Merge branch 'master'
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / scsi / aic7xxx / aic79xx_osm.c
1 /*
2 * Adaptec AIC79xx device driver for Linux.
3 *
4 * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_osm.c#171 $
5 *
6 * --------------------------------------------------------------------------
7 * Copyright (c) 1994-2000 Justin T. Gibbs.
8 * Copyright (c) 1997-1999 Doug Ledford
9 * Copyright (c) 2000-2003 Adaptec Inc.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45 #include "aic79xx_osm.h"
46 #include "aic79xx_inline.h"
47 #include <scsi/scsicam.h>
48
49 static struct scsi_transport_template *ahd_linux_transport_template = NULL;
50
51 #include <linux/init.h> /* __setup */
52 #include <linux/mm.h> /* For fetching system memory size */
53 #include <linux/blkdev.h> /* For block_size() */
54 #include <linux/delay.h> /* For ssleep/msleep */
55
56 /*
57 * Bucket size for counting good commands in between bad ones.
58 */
59 #define AHD_LINUX_ERR_THRESH 1000
60
61 /*
62 * Set this to the delay in seconds after SCSI bus reset.
63 * Note, we honor this only for the initial bus reset.
64 * The scsi error recovery code performs its own bus settle
65 * delay handling for error recovery actions.
66 */
67 #ifdef CONFIG_AIC79XX_RESET_DELAY_MS
68 #define AIC79XX_RESET_DELAY CONFIG_AIC79XX_RESET_DELAY_MS
69 #else
70 #define AIC79XX_RESET_DELAY 5000
71 #endif
72
73 /*
74 * To change the default number of tagged transactions allowed per-device,
75 * add a line to the lilo.conf file like:
76 * append="aic79xx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
77 * which will result in the first four devices on the first two
78 * controllers being set to a tagged queue depth of 32.
79 *
80 * The tag_commands is an array of 16 to allow for wide and twin adapters.
81 * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
82 * for channel 1.
83 */
84 typedef struct {
85 uint16_t tag_commands[16]; /* Allow for wide/twin adapters. */
86 } adapter_tag_info_t;
87
88 /*
89 * Modify this as you see fit for your system.
90 *
91 * 0 tagged queuing disabled
92 * 1 <= n <= 253 n == max tags ever dispatched.
93 *
94 * The driver will throttle the number of commands dispatched to a
95 * device if it returns queue full. For devices with a fixed maximum
96 * queue depth, the driver will eventually determine this depth and
97 * lock it in (a console message is printed to indicate that a lock
98 * has occurred). On some devices, queue full is returned for a temporary
99 * resource shortage. These devices will return queue full at varying
100 * depths. The driver will throttle back when the queue fulls occur and
101 * attempt to slowly increase the depth over time as the device recovers
102 * from the resource shortage.
103 *
104 * In this example, the first line will disable tagged queueing for all
105 * the devices on the first probed aic79xx adapter.
106 *
107 * The second line enables tagged queueing with 4 commands/LUN for IDs
108 * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
109 * driver to attempt to use up to 64 tags for ID 1.
110 *
111 * The third line is the same as the first line.
112 *
113 * The fourth line disables tagged queueing for devices 0 and 3. It
114 * enables tagged queueing for the other IDs, with 16 commands/LUN
115 * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
116 * IDs 2, 5-7, and 9-15.
117 */
118
119 /*
120 * NOTE: The below structure is for reference only, the actual structure
121 * to modify in order to change things is just below this comment block.
122 adapter_tag_info_t aic79xx_tag_info[] =
123 {
124 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
125 {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
126 {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
127 {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
128 };
129 */
130
131 #ifdef CONFIG_AIC79XX_CMDS_PER_DEVICE
132 #define AIC79XX_CMDS_PER_DEVICE CONFIG_AIC79XX_CMDS_PER_DEVICE
133 #else
134 #define AIC79XX_CMDS_PER_DEVICE AHD_MAX_QUEUE
135 #endif
136
137 #define AIC79XX_CONFIGED_TAG_COMMANDS { \
138 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
139 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
140 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
141 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
142 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
143 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
144 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE, \
145 AIC79XX_CMDS_PER_DEVICE, AIC79XX_CMDS_PER_DEVICE \
146 }
147
148 /*
149 * By default, use the number of commands specified by
150 * the users kernel configuration.
151 */
152 static adapter_tag_info_t aic79xx_tag_info[] =
153 {
154 {AIC79XX_CONFIGED_TAG_COMMANDS},
155 {AIC79XX_CONFIGED_TAG_COMMANDS},
156 {AIC79XX_CONFIGED_TAG_COMMANDS},
157 {AIC79XX_CONFIGED_TAG_COMMANDS},
158 {AIC79XX_CONFIGED_TAG_COMMANDS},
159 {AIC79XX_CONFIGED_TAG_COMMANDS},
160 {AIC79XX_CONFIGED_TAG_COMMANDS},
161 {AIC79XX_CONFIGED_TAG_COMMANDS},
162 {AIC79XX_CONFIGED_TAG_COMMANDS},
163 {AIC79XX_CONFIGED_TAG_COMMANDS},
164 {AIC79XX_CONFIGED_TAG_COMMANDS},
165 {AIC79XX_CONFIGED_TAG_COMMANDS},
166 {AIC79XX_CONFIGED_TAG_COMMANDS},
167 {AIC79XX_CONFIGED_TAG_COMMANDS},
168 {AIC79XX_CONFIGED_TAG_COMMANDS},
169 {AIC79XX_CONFIGED_TAG_COMMANDS}
170 };
171
172 /*
173 * The I/O cell on the chip is very configurable in respect to its analog
174 * characteristics. Set the defaults here; they can be overriden with
175 * the proper insmod parameters.
176 */
177 struct ahd_linux_iocell_opts
178 {
179 uint8_t precomp;
180 uint8_t slewrate;
181 uint8_t amplitude;
182 };
183 #define AIC79XX_DEFAULT_PRECOMP 0xFF
184 #define AIC79XX_DEFAULT_SLEWRATE 0xFF
185 #define AIC79XX_DEFAULT_AMPLITUDE 0xFF
186 #define AIC79XX_DEFAULT_IOOPTS \
187 { \
188 AIC79XX_DEFAULT_PRECOMP, \
189 AIC79XX_DEFAULT_SLEWRATE, \
190 AIC79XX_DEFAULT_AMPLITUDE \
191 }
192 #define AIC79XX_PRECOMP_INDEX 0
193 #define AIC79XX_SLEWRATE_INDEX 1
194 #define AIC79XX_AMPLITUDE_INDEX 2
195 static struct ahd_linux_iocell_opts aic79xx_iocell_info[] =
196 {
197 AIC79XX_DEFAULT_IOOPTS,
198 AIC79XX_DEFAULT_IOOPTS,
199 AIC79XX_DEFAULT_IOOPTS,
200 AIC79XX_DEFAULT_IOOPTS,
201 AIC79XX_DEFAULT_IOOPTS,
202 AIC79XX_DEFAULT_IOOPTS,
203 AIC79XX_DEFAULT_IOOPTS,
204 AIC79XX_DEFAULT_IOOPTS,
205 AIC79XX_DEFAULT_IOOPTS,
206 AIC79XX_DEFAULT_IOOPTS,
207 AIC79XX_DEFAULT_IOOPTS,
208 AIC79XX_DEFAULT_IOOPTS,
209 AIC79XX_DEFAULT_IOOPTS,
210 AIC79XX_DEFAULT_IOOPTS,
211 AIC79XX_DEFAULT_IOOPTS,
212 AIC79XX_DEFAULT_IOOPTS
213 };
214
215 /*
216 * There should be a specific return value for this in scsi.h, but
217 * it seems that most drivers ignore it.
218 */
219 #define DID_UNDERFLOW DID_ERROR
220
221 void
222 ahd_print_path(struct ahd_softc *ahd, struct scb *scb)
223 {
224 printk("(scsi%d:%c:%d:%d): ",
225 ahd->platform_data->host->host_no,
226 scb != NULL ? SCB_GET_CHANNEL(ahd, scb) : 'X',
227 scb != NULL ? SCB_GET_TARGET(ahd, scb) : -1,
228 scb != NULL ? SCB_GET_LUN(scb) : -1);
229 }
230
231 /*
232 * XXX - these options apply unilaterally to _all_ adapters
233 * cards in the system. This should be fixed. Exceptions to this
234 * rule are noted in the comments.
235 */
236
237 /*
238 * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
239 * has no effect on any later resets that might occur due to things like
240 * SCSI bus timeouts.
241 */
242 static uint32_t aic79xx_no_reset;
243
244 /*
245 * Certain PCI motherboards will scan PCI devices from highest to lowest,
246 * others scan from lowest to highest, and they tend to do all kinds of
247 * strange things when they come into contact with PCI bridge chips. The
248 * net result of all this is that the PCI card that is actually used to boot
249 * the machine is very hard to detect. Most motherboards go from lowest
250 * PCI slot number to highest, and the first SCSI controller found is the
251 * one you boot from. The only exceptions to this are when a controller
252 * has its BIOS disabled. So, we by default sort all of our SCSI controllers
253 * from lowest PCI slot number to highest PCI slot number. We also force
254 * all controllers with their BIOS disabled to the end of the list. This
255 * works on *almost* all computers. Where it doesn't work, we have this
256 * option. Setting this option to non-0 will reverse the order of the sort
257 * to highest first, then lowest, but will still leave cards with their BIOS
258 * disabled at the very end. That should fix everyone up unless there are
259 * really strange cirumstances.
260 */
261 static uint32_t aic79xx_reverse_scan;
262
263 /*
264 * Should we force EXTENDED translation on a controller.
265 * 0 == Use whatever is in the SEEPROM or default to off
266 * 1 == Use whatever is in the SEEPROM or default to on
267 */
268 static uint32_t aic79xx_extended;
269
270 /*
271 * PCI bus parity checking of the Adaptec controllers. This is somewhat
272 * dubious at best. To my knowledge, this option has never actually
273 * solved a PCI parity problem, but on certain machines with broken PCI
274 * chipset configurations, it can generate tons of false error messages.
275 * It's included in the driver for completeness.
276 * 0 = Shut off PCI parity check
277 * non-0 = Enable PCI parity check
278 *
279 * NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
280 * variable to -1 you would actually want to simply pass the variable
281 * name without a number. That will invert the 0 which will result in
282 * -1.
283 */
284 static uint32_t aic79xx_pci_parity = ~0;
285
286 /*
287 * There are lots of broken chipsets in the world. Some of them will
288 * violate the PCI spec when we issue byte sized memory writes to our
289 * controller. I/O mapped register access, if allowed by the given
290 * platform, will work in almost all cases.
291 */
292 uint32_t aic79xx_allow_memio = ~0;
293
294 /*
295 * So that we can set how long each device is given as a selection timeout.
296 * The table of values goes like this:
297 * 0 - 256ms
298 * 1 - 128ms
299 * 2 - 64ms
300 * 3 - 32ms
301 * We default to 256ms because some older devices need a longer time
302 * to respond to initial selection.
303 */
304 static uint32_t aic79xx_seltime;
305
306 /*
307 * Certain devices do not perform any aging on commands. Should the
308 * device be saturated by commands in one portion of the disk, it is
309 * possible for transactions on far away sectors to never be serviced.
310 * To handle these devices, we can periodically send an ordered tag to
311 * force all outstanding transactions to be serviced prior to a new
312 * transaction.
313 */
314 uint32_t aic79xx_periodic_otag;
315
316 /*
317 * Module information and settable options.
318 */
319 static char *aic79xx = NULL;
320
321 MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>");
322 MODULE_DESCRIPTION("Adaptec Aic790X U320 SCSI Host Bus Adapter driver");
323 MODULE_LICENSE("Dual BSD/GPL");
324 MODULE_VERSION(AIC79XX_DRIVER_VERSION);
325 module_param(aic79xx, charp, 0444);
326 MODULE_PARM_DESC(aic79xx,
327 "period delimited, options string.\n"
328 " verbose Enable verbose/diagnostic logging\n"
329 " allow_memio Allow device registers to be memory mapped\n"
330 " debug Bitmask of debug values to enable\n"
331 " no_reset Supress initial bus resets\n"
332 " extended Enable extended geometry on all controllers\n"
333 " periodic_otag Send an ordered tagged transaction\n"
334 " periodically to prevent tag starvation.\n"
335 " This may be required by some older disk\n"
336 " or drives/RAID arrays.\n"
337 " reverse_scan Sort PCI devices highest Bus/Slot to lowest\n"
338 " tag_info:<tag_str> Set per-target tag depth\n"
339 " global_tag_depth:<int> Global tag depth for all targets on all buses\n"
340 " slewrate:<slewrate_list>Set the signal slew rate (0-15).\n"
341 " precomp:<pcomp_list> Set the signal precompensation (0-7).\n"
342 " amplitude:<int> Set the signal amplitude (0-7).\n"
343 " seltime:<int> Selection Timeout:\n"
344 " (0/256ms,1/128ms,2/64ms,3/32ms)\n"
345 "\n"
346 " Sample /etc/modprobe.conf line:\n"
347 " Enable verbose logging\n"
348 " Set tag depth on Controller 2/Target 2 to 10 tags\n"
349 " Shorten the selection timeout to 128ms\n"
350 "\n"
351 " options aic79xx 'aic79xx=verbose.tag_info:{{}.{}.{..10}}.seltime:1'\n"
352 "\n");
353
354 static void ahd_linux_handle_scsi_status(struct ahd_softc *,
355 struct scsi_device *,
356 struct scb *);
357 static void ahd_linux_queue_cmd_complete(struct ahd_softc *ahd,
358 struct scsi_cmnd *cmd);
359 static void ahd_linux_sem_timeout(u_long arg);
360 static int ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag);
361 static void ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd);
362 static u_int ahd_linux_user_tagdepth(struct ahd_softc *ahd,
363 struct ahd_devinfo *devinfo);
364 static void ahd_linux_device_queue_depth(struct scsi_device *);
365 static int ahd_linux_run_command(struct ahd_softc*,
366 struct ahd_linux_device *,
367 struct scsi_cmnd *);
368 static void ahd_linux_setup_tag_info_global(char *p);
369 static int aic79xx_setup(char *c);
370
371 static int ahd_linux_unit;
372
373
374 /****************************** Inlines ***************************************/
375 static __inline void ahd_linux_unmap_scb(struct ahd_softc*, struct scb*);
376
377 static __inline void
378 ahd_linux_unmap_scb(struct ahd_softc *ahd, struct scb *scb)
379 {
380 struct scsi_cmnd *cmd;
381 int direction;
382
383 cmd = scb->io_ctx;
384 direction = cmd->sc_data_direction;
385 ahd_sync_sglist(ahd, scb, BUS_DMASYNC_POSTWRITE);
386 if (cmd->use_sg != 0) {
387 struct scatterlist *sg;
388
389 sg = (struct scatterlist *)cmd->request_buffer;
390 pci_unmap_sg(ahd->dev_softc, sg, cmd->use_sg, direction);
391 } else if (cmd->request_bufflen != 0) {
392 pci_unmap_single(ahd->dev_softc,
393 scb->platform_data->buf_busaddr,
394 cmd->request_bufflen, direction);
395 }
396 }
397
398 /******************************** Macros **************************************/
399 #define BUILD_SCSIID(ahd, cmd) \
400 ((((cmd)->device->id << TID_SHIFT) & TID) | (ahd)->our_id)
401
402 /*
403 * Return a string describing the driver.
404 */
405 static const char *
406 ahd_linux_info(struct Scsi_Host *host)
407 {
408 static char buffer[512];
409 char ahd_info[256];
410 char *bp;
411 struct ahd_softc *ahd;
412
413 bp = &buffer[0];
414 ahd = *(struct ahd_softc **)host->hostdata;
415 memset(bp, 0, sizeof(buffer));
416 strcpy(bp, "Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev ");
417 strcat(bp, AIC79XX_DRIVER_VERSION);
418 strcat(bp, "\n");
419 strcat(bp, " <");
420 strcat(bp, ahd->description);
421 strcat(bp, ">\n");
422 strcat(bp, " ");
423 ahd_controller_info(ahd, ahd_info);
424 strcat(bp, ahd_info);
425 strcat(bp, "\n");
426
427 return (bp);
428 }
429
430 /*
431 * Queue an SCB to the controller.
432 */
433 static int
434 ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
435 {
436 struct ahd_softc *ahd;
437 struct ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
438
439 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
440
441 /*
442 * Close the race of a command that was in the process of
443 * being queued to us just as our simq was frozen. Let
444 * DV commands through so long as we are only frozen to
445 * perform DV.
446 */
447 if (ahd->platform_data->qfrozen != 0) {
448 printf("%s: queue frozen\n", ahd_name(ahd));
449
450 return SCSI_MLQUEUE_HOST_BUSY;
451 }
452
453 /*
454 * Save the callback on completion function.
455 */
456 cmd->scsi_done = scsi_done;
457
458 cmd->result = CAM_REQ_INPROG << 16;
459
460 return ahd_linux_run_command(ahd, dev, cmd);
461 }
462
463 static inline struct scsi_target **
464 ahd_linux_target_in_softc(struct scsi_target *starget)
465 {
466 struct ahd_softc *ahd =
467 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
468 unsigned int target_offset;
469
470 target_offset = starget->id;
471 if (starget->channel != 0)
472 target_offset += 8;
473
474 return &ahd->platform_data->starget[target_offset];
475 }
476
477 static int
478 ahd_linux_target_alloc(struct scsi_target *starget)
479 {
480 struct ahd_softc *ahd =
481 *((struct ahd_softc **)dev_to_shost(&starget->dev)->hostdata);
482 unsigned long flags;
483 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
484 struct ahd_linux_target *targ = scsi_transport_target_data(starget);
485 struct ahd_devinfo devinfo;
486 struct ahd_initiator_tinfo *tinfo;
487 struct ahd_tmode_tstate *tstate;
488 char channel = starget->channel + 'A';
489
490 ahd_lock(ahd, &flags);
491
492 BUG_ON(*ahd_targp != NULL);
493
494 *ahd_targp = starget;
495 memset(targ, 0, sizeof(*targ));
496
497 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
498 starget->id, &tstate);
499 ahd_compile_devinfo(&devinfo, ahd->our_id, starget->id,
500 CAM_LUN_WILDCARD, channel,
501 ROLE_INITIATOR);
502 spi_min_period(starget) = AHD_SYNCRATE_MAX; /* We can do U320 */
503 if ((ahd->bugs & AHD_PACED_NEGTABLE_BUG) != 0)
504 spi_max_offset(starget) = MAX_OFFSET_PACED_BUG;
505 else
506 spi_max_offset(starget) = MAX_OFFSET_PACED;
507 spi_max_width(starget) = ahd->features & AHD_WIDE;
508
509 ahd_set_syncrate(ahd, &devinfo, 0, 0, 0,
510 AHD_TRANS_GOAL, /*paused*/FALSE);
511 ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
512 AHD_TRANS_GOAL, /*paused*/FALSE);
513 ahd_unlock(ahd, &flags);
514
515 return 0;
516 }
517
518 static void
519 ahd_linux_target_destroy(struct scsi_target *starget)
520 {
521 struct scsi_target **ahd_targp = ahd_linux_target_in_softc(starget);
522
523 *ahd_targp = NULL;
524 }
525
526 static int
527 ahd_linux_slave_alloc(struct scsi_device *sdev)
528 {
529 struct ahd_softc *ahd =
530 *((struct ahd_softc **)sdev->host->hostdata);
531 struct scsi_target *starget = sdev->sdev_target;
532 struct ahd_linux_target *targ = scsi_transport_target_data(starget);
533 struct ahd_linux_device *dev;
534
535 if (bootverbose)
536 printf("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
537
538 BUG_ON(targ->sdev[sdev->lun] != NULL);
539
540 dev = scsi_transport_device_data(sdev);
541 memset(dev, 0, sizeof(*dev));
542
543 /*
544 * We start out life using untagged
545 * transactions of which we allow one.
546 */
547 dev->openings = 1;
548
549 /*
550 * Set maxtags to 0. This will be changed if we
551 * later determine that we are dealing with
552 * a tagged queuing capable device.
553 */
554 dev->maxtags = 0;
555
556 targ->sdev[sdev->lun] = sdev;
557
558 return (0);
559 }
560
561 static int
562 ahd_linux_slave_configure(struct scsi_device *sdev)
563 {
564 struct ahd_softc *ahd;
565
566 ahd = *((struct ahd_softc **)sdev->host->hostdata);
567 if (bootverbose)
568 printf("%s: Slave Configure %d\n", ahd_name(ahd), sdev->id);
569
570 ahd_linux_device_queue_depth(sdev);
571
572 /* Initial Domain Validation */
573 if (!spi_initial_dv(sdev->sdev_target))
574 spi_dv_device(sdev);
575
576 return 0;
577 }
578
579 static void
580 ahd_linux_slave_destroy(struct scsi_device *sdev)
581 {
582 struct ahd_softc *ahd;
583 struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
584 struct ahd_linux_target *targ = scsi_transport_target_data(sdev->sdev_target);
585
586 ahd = *((struct ahd_softc **)sdev->host->hostdata);
587 if (bootverbose)
588 printf("%s: Slave Destroy %d\n", ahd_name(ahd), sdev->id);
589
590 BUG_ON(dev->active);
591
592 targ->sdev[sdev->lun] = NULL;
593
594 }
595
596 #if defined(__i386__)
597 /*
598 * Return the disk geometry for the given SCSI device.
599 */
600 static int
601 ahd_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev,
602 sector_t capacity, int geom[])
603 {
604 uint8_t *bh;
605 int heads;
606 int sectors;
607 int cylinders;
608 int ret;
609 int extended;
610 struct ahd_softc *ahd;
611
612 ahd = *((struct ahd_softc **)sdev->host->hostdata);
613
614 bh = scsi_bios_ptable(bdev);
615 if (bh) {
616 ret = scsi_partsize(bh, capacity,
617 &geom[2], &geom[0], &geom[1]);
618 kfree(bh);
619 if (ret != -1)
620 return (ret);
621 }
622 heads = 64;
623 sectors = 32;
624 cylinders = aic_sector_div(capacity, heads, sectors);
625
626 if (aic79xx_extended != 0)
627 extended = 1;
628 else
629 extended = (ahd->flags & AHD_EXTENDED_TRANS_A) != 0;
630 if (extended && cylinders >= 1024) {
631 heads = 255;
632 sectors = 63;
633 cylinders = aic_sector_div(capacity, heads, sectors);
634 }
635 geom[0] = heads;
636 geom[1] = sectors;
637 geom[2] = cylinders;
638 return (0);
639 }
640 #endif
641
642 /*
643 * Abort the current SCSI command(s).
644 */
645 static int
646 ahd_linux_abort(struct scsi_cmnd *cmd)
647 {
648 int error;
649
650 error = ahd_linux_queue_recovery_cmd(cmd, SCB_ABORT);
651 if (error != 0)
652 printf("aic79xx_abort returns 0x%x\n", error);
653 return error;
654 }
655
656 /*
657 * Attempt to send a target reset message to the device that timed out.
658 */
659 static int
660 ahd_linux_dev_reset(struct scsi_cmnd *cmd)
661 {
662 int error;
663
664 error = ahd_linux_queue_recovery_cmd(cmd, SCB_DEVICE_RESET);
665 if (error != 0)
666 printf("aic79xx_dev_reset returns 0x%x\n", error);
667 return error;
668 }
669
670 /*
671 * Reset the SCSI bus.
672 */
673 static int
674 ahd_linux_bus_reset(struct scsi_cmnd *cmd)
675 {
676 struct ahd_softc *ahd;
677 u_long s;
678 int found;
679
680 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
681 #ifdef AHD_DEBUG
682 if ((ahd_debug & AHD_SHOW_RECOVERY) != 0)
683 printf("%s: Bus reset called for cmd %p\n",
684 ahd_name(ahd), cmd);
685 #endif
686 ahd_lock(ahd, &s);
687 found = ahd_reset_channel(ahd, cmd->device->channel + 'A',
688 /*initiate reset*/TRUE);
689 ahd_unlock(ahd, &s);
690
691 if (bootverbose)
692 printf("%s: SCSI bus reset delivered. "
693 "%d SCBs aborted.\n", ahd_name(ahd), found);
694
695 return (SUCCESS);
696 }
697
698 struct scsi_host_template aic79xx_driver_template = {
699 .module = THIS_MODULE,
700 .name = "aic79xx",
701 .proc_name = "aic79xx",
702 .proc_info = ahd_linux_proc_info,
703 .info = ahd_linux_info,
704 .queuecommand = ahd_linux_queue,
705 .eh_abort_handler = ahd_linux_abort,
706 .eh_device_reset_handler = ahd_linux_dev_reset,
707 .eh_bus_reset_handler = ahd_linux_bus_reset,
708 #if defined(__i386__)
709 .bios_param = ahd_linux_biosparam,
710 #endif
711 .can_queue = AHD_MAX_QUEUE,
712 .this_id = -1,
713 .cmd_per_lun = 2,
714 .use_clustering = ENABLE_CLUSTERING,
715 .slave_alloc = ahd_linux_slave_alloc,
716 .slave_configure = ahd_linux_slave_configure,
717 .slave_destroy = ahd_linux_slave_destroy,
718 .target_alloc = ahd_linux_target_alloc,
719 .target_destroy = ahd_linux_target_destroy,
720 };
721
722 /******************************** Bus DMA *************************************/
723 int
724 ahd_dma_tag_create(struct ahd_softc *ahd, bus_dma_tag_t parent,
725 bus_size_t alignment, bus_size_t boundary,
726 dma_addr_t lowaddr, dma_addr_t highaddr,
727 bus_dma_filter_t *filter, void *filterarg,
728 bus_size_t maxsize, int nsegments,
729 bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
730 {
731 bus_dma_tag_t dmat;
732
733 dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
734 if (dmat == NULL)
735 return (ENOMEM);
736
737 /*
738 * Linux is very simplistic about DMA memory. For now don't
739 * maintain all specification information. Once Linux supplies
740 * better facilities for doing these operations, or the
741 * needs of this particular driver change, we might need to do
742 * more here.
743 */
744 dmat->alignment = alignment;
745 dmat->boundary = boundary;
746 dmat->maxsize = maxsize;
747 *ret_tag = dmat;
748 return (0);
749 }
750
751 void
752 ahd_dma_tag_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat)
753 {
754 free(dmat, M_DEVBUF);
755 }
756
757 int
758 ahd_dmamem_alloc(struct ahd_softc *ahd, bus_dma_tag_t dmat, void** vaddr,
759 int flags, bus_dmamap_t *mapp)
760 {
761 *vaddr = pci_alloc_consistent(ahd->dev_softc,
762 dmat->maxsize, mapp);
763 if (*vaddr == NULL)
764 return (ENOMEM);
765 return(0);
766 }
767
768 void
769 ahd_dmamem_free(struct ahd_softc *ahd, bus_dma_tag_t dmat,
770 void* vaddr, bus_dmamap_t map)
771 {
772 pci_free_consistent(ahd->dev_softc, dmat->maxsize,
773 vaddr, map);
774 }
775
776 int
777 ahd_dmamap_load(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map,
778 void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
779 void *cb_arg, int flags)
780 {
781 /*
782 * Assume for now that this will only be used during
783 * initialization and not for per-transaction buffer mapping.
784 */
785 bus_dma_segment_t stack_sg;
786
787 stack_sg.ds_addr = map;
788 stack_sg.ds_len = dmat->maxsize;
789 cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
790 return (0);
791 }
792
793 void
794 ahd_dmamap_destroy(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
795 {
796 }
797
798 int
799 ahd_dmamap_unload(struct ahd_softc *ahd, bus_dma_tag_t dmat, bus_dmamap_t map)
800 {
801 /* Nothing to do */
802 return (0);
803 }
804
805 /********************* Platform Dependent Functions ***************************/
806 /*
807 * Compare "left hand" softc with "right hand" softc, returning:
808 * < 0 - lahd has a lower priority than rahd
809 * 0 - Softcs are equal
810 * > 0 - lahd has a higher priority than rahd
811 */
812 int
813 ahd_softc_comp(struct ahd_softc *lahd, struct ahd_softc *rahd)
814 {
815 int value;
816
817 /*
818 * Under Linux, cards are ordered as follows:
819 * 1) PCI devices that are marked as the boot controller.
820 * 2) PCI devices with BIOS enabled sorted by bus/slot/func.
821 * 3) All remaining PCI devices sorted by bus/slot/func.
822 */
823 #if 0
824 value = (lahd->flags & AHD_BOOT_CHANNEL)
825 - (rahd->flags & AHD_BOOT_CHANNEL);
826 if (value != 0)
827 /* Controllers set for boot have a *higher* priority */
828 return (value);
829 #endif
830
831 value = (lahd->flags & AHD_BIOS_ENABLED)
832 - (rahd->flags & AHD_BIOS_ENABLED);
833 if (value != 0)
834 /* Controllers with BIOS enabled have a *higher* priority */
835 return (value);
836
837 /* Still equal. Sort by bus/slot/func. */
838 if (aic79xx_reverse_scan != 0)
839 value = ahd_get_pci_bus(lahd->dev_softc)
840 - ahd_get_pci_bus(rahd->dev_softc);
841 else
842 value = ahd_get_pci_bus(rahd->dev_softc)
843 - ahd_get_pci_bus(lahd->dev_softc);
844 if (value != 0)
845 return (value);
846 if (aic79xx_reverse_scan != 0)
847 value = ahd_get_pci_slot(lahd->dev_softc)
848 - ahd_get_pci_slot(rahd->dev_softc);
849 else
850 value = ahd_get_pci_slot(rahd->dev_softc)
851 - ahd_get_pci_slot(lahd->dev_softc);
852 if (value != 0)
853 return (value);
854
855 value = rahd->channel - lahd->channel;
856 return (value);
857 }
858
859 static void
860 ahd_linux_setup_iocell_info(u_long index, int instance, int targ, int32_t value)
861 {
862
863 if ((instance >= 0)
864 && (instance < NUM_ELEMENTS(aic79xx_iocell_info))) {
865 uint8_t *iocell_info;
866
867 iocell_info = (uint8_t*)&aic79xx_iocell_info[instance];
868 iocell_info[index] = value & 0xFFFF;
869 if (bootverbose)
870 printf("iocell[%d:%ld] = %d\n", instance, index, value);
871 }
872 }
873
874 static void
875 ahd_linux_setup_tag_info_global(char *p)
876 {
877 int tags, i, j;
878
879 tags = simple_strtoul(p + 1, NULL, 0) & 0xff;
880 printf("Setting Global Tags= %d\n", tags);
881
882 for (i = 0; i < NUM_ELEMENTS(aic79xx_tag_info); i++) {
883 for (j = 0; j < AHD_NUM_TARGETS; j++) {
884 aic79xx_tag_info[i].tag_commands[j] = tags;
885 }
886 }
887 }
888
889 static void
890 ahd_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value)
891 {
892
893 if ((instance >= 0) && (targ >= 0)
894 && (instance < NUM_ELEMENTS(aic79xx_tag_info))
895 && (targ < AHD_NUM_TARGETS)) {
896 aic79xx_tag_info[instance].tag_commands[targ] = value & 0x1FF;
897 if (bootverbose)
898 printf("tag_info[%d:%d] = %d\n", instance, targ, value);
899 }
900 }
901
902 static char *
903 ahd_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
904 void (*callback)(u_long, int, int, int32_t),
905 u_long callback_arg)
906 {
907 char *tok_end;
908 char *tok_end2;
909 int i;
910 int instance;
911 int targ;
912 int done;
913 char tok_list[] = {'.', ',', '{', '}', '\0'};
914
915 /* All options use a ':' name/arg separator */
916 if (*opt_arg != ':')
917 return (opt_arg);
918 opt_arg++;
919 instance = -1;
920 targ = -1;
921 done = FALSE;
922 /*
923 * Restore separator that may be in
924 * the middle of our option argument.
925 */
926 tok_end = strchr(opt_arg, '\0');
927 if (tok_end < end)
928 *tok_end = ',';
929 while (!done) {
930 switch (*opt_arg) {
931 case '{':
932 if (instance == -1) {
933 instance = 0;
934 } else {
935 if (depth > 1) {
936 if (targ == -1)
937 targ = 0;
938 } else {
939 printf("Malformed Option %s\n",
940 opt_name);
941 done = TRUE;
942 }
943 }
944 opt_arg++;
945 break;
946 case '}':
947 if (targ != -1)
948 targ = -1;
949 else if (instance != -1)
950 instance = -1;
951 opt_arg++;
952 break;
953 case ',':
954 case '.':
955 if (instance == -1)
956 done = TRUE;
957 else if (targ >= 0)
958 targ++;
959 else if (instance >= 0)
960 instance++;
961 opt_arg++;
962 break;
963 case '\0':
964 done = TRUE;
965 break;
966 default:
967 tok_end = end;
968 for (i = 0; tok_list[i]; i++) {
969 tok_end2 = strchr(opt_arg, tok_list[i]);
970 if ((tok_end2) && (tok_end2 < tok_end))
971 tok_end = tok_end2;
972 }
973 callback(callback_arg, instance, targ,
974 simple_strtol(opt_arg, NULL, 0));
975 opt_arg = tok_end;
976 break;
977 }
978 }
979 return (opt_arg);
980 }
981
982 /*
983 * Handle Linux boot parameters. This routine allows for assigning a value
984 * to a parameter with a ':' between the parameter and the value.
985 * ie. aic79xx=stpwlev:1,extended
986 */
987 static int
988 aic79xx_setup(char *s)
989 {
990 int i, n;
991 char *p;
992 char *end;
993
994 static struct {
995 const char *name;
996 uint32_t *flag;
997 } options[] = {
998 { "extended", &aic79xx_extended },
999 { "no_reset", &aic79xx_no_reset },
1000 { "verbose", &aic79xx_verbose },
1001 { "allow_memio", &aic79xx_allow_memio},
1002 #ifdef AHD_DEBUG
1003 { "debug", &ahd_debug },
1004 #endif
1005 { "reverse_scan", &aic79xx_reverse_scan },
1006 { "periodic_otag", &aic79xx_periodic_otag },
1007 { "pci_parity", &aic79xx_pci_parity },
1008 { "seltime", &aic79xx_seltime },
1009 { "tag_info", NULL },
1010 { "global_tag_depth", NULL},
1011 { "slewrate", NULL },
1012 { "precomp", NULL },
1013 { "amplitude", NULL },
1014 };
1015
1016 end = strchr(s, '\0');
1017
1018 /*
1019 * XXX ia64 gcc isn't smart enough to know that NUM_ELEMENTS
1020 * will never be 0 in this case.
1021 */
1022 n = 0;
1023
1024 while ((p = strsep(&s, ",.")) != NULL) {
1025 if (*p == '\0')
1026 continue;
1027 for (i = 0; i < NUM_ELEMENTS(options); i++) {
1028
1029 n = strlen(options[i].name);
1030 if (strncmp(options[i].name, p, n) == 0)
1031 break;
1032 }
1033 if (i == NUM_ELEMENTS(options))
1034 continue;
1035
1036 if (strncmp(p, "global_tag_depth", n) == 0) {
1037 ahd_linux_setup_tag_info_global(p + n);
1038 } else if (strncmp(p, "tag_info", n) == 0) {
1039 s = ahd_parse_brace_option("tag_info", p + n, end,
1040 2, ahd_linux_setup_tag_info, 0);
1041 } else if (strncmp(p, "slewrate", n) == 0) {
1042 s = ahd_parse_brace_option("slewrate",
1043 p + n, end, 1, ahd_linux_setup_iocell_info,
1044 AIC79XX_SLEWRATE_INDEX);
1045 } else if (strncmp(p, "precomp", n) == 0) {
1046 s = ahd_parse_brace_option("precomp",
1047 p + n, end, 1, ahd_linux_setup_iocell_info,
1048 AIC79XX_PRECOMP_INDEX);
1049 } else if (strncmp(p, "amplitude", n) == 0) {
1050 s = ahd_parse_brace_option("amplitude",
1051 p + n, end, 1, ahd_linux_setup_iocell_info,
1052 AIC79XX_AMPLITUDE_INDEX);
1053 } else if (p[n] == ':') {
1054 *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0);
1055 } else if (!strncmp(p, "verbose", n)) {
1056 *(options[i].flag) = 1;
1057 } else {
1058 *(options[i].flag) ^= 0xFFFFFFFF;
1059 }
1060 }
1061 return 1;
1062 }
1063
1064 __setup("aic79xx=", aic79xx_setup);
1065
1066 uint32_t aic79xx_verbose;
1067
1068 int
1069 ahd_linux_register_host(struct ahd_softc *ahd, struct scsi_host_template *template)
1070 {
1071 char buf[80];
1072 struct Scsi_Host *host;
1073 char *new_name;
1074 u_long s;
1075
1076 template->name = ahd->description;
1077 host = scsi_host_alloc(template, sizeof(struct ahd_softc *));
1078 if (host == NULL)
1079 return (ENOMEM);
1080
1081 *((struct ahd_softc **)host->hostdata) = ahd;
1082 ahd_lock(ahd, &s);
1083 scsi_assign_lock(host, &ahd->platform_data->spin_lock);
1084 ahd->platform_data->host = host;
1085 host->can_queue = AHD_MAX_QUEUE;
1086 host->cmd_per_lun = 2;
1087 host->sg_tablesize = AHD_NSEG;
1088 host->this_id = ahd->our_id;
1089 host->irq = ahd->platform_data->irq;
1090 host->max_id = (ahd->features & AHD_WIDE) ? 16 : 8;
1091 host->max_lun = AHD_NUM_LUNS;
1092 host->max_channel = 0;
1093 host->sg_tablesize = AHD_NSEG;
1094 ahd_set_unit(ahd, ahd_linux_unit++);
1095 sprintf(buf, "scsi%d", host->host_no);
1096 new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
1097 if (new_name != NULL) {
1098 strcpy(new_name, buf);
1099 ahd_set_name(ahd, new_name);
1100 }
1101 host->unique_id = ahd->unit;
1102 ahd_linux_initialize_scsi_bus(ahd);
1103 ahd_intr_enable(ahd, TRUE);
1104 ahd_unlock(ahd, &s);
1105
1106 host->transportt = ahd_linux_transport_template;
1107
1108 scsi_add_host(host, &ahd->dev_softc->dev); /* XXX handle failure */
1109 scsi_scan_host(host);
1110 return (0);
1111 }
1112
1113 uint64_t
1114 ahd_linux_get_memsize(void)
1115 {
1116 struct sysinfo si;
1117
1118 si_meminfo(&si);
1119 return ((uint64_t)si.totalram << PAGE_SHIFT);
1120 }
1121
1122 /*
1123 * Place the SCSI bus into a known state by either resetting it,
1124 * or forcing transfer negotiations on the next command to any
1125 * target.
1126 */
1127 static void
1128 ahd_linux_initialize_scsi_bus(struct ahd_softc *ahd)
1129 {
1130 u_int target_id;
1131 u_int numtarg;
1132
1133 target_id = 0;
1134 numtarg = 0;
1135
1136 if (aic79xx_no_reset != 0)
1137 ahd->flags &= ~AHD_RESET_BUS_A;
1138
1139 if ((ahd->flags & AHD_RESET_BUS_A) != 0)
1140 ahd_reset_channel(ahd, 'A', /*initiate_reset*/TRUE);
1141 else
1142 numtarg = (ahd->features & AHD_WIDE) ? 16 : 8;
1143
1144 /*
1145 * Force negotiation to async for all targets that
1146 * will not see an initial bus reset.
1147 */
1148 for (; target_id < numtarg; target_id++) {
1149 struct ahd_devinfo devinfo;
1150 struct ahd_initiator_tinfo *tinfo;
1151 struct ahd_tmode_tstate *tstate;
1152
1153 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1154 target_id, &tstate);
1155 ahd_compile_devinfo(&devinfo, ahd->our_id, target_id,
1156 CAM_LUN_WILDCARD, 'A', ROLE_INITIATOR);
1157 ahd_update_neg_request(ahd, &devinfo, tstate,
1158 tinfo, AHD_NEG_ALWAYS);
1159 }
1160 /* Give the bus some time to recover */
1161 if ((ahd->flags & AHD_RESET_BUS_A) != 0) {
1162 ahd_freeze_simq(ahd);
1163 init_timer(&ahd->platform_data->reset_timer);
1164 ahd->platform_data->reset_timer.data = (u_long)ahd;
1165 ahd->platform_data->reset_timer.expires =
1166 jiffies + (AIC79XX_RESET_DELAY * HZ)/1000;
1167 ahd->platform_data->reset_timer.function =
1168 (ahd_linux_callback_t *)ahd_release_simq;
1169 add_timer(&ahd->platform_data->reset_timer);
1170 }
1171 }
1172
1173 int
1174 ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
1175 {
1176 ahd->platform_data =
1177 malloc(sizeof(struct ahd_platform_data), M_DEVBUF, M_NOWAIT);
1178 if (ahd->platform_data == NULL)
1179 return (ENOMEM);
1180 memset(ahd->platform_data, 0, sizeof(struct ahd_platform_data));
1181 ahd->platform_data->irq = AHD_LINUX_NOIRQ;
1182 ahd_lockinit(ahd);
1183 init_MUTEX_LOCKED(&ahd->platform_data->eh_sem);
1184 ahd->seltime = (aic79xx_seltime & 0x3) << 4;
1185 return (0);
1186 }
1187
1188 void
1189 ahd_platform_free(struct ahd_softc *ahd)
1190 {
1191 struct scsi_target *starget;
1192 int i, j;
1193
1194 if (ahd->platform_data != NULL) {
1195 /* destroy all of the device and target objects */
1196 for (i = 0; i < AHD_NUM_TARGETS; i++) {
1197 starget = ahd->platform_data->starget[i];
1198 if (starget != NULL) {
1199 for (j = 0; j < AHD_NUM_LUNS; j++) {
1200 struct ahd_linux_target *targ =
1201 scsi_transport_target_data(starget);
1202 if (targ->sdev[j] == NULL)
1203 continue;
1204 targ->sdev[j] = NULL;
1205 }
1206 ahd->platform_data->starget[i] = NULL;
1207 }
1208 }
1209
1210 if (ahd->platform_data->irq != AHD_LINUX_NOIRQ)
1211 free_irq(ahd->platform_data->irq, ahd);
1212 if (ahd->tags[0] == BUS_SPACE_PIO
1213 && ahd->bshs[0].ioport != 0)
1214 release_region(ahd->bshs[0].ioport, 256);
1215 if (ahd->tags[1] == BUS_SPACE_PIO
1216 && ahd->bshs[1].ioport != 0)
1217 release_region(ahd->bshs[1].ioport, 256);
1218 if (ahd->tags[0] == BUS_SPACE_MEMIO
1219 && ahd->bshs[0].maddr != NULL) {
1220 iounmap(ahd->bshs[0].maddr);
1221 release_mem_region(ahd->platform_data->mem_busaddr,
1222 0x1000);
1223 }
1224 if (ahd->platform_data->host)
1225 scsi_host_put(ahd->platform_data->host);
1226
1227 free(ahd->platform_data, M_DEVBUF);
1228 }
1229 }
1230
1231 void
1232 ahd_platform_init(struct ahd_softc *ahd)
1233 {
1234 /*
1235 * Lookup and commit any modified IO Cell options.
1236 */
1237 if (ahd->unit < NUM_ELEMENTS(aic79xx_iocell_info)) {
1238 struct ahd_linux_iocell_opts *iocell_opts;
1239
1240 iocell_opts = &aic79xx_iocell_info[ahd->unit];
1241 if (iocell_opts->precomp != AIC79XX_DEFAULT_PRECOMP)
1242 AHD_SET_PRECOMP(ahd, iocell_opts->precomp);
1243 if (iocell_opts->slewrate != AIC79XX_DEFAULT_SLEWRATE)
1244 AHD_SET_SLEWRATE(ahd, iocell_opts->slewrate);
1245 if (iocell_opts->amplitude != AIC79XX_DEFAULT_AMPLITUDE)
1246 AHD_SET_AMPLITUDE(ahd, iocell_opts->amplitude);
1247 }
1248
1249 }
1250
1251 void
1252 ahd_platform_freeze_devq(struct ahd_softc *ahd, struct scb *scb)
1253 {
1254 ahd_platform_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
1255 SCB_GET_CHANNEL(ahd, scb),
1256 SCB_GET_LUN(scb), SCB_LIST_NULL,
1257 ROLE_UNKNOWN, CAM_REQUEUE_REQ);
1258 }
1259
1260 void
1261 ahd_platform_set_tags(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
1262 ahd_queue_alg alg)
1263 {
1264 struct scsi_target *starget;
1265 struct ahd_linux_target *targ;
1266 struct ahd_linux_device *dev;
1267 struct scsi_device *sdev;
1268 int was_queuing;
1269 int now_queuing;
1270
1271 starget = ahd->platform_data->starget[devinfo->target];
1272 targ = scsi_transport_target_data(starget);
1273 BUG_ON(targ == NULL);
1274 sdev = targ->sdev[devinfo->lun];
1275 if (sdev == NULL)
1276 return;
1277
1278 dev = scsi_transport_device_data(sdev);
1279
1280 if (dev == NULL)
1281 return;
1282 was_queuing = dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED);
1283 switch (alg) {
1284 default:
1285 case AHD_QUEUE_NONE:
1286 now_queuing = 0;
1287 break;
1288 case AHD_QUEUE_BASIC:
1289 now_queuing = AHD_DEV_Q_BASIC;
1290 break;
1291 case AHD_QUEUE_TAGGED:
1292 now_queuing = AHD_DEV_Q_TAGGED;
1293 break;
1294 }
1295 if ((dev->flags & AHD_DEV_FREEZE_TIL_EMPTY) == 0
1296 && (was_queuing != now_queuing)
1297 && (dev->active != 0)) {
1298 dev->flags |= AHD_DEV_FREEZE_TIL_EMPTY;
1299 dev->qfrozen++;
1300 }
1301
1302 dev->flags &= ~(AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED|AHD_DEV_PERIODIC_OTAG);
1303 if (now_queuing) {
1304 u_int usertags;
1305
1306 usertags = ahd_linux_user_tagdepth(ahd, devinfo);
1307 if (!was_queuing) {
1308 /*
1309 * Start out agressively and allow our
1310 * dynamic queue depth algorithm to take
1311 * care of the rest.
1312 */
1313 dev->maxtags = usertags;
1314 dev->openings = dev->maxtags - dev->active;
1315 }
1316 if (dev->maxtags == 0) {
1317 /*
1318 * Queueing is disabled by the user.
1319 */
1320 dev->openings = 1;
1321 } else if (alg == AHD_QUEUE_TAGGED) {
1322 dev->flags |= AHD_DEV_Q_TAGGED;
1323 if (aic79xx_periodic_otag != 0)
1324 dev->flags |= AHD_DEV_PERIODIC_OTAG;
1325 } else
1326 dev->flags |= AHD_DEV_Q_BASIC;
1327 } else {
1328 /* We can only have one opening. */
1329 dev->maxtags = 0;
1330 dev->openings = 1 - dev->active;
1331 }
1332
1333 switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
1334 case AHD_DEV_Q_BASIC:
1335 scsi_adjust_queue_depth(sdev,
1336 MSG_SIMPLE_TASK,
1337 dev->openings + dev->active);
1338 break;
1339 case AHD_DEV_Q_TAGGED:
1340 scsi_adjust_queue_depth(sdev,
1341 MSG_ORDERED_TASK,
1342 dev->openings + dev->active);
1343 break;
1344 default:
1345 /*
1346 * We allow the OS to queue 2 untagged transactions to
1347 * us at any time even though we can only execute them
1348 * serially on the controller/device. This should
1349 * remove some latency.
1350 */
1351 scsi_adjust_queue_depth(sdev,
1352 /*NON-TAGGED*/0,
1353 /*queue depth*/2);
1354 break;
1355 }
1356 }
1357
1358 int
1359 ahd_platform_abort_scbs(struct ahd_softc *ahd, int target, char channel,
1360 int lun, u_int tag, role_t role, uint32_t status)
1361 {
1362 return 0;
1363 }
1364
1365 static u_int
1366 ahd_linux_user_tagdepth(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
1367 {
1368 static int warned_user;
1369 u_int tags;
1370
1371 tags = 0;
1372 if ((ahd->user_discenable & devinfo->target_mask) != 0) {
1373 if (ahd->unit >= NUM_ELEMENTS(aic79xx_tag_info)) {
1374
1375 if (warned_user == 0) {
1376 printf(KERN_WARNING
1377 "aic79xx: WARNING: Insufficient tag_info instances\n"
1378 "aic79xx: for installed controllers. Using defaults\n"
1379 "aic79xx: Please update the aic79xx_tag_info array in\n"
1380 "aic79xx: the aic79xx_osm.c source file.\n");
1381 warned_user++;
1382 }
1383 tags = AHD_MAX_QUEUE;
1384 } else {
1385 adapter_tag_info_t *tag_info;
1386
1387 tag_info = &aic79xx_tag_info[ahd->unit];
1388 tags = tag_info->tag_commands[devinfo->target_offset];
1389 if (tags > AHD_MAX_QUEUE)
1390 tags = AHD_MAX_QUEUE;
1391 }
1392 }
1393 return (tags);
1394 }
1395
1396 /*
1397 * Determines the queue depth for a given device.
1398 */
1399 static void
1400 ahd_linux_device_queue_depth(struct scsi_device *sdev)
1401 {
1402 struct ahd_devinfo devinfo;
1403 u_int tags;
1404 struct ahd_softc *ahd = *((struct ahd_softc **)sdev->host->hostdata);
1405
1406 ahd_compile_devinfo(&devinfo,
1407 ahd->our_id,
1408 sdev->sdev_target->id, sdev->lun,
1409 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1410 ROLE_INITIATOR);
1411 tags = ahd_linux_user_tagdepth(ahd, &devinfo);
1412 if (tags != 0 && sdev->tagged_supported != 0) {
1413
1414 ahd_set_tags(ahd, &devinfo, AHD_QUEUE_TAGGED);
1415 ahd_print_devinfo(ahd, &devinfo);
1416 printf("Tagged Queuing enabled. Depth %d\n", tags);
1417 } else {
1418 ahd_set_tags(ahd, &devinfo, AHD_QUEUE_NONE);
1419 }
1420 }
1421
1422 static int
1423 ahd_linux_run_command(struct ahd_softc *ahd, struct ahd_linux_device *dev,
1424 struct scsi_cmnd *cmd)
1425 {
1426 struct scb *scb;
1427 struct hardware_scb *hscb;
1428 struct ahd_initiator_tinfo *tinfo;
1429 struct ahd_tmode_tstate *tstate;
1430 u_int col_idx;
1431 uint16_t mask;
1432
1433 /*
1434 * Get an scb to use.
1435 */
1436 tinfo = ahd_fetch_transinfo(ahd, 'A', ahd->our_id,
1437 cmd->device->id, &tstate);
1438 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) == 0
1439 || (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
1440 col_idx = AHD_NEVER_COL_IDX;
1441 } else {
1442 col_idx = AHD_BUILD_COL_IDX(cmd->device->id,
1443 cmd->device->lun);
1444 }
1445 if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
1446 ahd->flags |= AHD_RESOURCE_SHORTAGE;
1447 return SCSI_MLQUEUE_HOST_BUSY;
1448 }
1449
1450 scb->io_ctx = cmd;
1451 scb->platform_data->dev = dev;
1452 hscb = scb->hscb;
1453 cmd->host_scribble = (char *)scb;
1454
1455 /*
1456 * Fill out basics of the HSCB.
1457 */
1458 hscb->control = 0;
1459 hscb->scsiid = BUILD_SCSIID(ahd, cmd);
1460 hscb->lun = cmd->device->lun;
1461 scb->hscb->task_management = 0;
1462 mask = SCB_GET_TARGET_MASK(ahd, scb);
1463
1464 if ((ahd->user_discenable & mask) != 0)
1465 hscb->control |= DISCENB;
1466
1467 if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0)
1468 scb->flags |= SCB_PACKETIZED;
1469
1470 if ((tstate->auto_negotiate & mask) != 0) {
1471 scb->flags |= SCB_AUTO_NEGOTIATE;
1472 scb->hscb->control |= MK_MESSAGE;
1473 }
1474
1475 if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
1476 int msg_bytes;
1477 uint8_t tag_msgs[2];
1478
1479 msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
1480 if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
1481 hscb->control |= tag_msgs[0];
1482 if (tag_msgs[0] == MSG_ORDERED_TASK)
1483 dev->commands_since_idle_or_otag = 0;
1484 } else
1485 if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
1486 && (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
1487 hscb->control |= MSG_ORDERED_TASK;
1488 dev->commands_since_idle_or_otag = 0;
1489 } else {
1490 hscb->control |= MSG_SIMPLE_TASK;
1491 }
1492 }
1493
1494 hscb->cdb_len = cmd->cmd_len;
1495 memcpy(hscb->shared_data.idata.cdb, cmd->cmnd, hscb->cdb_len);
1496
1497 scb->platform_data->xfer_len = 0;
1498 ahd_set_residual(scb, 0);
1499 ahd_set_sense_residual(scb, 0);
1500 scb->sg_count = 0;
1501 if (cmd->use_sg != 0) {
1502 void *sg;
1503 struct scatterlist *cur_seg;
1504 u_int nseg;
1505 int dir;
1506
1507 cur_seg = (struct scatterlist *)cmd->request_buffer;
1508 dir = cmd->sc_data_direction;
1509 nseg = pci_map_sg(ahd->dev_softc, cur_seg,
1510 cmd->use_sg, dir);
1511 scb->platform_data->xfer_len = 0;
1512 for (sg = scb->sg_list; nseg > 0; nseg--, cur_seg++) {
1513 dma_addr_t addr;
1514 bus_size_t len;
1515
1516 addr = sg_dma_address(cur_seg);
1517 len = sg_dma_len(cur_seg);
1518 scb->platform_data->xfer_len += len;
1519 sg = ahd_sg_setup(ahd, scb, sg, addr, len,
1520 /*last*/nseg == 1);
1521 }
1522 } else if (cmd->request_bufflen != 0) {
1523 void *sg;
1524 dma_addr_t addr;
1525 int dir;
1526
1527 sg = scb->sg_list;
1528 dir = cmd->sc_data_direction;
1529 addr = pci_map_single(ahd->dev_softc,
1530 cmd->request_buffer,
1531 cmd->request_bufflen, dir);
1532 scb->platform_data->xfer_len = cmd->request_bufflen;
1533 scb->platform_data->buf_busaddr = addr;
1534 sg = ahd_sg_setup(ahd, scb, sg, addr,
1535 cmd->request_bufflen, /*last*/TRUE);
1536 }
1537
1538 LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
1539 dev->openings--;
1540 dev->active++;
1541 dev->commands_issued++;
1542
1543 if ((dev->flags & AHD_DEV_PERIODIC_OTAG) != 0)
1544 dev->commands_since_idle_or_otag++;
1545 scb->flags |= SCB_ACTIVE;
1546 ahd_queue_scb(ahd, scb);
1547
1548 return 0;
1549 }
1550
1551 /*
1552 * SCSI controller interrupt handler.
1553 */
1554 irqreturn_t
1555 ahd_linux_isr(int irq, void *dev_id, struct pt_regs * regs)
1556 {
1557 struct ahd_softc *ahd;
1558 u_long flags;
1559 int ours;
1560
1561 ahd = (struct ahd_softc *) dev_id;
1562 ahd_lock(ahd, &flags);
1563 ours = ahd_intr(ahd);
1564 ahd_unlock(ahd, &flags);
1565 return IRQ_RETVAL(ours);
1566 }
1567
1568 void
1569 ahd_platform_flushwork(struct ahd_softc *ahd)
1570 {
1571
1572 }
1573
1574 void
1575 ahd_send_async(struct ahd_softc *ahd, char channel,
1576 u_int target, u_int lun, ac_code code, void *arg)
1577 {
1578 switch (code) {
1579 case AC_TRANSFER_NEG:
1580 {
1581 char buf[80];
1582 struct scsi_target *starget;
1583 struct ahd_linux_target *targ;
1584 struct info_str info;
1585 struct ahd_initiator_tinfo *tinfo;
1586 struct ahd_tmode_tstate *tstate;
1587 unsigned int target_ppr_options;
1588
1589 BUG_ON(target == CAM_TARGET_WILDCARD);
1590
1591 info.buffer = buf;
1592 info.length = sizeof(buf);
1593 info.offset = 0;
1594 info.pos = 0;
1595 tinfo = ahd_fetch_transinfo(ahd, channel, ahd->our_id,
1596 target, &tstate);
1597
1598 /*
1599 * Don't bother reporting results while
1600 * negotiations are still pending.
1601 */
1602 if (tinfo->curr.period != tinfo->goal.period
1603 || tinfo->curr.width != tinfo->goal.width
1604 || tinfo->curr.offset != tinfo->goal.offset
1605 || tinfo->curr.ppr_options != tinfo->goal.ppr_options)
1606 if (bootverbose == 0)
1607 break;
1608
1609 /*
1610 * Don't bother reporting results that
1611 * are identical to those last reported.
1612 */
1613 starget = ahd->platform_data->starget[target];
1614 if (starget == NULL)
1615 break;
1616 targ = scsi_transport_target_data(starget);
1617
1618 target_ppr_options =
1619 (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0)
1620 + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0)
1621 + (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0)
1622 + (spi_rd_strm(starget) ? MSG_EXT_PPR_RD_STRM : 0)
1623 + (spi_pcomp_en(starget) ? MSG_EXT_PPR_PCOMP_EN : 0)
1624 + (spi_rti(starget) ? MSG_EXT_PPR_RTI : 0)
1625 + (spi_wr_flow(starget) ? MSG_EXT_PPR_WR_FLOW : 0)
1626 + (spi_hold_mcs(starget) ? MSG_EXT_PPR_HOLD_MCS : 0);
1627
1628 if (tinfo->curr.period == spi_period(starget)
1629 && tinfo->curr.width == spi_width(starget)
1630 && tinfo->curr.offset == spi_offset(starget)
1631 && tinfo->curr.ppr_options == target_ppr_options)
1632 if (bootverbose == 0)
1633 break;
1634
1635 spi_period(starget) = tinfo->curr.period;
1636 spi_width(starget) = tinfo->curr.width;
1637 spi_offset(starget) = tinfo->curr.offset;
1638 spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0;
1639 spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0;
1640 spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0;
1641 spi_rd_strm(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RD_STRM ? 1 : 0;
1642 spi_pcomp_en(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_PCOMP_EN ? 1 : 0;
1643 spi_rti(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_RTI ? 1 : 0;
1644 spi_wr_flow(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_WR_FLOW ? 1 : 0;
1645 spi_hold_mcs(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_HOLD_MCS ? 1 : 0;
1646 spi_display_xfer_agreement(starget);
1647 break;
1648 }
1649 case AC_SENT_BDR:
1650 {
1651 WARN_ON(lun != CAM_LUN_WILDCARD);
1652 scsi_report_device_reset(ahd->platform_data->host,
1653 channel - 'A', target);
1654 break;
1655 }
1656 case AC_BUS_RESET:
1657 if (ahd->platform_data->host != NULL) {
1658 scsi_report_bus_reset(ahd->platform_data->host,
1659 channel - 'A');
1660 }
1661 break;
1662 default:
1663 panic("ahd_send_async: Unexpected async event");
1664 }
1665 }
1666
1667 /*
1668 * Calls the higher level scsi done function and frees the scb.
1669 */
1670 void
1671 ahd_done(struct ahd_softc *ahd, struct scb *scb)
1672 {
1673 struct scsi_cmnd *cmd;
1674 struct ahd_linux_device *dev;
1675
1676 if ((scb->flags & SCB_ACTIVE) == 0) {
1677 printf("SCB %d done'd twice\n", SCB_GET_TAG(scb));
1678 ahd_dump_card_state(ahd);
1679 panic("Stopping for safety");
1680 }
1681 LIST_REMOVE(scb, pending_links);
1682 cmd = scb->io_ctx;
1683 dev = scb->platform_data->dev;
1684 dev->active--;
1685 dev->openings++;
1686 if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) {
1687 cmd->result &= ~(CAM_DEV_QFRZN << 16);
1688 dev->qfrozen--;
1689 }
1690 ahd_linux_unmap_scb(ahd, scb);
1691
1692 /*
1693 * Guard against stale sense data.
1694 * The Linux mid-layer assumes that sense
1695 * was retrieved anytime the first byte of
1696 * the sense buffer looks "sane".
1697 */
1698 cmd->sense_buffer[0] = 0;
1699 if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
1700 uint32_t amount_xferred;
1701
1702 amount_xferred =
1703 ahd_get_transfer_length(scb) - ahd_get_residual(scb);
1704 if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) {
1705 #ifdef AHD_DEBUG
1706 if ((ahd_debug & AHD_SHOW_MISC) != 0) {
1707 ahd_print_path(ahd, scb);
1708 printf("Set CAM_UNCOR_PARITY\n");
1709 }
1710 #endif
1711 ahd_set_transaction_status(scb, CAM_UNCOR_PARITY);
1712 #ifdef AHD_REPORT_UNDERFLOWS
1713 /*
1714 * This code is disabled by default as some
1715 * clients of the SCSI system do not properly
1716 * initialize the underflow parameter. This
1717 * results in spurious termination of commands
1718 * that complete as expected (e.g. underflow is
1719 * allowed as command can return variable amounts
1720 * of data.
1721 */
1722 } else if (amount_xferred < scb->io_ctx->underflow) {
1723 u_int i;
1724
1725 ahd_print_path(ahd, scb);
1726 printf("CDB:");
1727 for (i = 0; i < scb->io_ctx->cmd_len; i++)
1728 printf(" 0x%x", scb->io_ctx->cmnd[i]);
1729 printf("\n");
1730 ahd_print_path(ahd, scb);
1731 printf("Saw underflow (%ld of %ld bytes). "
1732 "Treated as error\n",
1733 ahd_get_residual(scb),
1734 ahd_get_transfer_length(scb));
1735 ahd_set_transaction_status(scb, CAM_DATA_RUN_ERR);
1736 #endif
1737 } else {
1738 ahd_set_transaction_status(scb, CAM_REQ_CMP);
1739 }
1740 } else if (ahd_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) {
1741 ahd_linux_handle_scsi_status(ahd, cmd->device, scb);
1742 }
1743
1744 if (dev->openings == 1
1745 && ahd_get_transaction_status(scb) == CAM_REQ_CMP
1746 && ahd_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
1747 dev->tag_success_count++;
1748 /*
1749 * Some devices deal with temporary internal resource
1750 * shortages by returning queue full. When the queue
1751 * full occurrs, we throttle back. Slowly try to get
1752 * back to our previous queue depth.
1753 */
1754 if ((dev->openings + dev->active) < dev->maxtags
1755 && dev->tag_success_count > AHD_TAG_SUCCESS_INTERVAL) {
1756 dev->tag_success_count = 0;
1757 dev->openings++;
1758 }
1759
1760 if (dev->active == 0)
1761 dev->commands_since_idle_or_otag = 0;
1762
1763 if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
1764 printf("Recovery SCB completes\n");
1765 if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
1766 || ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
1767 ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
1768 if ((ahd->platform_data->flags & AHD_SCB_UP_EH_SEM) != 0) {
1769 ahd->platform_data->flags &= ~AHD_SCB_UP_EH_SEM;
1770 up(&ahd->platform_data->eh_sem);
1771 }
1772 }
1773
1774 ahd_free_scb(ahd, scb);
1775 ahd_linux_queue_cmd_complete(ahd, cmd);
1776 }
1777
1778 static void
1779 ahd_linux_handle_scsi_status(struct ahd_softc *ahd,
1780 struct scsi_device *sdev, struct scb *scb)
1781 {
1782 struct ahd_devinfo devinfo;
1783 struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
1784
1785 ahd_compile_devinfo(&devinfo,
1786 ahd->our_id,
1787 sdev->sdev_target->id, sdev->lun,
1788 sdev->sdev_target->channel == 0 ? 'A' : 'B',
1789 ROLE_INITIATOR);
1790
1791 /*
1792 * We don't currently trust the mid-layer to
1793 * properly deal with queue full or busy. So,
1794 * when one occurs, we tell the mid-layer to
1795 * unconditionally requeue the command to us
1796 * so that we can retry it ourselves. We also
1797 * implement our own throttling mechanism so
1798 * we don't clobber the device with too many
1799 * commands.
1800 */
1801 switch (ahd_get_scsi_status(scb)) {
1802 default:
1803 break;
1804 case SCSI_STATUS_CHECK_COND:
1805 case SCSI_STATUS_CMD_TERMINATED:
1806 {
1807 struct scsi_cmnd *cmd;
1808
1809 /*
1810 * Copy sense information to the OS's cmd
1811 * structure if it is available.
1812 */
1813 cmd = scb->io_ctx;
1814 if ((scb->flags & (SCB_SENSE|SCB_PKT_SENSE)) != 0) {
1815 struct scsi_status_iu_header *siu;
1816 u_int sense_size;
1817 u_int sense_offset;
1818
1819 if (scb->flags & SCB_SENSE) {
1820 sense_size = MIN(sizeof(struct scsi_sense_data)
1821 - ahd_get_sense_residual(scb),
1822 sizeof(cmd->sense_buffer));
1823 sense_offset = 0;
1824 } else {
1825 /*
1826 * Copy only the sense data into the provided
1827 * buffer.
1828 */
1829 siu = (struct scsi_status_iu_header *)
1830 scb->sense_data;
1831 sense_size = MIN(scsi_4btoul(siu->sense_length),
1832 sizeof(cmd->sense_buffer));
1833 sense_offset = SIU_SENSE_OFFSET(siu);
1834 }
1835
1836 memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
1837 memcpy(cmd->sense_buffer,
1838 ahd_get_sense_buf(ahd, scb)
1839 + sense_offset, sense_size);
1840 cmd->result |= (DRIVER_SENSE << 24);
1841
1842 #ifdef AHD_DEBUG
1843 if (ahd_debug & AHD_SHOW_SENSE) {
1844 int i;
1845
1846 printf("Copied %d bytes of sense data at %d:",
1847 sense_size, sense_offset);
1848 for (i = 0; i < sense_size; i++) {
1849 if ((i & 0xF) == 0)
1850 printf("\n");
1851 printf("0x%x ", cmd->sense_buffer[i]);
1852 }
1853 printf("\n");
1854 }
1855 #endif
1856 }
1857 break;
1858 }
1859 case SCSI_STATUS_QUEUE_FULL:
1860 /*
1861 * By the time the core driver has returned this
1862 * command, all other commands that were queued
1863 * to us but not the device have been returned.
1864 * This ensures that dev->active is equal to
1865 * the number of commands actually queued to
1866 * the device.
1867 */
1868 dev->tag_success_count = 0;
1869 if (dev->active != 0) {
1870 /*
1871 * Drop our opening count to the number
1872 * of commands currently outstanding.
1873 */
1874 dev->openings = 0;
1875 #ifdef AHD_DEBUG
1876 if ((ahd_debug & AHD_SHOW_QFULL) != 0) {
1877 ahd_print_path(ahd, scb);
1878 printf("Dropping tag count to %d\n",
1879 dev->active);
1880 }
1881 #endif
1882 if (dev->active == dev->tags_on_last_queuefull) {
1883
1884 dev->last_queuefull_same_count++;
1885 /*
1886 * If we repeatedly see a queue full
1887 * at the same queue depth, this
1888 * device has a fixed number of tag
1889 * slots. Lock in this tag depth
1890 * so we stop seeing queue fulls from
1891 * this device.
1892 */
1893 if (dev->last_queuefull_same_count
1894 == AHD_LOCK_TAGS_COUNT) {
1895 dev->maxtags = dev->active;
1896 ahd_print_path(ahd, scb);
1897 printf("Locking max tag count at %d\n",
1898 dev->active);
1899 }
1900 } else {
1901 dev->tags_on_last_queuefull = dev->active;
1902 dev->last_queuefull_same_count = 0;
1903 }
1904 ahd_set_transaction_status(scb, CAM_REQUEUE_REQ);
1905 ahd_set_scsi_status(scb, SCSI_STATUS_OK);
1906 ahd_platform_set_tags(ahd, &devinfo,
1907 (dev->flags & AHD_DEV_Q_BASIC)
1908 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
1909 break;
1910 }
1911 /*
1912 * Drop down to a single opening, and treat this
1913 * as if the target returned BUSY SCSI status.
1914 */
1915 dev->openings = 1;
1916 ahd_platform_set_tags(ahd, &devinfo,
1917 (dev->flags & AHD_DEV_Q_BASIC)
1918 ? AHD_QUEUE_BASIC : AHD_QUEUE_TAGGED);
1919 ahd_set_scsi_status(scb, SCSI_STATUS_BUSY);
1920 }
1921 }
1922
1923 static void
1924 ahd_linux_queue_cmd_complete(struct ahd_softc *ahd, struct scsi_cmnd *cmd)
1925 {
1926 /*
1927 * Map CAM error codes into Linux Error codes. We
1928 * avoid the conversion so that the DV code has the
1929 * full error information available when making
1930 * state change decisions.
1931 */
1932 {
1933 uint32_t status;
1934 u_int new_status;
1935
1936 status = ahd_cmd_get_transaction_status(cmd);
1937 switch (status) {
1938 case CAM_REQ_INPROG:
1939 case CAM_REQ_CMP:
1940 case CAM_SCSI_STATUS_ERROR:
1941 new_status = DID_OK;
1942 break;
1943 case CAM_REQ_ABORTED:
1944 new_status = DID_ABORT;
1945 break;
1946 case CAM_BUSY:
1947 new_status = DID_BUS_BUSY;
1948 break;
1949 case CAM_REQ_INVALID:
1950 case CAM_PATH_INVALID:
1951 new_status = DID_BAD_TARGET;
1952 break;
1953 case CAM_SEL_TIMEOUT:
1954 new_status = DID_NO_CONNECT;
1955 break;
1956 case CAM_SCSI_BUS_RESET:
1957 case CAM_BDR_SENT:
1958 new_status = DID_RESET;
1959 break;
1960 case CAM_UNCOR_PARITY:
1961 new_status = DID_PARITY;
1962 break;
1963 case CAM_CMD_TIMEOUT:
1964 new_status = DID_TIME_OUT;
1965 break;
1966 case CAM_UA_ABORT:
1967 case CAM_REQ_CMP_ERR:
1968 case CAM_AUTOSENSE_FAIL:
1969 case CAM_NO_HBA:
1970 case CAM_DATA_RUN_ERR:
1971 case CAM_UNEXP_BUSFREE:
1972 case CAM_SEQUENCE_FAIL:
1973 case CAM_CCB_LEN_ERR:
1974 case CAM_PROVIDE_FAIL:
1975 case CAM_REQ_TERMIO:
1976 case CAM_UNREC_HBA_ERROR:
1977 case CAM_REQ_TOO_BIG:
1978 new_status = DID_ERROR;
1979 break;
1980 case CAM_REQUEUE_REQ:
1981 new_status = DID_REQUEUE;
1982 break;
1983 default:
1984 /* We should never get here */
1985 new_status = DID_ERROR;
1986 break;
1987 }
1988
1989 ahd_cmd_set_transaction_status(cmd, new_status);
1990 }
1991
1992 cmd->scsi_done(cmd);
1993 }
1994
1995 static void
1996 ahd_linux_sem_timeout(u_long arg)
1997 {
1998 struct ahd_softc *ahd;
1999 u_long s;
2000
2001 ahd = (struct ahd_softc *)arg;
2002
2003 ahd_lock(ahd, &s);
2004 if ((ahd->platform_data->flags & AHD_SCB_UP_EH_SEM) != 0) {
2005 ahd->platform_data->flags &= ~AHD_SCB_UP_EH_SEM;
2006 up(&ahd->platform_data->eh_sem);
2007 }
2008 ahd_unlock(ahd, &s);
2009 }
2010
2011 void
2012 ahd_freeze_simq(struct ahd_softc *ahd)
2013 {
2014 ahd->platform_data->qfrozen++;
2015 if (ahd->platform_data->qfrozen == 1) {
2016 scsi_block_requests(ahd->platform_data->host);
2017 ahd_platform_abort_scbs(ahd, CAM_TARGET_WILDCARD, ALL_CHANNELS,
2018 CAM_LUN_WILDCARD, SCB_LIST_NULL,
2019 ROLE_INITIATOR, CAM_REQUEUE_REQ);
2020 }
2021 }
2022
2023 void
2024 ahd_release_simq(struct ahd_softc *ahd)
2025 {
2026 u_long s;
2027 int unblock_reqs;
2028
2029 unblock_reqs = 0;
2030 ahd_lock(ahd, &s);
2031 if (ahd->platform_data->qfrozen > 0)
2032 ahd->platform_data->qfrozen--;
2033 if (ahd->platform_data->qfrozen == 0) {
2034 unblock_reqs = 1;
2035 }
2036 ahd_unlock(ahd, &s);
2037 /*
2038 * There is still a race here. The mid-layer
2039 * should keep its own freeze count and use
2040 * a bottom half handler to run the queues
2041 * so we can unblock with our own lock held.
2042 */
2043 if (unblock_reqs)
2044 scsi_unblock_requests(ahd->platform_data->host);
2045 }
2046
2047 static int
2048 ahd_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag)
2049 {
2050 struct ahd_softc *ahd;
2051 struct ahd_linux_device *dev;
2052 struct scb *pending_scb;
2053 u_int saved_scbptr;
2054 u_int active_scbptr;
2055 u_int last_phase;
2056 u_int saved_scsiid;
2057 u_int cdb_byte;
2058 int retval;
2059 int was_paused;
2060 int paused;
2061 int wait;
2062 int disconnected;
2063 ahd_mode_state saved_modes;
2064
2065 pending_scb = NULL;
2066 paused = FALSE;
2067 wait = FALSE;
2068 ahd = *(struct ahd_softc **)cmd->device->host->hostdata;
2069
2070 printf("%s:%d:%d:%d: Attempting to queue a%s message:",
2071 ahd_name(ahd), cmd->device->channel,
2072 cmd->device->id, cmd->device->lun,
2073 flag == SCB_ABORT ? "n ABORT" : " TARGET RESET");
2074
2075 printf("CDB:");
2076 for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++)
2077 printf(" 0x%x", cmd->cmnd[cdb_byte]);
2078 printf("\n");
2079
2080 spin_lock_irq(&ahd->platform_data->spin_lock);
2081
2082 /*
2083 * First determine if we currently own this command.
2084 * Start by searching the device queue. If not found
2085 * there, check the pending_scb list. If not found
2086 * at all, and the system wanted us to just abort the
2087 * command, return success.
2088 */
2089 dev = scsi_transport_device_data(cmd->device);
2090
2091 if (dev == NULL) {
2092 /*
2093 * No target device for this command exists,
2094 * so we must not still own the command.
2095 */
2096 printf("%s:%d:%d:%d: Is not an active device\n",
2097 ahd_name(ahd), cmd->device->channel, cmd->device->id,
2098 cmd->device->lun);
2099 retval = SUCCESS;
2100 goto no_cmd;
2101 }
2102
2103 /*
2104 * See if we can find a matching cmd in the pending list.
2105 */
2106 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2107 if (pending_scb->io_ctx == cmd)
2108 break;
2109 }
2110
2111 if (pending_scb == NULL && flag == SCB_DEVICE_RESET) {
2112
2113 /* Any SCB for this device will do for a target reset */
2114 LIST_FOREACH(pending_scb, &ahd->pending_scbs, pending_links) {
2115 if (ahd_match_scb(ahd, pending_scb, cmd->device->id,
2116 cmd->device->channel + 'A',
2117 CAM_LUN_WILDCARD,
2118 SCB_LIST_NULL, ROLE_INITIATOR) == 0)
2119 break;
2120 }
2121 }
2122
2123 if (pending_scb == NULL) {
2124 printf("%s:%d:%d:%d: Command not found\n",
2125 ahd_name(ahd), cmd->device->channel, cmd->device->id,
2126 cmd->device->lun);
2127 goto no_cmd;
2128 }
2129
2130 if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
2131 /*
2132 * We can't queue two recovery actions using the same SCB
2133 */
2134 retval = FAILED;
2135 goto done;
2136 }
2137
2138 /*
2139 * Ensure that the card doesn't do anything
2140 * behind our back. Also make sure that we
2141 * didn't "just" miss an interrupt that would
2142 * affect this cmd.
2143 */
2144 was_paused = ahd_is_paused(ahd);
2145 ahd_pause_and_flushwork(ahd);
2146 paused = TRUE;
2147
2148 if ((pending_scb->flags & SCB_ACTIVE) == 0) {
2149 printf("%s:%d:%d:%d: Command already completed\n",
2150 ahd_name(ahd), cmd->device->channel, cmd->device->id,
2151 cmd->device->lun);
2152 goto no_cmd;
2153 }
2154
2155 printf("%s: At time of recovery, card was %spaused\n",
2156 ahd_name(ahd), was_paused ? "" : "not ");
2157 ahd_dump_card_state(ahd);
2158
2159 disconnected = TRUE;
2160 if (flag == SCB_ABORT) {
2161 if (ahd_search_qinfifo(ahd, cmd->device->id,
2162 cmd->device->channel + 'A',
2163 cmd->device->lun,
2164 pending_scb->hscb->tag,
2165 ROLE_INITIATOR, CAM_REQ_ABORTED,
2166 SEARCH_COMPLETE) > 0) {
2167 printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
2168 ahd_name(ahd), cmd->device->channel,
2169 cmd->device->id, cmd->device->lun);
2170 retval = SUCCESS;
2171 goto done;
2172 }
2173 } else if (ahd_search_qinfifo(ahd, cmd->device->id,
2174 cmd->device->channel + 'A',
2175 cmd->device->lun, pending_scb->hscb->tag,
2176 ROLE_INITIATOR, /*status*/0,
2177 SEARCH_COUNT) > 0) {
2178 disconnected = FALSE;
2179 }
2180
2181 saved_modes = ahd_save_modes(ahd);
2182 ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
2183 last_phase = ahd_inb(ahd, LASTPHASE);
2184 saved_scbptr = ahd_get_scbptr(ahd);
2185 active_scbptr = saved_scbptr;
2186 if (disconnected && (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) {
2187 struct scb *bus_scb;
2188
2189 bus_scb = ahd_lookup_scb(ahd, active_scbptr);
2190 if (bus_scb == pending_scb)
2191 disconnected = FALSE;
2192 else if (flag != SCB_ABORT
2193 && ahd_inb(ahd, SAVED_SCSIID) == pending_scb->hscb->scsiid
2194 && ahd_inb(ahd, SAVED_LUN) == SCB_GET_LUN(pending_scb))
2195 disconnected = FALSE;
2196 }
2197
2198 /*
2199 * At this point, pending_scb is the scb associated with the
2200 * passed in command. That command is currently active on the
2201 * bus or is in the disconnected state.
2202 */
2203 saved_scsiid = ahd_inb(ahd, SAVED_SCSIID);
2204 if (last_phase != P_BUSFREE
2205 && (SCB_GET_TAG(pending_scb) == active_scbptr
2206 || (flag == SCB_DEVICE_RESET
2207 && SCSIID_TARGET(ahd, saved_scsiid) == cmd->device->id))) {
2208
2209 /*
2210 * We're active on the bus, so assert ATN
2211 * and hope that the target responds.
2212 */
2213 pending_scb = ahd_lookup_scb(ahd, active_scbptr);
2214 pending_scb->flags |= SCB_RECOVERY_SCB|flag;
2215 ahd_outb(ahd, MSG_OUT, HOST_MSG);
2216 ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
2217 printf("%s:%d:%d:%d: Device is active, asserting ATN\n",
2218 ahd_name(ahd), cmd->device->channel,
2219 cmd->device->id, cmd->device->lun);
2220 wait = TRUE;
2221 } else if (disconnected) {
2222
2223 /*
2224 * Actually re-queue this SCB in an attempt
2225 * to select the device before it reconnects.
2226 */
2227 pending_scb->flags |= SCB_RECOVERY_SCB|SCB_ABORT;
2228 ahd_set_scbptr(ahd, SCB_GET_TAG(pending_scb));
2229 pending_scb->hscb->cdb_len = 0;
2230 pending_scb->hscb->task_attribute = 0;
2231 pending_scb->hscb->task_management = SIU_TASKMGMT_ABORT_TASK;
2232
2233 if ((pending_scb->flags & SCB_PACKETIZED) != 0) {
2234 /*
2235 * Mark the SCB has having an outstanding
2236 * task management function. Should the command
2237 * complete normally before the task management
2238 * function can be sent, the host will be notified
2239 * to abort our requeued SCB.
2240 */
2241 ahd_outb(ahd, SCB_TASK_MANAGEMENT,
2242 pending_scb->hscb->task_management);
2243 } else {
2244 /*
2245 * If non-packetized, set the MK_MESSAGE control
2246 * bit indicating that we desire to send a message.
2247 * We also set the disconnected flag since there is
2248 * no guarantee that our SCB control byte matches
2249 * the version on the card. We don't want the
2250 * sequencer to abort the command thinking an
2251 * unsolicited reselection occurred.
2252 */
2253 pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
2254
2255 /*
2256 * The sequencer will never re-reference the
2257 * in-core SCB. To make sure we are notified
2258 * during reslection, set the MK_MESSAGE flag in
2259 * the card's copy of the SCB.
2260 */
2261 ahd_outb(ahd, SCB_CONTROL,
2262 ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
2263 }
2264
2265 /*
2266 * Clear out any entries in the QINFIFO first
2267 * so we are the next SCB for this target
2268 * to run.
2269 */
2270 ahd_search_qinfifo(ahd, cmd->device->id,
2271 cmd->device->channel + 'A', cmd->device->lun,
2272 SCB_LIST_NULL, ROLE_INITIATOR,
2273 CAM_REQUEUE_REQ, SEARCH_COMPLETE);
2274 ahd_qinfifo_requeue_tail(ahd, pending_scb);
2275 ahd_set_scbptr(ahd, saved_scbptr);
2276 ahd_print_path(ahd, pending_scb);
2277 printf("Device is disconnected, re-queuing SCB\n");
2278 wait = TRUE;
2279 } else {
2280 printf("%s:%d:%d:%d: Unable to deliver message\n",
2281 ahd_name(ahd), cmd->device->channel,
2282 cmd->device->id, cmd->device->lun);
2283 retval = FAILED;
2284 goto done;
2285 }
2286
2287 no_cmd:
2288 /*
2289 * Our assumption is that if we don't have the command, no
2290 * recovery action was required, so we return success. Again,
2291 * the semantics of the mid-layer recovery engine are not
2292 * well defined, so this may change in time.
2293 */
2294 retval = SUCCESS;
2295 done:
2296 if (paused)
2297 ahd_unpause(ahd);
2298 if (wait) {
2299 struct timer_list timer;
2300 int ret;
2301
2302 ahd->platform_data->flags |= AHD_SCB_UP_EH_SEM;
2303 spin_unlock_irq(&ahd->platform_data->spin_lock);
2304 init_timer(&timer);
2305 timer.data = (u_long)ahd;
2306 timer.expires = jiffies + (5 * HZ);
2307 timer.function = ahd_linux_sem_timeout;
2308 add_timer(&timer);
2309 printf("Recovery code sleeping\n");
2310 down(&ahd->platform_data->eh_sem);
2311 printf("Recovery code awake\n");
2312 ret = del_timer_sync(&timer);
2313 if (ret == 0) {
2314 printf("Timer Expired\n");
2315 retval = FAILED;
2316 }
2317 spin_lock_irq(&ahd->platform_data->spin_lock);
2318 }
2319 spin_unlock_irq(&ahd->platform_data->spin_lock);
2320 return (retval);
2321 }
2322
2323 static void ahd_linux_set_width(struct scsi_target *starget, int width)
2324 {
2325 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2326 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2327 struct ahd_devinfo devinfo;
2328 unsigned long flags;
2329
2330 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2331 starget->channel + 'A', ROLE_INITIATOR);
2332 ahd_lock(ahd, &flags);
2333 ahd_set_width(ahd, &devinfo, width, AHD_TRANS_GOAL, FALSE);
2334 ahd_unlock(ahd, &flags);
2335 }
2336
2337 static void ahd_linux_set_period(struct scsi_target *starget, int period)
2338 {
2339 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2340 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2341 struct ahd_tmode_tstate *tstate;
2342 struct ahd_initiator_tinfo *tinfo
2343 = ahd_fetch_transinfo(ahd,
2344 starget->channel + 'A',
2345 shost->this_id, starget->id, &tstate);
2346 struct ahd_devinfo devinfo;
2347 unsigned int ppr_options = tinfo->goal.ppr_options;
2348 unsigned int dt;
2349 unsigned long flags;
2350 unsigned long offset = tinfo->goal.offset;
2351
2352 #ifdef AHD_DEBUG
2353 if ((ahd_debug & AHD_SHOW_DV) != 0)
2354 printf("%s: set period to %d\n", ahd_name(ahd), period);
2355 #endif
2356 if (offset == 0)
2357 offset = MAX_OFFSET;
2358
2359 if (period < 8)
2360 period = 8;
2361 if (period < 10) {
2362 ppr_options |= MSG_EXT_PPR_DT_REQ;
2363 if (period == 8)
2364 ppr_options |= MSG_EXT_PPR_IU_REQ;
2365 }
2366
2367 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2368
2369 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2370 starget->channel + 'A', ROLE_INITIATOR);
2371
2372 /* all PPR requests apart from QAS require wide transfers */
2373 if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) {
2374 if (spi_width(starget) == 0)
2375 ppr_options &= MSG_EXT_PPR_QAS_REQ;
2376 }
2377
2378 ahd_find_syncrate(ahd, &period, &ppr_options,
2379 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2380
2381 ahd_lock(ahd, &flags);
2382 ahd_set_syncrate(ahd, &devinfo, period, offset,
2383 ppr_options, AHD_TRANS_GOAL, FALSE);
2384 ahd_unlock(ahd, &flags);
2385 }
2386
2387 static void ahd_linux_set_offset(struct scsi_target *starget, int offset)
2388 {
2389 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2390 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2391 struct ahd_tmode_tstate *tstate;
2392 struct ahd_initiator_tinfo *tinfo
2393 = ahd_fetch_transinfo(ahd,
2394 starget->channel + 'A',
2395 shost->this_id, starget->id, &tstate);
2396 struct ahd_devinfo devinfo;
2397 unsigned int ppr_options = 0;
2398 unsigned int period = 0;
2399 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2400 unsigned long flags;
2401
2402 #ifdef AHD_DEBUG
2403 if ((ahd_debug & AHD_SHOW_DV) != 0)
2404 printf("%s: set offset to %d\n", ahd_name(ahd), offset);
2405 #endif
2406
2407 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2408 starget->channel + 'A', ROLE_INITIATOR);
2409 if (offset != 0) {
2410 period = tinfo->goal.period;
2411 ppr_options = tinfo->goal.ppr_options;
2412 ahd_find_syncrate(ahd, &period, &ppr_options,
2413 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2414 }
2415
2416 ahd_lock(ahd, &flags);
2417 ahd_set_syncrate(ahd, &devinfo, period, offset, ppr_options,
2418 AHD_TRANS_GOAL, FALSE);
2419 ahd_unlock(ahd, &flags);
2420 }
2421
2422 static void ahd_linux_set_dt(struct scsi_target *starget, int dt)
2423 {
2424 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2425 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2426 struct ahd_tmode_tstate *tstate;
2427 struct ahd_initiator_tinfo *tinfo
2428 = ahd_fetch_transinfo(ahd,
2429 starget->channel + 'A',
2430 shost->this_id, starget->id, &tstate);
2431 struct ahd_devinfo devinfo;
2432 unsigned int ppr_options = tinfo->goal.ppr_options
2433 & ~MSG_EXT_PPR_DT_REQ;
2434 unsigned int period = tinfo->goal.period;
2435 unsigned int width = tinfo->goal.width;
2436 unsigned long flags;
2437
2438 #ifdef AHD_DEBUG
2439 if ((ahd_debug & AHD_SHOW_DV) != 0)
2440 printf("%s: %s DT\n", ahd_name(ahd),
2441 dt ? "enabling" : "disabling");
2442 #endif
2443 if (dt) {
2444 ppr_options |= MSG_EXT_PPR_DT_REQ;
2445 if (!width)
2446 ahd_linux_set_width(starget, 1);
2447 } else {
2448 if (period <= 9)
2449 period = 10; /* If resetting DT, period must be >= 25ns */
2450 /* IU is invalid without DT set */
2451 ppr_options &= ~MSG_EXT_PPR_IU_REQ;
2452 }
2453 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2454 starget->channel + 'A', ROLE_INITIATOR);
2455 ahd_find_syncrate(ahd, &period, &ppr_options,
2456 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2457
2458 ahd_lock(ahd, &flags);
2459 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2460 ppr_options, AHD_TRANS_GOAL, FALSE);
2461 ahd_unlock(ahd, &flags);
2462 }
2463
2464 static void ahd_linux_set_qas(struct scsi_target *starget, int qas)
2465 {
2466 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2467 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2468 struct ahd_tmode_tstate *tstate;
2469 struct ahd_initiator_tinfo *tinfo
2470 = ahd_fetch_transinfo(ahd,
2471 starget->channel + 'A',
2472 shost->this_id, starget->id, &tstate);
2473 struct ahd_devinfo devinfo;
2474 unsigned int ppr_options = tinfo->goal.ppr_options
2475 & ~MSG_EXT_PPR_QAS_REQ;
2476 unsigned int period = tinfo->goal.period;
2477 unsigned int dt;
2478 unsigned long flags;
2479
2480 #ifdef AHD_DEBUG
2481 if ((ahd_debug & AHD_SHOW_DV) != 0)
2482 printf("%s: %s QAS\n", ahd_name(ahd),
2483 qas ? "enabling" : "disabling");
2484 #endif
2485
2486 if (qas) {
2487 ppr_options |= MSG_EXT_PPR_QAS_REQ;
2488 }
2489
2490 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2491
2492 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2493 starget->channel + 'A', ROLE_INITIATOR);
2494 ahd_find_syncrate(ahd, &period, &ppr_options,
2495 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2496
2497 ahd_lock(ahd, &flags);
2498 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2499 ppr_options, AHD_TRANS_GOAL, FALSE);
2500 ahd_unlock(ahd, &flags);
2501 }
2502
2503 static void ahd_linux_set_iu(struct scsi_target *starget, int iu)
2504 {
2505 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2506 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2507 struct ahd_tmode_tstate *tstate;
2508 struct ahd_initiator_tinfo *tinfo
2509 = ahd_fetch_transinfo(ahd,
2510 starget->channel + 'A',
2511 shost->this_id, starget->id, &tstate);
2512 struct ahd_devinfo devinfo;
2513 unsigned int ppr_options = tinfo->goal.ppr_options
2514 & ~MSG_EXT_PPR_IU_REQ;
2515 unsigned int period = tinfo->goal.period;
2516 unsigned int dt;
2517 unsigned long flags;
2518
2519 #ifdef AHD_DEBUG
2520 if ((ahd_debug & AHD_SHOW_DV) != 0)
2521 printf("%s: %s IU\n", ahd_name(ahd),
2522 iu ? "enabling" : "disabling");
2523 #endif
2524
2525 if (iu) {
2526 ppr_options |= MSG_EXT_PPR_IU_REQ;
2527 ppr_options |= MSG_EXT_PPR_DT_REQ; /* IU requires DT */
2528 }
2529
2530 dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2531
2532 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2533 starget->channel + 'A', ROLE_INITIATOR);
2534 ahd_find_syncrate(ahd, &period, &ppr_options,
2535 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2536
2537 ahd_lock(ahd, &flags);
2538 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2539 ppr_options, AHD_TRANS_GOAL, FALSE);
2540 ahd_unlock(ahd, &flags);
2541 }
2542
2543 static void ahd_linux_set_rd_strm(struct scsi_target *starget, int rdstrm)
2544 {
2545 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2546 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2547 struct ahd_tmode_tstate *tstate;
2548 struct ahd_initiator_tinfo *tinfo
2549 = ahd_fetch_transinfo(ahd,
2550 starget->channel + 'A',
2551 shost->this_id, starget->id, &tstate);
2552 struct ahd_devinfo devinfo;
2553 unsigned int ppr_options = tinfo->goal.ppr_options
2554 & ~MSG_EXT_PPR_RD_STRM;
2555 unsigned int period = tinfo->goal.period;
2556 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2557 unsigned long flags;
2558
2559 #ifdef AHD_DEBUG
2560 if ((ahd_debug & AHD_SHOW_DV) != 0)
2561 printf("%s: %s Read Streaming\n", ahd_name(ahd),
2562 rdstrm ? "enabling" : "disabling");
2563 #endif
2564
2565 if (rdstrm)
2566 ppr_options |= MSG_EXT_PPR_RD_STRM;
2567
2568 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2569 starget->channel + 'A', ROLE_INITIATOR);
2570 ahd_find_syncrate(ahd, &period, &ppr_options,
2571 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2572
2573 ahd_lock(ahd, &flags);
2574 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2575 ppr_options, AHD_TRANS_GOAL, FALSE);
2576 ahd_unlock(ahd, &flags);
2577 }
2578
2579 static void ahd_linux_set_wr_flow(struct scsi_target *starget, int wrflow)
2580 {
2581 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2582 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2583 struct ahd_tmode_tstate *tstate;
2584 struct ahd_initiator_tinfo *tinfo
2585 = ahd_fetch_transinfo(ahd,
2586 starget->channel + 'A',
2587 shost->this_id, starget->id, &tstate);
2588 struct ahd_devinfo devinfo;
2589 unsigned int ppr_options = tinfo->goal.ppr_options
2590 & ~MSG_EXT_PPR_WR_FLOW;
2591 unsigned int period = tinfo->goal.period;
2592 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2593 unsigned long flags;
2594
2595 #ifdef AHD_DEBUG
2596 if ((ahd_debug & AHD_SHOW_DV) != 0)
2597 printf("%s: %s Write Flow Control\n", ahd_name(ahd),
2598 wrflow ? "enabling" : "disabling");
2599 #endif
2600
2601 if (wrflow)
2602 ppr_options |= MSG_EXT_PPR_WR_FLOW;
2603
2604 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2605 starget->channel + 'A', ROLE_INITIATOR);
2606 ahd_find_syncrate(ahd, &period, &ppr_options,
2607 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2608
2609 ahd_lock(ahd, &flags);
2610 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2611 ppr_options, AHD_TRANS_GOAL, FALSE);
2612 ahd_unlock(ahd, &flags);
2613 }
2614
2615 static void ahd_linux_set_rti(struct scsi_target *starget, int rti)
2616 {
2617 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2618 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2619 struct ahd_tmode_tstate *tstate;
2620 struct ahd_initiator_tinfo *tinfo
2621 = ahd_fetch_transinfo(ahd,
2622 starget->channel + 'A',
2623 shost->this_id, starget->id, &tstate);
2624 struct ahd_devinfo devinfo;
2625 unsigned int ppr_options = tinfo->goal.ppr_options
2626 & ~MSG_EXT_PPR_RTI;
2627 unsigned int period = tinfo->goal.period;
2628 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2629 unsigned long flags;
2630
2631 if ((ahd->features & AHD_RTI) == 0) {
2632 #ifdef AHD_DEBUG
2633 if ((ahd_debug & AHD_SHOW_DV) != 0)
2634 printf("%s: RTI not available\n", ahd_name(ahd));
2635 #endif
2636 return;
2637 }
2638
2639 #ifdef AHD_DEBUG
2640 if ((ahd_debug & AHD_SHOW_DV) != 0)
2641 printf("%s: %s RTI\n", ahd_name(ahd),
2642 rti ? "enabling" : "disabling");
2643 #endif
2644
2645 if (rti)
2646 ppr_options |= MSG_EXT_PPR_RTI;
2647
2648 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2649 starget->channel + 'A', ROLE_INITIATOR);
2650 ahd_find_syncrate(ahd, &period, &ppr_options,
2651 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2652
2653 ahd_lock(ahd, &flags);
2654 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2655 ppr_options, AHD_TRANS_GOAL, FALSE);
2656 ahd_unlock(ahd, &flags);
2657 }
2658
2659 static void ahd_linux_set_pcomp_en(struct scsi_target *starget, int pcomp)
2660 {
2661 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2662 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2663 struct ahd_tmode_tstate *tstate;
2664 struct ahd_initiator_tinfo *tinfo
2665 = ahd_fetch_transinfo(ahd,
2666 starget->channel + 'A',
2667 shost->this_id, starget->id, &tstate);
2668 struct ahd_devinfo devinfo;
2669 unsigned int ppr_options = tinfo->goal.ppr_options
2670 & ~MSG_EXT_PPR_PCOMP_EN;
2671 unsigned int period = tinfo->goal.period;
2672 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2673 unsigned long flags;
2674
2675 #ifdef AHD_DEBUG
2676 if ((ahd_debug & AHD_SHOW_DV) != 0)
2677 printf("%s: %s Precompensation\n", ahd_name(ahd),
2678 pcomp ? "Enable" : "Disable");
2679 #endif
2680
2681 if (pcomp)
2682 ppr_options |= MSG_EXT_PPR_PCOMP_EN;
2683
2684 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2685 starget->channel + 'A', ROLE_INITIATOR);
2686 ahd_find_syncrate(ahd, &period, &ppr_options,
2687 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2688
2689 ahd_lock(ahd, &flags);
2690 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2691 ppr_options, AHD_TRANS_GOAL, FALSE);
2692 ahd_unlock(ahd, &flags);
2693 }
2694
2695 static void ahd_linux_set_hold_mcs(struct scsi_target *starget, int hold)
2696 {
2697 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
2698 struct ahd_softc *ahd = *((struct ahd_softc **)shost->hostdata);
2699 struct ahd_tmode_tstate *tstate;
2700 struct ahd_initiator_tinfo *tinfo
2701 = ahd_fetch_transinfo(ahd,
2702 starget->channel + 'A',
2703 shost->this_id, starget->id, &tstate);
2704 struct ahd_devinfo devinfo;
2705 unsigned int ppr_options = tinfo->goal.ppr_options
2706 & ~MSG_EXT_PPR_HOLD_MCS;
2707 unsigned int period = tinfo->goal.period;
2708 unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ;
2709 unsigned long flags;
2710
2711 if (hold)
2712 ppr_options |= MSG_EXT_PPR_HOLD_MCS;
2713
2714 ahd_compile_devinfo(&devinfo, shost->this_id, starget->id, 0,
2715 starget->channel + 'A', ROLE_INITIATOR);
2716 ahd_find_syncrate(ahd, &period, &ppr_options,
2717 dt ? AHD_SYNCRATE_MAX : AHD_SYNCRATE_ULTRA2);
2718
2719 ahd_lock(ahd, &flags);
2720 ahd_set_syncrate(ahd, &devinfo, period, tinfo->goal.offset,
2721 ppr_options, AHD_TRANS_GOAL, FALSE);
2722 ahd_unlock(ahd, &flags);
2723 }
2724
2725
2726
2727 static struct spi_function_template ahd_linux_transport_functions = {
2728 .set_offset = ahd_linux_set_offset,
2729 .show_offset = 1,
2730 .set_period = ahd_linux_set_period,
2731 .show_period = 1,
2732 .set_width = ahd_linux_set_width,
2733 .show_width = 1,
2734 .set_dt = ahd_linux_set_dt,
2735 .show_dt = 1,
2736 .set_iu = ahd_linux_set_iu,
2737 .show_iu = 1,
2738 .set_qas = ahd_linux_set_qas,
2739 .show_qas = 1,
2740 .set_rd_strm = ahd_linux_set_rd_strm,
2741 .show_rd_strm = 1,
2742 .set_wr_flow = ahd_linux_set_wr_flow,
2743 .show_wr_flow = 1,
2744 .set_rti = ahd_linux_set_rti,
2745 .show_rti = 1,
2746 .set_pcomp_en = ahd_linux_set_pcomp_en,
2747 .show_pcomp_en = 1,
2748 .set_hold_mcs = ahd_linux_set_hold_mcs,
2749 .show_hold_mcs = 1,
2750 };
2751
2752 static int __init
2753 ahd_linux_init(void)
2754 {
2755 int error = 0;
2756
2757 /*
2758 * If we've been passed any parameters, process them now.
2759 */
2760 if (aic79xx)
2761 aic79xx_setup(aic79xx);
2762
2763 ahd_linux_transport_template =
2764 spi_attach_transport(&ahd_linux_transport_functions);
2765 if (!ahd_linux_transport_template)
2766 return -ENODEV;
2767
2768 scsi_transport_reserve_target(ahd_linux_transport_template,
2769 sizeof(struct ahd_linux_target));
2770 scsi_transport_reserve_device(ahd_linux_transport_template,
2771 sizeof(struct ahd_linux_device));
2772
2773 error = ahd_linux_pci_init();
2774 if (error)
2775 spi_release_transport(ahd_linux_transport_template);
2776 return error;
2777 }
2778
2779 static void __exit
2780 ahd_linux_exit(void)
2781 {
2782 ahd_linux_pci_exit();
2783 spi_release_transport(ahd_linux_transport_template);
2784 }
2785
2786 module_init(ahd_linux_init);
2787 module_exit(ahd_linux_exit);