drivers/regulator/wm8400-regulator.c

   1 /*
   2  * Regulator support for WM8400
   3  *
   4  * Copyright 2008 Wolfson Microelectronics PLC.
   5  *
   6  * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of the
  11  * License, or (at your option) any later version.
  12  *
  13  */
  14
  15 #include <linux/bug.h>
  16 #include <linux/err.h>
  17 #include <linux/kernel.h>
  18 #include <linux/module.h>
  19 #include <linux/regulator/driver.h>
  20 #include <linux/mfd/wm8400-private.h>
  21
  22 static int wm8400_ldo_list_voltage(struct regulator_dev *dev,
  23                                    unsigned selector)
  24 {
  25         if (selector > WM8400_LDO1_VSEL_MASK)
  26                 return -EINVAL;
  27
  28         if (selector < 15)
  29                 return 900000 + (selector * 50000);
  30         else
  31                 return 1600000 + ((selector - 14) * 100000);
  32 }
  33
  34 static int wm8400_ldo_map_voltage(struct regulator_dev *dev,
  35                                   int min_uV, int max_uV)
  36 {
  37         u16 val;
  38
  39         if (min_uV < 900000 || min_uV > 3300000)
  40                 return -EINVAL;
  41
  42         if (min_uV < 1700000) {
  43                 /* Steps of 50mV from 900mV;  */
  44                 val = DIV_ROUND_UP(min_uV - 900000, 50000);
  45
  46                 if ((val * 50000) + 900000 > max_uV)
  47                         return -EINVAL;
  48                 BUG_ON((val * 50000) + 900000 < min_uV);
  49         } else {
  50                 /* Steps of 100mV from 1700mV */
  51                 val = DIV_ROUND_UP(min_uV - 1700000, 100000);
  52
  53                 if ((val * 100000) + 1700000 > max_uV)
  54                         return -EINVAL;
  55                 BUG_ON((val * 100000) + 1700000 < min_uV);
  56
  57                 val += 0xf;
  58         }
  59
  60         return val;
  61 }
  62
  63 static struct regulator_ops wm8400_ldo_ops = {
  64         .is_enabled = regulator_is_enabled_regmap,
  65         .enable = regulator_enable_regmap,
  66         .disable = regulator_disable_regmap,
  67         .list_voltage = wm8400_ldo_list_voltage,
  68         .get_voltage_sel = regulator_get_voltage_sel_regmap,
  69         .set_voltage_sel = regulator_set_voltage_sel_regmap,
  70         .map_voltage = wm8400_ldo_map_voltage,
  71 };
  72
  73 static unsigned int wm8400_dcdc_get_mode(struct regulator_dev *dev)
  74 {
  75         struct wm8400 *wm8400 = rdev_get_drvdata(dev);
  76         int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2;
  77         u16 data[2];
  78         int ret;
  79
  80         ret = wm8400_block_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset, 2,
  81                                 data);
  82         if (ret != 0)
  83                 return 0;
  84
  85         /* Datasheet: hibernate */
  86         if (data[0] & WM8400_DC1_SLEEP)
  87                 return REGULATOR_MODE_STANDBY;
  88
  89         /* Datasheet: standby */
  90         if (!(data[0] & WM8400_DC1_ACTIVE))
  91                 return REGULATOR_MODE_IDLE;
  92
  93         /* Datasheet: active with or without force PWM */
  94         if (data[1] & WM8400_DC1_FRC_PWM)
  95                 return REGULATOR_MODE_FAST;
  96         else
  97                 return REGULATOR_MODE_NORMAL;
  98 }
  99
 100 static int wm8400_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode)
 101 {
 102         struct wm8400 *wm8400 = rdev_get_drvdata(dev);
 103         int offset = (rdev_get_id(dev) - WM8400_DCDC1) * 2;
 104         int ret;
 105
 106         switch (mode) {
 107         case REGULATOR_MODE_FAST:
 108                 /* Datasheet: active with force PWM */
 109                 ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset,
 110                                       WM8400_DC1_FRC_PWM, WM8400_DC1_FRC_PWM);
 111                 if (ret != 0)
 112                         return ret;
 113
 114                 return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset,
 115                                        WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP,
 116                                        WM8400_DC1_ACTIVE);
 117
 118         case REGULATOR_MODE_NORMAL:
 119                 /* Datasheet: active */
 120                 ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_2 + offset,
 121                                       WM8400_DC1_FRC_PWM, 0);
 122                 if (ret != 0)
 123                         return ret;
 124
 125                 return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset,
 126                                        WM8400_DC1_ACTIVE | WM8400_DC1_SLEEP,
 127                                        WM8400_DC1_ACTIVE);
 128
 129         case REGULATOR_MODE_IDLE:
 130                 /* Datasheet: standby */
 131                 ret = wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset,
 132                                       WM8400_DC1_ACTIVE, 0);
 133                 if (ret != 0)
 134                         return ret;
 135                 return wm8400_set_bits(wm8400, WM8400_DCDC1_CONTROL_1 + offset,
 136                                        WM8400_DC1_SLEEP, 0);
 137
 138         default:
 139                 return -EINVAL;
 140         }
 141 }
 142
 143 static unsigned int wm8400_dcdc_get_optimum_mode(struct regulator_dev *dev,
 144                                                  int input_uV, int output_uV,
 145                                                  int load_uA)
 146 {
 147         return REGULATOR_MODE_NORMAL;
 148 }
 149
 150 static struct regulator_ops wm8400_dcdc_ops = {
 151         .is_enabled = regulator_is_enabled_regmap,
 152         .enable = regulator_enable_regmap,
 153         .disable = regulator_disable_regmap,
 154         .list_voltage = regulator_list_voltage_linear,
 155         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 156         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 157         .get_mode = wm8400_dcdc_get_mode,
 158         .set_mode = wm8400_dcdc_set_mode,
 159         .get_optimum_mode = wm8400_dcdc_get_optimum_mode,
 160 };
 161
 162 static struct regulator_desc regulators[] = {
 163         {
 164                 .name = "LDO1",
 165                 .id = WM8400_LDO1,
 166                 .ops = &wm8400_ldo_ops,
 167                 .enable_reg = WM8400_LDO1_CONTROL,
 168                 .enable_mask = WM8400_LDO1_ENA,
 169                 .n_voltages = WM8400_LDO1_VSEL_MASK + 1,
 170                 .vsel_reg = WM8400_LDO1_CONTROL,
 171                 .vsel_mask = WM8400_LDO1_VSEL_MASK,
 172                 .type = REGULATOR_VOLTAGE,
 173                 .owner = THIS_MODULE,
 174         },
 175         {
 176                 .name = "LDO2",
 177                 .id = WM8400_LDO2,
 178                 .ops = &wm8400_ldo_ops,
 179                 .enable_reg = WM8400_LDO2_CONTROL,
 180                 .enable_mask = WM8400_LDO2_ENA,
 181                 .n_voltages = WM8400_LDO2_VSEL_MASK + 1,
 182                 .type = REGULATOR_VOLTAGE,
 183                 .vsel_reg = WM8400_LDO2_CONTROL,
 184                 .vsel_mask = WM8400_LDO2_VSEL_MASK,
 185                 .owner = THIS_MODULE,
 186         },
 187         {
 188                 .name = "LDO3",
 189                 .id = WM8400_LDO3,
 190                 .ops = &wm8400_ldo_ops,
 191                 .enable_reg = WM8400_LDO3_CONTROL,
 192                 .enable_mask = WM8400_LDO3_ENA,
 193                 .n_voltages = WM8400_LDO3_VSEL_MASK + 1,
 194                 .vsel_reg = WM8400_LDO3_CONTROL,
 195                 .vsel_mask = WM8400_LDO3_VSEL_MASK,
 196                 .type = REGULATOR_VOLTAGE,
 197                 .owner = THIS_MODULE,
 198         },
 199         {
 200                 .name = "LDO4",
 201                 .id = WM8400_LDO4,
 202                 .ops = &wm8400_ldo_ops,
 203                 .enable_reg = WM8400_LDO4_CONTROL,
 204                 .enable_mask = WM8400_LDO4_ENA,
 205                 .n_voltages = WM8400_LDO4_VSEL_MASK + 1,
 206                 .vsel_reg = WM8400_LDO4_CONTROL,
 207                 .vsel_mask = WM8400_LDO4_VSEL_MASK,
 208                 .type = REGULATOR_VOLTAGE,
 209                 .owner = THIS_MODULE,
 210         },
 211         {
 212                 .name = "DCDC1",
 213                 .id = WM8400_DCDC1,
 214                 .ops = &wm8400_dcdc_ops,
 215                 .enable_reg = WM8400_DCDC1_CONTROL_1,
 216                 .enable_mask = WM8400_DC1_ENA_MASK,
 217                 .n_voltages = WM8400_DC1_VSEL_MASK + 1,
 218                 .vsel_reg = WM8400_DCDC1_CONTROL_1,
 219                 .vsel_mask = WM8400_DC1_VSEL_MASK,
 220                 .min_uV = 850000,
 221                 .uV_step = 25000,
 222                 .type = REGULATOR_VOLTAGE,
 223                 .owner = THIS_MODULE,
 224         },
 225         {
 226                 .name = "DCDC2",
 227                 .id = WM8400_DCDC2,
 228                 .ops = &wm8400_dcdc_ops,
 229                 .enable_reg = WM8400_DCDC2_CONTROL_1,
 230                 .enable_mask = WM8400_DC1_ENA_MASK,
 231                 .n_voltages = WM8400_DC2_VSEL_MASK + 1,
 232                 .vsel_reg = WM8400_DCDC2_CONTROL_1,
 233                 .vsel_mask = WM8400_DC2_VSEL_MASK,
 234                 .min_uV = 850000,
 235                 .uV_step = 25000,
 236                 .type = REGULATOR_VOLTAGE,
 237                 .owner = THIS_MODULE,
 238         },
 239 };
 240
 241 static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 242 {
 243         struct wm8400 *wm8400 = container_of(pdev, struct wm8400, regulators[pdev->id]);
 244         struct regulator_config config = { };
 245         struct regulator_dev *rdev;
 246
 247         config.dev = &pdev->dev;
 248         config.init_data = pdev->dev.platform_data;
 249         config.driver_data = wm8400;
 250         config.regmap = wm8400->regmap;
 251
 252         rdev = regulator_register(&regulators[pdev->id], &config);
 253         if (IS_ERR(rdev))
 254                 return PTR_ERR(rdev);
 255
 256         platform_set_drvdata(pdev, rdev);
 257
 258         return 0;
 259 }
 260
 261 static int __devexit wm8400_regulator_remove(struct platform_device *pdev)
 262 {
 263         struct regulator_dev *rdev = platform_get_drvdata(pdev);
 264
 265         platform_set_drvdata(pdev, NULL);
 266         regulator_unregister(rdev);
 267
 268         return 0;
 269 }
 270
 271 static struct platform_driver wm8400_regulator_driver = {
 272         .driver = {
 273                 .name = "wm8400-regulator",
 274         },
 275         .probe = wm8400_regulator_probe,
 276         .remove = __devexit_p(wm8400_regulator_remove),
 277 };
 278
 279 /**
 280  * wm8400_register_regulator - enable software control of a WM8400 regulator
 281  *
 282  * This function enables software control of a WM8400 regulator via
 283  * the regulator API.  It is intended to be called from the
 284  * platform_init() callback of the WM8400 MFD driver.
 285  *
 286  * @param dev      The WM8400 device to operate on.
 287  * @param reg      The regulator to control.
 288  * @param initdata Regulator initdata for the regulator.
 289  */
 290 int wm8400_register_regulator(struct device *dev, int reg,
 291                               struct regulator_init_data *initdata)
 292 {
 293         struct wm8400 *wm8400 = dev_get_drvdata(dev);
 294
 295         if (wm8400->regulators[reg].name)
 296                 return -EBUSY;
 297
 298         initdata->driver_data = wm8400;
 299
 300         wm8400->regulators[reg].name = "wm8400-regulator";
 301         wm8400->regulators[reg].id = reg;
 302         wm8400->regulators[reg].dev.parent = dev;
 303         wm8400->regulators[reg].dev.platform_data = initdata;
 304
 305         return platform_device_register(&wm8400->regulators[reg]);
 306 }
 307 EXPORT_SYMBOL_GPL(wm8400_register_regulator);
 308
 309 static int __init wm8400_regulator_init(void)
 310 {
 311         return platform_driver_register(&wm8400_regulator_driver);
 312 }
 313 subsys_initcall(wm8400_regulator_init);
 314
 315 static void __exit wm8400_regulator_exit(void)
 316 {
 317         platform_driver_unregister(&wm8400_regulator_driver);
 318 }
 319 module_exit(wm8400_regulator_exit);
 320
 321 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 322 MODULE_DESCRIPTION("WM8400 regulator driver");
 323 MODULE_LICENSE("GPL");
 324 MODULE_ALIAS("platform:wm8400-regulator");