_post_free_sz
= ioc
->reply_post_queue_depth
*
2705 sizeof(Mpi2DefaultReplyDescriptor_t
);
2706 if (_base_is_controller_msix_enabled(ioc
))
2707 sz
= reply_post_free_sz
* ioc
->reply_queue_count
;
2709 sz
= reply_post_free_sz
;
2710 ioc
->reply_post_free_dma_pool
= pci_pool_create("reply_post_free pool",
2711 ioc
->pdev
, sz
, 16, 0);
2712 if (!ioc
->reply_post_free_dma_pool
) {
2713 printk(MPT2SAS_ERR_FMT
"reply_post_free pool: pci_pool_create "
2714 "failed\n", ioc
->name
);
2717 ioc
->reply_post_free
= pci_pool_alloc(ioc
->reply_post_free_dma_pool
,
2718 GFP_KERNEL
, &ioc
->reply_post_free_dma
);
2719 if (!ioc
->reply_post_free
) {
2720 printk(MPT2SAS_ERR_FMT
"reply_post_free pool: pci_pool_alloc "
2721 "failed\n", ioc
->name
);
2724 memset(ioc
->reply_post_free
, 0, sz
);
2725 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply post free pool"
2726 "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
2727 ioc
->name
, ioc
->reply_post_free
, ioc
->reply_post_queue_depth
, 8,
2729 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"reply_post_free_dma = "
2730 "(0x%llx)\n", ioc
->name
, (unsigned long long)
2731 ioc
->reply_post_free_dma
));
2734 ioc
->config_page_sz
= 512;
2735 ioc
->config_page
= pci_alloc_consistent(ioc
->pdev
,
2736 ioc
->config_page_sz
, &ioc
->config_page_dma
);
2737 if (!ioc
->config_page
) {
2738 printk(MPT2SAS_ERR_FMT
"config page: pci_pool_alloc "
2739 "failed\n", ioc
->name
);
2742 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"config page(0x%p): size"
2743 "(%d)\n", ioc
->name
, ioc
->config_page
, ioc
->config_page_sz
));
2744 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"config_page_dma"
2745 "(0x%llx)\n", ioc
->name
, (unsigned long long)ioc
->config_page_dma
));
2746 total_sz
+= ioc
->config_page_sz
;
2748 printk(MPT2SAS_INFO_FMT
"Allocated physical memory: size(%d kB)\n",
2749 ioc
->name
, total_sz
/1024);
2750 printk(MPT2SAS_INFO_FMT
"Current Controller Queue Depth(%d), "
2751 "Max Controller Queue Depth(%d)\n",
2752 ioc
->name
, ioc
->shost
->can_queue
, facts
->RequestCredit
);
2753 printk(MPT2SAS_INFO_FMT
"Scatter Gather Elements per IO(%d)\n",
2754 ioc
->name
, ioc
->shost
->sg_tablesize
);
2763 * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
2764 * @ioc: Pointer to MPT_ADAPTER structure
2765 * @cooked: Request raw or cooked IOC state
2767 * Returns all IOC Doorbell register bits if cooked==0, else just the
2768 * Doorbell bits in MPI_IOC_STATE_MASK.
2771 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER
*ioc
, int cooked
)
2775 s
= readl(&ioc
->chip
->Doorbell
);
2776 sc
= s
& MPI2_IOC_STATE_MASK
;
2777 return cooked
? sc
: s
;
2781 * _base_wait_on_iocstate - waiting on a particular ioc state
2782 * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
2783 * @timeout: timeout in second
2784 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2786 * Returns 0 for success, non-zero for failure.
2789 _base_wait_on_iocstate(struct MPT2SAS_ADAPTER
*ioc
, u32 ioc_state
, int timeout
,
2796 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2798 current_state
= mpt2sas_base_get_iocstate(ioc
, 1);
2799 if (current_state
== ioc_state
)
2801 if (count
&& current_state
== MPI2_IOC_STATE_FAULT
)
2803 if (sleep_flag
== CAN_SLEEP
)
2810 return current_state
;
2814 * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
2815 * a write to the doorbell)
2816 * @ioc: per adapter object
2817 * @timeout: timeout in second
2818 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2820 * Returns 0 for success, non-zero for failure.
2822 * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
2825 _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2832 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2834 int_status
= readl(&ioc
->chip
->HostInterruptStatus
);
2835 if (int_status
& MPI2_HIS_IOC2SYS_DB_STATUS
) {
2836 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
2837 "successful count(%d), timeout(%d)\n", ioc
->name
,
2838 __func__
, count
, timeout
));
2841 if (sleep_flag
== CAN_SLEEP
)
2848 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2849 "int_status(%x)!\n", ioc
->name
, __func__
, count
, int_status
);
2854 * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
2855 * @ioc: per adapter object
2856 * @timeout: timeout in second
2857 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2859 * Returns 0 for success, non-zero for failure.
2861 * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
2865 _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2873 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2875 int_status
= readl(&ioc
->chip
->HostInterruptStatus
);
2876 if (!(int_status
& MPI2_HIS_SYS2IOC_DB_STATUS
)) {
2877 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
2878 "successful count(%d), timeout(%d)\n", ioc
->name
,
2879 __func__
, count
, timeout
));
2881 } else if (int_status
& MPI2_HIS_IOC2SYS_DB_STATUS
) {
2882 doorbell
= readl(&ioc
->chip
->Doorbell
);
2883 if ((doorbell
& MPI2_IOC_STATE_MASK
) ==
2884 MPI2_IOC_STATE_FAULT
) {
2885 mpt2sas_base_fault_info(ioc
, doorbell
);
2888 } else if (int_status
== 0xFFFFFFFF)
2891 if (sleep_flag
== CAN_SLEEP
)
2899 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2900 "int_status(%x)!\n", ioc
->name
, __func__
, count
, int_status
);
2905 * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
2906 * @ioc: per adapter object
2907 * @timeout: timeout in second
2908 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2910 * Returns 0 for success, non-zero for failure.
2914 _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER
*ioc
, int timeout
,
2921 cntdn
= (sleep_flag
== CAN_SLEEP
) ? 1000*timeout
: 2000*timeout
;
2923 doorbell_reg
= readl(&ioc
->chip
->Doorbell
);
2924 if (!(doorbell_reg
& MPI2_DOORBELL_USED
)) {
2925 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
2926 "successful count(%d), timeout(%d)\n", ioc
->name
,
2927 __func__
, count
, timeout
));
2930 if (sleep_flag
== CAN_SLEEP
)
2937 printk(MPT2SAS_ERR_FMT
"%s: failed due to timeout count(%d), "
2938 "doorbell_reg(%x)!\n", ioc
->name
, __func__
, count
, doorbell_reg
);
2943 * _base_send_ioc_reset - send doorbell reset
2944 * @ioc: per adapter object
2945 * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
2946 * @timeout: timeout in second
2947 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2949 * Returns 0 for success, non-zero for failure.
2952 _base_send_ioc_reset(struct MPT2SAS_ADAPTER
*ioc
, u8 reset_type
, int timeout
,
2958 if (reset_type
!= MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
) {
2959 printk(MPT2SAS_ERR_FMT
"%s: unknown reset_type\n",
2960 ioc
->name
, __func__
);
2964 if (!(ioc
->facts
.IOCCapabilities
&
2965 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY
))
2968 printk(MPT2SAS_INFO_FMT
"sending message unit reset !!\n", ioc
->name
);
2970 writel(reset_type
<< MPI2_DOORBELL_FUNCTION_SHIFT
,
2971 &ioc
->chip
->Doorbell
);
2972 if ((_base_wait_for_doorbell_ack(ioc
, 15, sleep_flag
))) {
2976 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_READY
,
2977 timeout
, sleep_flag
);
2979 printk(MPT2SAS_ERR_FMT
"%s: failed going to ready state "
2980 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
2985 printk(MPT2SAS_INFO_FMT
"message unit reset: %s\n",
2986 ioc
->name
, ((r
== 0) ? "SUCCESS" : "FAILED"));
2991 * _base_handshake_req_reply_wait - send request thru doorbell interface
2992 * @ioc: per adapter object
2993 * @request_bytes: request length
2994 * @request: pointer having request payload
2995 * @reply_bytes: reply length
2996 * @reply: pointer to reply payload
2997 * @timeout: timeout in second
2998 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3000 * Returns 0 for success, non-zero for failure.
3003 _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER
*ioc
, int request_bytes
,
3004 u32
*request
, int reply_bytes
, u16
*reply
, int timeout
, int sleep_flag
)
3006 MPI2DefaultReply_t
*default_reply
= (MPI2DefaultReply_t
*)reply
;
3012 /* make sure doorbell is not in use */
3013 if ((readl(&ioc
->chip
->Doorbell
) & MPI2_DOORBELL_USED
)) {
3014 printk(MPT2SAS_ERR_FMT
"doorbell is in use "
3015 " (line=%d)\n", ioc
->name
, __LINE__
);
3019 /* clear pending doorbell interrupts from previous state changes */
3020 if (readl(&ioc
->chip
->HostInterruptStatus
) &
3021 MPI2_HIS_IOC2SYS_DB_STATUS
)
3022 writel(0, &ioc
->chip
->HostInterruptStatus
);
3024 /* send message to ioc */
3025 writel(((MPI2_FUNCTION_HANDSHAKE
<<MPI2_DOORBELL_FUNCTION_SHIFT
) |
3026 ((request_bytes
/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT
)),
3027 &ioc
->chip
->Doorbell
);
3029 if ((_base_wait_for_doorbell_int(ioc
, 5, NO_SLEEP
))) {
3030 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3031 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
3034 writel(0, &ioc
->chip
->HostInterruptStatus
);
3036 if ((_base_wait_for_doorbell_ack(ioc
, 5, sleep_flag
))) {
3037 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3038 "ack failed (line=%d)\n", ioc
->name
, __LINE__
);
3042 /* send message 32-bits at a time */
3043 for (i
= 0, failed
= 0; i
< request_bytes
/4 && !failed
; i
++) {
3044 writel(cpu_to_le32(request
[i
]), &ioc
->chip
->Doorbell
);
3045 if ((_base_wait_for_doorbell_ack(ioc
, 5, sleep_flag
)))
3050 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3051 "sending request failed (line=%d)\n", ioc
->name
, __LINE__
);
3055 /* now wait for the reply */
3056 if ((_base_wait_for_doorbell_int(ioc
, timeout
, sleep_flag
))) {
3057 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3058 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
3062 /* read the first two 16-bits, it gives the total length of the reply */
3063 reply
[0] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
3064 & MPI2_DOORBELL_DATA_MASK
);
3065 writel(0, &ioc
->chip
->HostInterruptStatus
);
3066 if ((_base_wait_for_doorbell_int(ioc
, 5, sleep_flag
))) {
3067 printk(MPT2SAS_ERR_FMT
"doorbell handshake "
3068 "int failed (line=%d)\n", ioc
->name
, __LINE__
);
3071 reply
[1] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
3072 & MPI2_DOORBELL_DATA_MASK
);
3073 writel(0, &ioc
->chip
->HostInterruptStatus
);
3075 for (i
= 2; i
< default_reply
->MsgLength
* 2; i
++) {
3076 if ((_base_wait_for_doorbell_int(ioc
, 5, sleep_flag
))) {
3077 printk(MPT2SAS_ERR_FMT
"doorbell "
3078 "handshake int failed (line=%d)\n", ioc
->name
,
3082 if (i
>= reply_bytes
/2) /* overflow case */
3083 dummy
= readl(&ioc
->chip
->Doorbell
);
3085 reply
[i
] = le16_to_cpu(readl(&ioc
->chip
->Doorbell
)
3086 & MPI2_DOORBELL_DATA_MASK
);
3087 writel(0, &ioc
->chip
->HostInterruptStatus
);
3090 _base_wait_for_doorbell_int(ioc
, 5, sleep_flag
);
3091 if (_base_wait_for_doorbell_not_used(ioc
, 5, sleep_flag
) != 0) {
3092 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"doorbell is in use "
3093 " (line=%d)\n", ioc
->name
, __LINE__
));
3095 writel(0, &ioc
->chip
->HostInterruptStatus
);
3097 if (ioc
->logging_level
& MPT_DEBUG_INIT
) {
3098 mfp
= (__le32
*)reply
;
3099 printk(KERN_INFO
"\toffset:data\n");
3100 for (i
= 0; i
< reply_bytes
/4; i
++)
3101 printk(KERN_INFO
"\t[0x%02x]:%08x\n", i
*4,
3102 le32_to_cpu(mfp
[i
]));
3108 * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
3109 * @ioc: per adapter object
3110 * @mpi_reply: the reply payload from FW
3111 * @mpi_request: the request payload sent to FW
3113 * The SAS IO Unit Control Request message allows the host to perform low-level
3114 * operations, such as resets on the PHYs of the IO Unit, also allows the host
3115 * to obtain the IOC assigned device handles for a device if it has other
3116 * identifying information about the device, in addition allows the host to
3117 * remove IOC resources associated with the device.
3119 * Returns 0 for success, non-zero for failure.
3122 mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER
*ioc
,
3123 Mpi2SasIoUnitControlReply_t
*mpi_reply
,
3124 Mpi2SasIoUnitControlRequest_t
*mpi_request
)
3128 unsigned long timeleft
;
3132 u16 wait_state_count
;
3134 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3137 mutex_lock(&ioc
->base_cmds
.mutex
);
3139 if (ioc
->base_cmds
.status
!= MPT2_CMD_NOT_USED
) {
3140 printk(MPT2SAS_ERR_FMT
"%s: base_cmd in use\n",
3141 ioc
->name
, __func__
);
3146 wait_state_count
= 0;
3147 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3148 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3149 if (wait_state_count
++ == 10) {
3150 printk(MPT2SAS_ERR_FMT
3151 "%s: failed due to ioc not operational\n",
3152 ioc
->name
, __func__
);
3157 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3158 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
3159 "operational state(count=%d)\n", ioc
->name
,
3160 __func__
, wait_state_count
);
3163 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3165 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3166 ioc
->name
, __func__
);
3172 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3173 request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3174 ioc
->base_cmds
.smid
= smid
;
3175 memcpy(request
, mpi_request
, sizeof(Mpi2SasIoUnitControlRequest_t
));
3176 if (mpi_request
->Operation
== MPI2_SAS_OP_PHY_HARD_RESET
||
3177 mpi_request
->Operation
== MPI2_SAS_OP_PHY_LINK_RESET
)
3178 ioc
->ioc_link_reset_in_progress
= 1;
3179 init_completion(&ioc
->base_cmds
.done
);
3180 mpt2sas_base_put_smid_default(ioc
, smid
);
3181 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
3182 msecs_to_jiffies(10000));
3183 if ((mpi_request
->Operation
== MPI2_SAS_OP_PHY_HARD_RESET
||
3184 mpi_request
->Operation
== MPI2_SAS_OP_PHY_LINK_RESET
) &&
3185 ioc
->ioc_link_reset_in_progress
)
3186 ioc
->ioc_link_reset_in_progress
= 0;
3187 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3188 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3189 ioc
->name
, __func__
);
3190 _debug_dump_mf(mpi_request
,
3191 sizeof(Mpi2SasIoUnitControlRequest_t
)/4);
3192 if (!(ioc
->base_cmds
.status
& MPT2_CMD_RESET
))
3194 goto issue_host_reset
;
3196 if (ioc
->base_cmds
.status
& MPT2_CMD_REPLY_VALID
)
3197 memcpy(mpi_reply
, ioc
->base_cmds
.reply
,
3198 sizeof(Mpi2SasIoUnitControlReply_t
));
3200 memset(mpi_reply
, 0, sizeof(Mpi2SasIoUnitControlReply_t
));
3201 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3206 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
3208 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3211 mutex_unlock(&ioc
->base_cmds
.mutex
);
3217 * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
3218 * @ioc: per adapter object
3219 * @mpi_reply: the reply payload from FW
3220 * @mpi_request: the request payload sent to FW
3222 * The SCSI Enclosure Processor request message causes the IOC to
3223 * communicate with SES devices to control LED status signals.
3225 * Returns 0 for success, non-zero for failure.
3228 mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER
*ioc
,
3229 Mpi2SepReply_t
*mpi_reply
, Mpi2SepRequest_t
*mpi_request
)
3233 unsigned long timeleft
;
3237 u16 wait_state_count
;
3239 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3242 mutex_lock(&ioc
->base_cmds
.mutex
);
3244 if (ioc
->base_cmds
.status
!= MPT2_CMD_NOT_USED
) {
3245 printk(MPT2SAS_ERR_FMT
"%s: base_cmd in use\n",
3246 ioc
->name
, __func__
);
3251 wait_state_count
= 0;
3252 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3253 while (ioc_state
!= MPI2_IOC_STATE_OPERATIONAL
) {
3254 if (wait_state_count
++ == 10) {
3255 printk(MPT2SAS_ERR_FMT
3256 "%s: failed due to ioc not operational\n",
3257 ioc
->name
, __func__
);
3262 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 1);
3263 printk(MPT2SAS_INFO_FMT
"%s: waiting for "
3264 "operational state(count=%d)\n", ioc
->name
,
3265 __func__
, wait_state_count
);
3268 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3270 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3271 ioc
->name
, __func__
);
3277 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3278 request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3279 ioc
->base_cmds
.smid
= smid
;
3280 memcpy(request
, mpi_request
, sizeof(Mpi2SepReply_t
));
3281 init_completion(&ioc
->base_cmds
.done
);
3282 mpt2sas_base_put_smid_default(ioc
, smid
);
3283 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
,
3284 msecs_to_jiffies(10000));
3285 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3286 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3287 ioc
->name
, __func__
);
3288 _debug_dump_mf(mpi_request
,
3289 sizeof(Mpi2SepRequest_t
)/4);
3290 if (!(ioc
->base_cmds
.status
& MPT2_CMD_RESET
))
3292 goto issue_host_reset
;
3294 if (ioc
->base_cmds
.status
& MPT2_CMD_REPLY_VALID
)
3295 memcpy(mpi_reply
, ioc
->base_cmds
.reply
,
3296 sizeof(Mpi2SepReply_t
));
3298 memset(mpi_reply
, 0, sizeof(Mpi2SepReply_t
));
3299 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3304 mpt2sas_base_hard_reset_handler(ioc
, CAN_SLEEP
,
3306 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3309 mutex_unlock(&ioc
->base_cmds
.mutex
);
3314 * _base_get_port_facts - obtain port facts reply and save in ioc
3315 * @ioc: per adapter object
3316 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3318 * Returns 0 for success, non-zero for failure.
3321 _base_get_port_facts(struct MPT2SAS_ADAPTER
*ioc
, int port
, int sleep_flag
)
3323 Mpi2PortFactsRequest_t mpi_request
;
3324 Mpi2PortFactsReply_t mpi_reply
;
3325 struct mpt2sas_port_facts
*pfacts
;
3326 int mpi_reply_sz
, mpi_request_sz
, r
;
3328 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3331 mpi_reply_sz
= sizeof(Mpi2PortFactsReply_t
);
3332 mpi_request_sz
= sizeof(Mpi2PortFactsRequest_t
);
3333 memset(&mpi_request
, 0, mpi_request_sz
);
3334 mpi_request
.Function
= MPI2_FUNCTION_PORT_FACTS
;
3335 mpi_request
.PortNumber
= port
;
3336 r
= _base_handshake_req_reply_wait(ioc
, mpi_request_sz
,
3337 (u32
*)&mpi_request
, mpi_reply_sz
, (u16
*)&mpi_reply
, 5, CAN_SLEEP
);
3340 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3341 ioc
->name
, __func__
, r
);
3345 pfacts
= &ioc
->pfacts
[port
];
3346 memset(pfacts
, 0, sizeof(Mpi2PortFactsReply_t
));
3347 pfacts
->PortNumber
= mpi_reply
.PortNumber
;
3348 pfacts
->VP_ID
= mpi_reply
.VP_ID
;
3349 pfacts
->VF_ID
= mpi_reply
.VF_ID
;
3350 pfacts
->MaxPostedCmdBuffers
=
3351 le16_to_cpu(mpi_reply
.MaxPostedCmdBuffers
);
3357 * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
3358 * @ioc: per adapter object
3359 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3361 * Returns 0 for success, non-zero for failure.
3364 _base_get_ioc_facts(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3366 Mpi2IOCFactsRequest_t mpi_request
;
3367 Mpi2IOCFactsReply_t mpi_reply
;
3368 struct mpt2sas_facts
*facts
;
3369 int mpi_reply_sz
, mpi_request_sz
, r
;
3371 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3374 mpi_reply_sz
= sizeof(Mpi2IOCFactsReply_t
);
3375 mpi_request_sz
= sizeof(Mpi2IOCFactsRequest_t
);
3376 memset(&mpi_request
, 0, mpi_request_sz
);
3377 mpi_request
.Function
= MPI2_FUNCTION_IOC_FACTS
;
3378 r
= _base_handshake_req_reply_wait(ioc
, mpi_request_sz
,
3379 (u32
*)&mpi_request
, mpi_reply_sz
, (u16
*)&mpi_reply
, 5, CAN_SLEEP
);
3382 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3383 ioc
->name
, __func__
, r
);
3387 facts
= &ioc
->facts
;
3388 memset(facts
, 0, sizeof(Mpi2IOCFactsReply_t
));
3389 facts
->MsgVersion
= le16_to_cpu(mpi_reply
.MsgVersion
);
3390 facts
->HeaderVersion
= le16_to_cpu(mpi_reply
.HeaderVersion
);
3391 facts
->VP_ID
= mpi_reply
.VP_ID
;
3392 facts
->VF_ID
= mpi_reply
.VF_ID
;
3393 facts
->IOCExceptions
= le16_to_cpu(mpi_reply
.IOCExceptions
);
3394 facts
->MaxChainDepth
= mpi_reply
.MaxChainDepth
;
3395 facts
->WhoInit
= mpi_reply
.WhoInit
;
3396 facts
->NumberOfPorts
= mpi_reply
.NumberOfPorts
;
3397 facts
->MaxMSIxVectors
= mpi_reply
.MaxMSIxVectors
;
3398 facts
->RequestCredit
= le16_to_cpu(mpi_reply
.RequestCredit
);
3399 facts
->MaxReplyDescriptorPostQueueDepth
=
3400 le16_to_cpu(mpi_reply
.MaxReplyDescriptorPostQueueDepth
);
3401 facts
->ProductID
= le16_to_cpu(mpi_reply
.ProductID
);
3402 facts
->IOCCapabilities
= le32_to_cpu(mpi_reply
.IOCCapabilities
);
3403 if ((facts
->IOCCapabilities
& MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID
))
3404 ioc
->ir_firmware
= 1;
3405 facts
->FWVersion
.Word
= le32_to_cpu(mpi_reply
.FWVersion
.Word
);
3406 facts
->IOCRequestFrameSize
=
3407 le16_to_cpu(mpi_reply
.IOCRequestFrameSize
);
3408 facts
->MaxInitiators
= le16_to_cpu(mpi_reply
.MaxInitiators
);
3409 facts
->MaxTargets
= le16_to_cpu(mpi_reply
.MaxTargets
);
3410 ioc
->shost
->max_id
= -1;
3411 facts
->MaxSasExpanders
= le16_to_cpu(mpi_reply
.MaxSasExpanders
);
3412 facts
->MaxEnclosures
= le16_to_cpu(mpi_reply
.MaxEnclosures
);
3413 facts
->ProtocolFlags
= le16_to_cpu(mpi_reply
.ProtocolFlags
);
3414 facts
->HighPriorityCredit
=
3415 le16_to_cpu(mpi_reply
.HighPriorityCredit
);
3416 facts
->ReplyFrameSize
= mpi_reply
.ReplyFrameSize
;
3417 facts
->MaxDevHandle
= le16_to_cpu(mpi_reply
.MaxDevHandle
);
3419 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"hba queue depth(%d), "
3420 "max chains per io(%d)\n", ioc
->name
, facts
->RequestCredit
,
3421 facts
->MaxChainDepth
));
3422 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"request frame size(%d), "
3423 "reply frame size(%d)\n", ioc
->name
,
3424 facts
->IOCRequestFrameSize
* 4, facts
->ReplyFrameSize
* 4));
3429 * _base_send_ioc_init - send ioc_init to firmware
3430 * @ioc: per adapter object
3431 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3433 * Returns 0 for success, non-zero for failure.
3436 _base_send_ioc_init(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3438 Mpi2IOCInitRequest_t mpi_request
;
3439 Mpi2IOCInitReply_t mpi_reply
;
3441 struct timeval current_time
;
3444 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3447 memset(&mpi_request
, 0, sizeof(Mpi2IOCInitRequest_t
));
3448 mpi_request
.Function
= MPI2_FUNCTION_IOC_INIT
;
3449 mpi_request
.WhoInit
= MPI2_WHOINIT_HOST_DRIVER
;
3450 mpi_request
.VF_ID
= 0; /* TODO */
3451 mpi_request
.VP_ID
= 0;
3452 mpi_request
.MsgVersion
= cpu_to_le16(MPI2_VERSION
);
3453 mpi_request
.HeaderVersion
= cpu_to_le16(MPI2_HEADER_VERSION
);
3455 if (_base_is_controller_msix_enabled(ioc
))
3456 mpi_request
.HostMSIxVectors
= ioc
->reply_queue_count
;
3457 mpi_request
.SystemRequestFrameSize
= cpu_to_le16(ioc
->request_sz
/4);
3458 mpi_request
.ReplyDescriptorPostQueueDepth
=
3459 cpu_to_le16(ioc
->reply_post_queue_depth
);
3460 mpi_request
.ReplyFreeQueueDepth
=
3461 cpu_to_le16(ioc
->reply_free_queue_depth
);
3463 mpi_request
.SenseBufferAddressHigh
=
3464 cpu_to_le32((u64
)ioc
->sense_dma
>> 32);
3465 mpi_request
.SystemReplyAddressHigh
=
3466 cpu_to_le32((u64
)ioc
->reply_dma
>> 32);
3467 mpi_request
.SystemRequestFrameBaseAddress
=
3468 cpu_to_le64((u64
)ioc
->request_dma
);
3469 mpi_request
.ReplyFreeQueueAddress
=
3470 cpu_to_le64((u64
)ioc
->reply_free_dma
);
3471 mpi_request
.ReplyDescriptorPostQueueAddress
=
3472 cpu_to_le64((u64
)ioc
->reply_post_free_dma
);
3475 /* This time stamp specifies number of milliseconds
3476 * since epoch ~ midnight January 1, 1970.
3478 do_gettimeofday(¤t_time
);
3479 mpi_request
.TimeStamp
= cpu_to_le64((u64
)current_time
.tv_sec
* 1000 +
3480 (current_time
.tv_usec
/ 1000));
3482 if (ioc
->logging_level
& MPT_DEBUG_INIT
) {
3486 mfp
= (__le32
*)&mpi_request
;
3487 printk(KERN_INFO
"\toffset:data\n");
3488 for (i
= 0; i
< sizeof(Mpi2IOCInitRequest_t
)/4; i
++)
3489 printk(KERN_INFO
"\t[0x%02x]:%08x\n", i
*4,
3490 le32_to_cpu(mfp
[i
]));
3493 r
= _base_handshake_req_reply_wait(ioc
,
3494 sizeof(Mpi2IOCInitRequest_t
), (u32
*)&mpi_request
,
3495 sizeof(Mpi2IOCInitReply_t
), (u16
*)&mpi_reply
, 10,
3499 printk(MPT2SAS_ERR_FMT
"%s: handshake failed (r=%d)\n",
3500 ioc
->name
, __func__
, r
);
3504 ioc_status
= le16_to_cpu(mpi_reply
.IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3505 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
||
3506 mpi_reply
.IOCLogInfo
) {
3507 printk(MPT2SAS_ERR_FMT
"%s: failed\n", ioc
->name
, __func__
);
3515 * mpt2sas_port_enable_done - command completion routine for port enable
3516 * @ioc: per adapter object
3517 * @smid: system request message index
3518 * @msix_index: MSIX table index supplied by the OS
3519 * @reply: reply message frame(lower 32bit addr)
3521 * Return 1 meaning mf should be freed from _base_interrupt
3522 * 0 means the mf is freed from this function.
3525 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER
*ioc
, u16 smid
, u8 msix_index
,
3528 MPI2DefaultReply_t
*mpi_reply
;
3531 mpi_reply
= mpt2sas_base_get_reply_virt_addr(ioc
, reply
);
3532 if (mpi_reply
&& mpi_reply
->Function
== MPI2_FUNCTION_EVENT_ACK
)
3535 if (ioc
->port_enable_cmds
.status
== MPT2_CMD_NOT_USED
)
3538 ioc
->port_enable_cmds
.status
|= MPT2_CMD_COMPLETE
;
3540 ioc
->port_enable_cmds
.status
|= MPT2_CMD_REPLY_VALID
;
3541 memcpy(ioc
->port_enable_cmds
.reply
, mpi_reply
,
3542 mpi_reply
->MsgLength
*4);
3544 ioc
->port_enable_cmds
.status
&= ~MPT2_CMD_PENDING
;
3546 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3548 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
)
3549 ioc
->port_enable_failed
= 1;
3551 if (ioc
->is_driver_loading
) {
3552 if (ioc_status
== MPI2_IOCSTATUS_SUCCESS
) {
3553 mpt2sas_port_enable_complete(ioc
);
3556 ioc
->start_scan_failed
= ioc_status
;
3557 ioc
->start_scan
= 0;
3561 complete(&ioc
->port_enable_cmds
.done
);
3567 * _base_send_port_enable - send port_enable(discovery stuff) to firmware
3568 * @ioc: per adapter object
3569 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3571 * Returns 0 for success, non-zero for failure.
3574 _base_send_port_enable(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3576 Mpi2PortEnableRequest_t
*mpi_request
;
3577 Mpi2PortEnableReply_t
*mpi_reply
;
3578 unsigned long timeleft
;
3583 printk(MPT2SAS_INFO_FMT
"sending port enable !!\n", ioc
->name
);
3585 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_PENDING
) {
3586 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3587 ioc
->name
, __func__
);
3591 smid
= mpt2sas_base_get_smid(ioc
, ioc
->port_enable_cb_idx
);
3593 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3594 ioc
->name
, __func__
);
3598 ioc
->port_enable_cmds
.status
= MPT2_CMD_PENDING
;
3599 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3600 ioc
->port_enable_cmds
.smid
= smid
;
3601 memset(mpi_request
, 0, sizeof(Mpi2PortEnableRequest_t
));
3602 mpi_request
->Function
= MPI2_FUNCTION_PORT_ENABLE
;
3604 init_completion(&ioc
->port_enable_cmds
.done
);
3605 mpt2sas_base_put_smid_default(ioc
, smid
);
3606 timeleft
= wait_for_completion_timeout(&ioc
->port_enable_cmds
.done
,
3608 if (!(ioc
->port_enable_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3609 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3610 ioc
->name
, __func__
);
3611 _debug_dump_mf(mpi_request
,
3612 sizeof(Mpi2PortEnableRequest_t
)/4);
3613 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_RESET
)
3619 mpi_reply
= ioc
->port_enable_cmds
.reply
;
3621 ioc_status
= le16_to_cpu(mpi_reply
->IOCStatus
) & MPI2_IOCSTATUS_MASK
;
3622 if (ioc_status
!= MPI2_IOCSTATUS_SUCCESS
) {
3623 printk(MPT2SAS_ERR_FMT
"%s: failed with (ioc_status=0x%08x)\n",
3624 ioc
->name
, __func__
, ioc_status
);
3629 ioc
->port_enable_cmds
.status
= MPT2_CMD_NOT_USED
;
3630 printk(MPT2SAS_INFO_FMT
"port enable: %s\n", ioc
->name
, ((r
== 0) ?
3631 "SUCCESS" : "FAILED"));
3636 * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply)
3637 * @ioc: per adapter object
3639 * Returns 0 for success, non-zero for failure.
3642 mpt2sas_port_enable(struct MPT2SAS_ADAPTER
*ioc
)
3644 Mpi2PortEnableRequest_t
*mpi_request
;
3647 printk(MPT2SAS_INFO_FMT
"sending port enable !!\n", ioc
->name
);
3649 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_PENDING
) {
3650 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3651 ioc
->name
, __func__
);
3655 smid
= mpt2sas_base_get_smid(ioc
, ioc
->port_enable_cb_idx
);
3657 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3658 ioc
->name
, __func__
);
3662 ioc
->port_enable_cmds
.status
= MPT2_CMD_PENDING
;
3663 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3664 ioc
->port_enable_cmds
.smid
= smid
;
3665 memset(mpi_request
, 0, sizeof(Mpi2PortEnableRequest_t
));
3666 mpi_request
->Function
= MPI2_FUNCTION_PORT_ENABLE
;
3668 mpt2sas_base_put_smid_default(ioc
, smid
);
3673 * _base_determine_wait_on_discovery - desposition
3674 * @ioc: per adapter object
3676 * Decide whether to wait on discovery to complete. Used to either
3677 * locate boot device, or report volumes ahead of physical devices.
3679 * Returns 1 for wait, 0 for don't wait
3682 _base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER
*ioc
)
3684 /* We wait for discovery to complete if IR firmware is loaded.
3685 * The sas topology events arrive before PD events, so we need time to
3686 * turn on the bit in ioc->pd_handles to indicate PD
3687 * Also, it maybe required to report Volumes ahead of physical
3688 * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set.
3690 if (ioc
->ir_firmware
)
3693 /* if no Bios, then we don't need to wait */
3694 if (!ioc
->bios_pg3
.BiosVersion
)
3697 /* Bios is present, then we drop down here.
3699 * If there any entries in the Bios Page 2, then we wait
3700 * for discovery to complete.
3703 /* Current Boot Device */
3704 if ((ioc
->bios_pg2
.CurrentBootDeviceForm
&
3705 MPI2_BIOSPAGE2_FORM_MASK
) ==
3706 MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
&&
3707 /* Request Boot Device */
3708 (ioc
->bios_pg2
.ReqBootDeviceForm
&
3709 MPI2_BIOSPAGE2_FORM_MASK
) ==
3710 MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
&&
3711 /* Alternate Request Boot Device */
3712 (ioc
->bios_pg2
.ReqAltBootDeviceForm
&
3713 MPI2_BIOSPAGE2_FORM_MASK
) ==
3714 MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED
)
3722 * _base_unmask_events - turn on notification for this event
3723 * @ioc: per adapter object
3724 * @event: firmware event
3726 * The mask is stored in ioc->event_masks.
3729 _base_unmask_events(struct MPT2SAS_ADAPTER
*ioc
, u16 event
)
3736 desired_event
= (1 << (event
% 32));
3739 ioc
->event_masks
[0] &= ~desired_event
;
3740 else if (event
< 64)
3741 ioc
->event_masks
[1] &= ~desired_event
;
3742 else if (event
< 96)
3743 ioc
->event_masks
[2] &= ~desired_event
;
3744 else if (event
< 128)
3745 ioc
->event_masks
[3] &= ~desired_event
;
3749 * _base_event_notification - send event notification
3750 * @ioc: per adapter object
3751 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3753 * Returns 0 for success, non-zero for failure.
3756 _base_event_notification(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3758 Mpi2EventNotificationRequest_t
*mpi_request
;
3759 unsigned long timeleft
;
3764 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3767 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
3768 printk(MPT2SAS_ERR_FMT
"%s: internal command already in use\n",
3769 ioc
->name
, __func__
);
3773 smid
= mpt2sas_base_get_smid(ioc
, ioc
->base_cb_idx
);
3775 printk(MPT2SAS_ERR_FMT
"%s: failed obtaining a smid\n",
3776 ioc
->name
, __func__
);
3779 ioc
->base_cmds
.status
= MPT2_CMD_PENDING
;
3780 mpi_request
= mpt2sas_base_get_msg_frame(ioc
, smid
);
3781 ioc
->base_cmds
.smid
= smid
;
3782 memset(mpi_request
, 0, sizeof(Mpi2EventNotificationRequest_t
));
3783 mpi_request
->Function
= MPI2_FUNCTION_EVENT_NOTIFICATION
;
3784 mpi_request
->VF_ID
= 0; /* TODO */
3785 mpi_request
->VP_ID
= 0;
3786 for (i
= 0; i
< MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++)
3787 mpi_request
->EventMasks
[i
] =
3788 cpu_to_le32(ioc
->event_masks
[i
]);
3789 init_completion(&ioc
->base_cmds
.done
);
3790 mpt2sas_base_put_smid_default(ioc
, smid
);
3791 timeleft
= wait_for_completion_timeout(&ioc
->base_cmds
.done
, 30*HZ
);
3792 if (!(ioc
->base_cmds
.status
& MPT2_CMD_COMPLETE
)) {
3793 printk(MPT2SAS_ERR_FMT
"%s: timeout\n",
3794 ioc
->name
, __func__
);
3795 _debug_dump_mf(mpi_request
,
3796 sizeof(Mpi2EventNotificationRequest_t
)/4);
3797 if (ioc
->base_cmds
.status
& MPT2_CMD_RESET
)
3802 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: complete\n",
3803 ioc
->name
, __func__
));
3804 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
3809 * mpt2sas_base_validate_event_type - validating event types
3810 * @ioc: per adapter object
3811 * @event: firmware event
3813 * This will turn on firmware event notification when application
3814 * ask for that event. We don't mask events that are already enabled.
3817 mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER
*ioc
, u32
*event_type
)
3820 u32 event_mask
, desired_event
;
3821 u8 send_update_to_fw
;
3823 for (i
= 0, send_update_to_fw
= 0; i
<
3824 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++) {
3825 event_mask
= ~event_type
[i
];
3827 for (j
= 0; j
< 32; j
++) {
3828 if (!(event_mask
& desired_event
) &&
3829 (ioc
->event_masks
[i
] & desired_event
)) {
3830 ioc
->event_masks
[i
] &= ~desired_event
;
3831 send_update_to_fw
= 1;
3833 desired_event
= (desired_event
<< 1);
3837 if (!send_update_to_fw
)
3840 mutex_lock(&ioc
->base_cmds
.mutex
);
3841 _base_event_notification(ioc
, CAN_SLEEP
);
3842 mutex_unlock(&ioc
->base_cmds
.mutex
);
3846 * _base_diag_reset - the "big hammer" start of day reset
3847 * @ioc: per adapter object
3848 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3850 * Returns 0 for success, non-zero for failure.
3853 _base_diag_reset(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
3855 u32 host_diagnostic
;
3860 printk(MPT2SAS_INFO_FMT
"sending diag reset !!\n", ioc
->name
);
3861 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"clear interrupts\n",
3866 /* Write magic sequence to WriteSequence register
3867 * Loop until in diagnostic mode
3869 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"write magic "
3870 "sequence\n", ioc
->name
));
3871 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3872 writel(MPI2_WRSEQ_1ST_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3873 writel(MPI2_WRSEQ_2ND_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3874 writel(MPI2_WRSEQ_3RD_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3875 writel(MPI2_WRSEQ_4TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3876 writel(MPI2_WRSEQ_5TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3877 writel(MPI2_WRSEQ_6TH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3880 if (sleep_flag
== CAN_SLEEP
)
3888 host_diagnostic
= readl(&ioc
->chip
->HostDiagnostic
);
3889 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"wrote magic "
3890 "sequence: count(%d), host_diagnostic(0x%08x)\n",
3891 ioc
->name
, count
, host_diagnostic
));
3893 } while ((host_diagnostic
& MPI2_DIAG_DIAG_WRITE_ENABLE
) == 0);
3895 hcb_size
= readl(&ioc
->chip
->HCBSize
);
3897 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"diag reset: issued\n",
3899 writel(host_diagnostic
| MPI2_DIAG_RESET_ADAPTER
,
3900 &ioc
->chip
->HostDiagnostic
);
3902 /* don't access any registers for 50 milliseconds */
3905 /* 300 second max wait */
3906 for (count
= 0; count
< 3000000 ; count
++) {
3908 host_diagnostic
= readl(&ioc
->chip
->HostDiagnostic
);
3910 if (host_diagnostic
== 0xFFFFFFFF)
3912 if (!(host_diagnostic
& MPI2_DIAG_RESET_ADAPTER
))
3916 if (sleep_flag
== CAN_SLEEP
)
3922 if (host_diagnostic
& MPI2_DIAG_HCB_MODE
) {
3924 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"restart the adapter "
3925 "assuming the HCB Address points to good F/W\n",
3927 host_diagnostic
&= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK
;
3928 host_diagnostic
|= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW
;
3929 writel(host_diagnostic
, &ioc
->chip
->HostDiagnostic
);
3931 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
3932 "re-enable the HCDW\n", ioc
->name
));
3933 writel(hcb_size
| MPI2_HCB_SIZE_HCB_ENABLE
,
3934 &ioc
->chip
->HCBSize
);
3937 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"restart the adapter\n",
3939 writel(host_diagnostic
& ~MPI2_DIAG_HOLD_IOC_RESET
,
3940 &ioc
->chip
->HostDiagnostic
);
3942 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"disable writes to the "
3943 "diagnostic register\n", ioc
->name
));
3944 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE
, &ioc
->chip
->WriteSequence
);
3946 drsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"Wait for FW to go to the "
3947 "READY state\n", ioc
->name
));
3948 ioc_state
= _base_wait_on_iocstate(ioc
, MPI2_IOC_STATE_READY
, 20,
3951 printk(MPT2SAS_ERR_FMT
"%s: failed going to ready state "
3952 " (ioc_state=0x%x)\n", ioc
->name
, __func__
, ioc_state
);
3956 printk(MPT2SAS_INFO_FMT
"diag reset: SUCCESS\n", ioc
->name
);
3960 printk(MPT2SAS_ERR_FMT
"diag reset: FAILED\n", ioc
->name
);
3965 * _base_make_ioc_ready - put controller in READY state
3966 * @ioc: per adapter object
3967 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3968 * @type: FORCE_BIG_HAMMER or SOFT_RESET
3970 * Returns 0 for success, non-zero for failure.
3973 _base_make_ioc_ready(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
3974 enum reset_type type
)
3979 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
3982 if (ioc
->pci_error_recovery
)
3985 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 0);
3986 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: ioc_state(0x%08x)\n",
3987 ioc
->name
, __func__
, ioc_state
));
3989 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_READY
)
3992 if (ioc_state
& MPI2_DOORBELL_USED
) {
3993 dhsprintk(ioc
, printk(MPT2SAS_INFO_FMT
"unexpected doorbell "
3994 "active!\n", ioc
->name
));
3995 goto issue_diag_reset
;
3998 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_FAULT
) {
3999 mpt2sas_base_fault_info(ioc
, ioc_state
&
4000 MPI2_DOORBELL_DATA_MASK
);
4001 goto issue_diag_reset
;
4004 if (type
== FORCE_BIG_HAMMER
)
4005 goto issue_diag_reset
;
4007 if ((ioc_state
& MPI2_IOC_STATE_MASK
) == MPI2_IOC_STATE_OPERATIONAL
)
4008 if (!(_base_send_ioc_reset(ioc
,
4009 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
, 15, CAN_SLEEP
))) {
4010 ioc
->ioc_reset_count
++;
4015 rc
= _base_diag_reset(ioc
, CAN_SLEEP
);
4016 ioc
->ioc_reset_count
++;
4021 * _base_make_ioc_operational - put controller in OPERATIONAL state
4022 * @ioc: per adapter object
4023 * @sleep_flag: CAN_SLEEP or NO_SLEEP
4025 * Returns 0 for success, non-zero for failure.
4028 _base_make_ioc_operational(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
4031 unsigned long flags
;
4034 struct _tr_list
*delayed_tr
, *delayed_tr_next
;
4036 struct adapter_reply_queue
*reply_q
;
4037 long reply_post_free
;
4038 u32 reply_post_free_sz
;
4040 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4043 /* clean the delayed target reset list */
4044 list_for_each_entry_safe(delayed_tr
, delayed_tr_next
,
4045 &ioc
->delayed_tr_list
, list
) {
4046 list_del(&delayed_tr
->list
);
4050 list_for_each_entry_safe(delayed_tr
, delayed_tr_next
,
4051 &ioc
->delayed_tr_volume_list
, list
) {
4052 list_del(&delayed_tr
->list
);
4056 /* initialize the scsi lookup free list */
4057 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
4058 INIT_LIST_HEAD(&ioc
->free_list
);
4060 for (i
= 0; i
< ioc
->scsiio_depth
; i
++, smid
++) {
4061 INIT_LIST_HEAD(&ioc
->scsi_lookup
[i
].chain_list
);
4062 ioc
->scsi_lookup
[i
].cb_idx
= 0xFF;
4063 ioc
->scsi_lookup
[i
].smid
= smid
;
4064 ioc
->scsi_lookup
[i
].scmd
= NULL
;
4065 ioc
->scsi_lookup
[i
].direct_io
= 0;
4066 list_add_tail(&ioc
->scsi_lookup
[i
].tracker_list
,
4070 /* hi-priority queue */
4071 INIT_LIST_HEAD(&ioc
->hpr_free_list
);
4072 smid
= ioc
->hi_priority_smid
;
4073 for (i
= 0; i
< ioc
->hi_priority_depth
; i
++, smid
++) {
4074 ioc
->hpr_lookup
[i
].cb_idx
= 0xFF;
4075 ioc
->hpr_lookup
[i
].smid
= smid
;
4076 list_add_tail(&ioc
->hpr_lookup
[i
].tracker_list
,
4077 &ioc
->hpr_free_list
);
4080 /* internal queue */
4081 INIT_LIST_HEAD(&ioc
->internal_free_list
);
4082 smid
= ioc
->internal_smid
;
4083 for (i
= 0; i
< ioc
->internal_depth
; i
++, smid
++) {
4084 ioc
->internal_lookup
[i
].cb_idx
= 0xFF;
4085 ioc
->internal_lookup
[i
].smid
= smid
;
4086 list_add_tail(&ioc
->internal_lookup
[i
].tracker_list
,
4087 &ioc
->internal_free_list
);
4091 INIT_LIST_HEAD(&ioc
->free_chain_list
);
4092 for (i
= 0; i
< ioc
->chain_depth
; i
++)
4093 list_add_tail(&ioc
->chain_lookup
[i
].tracker_list
,
4094 &ioc
->free_chain_list
);
4096 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
4098 /* initialize Reply Free Queue */
4099 for (i
= 0, reply_address
= (u32
)ioc
->reply_dma
;
4100 i
< ioc
->reply_free_queue_depth
; i
++, reply_address
+=
4102 ioc
->reply_free
[i
] = cpu_to_le32(reply_address
);
4104 /* initialize reply queues */
4105 if (ioc
->is_driver_loading
)
4106 _base_assign_reply_queues(ioc
);
4108 /* initialize Reply Post Free Queue */
4109 reply_post_free
= (long)ioc
->reply_post_free
;
4110 reply_post_free_sz
= ioc
->reply_post_queue_depth
*
4111 sizeof(Mpi2DefaultReplyDescriptor_t
);
4112 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
) {
4113 reply_q
->reply_post_host_index
= 0;
4114 reply_q
->reply_post_free
= (Mpi2ReplyDescriptorsUnion_t
*)
4116 for (i
= 0; i
< ioc
->reply_post_queue_depth
; i
++)
4117 reply_q
->reply_post_free
[i
].Words
=
4118 cpu_to_le64(ULLONG_MAX
);
4119 if (!_base_is_controller_msix_enabled(ioc
))
4120 goto skip_init_reply_post_free_queue
;
4121 reply_post_free
+= reply_post_free_sz
;
4123 skip_init_reply_post_free_queue
:
4125 r
= _base_send_ioc_init(ioc
, sleep_flag
);
4129 /* initialize reply free host index */
4130 ioc
->reply_free_host_index
= ioc
->reply_free_queue_depth
- 1;
4131 writel(ioc
->reply_free_host_index
, &ioc
->chip
->ReplyFreeHostIndex
);
4133 /* initialize reply post host index */
4134 list_for_each_entry(reply_q
, &ioc
->reply_queue_list
, list
) {
4135 writel(reply_q
->msix_index
<< MPI2_RPHI_MSIX_INDEX_SHIFT
,
4136 &ioc
->chip
->ReplyPostHostIndex
);
4137 if (!_base_is_controller_msix_enabled(ioc
))
4138 goto skip_init_reply_post_host_index
;
4141 skip_init_reply_post_host_index
:
4143 _base_unmask_interrupts(ioc
);
4145 r
= _base_event_notification(ioc
, sleep_flag
);
4149 if (sleep_flag
== CAN_SLEEP
)
4150 _base_static_config_pages(ioc
);
4153 if (ioc
->is_driver_loading
) {
4154 if (ioc
->is_warpdrive
&& ioc
->manu_pg10
.OEMIdentifier
4156 hide_flag
= (u8
) (ioc
->manu_pg10
.OEMSpecificFlags0
&
4157 MFG_PAGE10_HIDE_SSDS_MASK
);
4158 if (hide_flag
!= MFG_PAGE10_HIDE_SSDS_MASK
)
4159 ioc
->mfg_pg10_hide_flag
= hide_flag
;
4161 ioc
->wait_for_discovery_to_complete
=
4162 _base_determine_wait_on_discovery(ioc
);
4163 return r
; /* scan_start and scan_finished support */
4165 r
= _base_send_port_enable(ioc
, sleep_flag
);
4173 * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
4174 * @ioc: per adapter object
4179 mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER
*ioc
)
4181 struct pci_dev
*pdev
= ioc
->pdev
;
4183 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4186 _base_mask_interrupts(ioc
);
4187 ioc
->shost_recovery
= 1;
4188 _base_make_ioc_ready(ioc
, CAN_SLEEP
, SOFT_RESET
);
4189 ioc
->shost_recovery
= 0;
4190 _base_free_irq(ioc
);
4191 _base_disable_msix(ioc
);
4195 pci_release_selected_regions(ioc
->pdev
, ioc
->bars
);
4196 pci_disable_pcie_error_reporting(pdev
);
4197 pci_disable_device(pdev
);
4202 * mpt2sas_base_attach - attach controller instance
4203 * @ioc: per adapter object
4205 * Returns 0 for success, non-zero for failure.
4208 mpt2sas_base_attach(struct MPT2SAS_ADAPTER
*ioc
)
4211 int cpu_id
, last_cpu_id
= 0;
4213 dinitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4216 /* setup cpu_msix_table */
4217 ioc
->cpu_count
= num_online_cpus();
4218 for_each_online_cpu(cpu_id
)
4219 last_cpu_id
= cpu_id
;
4220 ioc
->cpu_msix_table_sz
= last_cpu_id
+ 1;
4221 ioc
->cpu_msix_table
= kzalloc(ioc
->cpu_msix_table_sz
, GFP_KERNEL
);
4222 ioc
->reply_queue_count
= 1;
4223 if (!ioc
->cpu_msix_table
) {
4224 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"allocation for "
4225 "cpu_msix_table failed!!!\n", ioc
->name
));
4227 goto out_free_resources
;
4230 if (ioc
->is_warpdrive
) {
4231 ioc
->reply_post_host_index
= kcalloc(ioc
->cpu_msix_table_sz
,
4232 sizeof(resource_size_t
*), GFP_KERNEL
);
4233 if (!ioc
->reply_post_host_index
) {
4234 dfailprintk(ioc
, printk(MPT2SAS_INFO_FMT
"allocation "
4235 "for cpu_msix_table failed!!!\n", ioc
->name
));
4237 goto out_free_resources
;
4241 r
= mpt2sas_base_map_resources(ioc
);
4243 goto out_free_resources
;
4245 if (ioc
->is_warpdrive
) {
4246 ioc
->reply_post_host_index
[0] =
4247 (resource_size_t
*)&ioc
->chip
->ReplyPostHostIndex
;
4249 for (i
= 1; i
< ioc
->cpu_msix_table_sz
; i
++)
4250 ioc
->reply_post_host_index
[i
] = (resource_size_t
*)
4251 ((u8
*)&ioc
->chip
->Doorbell
+ (0x4000 + ((i
- 1)
4255 pci_set_drvdata(ioc
->pdev
, ioc
->shost
);
4256 r
= _base_get_ioc_facts(ioc
, CAN_SLEEP
);
4258 goto out_free_resources
;
4260 r
= _base_make_ioc_ready(ioc
, CAN_SLEEP
, SOFT_RESET
);
4262 goto out_free_resources
;
4264 ioc
->pfacts
= kcalloc(ioc
->facts
.NumberOfPorts
,
4265 sizeof(Mpi2PortFactsReply_t
), GFP_KERNEL
);
4268 goto out_free_resources
;
4271 for (i
= 0 ; i
< ioc
->facts
.NumberOfPorts
; i
++) {
4272 r
= _base_get_port_facts(ioc
, i
, CAN_SLEEP
);
4274 goto out_free_resources
;
4277 r
= _base_allocate_memory_pools(ioc
, CAN_SLEEP
);
4279 goto out_free_resources
;
4281 init_waitqueue_head(&ioc
->reset_wq
);
4283 /* allocate memory pd handle bitmask list */
4284 ioc
->pd_handles_sz
= (ioc
->facts
.MaxDevHandle
/ 8);
4285 if (ioc
->facts
.MaxDevHandle
% 8)
4286 ioc
->pd_handles_sz
++;
4287 ioc
->pd_handles
= kzalloc(ioc
->pd_handles_sz
,
4289 if (!ioc
->pd_handles
) {
4291 goto out_free_resources
;
4294 ioc
->fwfault_debug
= mpt2sas_fwfault_debug
;
4296 /* base internal command bits */
4297 mutex_init(&ioc
->base_cmds
.mutex
);
4298 ioc
->base_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4299 ioc
->base_cmds
.status
= MPT2_CMD_NOT_USED
;
4301 /* port_enable command bits */
4302 ioc
->port_enable_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4303 ioc
->port_enable_cmds
.status
= MPT2_CMD_NOT_USED
;
4305 /* transport internal command bits */
4306 ioc
->transport_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4307 ioc
->transport_cmds
.status
= MPT2_CMD_NOT_USED
;
4308 mutex_init(&ioc
->transport_cmds
.mutex
);
4310 /* scsih internal command bits */
4311 ioc
->scsih_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4312 ioc
->scsih_cmds
.status
= MPT2_CMD_NOT_USED
;
4313 mutex_init(&ioc
->scsih_cmds
.mutex
);
4315 /* task management internal command bits */
4316 ioc
->tm_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4317 ioc
->tm_cmds
.status
= MPT2_CMD_NOT_USED
;
4318 mutex_init(&ioc
->tm_cmds
.mutex
);
4320 /* config page internal command bits */
4321 ioc
->config_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4322 ioc
->config_cmds
.status
= MPT2_CMD_NOT_USED
;
4323 mutex_init(&ioc
->config_cmds
.mutex
);
4325 /* ctl module internal command bits */
4326 ioc
->ctl_cmds
.reply
= kzalloc(ioc
->reply_sz
, GFP_KERNEL
);
4327 ioc
->ctl_cmds
.sense
= kzalloc(SCSI_SENSE_BUFFERSIZE
, GFP_KERNEL
);
4328 ioc
->ctl_cmds
.status
= MPT2_CMD_NOT_USED
;
4329 mutex_init(&ioc
->ctl_cmds
.mutex
);
4331 if (!ioc
->base_cmds
.reply
|| !ioc
->transport_cmds
.reply
||
4332 !ioc
->scsih_cmds
.reply
|| !ioc
->tm_cmds
.reply
||
4333 !ioc
->config_cmds
.reply
|| !ioc
->ctl_cmds
.reply
||
4334 !ioc
->ctl_cmds
.sense
) {
4336 goto out_free_resources
;
4339 if (!ioc
->base_cmds
.reply
|| !ioc
->transport_cmds
.reply
||
4340 !ioc
->scsih_cmds
.reply
|| !ioc
->tm_cmds
.reply
||
4341 !ioc
->config_cmds
.reply
|| !ioc
->ctl_cmds
.reply
) {
4343 goto out_free_resources
;
4346 for (i
= 0; i
< MPI2_EVENT_NOTIFY_EVENTMASK_WORDS
; i
++)
4347 ioc
->event_masks
[i
] = -1;
4349 /* here we enable the events we care about */
4350 _base_unmask_events(ioc
, MPI2_EVENT_SAS_DISCOVERY
);
4351 _base_unmask_events(ioc
, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE
);
4352 _base_unmask_events(ioc
, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST
);
4353 _base_unmask_events(ioc
, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE
);
4354 _base_unmask_events(ioc
, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE
);
4355 _base_unmask_events(ioc
, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST
);
4356 _base_unmask_events(ioc
, MPI2_EVENT_IR_VOLUME
);
4357 _base_unmask_events(ioc
, MPI2_EVENT_IR_PHYSICAL_DISK
);
4358 _base_unmask_events(ioc
, MPI2_EVENT_IR_OPERATION_STATUS
);
4359 _base_unmask_events(ioc
, MPI2_EVENT_LOG_ENTRY_ADDED
);
4360 r
= _base_make_ioc_operational(ioc
, CAN_SLEEP
);
4362 goto out_free_resources
;
4364 if (missing_delay
[0] != -1 && missing_delay
[1] != -1)
4365 _base_update_missing_delay(ioc
, missing_delay
[0],
4372 ioc
->remove_host
= 1;
4373 mpt2sas_base_free_resources(ioc
);
4374 _base_release_memory_pools(ioc
);
4375 pci_set_drvdata(ioc
->pdev
, NULL
);
4376 kfree(ioc
->cpu_msix_table
);
4377 if (ioc
->is_warpdrive
)
4378 kfree(ioc
->reply_post_host_index
);
4379 kfree(ioc
->pd_handles
);
4380 kfree(ioc
->tm_cmds
.reply
);
4381 kfree(ioc
->transport_cmds
.reply
);
4382 kfree(ioc
->scsih_cmds
.reply
);
4383 kfree(ioc
->config_cmds
.reply
);
4384 kfree(ioc
->base_cmds
.reply
);
4385 kfree(ioc
->port_enable_cmds
.reply
);
4386 kfree(ioc
->ctl_cmds
.reply
);
4387 kfree(ioc
->ctl_cmds
.sense
);
4389 ioc
->ctl_cmds
.reply
= NULL
;
4390 ioc
->base_cmds
.reply
= NULL
;
4391 ioc
->tm_cmds
.reply
= NULL
;
4392 ioc
->scsih_cmds
.reply
= NULL
;
4393 ioc
->transport_cmds
.reply
= NULL
;
4394 ioc
->config_cmds
.reply
= NULL
;
4401 * mpt2sas_base_detach - remove controller instance
4402 * @ioc: per adapter object
4407 mpt2sas_base_detach(struct MPT2SAS_ADAPTER
*ioc
)
4410 dexitprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s\n", ioc
->name
,
4413 mpt2sas_base_stop_watchdog(ioc
);
4414 mpt2sas_base_free_resources(ioc
);
4415 _base_release_memory_pools(ioc
);
4416 pci_set_drvdata(ioc
->pdev
, NULL
);
4417 kfree(ioc
->cpu_msix_table
);
4418 if (ioc
->is_warpdrive
)
4419 kfree(ioc
->reply_post_host_index
);
4420 kfree(ioc
->pd_handles
);
4422 kfree(ioc
->ctl_cmds
.reply
);
4423 kfree(ioc
->ctl_cmds
.sense
);
4424 kfree(ioc
->base_cmds
.reply
);
4425 kfree(ioc
->port_enable_cmds
.reply
);
4426 kfree(ioc
->tm_cmds
.reply
);
4427 kfree(ioc
->transport_cmds
.reply
);
4428 kfree(ioc
->scsih_cmds
.reply
);
4429 kfree(ioc
->config_cmds
.reply
);
4433 * _base_reset_handler - reset callback handler (for base)
4434 * @ioc: per adapter object
4435 * @reset_phase: phase
4437 * The handler for doing any required cleanup or initialization.
4439 * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
4440 * MPT2_IOC_DONE_RESET
4445 _base_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int reset_phase
)
4447 mpt2sas_scsih_reset_handler(ioc
, reset_phase
);
4448 mpt2sas_ctl_reset_handler(ioc
, reset_phase
);
4449 switch (reset_phase
) {
4450 case MPT2_IOC_PRE_RESET
:
4451 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
4452 "MPT2_IOC_PRE_RESET\n", ioc
->name
, __func__
));
4454 case MPT2_IOC_AFTER_RESET
:
4455 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
4456 "MPT2_IOC_AFTER_RESET\n", ioc
->name
, __func__
));
4457 if (ioc
->transport_cmds
.status
& MPT2_CMD_PENDING
) {
4458 ioc
->transport_cmds
.status
|= MPT2_CMD_RESET
;
4459 mpt2sas_base_free_smid(ioc
, ioc
->transport_cmds
.smid
);
4460 complete(&ioc
->transport_cmds
.done
);
4462 if (ioc
->base_cmds
.status
& MPT2_CMD_PENDING
) {
4463 ioc
->base_cmds
.status
|= MPT2_CMD_RESET
;
4464 mpt2sas_base_free_smid(ioc
, ioc
->base_cmds
.smid
);
4465 complete(&ioc
->base_cmds
.done
);
4467 if (ioc
->port_enable_cmds
.status
& MPT2_CMD_PENDING
) {
4468 ioc
->port_enable_failed
= 1;
4469 ioc
->port_enable_cmds
.status
|= MPT2_CMD_RESET
;
4470 mpt2sas_base_free_smid(ioc
, ioc
->port_enable_cmds
.smid
);
4471 if (ioc
->is_driver_loading
) {
4472 ioc
->start_scan_failed
=
4473 MPI2_IOCSTATUS_INTERNAL_ERROR
;
4474 ioc
->start_scan
= 0;
4475 ioc
->port_enable_cmds
.status
=
4478 complete(&ioc
->port_enable_cmds
.done
);
4481 if (ioc
->config_cmds
.status
& MPT2_CMD_PENDING
) {
4482 ioc
->config_cmds
.status
|= MPT2_CMD_RESET
;
4483 mpt2sas_base_free_smid(ioc
, ioc
->config_cmds
.smid
);
4484 ioc
->config_cmds
.smid
= USHRT_MAX
;
4485 complete(&ioc
->config_cmds
.done
);
4488 case MPT2_IOC_DONE_RESET
:
4489 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: "
4490 "MPT2_IOC_DONE_RESET\n", ioc
->name
, __func__
));
4496 * _wait_for_commands_to_complete - reset controller
4497 * @ioc: Pointer to MPT_ADAPTER structure
4498 * @sleep_flag: CAN_SLEEP or NO_SLEEP
4500 * This function waiting(3s) for all pending commands to complete
4501 * prior to putting controller in reset.
4504 _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
)
4507 unsigned long flags
;
4510 ioc
->pending_io_count
= 0;
4511 if (sleep_flag
!= CAN_SLEEP
)
4514 ioc_state
= mpt2sas_base_get_iocstate(ioc
, 0);
4515 if ((ioc_state
& MPI2_IOC_STATE_MASK
) != MPI2_IOC_STATE_OPERATIONAL
)
4518 /* pending command count */
4519 spin_lock_irqsave(&ioc
->scsi_lookup_lock
, flags
);
4520 for (i
= 0; i
< ioc
->scsiio_depth
; i
++)
4521 if (ioc
->scsi_lookup
[i
].cb_idx
!= 0xFF)
4522 ioc
->pending_io_count
++;
4523 spin_unlock_irqrestore(&ioc
->scsi_lookup_lock
, flags
);
4525 if (!ioc
->pending_io_count
)
4528 /* wait for pending commands to complete */
4529 wait_event_timeout(ioc
->reset_wq
, ioc
->pending_io_count
== 0, 10 * HZ
);
4533 * mpt2sas_base_hard_reset_handler - reset controller
4534 * @ioc: Pointer to MPT_ADAPTER structure
4535 * @sleep_flag: CAN_SLEEP or NO_SLEEP
4536 * @type: FORCE_BIG_HAMMER or SOFT_RESET
4538 * Returns 0 for success, non-zero for failure.
4541 mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER
*ioc
, int sleep_flag
,
4542 enum reset_type type
)
4545 unsigned long flags
;
4547 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: enter\n", ioc
->name
,
4550 if (ioc
->pci_error_recovery
) {
4551 printk(MPT2SAS_ERR_FMT
"%s: pci error recovery reset\n",
4552 ioc
->name
, __func__
);
4557 if (mpt2sas_fwfault_debug
)
4558 mpt2sas_halt_firmware(ioc
);
4560 /* TODO - What we really should be doing is pulling
4561 * out all the code associated with NO_SLEEP; its never used.
4562 * That is legacy code from mpt fusion driver, ported over.
4563 * I will leave this BUG_ON here for now till its been resolved.
4565 BUG_ON(sleep_flag
== NO_SLEEP
);
4567 /* wait for an active reset in progress to complete */
4568 if (!mutex_trylock(&ioc
->reset_in_progress_mutex
)) {
4571 } while (ioc
->shost_recovery
== 1);
4572 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: exit\n", ioc
->name
,
4574 return ioc
->ioc_reset_in_progress_status
;
4577 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
4578 ioc
->shost_recovery
= 1;
4579 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
4581 _base_reset_handler(ioc
, MPT2_IOC_PRE_RESET
);
4582 _wait_for_commands_to_complete(ioc
, sleep_flag
);
4583 _base_mask_interrupts(ioc
);
4584 r
= _base_make_ioc_ready(ioc
, sleep_flag
, type
);
4587 _base_reset_handler(ioc
, MPT2_IOC_AFTER_RESET
);
4589 /* If this hard reset is called while port enable is active, then
4590 * there is no reason to call make_ioc_operational
4592 if (ioc
->is_driver_loading
&& ioc
->port_enable_failed
) {
4593 ioc
->remove_host
= 1;
4597 r
= _base_make_ioc_operational(ioc
, sleep_flag
);
4599 _base_reset_handler(ioc
, MPT2_IOC_DONE_RESET
);
4601 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: %s\n",
4602 ioc
->name
, __func__
, ((r
== 0) ? "SUCCESS" : "FAILED")));
4604 spin_lock_irqsave(&ioc
->ioc_reset_in_progress_lock
, flags
);
4605 ioc
->ioc_reset_in_progress_status
= r
;
4606 ioc
->shost_recovery
= 0;
4607 spin_unlock_irqrestore(&ioc
->ioc_reset_in_progress_lock
, flags
);
4608 mutex_unlock(&ioc
->reset_in_progress_mutex
);
4611 dtmprintk(ioc
, printk(MPT2SAS_INFO_FMT
"%s: exit\n", ioc
->name
,