2 * Marvell Wireless LAN device driver: CFG80211
4 * Copyright (C) 2011, Marvell International Ltd.
6 * This software file (the "File") is distributed by Marvell International
7 * Ltd. under the terms of the GNU General Public License Version 2, June 1991
8 * (the "License"). You may use, redistribute and/or modify this File in
9 * accordance with the terms and conditions of the License, a copy of which
10 * is available by writing to the Free Software Foundation, Inc.,
11 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
12 * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
14 * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
15 * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
16 * ARE EXPRESSLY DISCLAIMED. The License provides additional details about
17 * this warranty disclaimer.
23 static const struct ieee80211_iface_limit mwifiex_ap_sta_limits
[] = {
25 .max
= 2, .types
= BIT(NL80211_IFTYPE_STATION
),
28 .max
= 1, .types
= BIT(NL80211_IFTYPE_AP
),
32 static const struct ieee80211_iface_combination mwifiex_iface_comb_ap_sta
= {
33 .limits
= mwifiex_ap_sta_limits
,
34 .num_different_channels
= 1,
35 .n_limits
= ARRAY_SIZE(mwifiex_ap_sta_limits
),
36 .max_interfaces
= MWIFIEX_MAX_BSS_NUM
,
37 .beacon_int_infra_match
= true,
40 static const struct ieee80211_regdomain mwifiex_world_regdom_custom
= {
45 REG_RULE(2412-10, 2462+10, 40, 3, 20, 0),
47 REG_RULE(2467-10, 2472+10, 20, 3, 20,
48 NL80211_RRF_PASSIVE_SCAN
| NL80211_RRF_NO_IBSS
),
50 REG_RULE(2484-10, 2484+10, 20, 3, 20,
51 NL80211_RRF_PASSIVE_SCAN
| NL80211_RRF_NO_IBSS
|
54 REG_RULE(5180-10, 5240+10, 40, 3, 20,
55 NL80211_RRF_PASSIVE_SCAN
| NL80211_RRF_NO_IBSS
),
56 /* Channel 149 - 165 */
57 REG_RULE(5745-10, 5825+10, 40, 3, 20,
58 NL80211_RRF_PASSIVE_SCAN
| NL80211_RRF_NO_IBSS
),
60 REG_RULE(5260-10, 5320+10, 40, 3, 30,
61 NL80211_RRF_PASSIVE_SCAN
| NL80211_RRF_NO_IBSS
|
63 /* Channel 100 - 140 */
64 REG_RULE(5500-10, 5700+10, 40, 3, 30,
65 NL80211_RRF_PASSIVE_SCAN
| NL80211_RRF_NO_IBSS
|
71 * This function maps the nl802.11 channel type into driver channel type.
73 * The mapping is as follows -
74 * NL80211_CHAN_NO_HT -> IEEE80211_HT_PARAM_CHA_SEC_NONE
75 * NL80211_CHAN_HT20 -> IEEE80211_HT_PARAM_CHA_SEC_NONE
76 * NL80211_CHAN_HT40PLUS -> IEEE80211_HT_PARAM_CHA_SEC_ABOVE
77 * NL80211_CHAN_HT40MINUS -> IEEE80211_HT_PARAM_CHA_SEC_BELOW
78 * Others -> IEEE80211_HT_PARAM_CHA_SEC_NONE
80 u8
mwifiex_chan_type_to_sec_chan_offset(enum nl80211_channel_type chan_type
)
83 case NL80211_CHAN_NO_HT
:
84 case NL80211_CHAN_HT20
:
85 return IEEE80211_HT_PARAM_CHA_SEC_NONE
;
86 case NL80211_CHAN_HT40PLUS
:
87 return IEEE80211_HT_PARAM_CHA_SEC_ABOVE
;
88 case NL80211_CHAN_HT40MINUS
:
89 return IEEE80211_HT_PARAM_CHA_SEC_BELOW
;
91 return IEEE80211_HT_PARAM_CHA_SEC_NONE
;
96 * This function checks whether WEP is set.
99 mwifiex_is_alg_wep(u32 cipher
)
102 case WLAN_CIPHER_SUITE_WEP40
:
103 case WLAN_CIPHER_SUITE_WEP104
:
113 * This function retrieves the private structure from kernel wiphy structure.
115 static void *mwifiex_cfg80211_get_adapter(struct wiphy
*wiphy
)
117 return (void *) (*(unsigned long *) wiphy_priv(wiphy
));
121 * CFG802.11 operation handler to delete a network key.
124 mwifiex_cfg80211_del_key(struct wiphy
*wiphy
, struct net_device
*netdev
,
125 u8 key_index
, bool pairwise
, const u8
*mac_addr
)
127 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(netdev
);
128 const u8 bc_mac
[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
129 const u8
*peer_mac
= pairwise
? mac_addr
: bc_mac
;
131 if (mwifiex_set_encode(priv
, NULL
, NULL
, 0, key_index
, peer_mac
, 1)) {
132 wiphy_err(wiphy
, "deleting the crypto keys\n");
136 wiphy_dbg(wiphy
, "info: crypto keys deleted\n");
141 * This function forms an skb for management frame.
144 mwifiex_form_mgmt_frame(struct sk_buff
*skb
, const u8
*buf
, size_t len
)
146 u8 addr
[ETH_ALEN
] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
148 u32 tx_control
= 0, pkt_type
= PKT_TYPE_MGMT
;
151 pkt_len
= len
+ ETH_ALEN
;
153 skb_reserve(skb
, MWIFIEX_MIN_DATA_HEADER_LEN
+
154 MWIFIEX_MGMT_FRAME_HEADER_SIZE
+ sizeof(pkt_len
));
155 memcpy(skb_push(skb
, sizeof(pkt_len
)), &pkt_len
, sizeof(pkt_len
));
157 memcpy(skb_push(skb
, sizeof(tx_control
)),
158 &tx_control
, sizeof(tx_control
));
160 memcpy(skb_push(skb
, sizeof(pkt_type
)), &pkt_type
, sizeof(pkt_type
));
162 /* Add packet data and address4 */
163 memcpy(skb_put(skb
, sizeof(struct ieee80211_hdr_3addr
)), buf
,
164 sizeof(struct ieee80211_hdr_3addr
));
165 memcpy(skb_put(skb
, ETH_ALEN
), addr
, ETH_ALEN
);
166 memcpy(skb_put(skb
, len
- sizeof(struct ieee80211_hdr_3addr
)),
167 buf
+ sizeof(struct ieee80211_hdr_3addr
),
168 len
- sizeof(struct ieee80211_hdr_3addr
));
170 skb
->priority
= LOW_PRIO_TID
;
171 do_gettimeofday(&tv
);
172 skb
->tstamp
= timeval_to_ktime(tv
);
178 * CFG802.11 operation handler to transmit a management frame.
181 mwifiex_cfg80211_mgmt_tx(struct wiphy
*wiphy
, struct wireless_dev
*wdev
,
182 struct ieee80211_channel
*chan
, bool offchan
,
183 unsigned int wait
, const u8
*buf
, size_t len
,
184 bool no_cck
, bool dont_wait_for_ack
, u64
*cookie
)
188 const struct ieee80211_mgmt
*mgmt
;
189 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(wdev
->netdev
);
192 wiphy_err(wiphy
, "invalid buffer and length\n");
196 mgmt
= (const struct ieee80211_mgmt
*)buf
;
197 if (GET_BSS_ROLE(priv
) != MWIFIEX_BSS_ROLE_STA
&&
198 ieee80211_is_probe_resp(mgmt
->frame_control
)) {
199 /* Since we support offload probe resp, we need to skip probe
200 * resp in AP or GO mode */
202 "info: skip to send probe resp in AP or GO mode\n");
206 pkt_len
= len
+ ETH_ALEN
;
207 skb
= dev_alloc_skb(MWIFIEX_MIN_DATA_HEADER_LEN
+
208 MWIFIEX_MGMT_FRAME_HEADER_SIZE
+
209 pkt_len
+ sizeof(pkt_len
));
212 wiphy_err(wiphy
, "allocate skb failed for management frame\n");
216 mwifiex_form_mgmt_frame(skb
, buf
, len
);
217 mwifiex_queue_tx_pkt(priv
, skb
);
219 *cookie
= random32() | 1;
220 cfg80211_mgmt_tx_status(wdev
, *cookie
, buf
, len
, true, GFP_ATOMIC
);
222 wiphy_dbg(wiphy
, "info: management frame transmitted\n");
227 * CFG802.11 operation handler to register a mgmt frame.
230 mwifiex_cfg80211_mgmt_frame_register(struct wiphy
*wiphy
,
231 struct wireless_dev
*wdev
,
232 u16 frame_type
, bool reg
)
234 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(wdev
->netdev
);
237 priv
->mgmt_frame_mask
|= BIT(frame_type
>> 4);
239 priv
->mgmt_frame_mask
&= ~BIT(frame_type
>> 4);
241 mwifiex_send_cmd_async(priv
, HostCmd_CMD_MGMT_FRAME_REG
,
242 HostCmd_ACT_GEN_SET
, 0, &priv
->mgmt_frame_mask
);
244 wiphy_dbg(wiphy
, "info: mgmt frame registered\n");
248 * CFG802.11 operation handler to remain on channel.
251 mwifiex_cfg80211_remain_on_channel(struct wiphy
*wiphy
,
252 struct wireless_dev
*wdev
,
253 struct ieee80211_channel
*chan
,
254 unsigned int duration
, u64
*cookie
)
256 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(wdev
->netdev
);
259 if (!chan
|| !cookie
) {
260 wiphy_err(wiphy
, "Invalid parameter for ROC\n");
264 if (priv
->roc_cfg
.cookie
) {
265 wiphy_dbg(wiphy
, "info: ongoing ROC, cookie = 0x%llu\n",
266 priv
->roc_cfg
.cookie
);
270 ret
= mwifiex_remain_on_chan_cfg(priv
, HostCmd_ACT_GEN_SET
, chan
,
274 *cookie
= random32() | 1;
275 priv
->roc_cfg
.cookie
= *cookie
;
276 priv
->roc_cfg
.chan
= *chan
;
278 cfg80211_ready_on_channel(wdev
, *cookie
, chan
,
279 duration
, GFP_ATOMIC
);
281 wiphy_dbg(wiphy
, "info: ROC, cookie = 0x%llx\n", *cookie
);
288 * CFG802.11 operation handler to cancel remain on channel.
291 mwifiex_cfg80211_cancel_remain_on_channel(struct wiphy
*wiphy
,
292 struct wireless_dev
*wdev
, u64 cookie
)
294 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(wdev
->netdev
);
297 if (cookie
!= priv
->roc_cfg
.cookie
)
300 ret
= mwifiex_remain_on_chan_cfg(priv
, HostCmd_ACT_GEN_REMOVE
,
301 &priv
->roc_cfg
.chan
, 0);
304 cfg80211_remain_on_channel_expired(wdev
, cookie
,
308 memset(&priv
->roc_cfg
, 0, sizeof(struct mwifiex_roc_cfg
));
310 wiphy_dbg(wiphy
, "info: cancel ROC, cookie = 0x%llx\n", cookie
);
317 * CFG802.11 operation handler to set Tx power.
320 mwifiex_cfg80211_set_tx_power(struct wiphy
*wiphy
,
321 struct wireless_dev
*wdev
,
322 enum nl80211_tx_power_setting type
,
325 struct mwifiex_adapter
*adapter
= mwifiex_cfg80211_get_adapter(wiphy
);
326 struct mwifiex_private
*priv
;
327 struct mwifiex_power_cfg power_cfg
;
328 int dbm
= MBM_TO_DBM(mbm
);
330 if (type
== NL80211_TX_POWER_FIXED
) {
331 power_cfg
.is_power_auto
= 0;
332 power_cfg
.power_level
= dbm
;
334 power_cfg
.is_power_auto
= 1;
337 priv
= mwifiex_get_priv(adapter
, MWIFIEX_BSS_ROLE_ANY
);
339 return mwifiex_set_tx_power(priv
, &power_cfg
);
343 * CFG802.11 operation handler to set Power Save option.
345 * The timeout value, if provided, is currently ignored.
348 mwifiex_cfg80211_set_power_mgmt(struct wiphy
*wiphy
,
349 struct net_device
*dev
,
350 bool enabled
, int timeout
)
352 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
357 "info: ignore timeout value for IEEE Power Save\n");
361 return mwifiex_drv_set_power(priv
, &ps_mode
);
365 * CFG802.11 operation handler to set the default network key.
368 mwifiex_cfg80211_set_default_key(struct wiphy
*wiphy
, struct net_device
*netdev
,
369 u8 key_index
, bool unicast
,
372 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(netdev
);
374 /* Return if WEP key not configured */
375 if (!priv
->sec_info
.wep_enabled
)
378 if (priv
->bss_type
== MWIFIEX_BSS_TYPE_UAP
) {
379 priv
->wep_key_curr_index
= key_index
;
380 } else if (mwifiex_set_encode(priv
, NULL
, NULL
, 0, key_index
,
382 wiphy_err(wiphy
, "set default Tx key index\n");
390 * CFG802.11 operation handler to add a network key.
393 mwifiex_cfg80211_add_key(struct wiphy
*wiphy
, struct net_device
*netdev
,
394 u8 key_index
, bool pairwise
, const u8
*mac_addr
,
395 struct key_params
*params
)
397 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(netdev
);
398 struct mwifiex_wep_key
*wep_key
;
399 const u8 bc_mac
[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
400 const u8
*peer_mac
= pairwise
? mac_addr
: bc_mac
;
402 if (GET_BSS_ROLE(priv
) == MWIFIEX_BSS_ROLE_UAP
&&
403 (params
->cipher
== WLAN_CIPHER_SUITE_WEP40
||
404 params
->cipher
== WLAN_CIPHER_SUITE_WEP104
)) {
405 if (params
->key
&& params
->key_len
) {
406 wep_key
= &priv
->wep_key
[key_index
];
407 memset(wep_key
, 0, sizeof(struct mwifiex_wep_key
));
408 memcpy(wep_key
->key_material
, params
->key
,
410 wep_key
->key_index
= key_index
;
411 wep_key
->key_length
= params
->key_len
;
412 priv
->sec_info
.wep_enabled
= 1;
417 if (mwifiex_set_encode(priv
, params
, params
->key
, params
->key_len
,
418 key_index
, peer_mac
, 0)) {
419 wiphy_err(wiphy
, "crypto keys added\n");
427 * This function sends domain information to the firmware.
429 * The following information are passed to the firmware -
431 * - Sub bands (first channel, number of channels, maximum Tx power)
433 static int mwifiex_send_domain_info_cmd_fw(struct wiphy
*wiphy
)
435 u8 no_of_triplet
= 0;
436 struct ieee80211_country_ie_triplet
*t
;
437 u8 no_of_parsed_chan
= 0;
438 u8 first_chan
= 0, next_chan
= 0, max_pwr
= 0;
440 enum ieee80211_band band
;
441 struct ieee80211_supported_band
*sband
;
442 struct ieee80211_channel
*ch
;
443 struct mwifiex_adapter
*adapter
= mwifiex_cfg80211_get_adapter(wiphy
);
444 struct mwifiex_private
*priv
;
445 struct mwifiex_802_11d_domain_reg
*domain_info
= &adapter
->domain_reg
;
447 /* Set country code */
448 domain_info
->country_code
[0] = adapter
->country_code
[0];
449 domain_info
->country_code
[1] = adapter
->country_code
[1];
450 domain_info
->country_code
[2] = ' ';
452 band
= mwifiex_band_to_radio_type(adapter
->config_bands
);
453 if (!wiphy
->bands
[band
]) {
454 wiphy_err(wiphy
, "11D: setting domain info in FW\n");
458 sband
= wiphy
->bands
[band
];
460 for (i
= 0; i
< sband
->n_channels
; i
++) {
461 ch
= &sband
->channels
[i
];
462 if (ch
->flags
& IEEE80211_CHAN_DISABLED
)
467 first_chan
= (u32
) ch
->hw_value
;
468 next_chan
= first_chan
;
469 max_pwr
= ch
->max_power
;
470 no_of_parsed_chan
= 1;
474 if (ch
->hw_value
== next_chan
+ 1 &&
475 ch
->max_power
== max_pwr
) {
479 t
= &domain_info
->triplet
[no_of_triplet
];
480 t
->chans
.first_channel
= first_chan
;
481 t
->chans
.num_channels
= no_of_parsed_chan
;
482 t
->chans
.max_power
= max_pwr
;
484 first_chan
= (u32
) ch
->hw_value
;
485 next_chan
= first_chan
;
486 max_pwr
= ch
->max_power
;
487 no_of_parsed_chan
= 1;
492 t
= &domain_info
->triplet
[no_of_triplet
];
493 t
->chans
.first_channel
= first_chan
;
494 t
->chans
.num_channels
= no_of_parsed_chan
;
495 t
->chans
.max_power
= max_pwr
;
499 domain_info
->no_of_triplet
= no_of_triplet
;
501 priv
= mwifiex_get_priv(adapter
, MWIFIEX_BSS_ROLE_ANY
);
503 if (mwifiex_send_cmd_async(priv
, HostCmd_CMD_802_11D_DOMAIN_INFO
,
504 HostCmd_ACT_GEN_SET
, 0, NULL
)) {
505 wiphy_err(wiphy
, "11D: setting domain info in FW\n");
513 * CFG802.11 regulatory domain callback function.
515 * This function is called when the regulatory domain is changed due to the
516 * following reasons -
518 * - Set by system core
520 * - Set bt Country IE
522 static int mwifiex_reg_notifier(struct wiphy
*wiphy
,
523 struct regulatory_request
*request
)
525 struct mwifiex_adapter
*adapter
= mwifiex_cfg80211_get_adapter(wiphy
);
527 wiphy_dbg(wiphy
, "info: cfg80211 regulatory domain callback for %c%c\n",
528 request
->alpha2
[0], request
->alpha2
[1]);
530 memcpy(adapter
->country_code
, request
->alpha2
, sizeof(request
->alpha2
));
532 switch (request
->initiator
) {
533 case NL80211_REGDOM_SET_BY_DRIVER
:
534 case NL80211_REGDOM_SET_BY_CORE
:
535 case NL80211_REGDOM_SET_BY_USER
:
537 /* Todo: apply driver specific changes in channel flags based
538 on the request initiator if necessary. */
539 case NL80211_REGDOM_SET_BY_COUNTRY_IE
:
542 mwifiex_send_domain_info_cmd_fw(wiphy
);
548 * This function sets the fragmentation threshold.
550 * The fragmentation threshold value must lie between MWIFIEX_FRAG_MIN_VALUE
551 * and MWIFIEX_FRAG_MAX_VALUE.
554 mwifiex_set_frag(struct mwifiex_private
*priv
, u32 frag_thr
)
556 if (frag_thr
< MWIFIEX_FRAG_MIN_VALUE
||
557 frag_thr
> MWIFIEX_FRAG_MAX_VALUE
)
558 frag_thr
= MWIFIEX_FRAG_MAX_VALUE
;
560 return mwifiex_send_cmd_sync(priv
, HostCmd_CMD_802_11_SNMP_MIB
,
561 HostCmd_ACT_GEN_SET
, FRAG_THRESH_I
,
566 * This function sets the RTS threshold.
568 * The rts value must lie between MWIFIEX_RTS_MIN_VALUE
569 * and MWIFIEX_RTS_MAX_VALUE.
572 mwifiex_set_rts(struct mwifiex_private
*priv
, u32 rts_thr
)
574 if (rts_thr
< MWIFIEX_RTS_MIN_VALUE
|| rts_thr
> MWIFIEX_RTS_MAX_VALUE
)
575 rts_thr
= MWIFIEX_RTS_MAX_VALUE
;
577 return mwifiex_send_cmd_sync(priv
, HostCmd_CMD_802_11_SNMP_MIB
,
578 HostCmd_ACT_GEN_SET
, RTS_THRESH_I
,
583 * CFG802.11 operation handler to set wiphy parameters.
585 * This function can be used to set the RTS threshold and the
586 * Fragmentation threshold of the driver.
589 mwifiex_cfg80211_set_wiphy_params(struct wiphy
*wiphy
, u32 changed
)
591 struct mwifiex_adapter
*adapter
= mwifiex_cfg80211_get_adapter(wiphy
);
592 struct mwifiex_private
*priv
;
593 struct mwifiex_uap_bss_param
*bss_cfg
;
594 int ret
, bss_started
, i
;
596 for (i
= 0; i
< adapter
->priv_num
; i
++) {
597 priv
= adapter
->priv
[i
];
599 switch (priv
->bss_role
) {
600 case MWIFIEX_BSS_ROLE_UAP
:
601 bss_cfg
= kzalloc(sizeof(struct mwifiex_uap_bss_param
),
606 mwifiex_set_sys_config_invalid_data(bss_cfg
);
608 if (changed
& WIPHY_PARAM_RTS_THRESHOLD
)
609 bss_cfg
->rts_threshold
= wiphy
->rts_threshold
;
610 if (changed
& WIPHY_PARAM_FRAG_THRESHOLD
)
611 bss_cfg
->frag_threshold
= wiphy
->frag_threshold
;
612 if (changed
& WIPHY_PARAM_RETRY_LONG
)
613 bss_cfg
->retry_limit
= wiphy
->retry_long
;
615 bss_started
= priv
->bss_started
;
617 ret
= mwifiex_send_cmd_sync(priv
,
618 HostCmd_CMD_UAP_BSS_STOP
,
619 HostCmd_ACT_GEN_SET
, 0,
622 wiphy_err(wiphy
, "Failed to stop the BSS\n");
627 ret
= mwifiex_send_cmd_async(priv
,
628 HostCmd_CMD_UAP_SYS_CONFIG
,
630 UAP_BSS_PARAMS_I
, bss_cfg
);
635 wiphy_err(wiphy
, "Failed to set bss config\n");
642 ret
= mwifiex_send_cmd_async(priv
,
643 HostCmd_CMD_UAP_BSS_START
,
644 HostCmd_ACT_GEN_SET
, 0,
647 wiphy_err(wiphy
, "Failed to start BSS\n");
652 case MWIFIEX_BSS_ROLE_STA
:
653 if (changed
& WIPHY_PARAM_RTS_THRESHOLD
) {
654 ret
= mwifiex_set_rts(priv
,
655 wiphy
->rts_threshold
);
659 if (changed
& WIPHY_PARAM_FRAG_THRESHOLD
) {
660 ret
= mwifiex_set_frag(priv
,
661 wiphy
->frag_threshold
);
673 mwifiex_cfg80211_deinit_p2p(struct mwifiex_private
*priv
)
675 u16 mode
= P2P_MODE_DISABLE
;
677 if (GET_BSS_ROLE(priv
) != MWIFIEX_BSS_ROLE_STA
)
678 mwifiex_set_bss_role(priv
, MWIFIEX_BSS_ROLE_STA
);
680 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_P2P_MODE_CFG
,
681 HostCmd_ACT_GEN_SET
, 0, &mode
))
688 * This function initializes the functionalities for P2P client.
689 * The P2P client initialization sequence is:
690 * disable -> device -> client
693 mwifiex_cfg80211_init_p2p_client(struct mwifiex_private
*priv
)
697 if (mwifiex_cfg80211_deinit_p2p(priv
))
700 mode
= P2P_MODE_DEVICE
;
701 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_P2P_MODE_CFG
,
702 HostCmd_ACT_GEN_SET
, 0, &mode
))
705 mode
= P2P_MODE_CLIENT
;
706 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_P2P_MODE_CFG
,
707 HostCmd_ACT_GEN_SET
, 0, &mode
))
714 * This function initializes the functionalities for P2P GO.
715 * The P2P GO initialization sequence is:
716 * disable -> device -> GO
719 mwifiex_cfg80211_init_p2p_go(struct mwifiex_private
*priv
)
723 if (mwifiex_cfg80211_deinit_p2p(priv
))
726 mode
= P2P_MODE_DEVICE
;
727 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_P2P_MODE_CFG
,
728 HostCmd_ACT_GEN_SET
, 0, &mode
))
732 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_P2P_MODE_CFG
,
733 HostCmd_ACT_GEN_SET
, 0, &mode
))
736 if (GET_BSS_ROLE(priv
) != MWIFIEX_BSS_ROLE_UAP
)
737 mwifiex_set_bss_role(priv
, MWIFIEX_BSS_ROLE_UAP
);
743 * CFG802.11 operation handler to change interface type.
746 mwifiex_cfg80211_change_virtual_intf(struct wiphy
*wiphy
,
747 struct net_device
*dev
,
748 enum nl80211_iftype type
, u32
*flags
,
749 struct vif_params
*params
)
752 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
754 switch (dev
->ieee80211_ptr
->iftype
) {
755 case NL80211_IFTYPE_ADHOC
:
757 case NL80211_IFTYPE_STATION
:
759 case NL80211_IFTYPE_UNSPECIFIED
:
760 wiphy_warn(wiphy
, "%s: kept type as IBSS\n", dev
->name
);
761 case NL80211_IFTYPE_ADHOC
: /* This shouldn't happen */
763 case NL80211_IFTYPE_AP
:
765 wiphy_err(wiphy
, "%s: changing to %d not supported\n",
770 case NL80211_IFTYPE_STATION
:
772 case NL80211_IFTYPE_ADHOC
:
774 case NL80211_IFTYPE_P2P_CLIENT
:
775 if (mwifiex_cfg80211_init_p2p_client(priv
))
777 dev
->ieee80211_ptr
->iftype
= type
;
779 case NL80211_IFTYPE_P2P_GO
:
780 if (mwifiex_cfg80211_init_p2p_go(priv
))
782 dev
->ieee80211_ptr
->iftype
= type
;
784 case NL80211_IFTYPE_UNSPECIFIED
:
785 wiphy_warn(wiphy
, "%s: kept type as STA\n", dev
->name
);
786 case NL80211_IFTYPE_STATION
: /* This shouldn't happen */
788 case NL80211_IFTYPE_AP
:
790 wiphy_err(wiphy
, "%s: changing to %d not supported\n",
795 case NL80211_IFTYPE_AP
:
797 case NL80211_IFTYPE_UNSPECIFIED
:
798 wiphy_warn(wiphy
, "%s: kept type as AP\n", dev
->name
);
799 case NL80211_IFTYPE_AP
: /* This shouldn't happen */
801 case NL80211_IFTYPE_ADHOC
:
802 case NL80211_IFTYPE_STATION
:
804 wiphy_err(wiphy
, "%s: changing to %d not supported\n",
809 case NL80211_IFTYPE_P2P_CLIENT
:
810 case NL80211_IFTYPE_P2P_GO
:
812 case NL80211_IFTYPE_STATION
:
813 if (mwifiex_cfg80211_deinit_p2p(priv
))
815 dev
->ieee80211_ptr
->iftype
= type
;
822 wiphy_err(wiphy
, "%s: unknown iftype: %d\n",
823 dev
->name
, dev
->ieee80211_ptr
->iftype
);
827 dev
->ieee80211_ptr
->iftype
= type
;
828 priv
->bss_mode
= type
;
829 mwifiex_deauthenticate(priv
, NULL
);
831 priv
->sec_info
.authentication_mode
= NL80211_AUTHTYPE_OPEN_SYSTEM
;
833 ret
= mwifiex_send_cmd_sync(priv
, HostCmd_CMD_SET_BSS_MODE
,
834 HostCmd_ACT_GEN_SET
, 0, NULL
);
840 * This function dumps the station information on a buffer.
842 * The following information are shown -
843 * - Total bytes transmitted
844 * - Total bytes received
845 * - Total packets transmitted
846 * - Total packets received
847 * - Signal quality level
848 * - Transmission rate
851 mwifiex_dump_station_info(struct mwifiex_private
*priv
,
852 struct station_info
*sinfo
)
856 sinfo
->filled
= STATION_INFO_RX_BYTES
| STATION_INFO_TX_BYTES
|
857 STATION_INFO_RX_PACKETS
| STATION_INFO_TX_PACKETS
|
858 STATION_INFO_TX_BITRATE
|
859 STATION_INFO_SIGNAL
| STATION_INFO_SIGNAL_AVG
;
861 /* Get signal information from the firmware */
862 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_RSSI_INFO
,
863 HostCmd_ACT_GEN_GET
, 0, NULL
)) {
864 dev_err(priv
->adapter
->dev
, "failed to get signal information\n");
868 if (mwifiex_drv_get_data_rate(priv
, &rate
)) {
869 dev_err(priv
->adapter
->dev
, "getting data rate\n");
873 /* Get DTIM period information from firmware */
874 mwifiex_send_cmd_sync(priv
, HostCmd_CMD_802_11_SNMP_MIB
,
875 HostCmd_ACT_GEN_GET
, DTIM_PERIOD_I
,
879 * Bit 0 in tx_htinfo indicates that current Tx rate is 11n rate. Valid
880 * MCS index values for us are 0 to 15.
882 if ((priv
->tx_htinfo
& BIT(0)) && (priv
->tx_rate
< 16)) {
883 sinfo
->txrate
.mcs
= priv
->tx_rate
;
884 sinfo
->txrate
.flags
|= RATE_INFO_FLAGS_MCS
;
886 if (priv
->tx_htinfo
& BIT(1))
887 sinfo
->txrate
.flags
|= RATE_INFO_FLAGS_40_MHZ_WIDTH
;
889 if (priv
->tx_htinfo
& BIT(2))
890 sinfo
->txrate
.flags
|= RATE_INFO_FLAGS_SHORT_GI
;
893 sinfo
->signal_avg
= priv
->bcn_rssi_avg
;
894 sinfo
->rx_bytes
= priv
->stats
.rx_bytes
;
895 sinfo
->tx_bytes
= priv
->stats
.tx_bytes
;
896 sinfo
->rx_packets
= priv
->stats
.rx_packets
;
897 sinfo
->tx_packets
= priv
->stats
.tx_packets
;
898 sinfo
->signal
= priv
->bcn_rssi_avg
;
899 /* bit rate is in 500 kb/s units. Convert it to 100kb/s units */
900 sinfo
->txrate
.legacy
= rate
* 5;
902 if (priv
->bss_mode
== NL80211_IFTYPE_STATION
) {
903 sinfo
->filled
|= STATION_INFO_BSS_PARAM
;
904 sinfo
->bss_param
.flags
= 0;
905 if (priv
->curr_bss_params
.bss_descriptor
.cap_info_bitmap
&
906 WLAN_CAPABILITY_SHORT_PREAMBLE
)
907 sinfo
->bss_param
.flags
|=
908 BSS_PARAM_FLAGS_SHORT_PREAMBLE
;
909 if (priv
->curr_bss_params
.bss_descriptor
.cap_info_bitmap
&
910 WLAN_CAPABILITY_SHORT_SLOT_TIME
)
911 sinfo
->bss_param
.flags
|=
912 BSS_PARAM_FLAGS_SHORT_SLOT_TIME
;
913 sinfo
->bss_param
.dtim_period
= priv
->dtim_period
;
914 sinfo
->bss_param
.beacon_interval
=
915 priv
->curr_bss_params
.bss_descriptor
.beacon_period
;
922 * CFG802.11 operation handler to get station information.
924 * This function only works in connected mode, and dumps the
925 * requested station information, if available.
928 mwifiex_cfg80211_get_station(struct wiphy
*wiphy
, struct net_device
*dev
,
929 u8
*mac
, struct station_info
*sinfo
)
931 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
933 if (!priv
->media_connected
)
935 if (memcmp(mac
, priv
->cfg_bssid
, ETH_ALEN
))
938 return mwifiex_dump_station_info(priv
, sinfo
);
942 * CFG802.11 operation handler to dump station information.
945 mwifiex_cfg80211_dump_station(struct wiphy
*wiphy
, struct net_device
*dev
,
946 int idx
, u8
*mac
, struct station_info
*sinfo
)
948 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
950 if (!priv
->media_connected
|| idx
)
953 memcpy(mac
, priv
->cfg_bssid
, ETH_ALEN
);
955 return mwifiex_dump_station_info(priv
, sinfo
);
958 /* Supported rates to be advertised to the cfg80211 */
959 static struct ieee80211_rate mwifiex_rates
[] = {
960 {.bitrate
= 10, .hw_value
= 2, },
961 {.bitrate
= 20, .hw_value
= 4, },
962 {.bitrate
= 55, .hw_value
= 11, },
963 {.bitrate
= 110, .hw_value
= 22, },
964 {.bitrate
= 60, .hw_value
= 12, },
965 {.bitrate
= 90, .hw_value
= 18, },
966 {.bitrate
= 120, .hw_value
= 24, },
967 {.bitrate
= 180, .hw_value
= 36, },
968 {.bitrate
= 240, .hw_value
= 48, },
969 {.bitrate
= 360, .hw_value
= 72, },
970 {.bitrate
= 480, .hw_value
= 96, },
971 {.bitrate
= 540, .hw_value
= 108, },
974 /* Channel definitions to be advertised to cfg80211 */
975 static struct ieee80211_channel mwifiex_channels_2ghz
[] = {
976 {.center_freq
= 2412, .hw_value
= 1, },
977 {.center_freq
= 2417, .hw_value
= 2, },
978 {.center_freq
= 2422, .hw_value
= 3, },
979 {.center_freq
= 2427, .hw_value
= 4, },
980 {.center_freq
= 2432, .hw_value
= 5, },
981 {.center_freq
= 2437, .hw_value
= 6, },
982 {.center_freq
= 2442, .hw_value
= 7, },
983 {.center_freq
= 2447, .hw_value
= 8, },
984 {.center_freq
= 2452, .hw_value
= 9, },
985 {.center_freq
= 2457, .hw_value
= 10, },
986 {.center_freq
= 2462, .hw_value
= 11, },
987 {.center_freq
= 2467, .hw_value
= 12, },
988 {.center_freq
= 2472, .hw_value
= 13, },
989 {.center_freq
= 2484, .hw_value
= 14, },
992 static struct ieee80211_supported_band mwifiex_band_2ghz
= {
993 .channels
= mwifiex_channels_2ghz
,
994 .n_channels
= ARRAY_SIZE(mwifiex_channels_2ghz
),
995 .bitrates
= mwifiex_rates
,
996 .n_bitrates
= ARRAY_SIZE(mwifiex_rates
),
999 static struct ieee80211_channel mwifiex_channels_5ghz
[] = {
1000 {.center_freq
= 5040, .hw_value
= 8, },
1001 {.center_freq
= 5060, .hw_value
= 12, },
1002 {.center_freq
= 5080, .hw_value
= 16, },
1003 {.center_freq
= 5170, .hw_value
= 34, },
1004 {.center_freq
= 5190, .hw_value
= 38, },
1005 {.center_freq
= 5210, .hw_value
= 42, },
1006 {.center_freq
= 5230, .hw_value
= 46, },
1007 {.center_freq
= 5180, .hw_value
= 36, },
1008 {.center_freq
= 5200, .hw_value
= 40, },
1009 {.center_freq
= 5220, .hw_value
= 44, },
1010 {.center_freq
= 5240, .hw_value
= 48, },
1011 {.center_freq
= 5260, .hw_value
= 52, },
1012 {.center_freq
= 5280, .hw_value
= 56, },
1013 {.center_freq
= 5300, .hw_value
= 60, },
1014 {.center_freq
= 5320, .hw_value
= 64, },
1015 {.center_freq
= 5500, .hw_value
= 100, },
1016 {.center_freq
= 5520, .hw_value
= 104, },
1017 {.center_freq
= 5540, .hw_value
= 108, },
1018 {.center_freq
= 5560, .hw_value
= 112, },
1019 {.center_freq
= 5580, .hw_value
= 116, },
1020 {.center_freq
= 5600, .hw_value
= 120, },
1021 {.center_freq
= 5620, .hw_value
= 124, },
1022 {.center_freq
= 5640, .hw_value
= 128, },
1023 {.center_freq
= 5660, .hw_value
= 132, },
1024 {.center_freq
= 5680, .hw_value
= 136, },
1025 {.center_freq
= 5700, .hw_value
= 140, },
1026 {.center_freq
= 5745, .hw_value
= 149, },
1027 {.center_freq
= 5765, .hw_value
= 153, },
1028 {.center_freq
= 5785, .hw_value
= 157, },
1029 {.center_freq
= 5805, .hw_value
= 161, },
1030 {.center_freq
= 5825, .hw_value
= 165, },
1033 static struct ieee80211_supported_band mwifiex_band_5ghz
= {
1034 .channels
= mwifiex_channels_5ghz
,
1035 .n_channels
= ARRAY_SIZE(mwifiex_channels_5ghz
),
1036 .bitrates
= mwifiex_rates
+ 4,
1037 .n_bitrates
= ARRAY_SIZE(mwifiex_rates
) - 4,
1041 /* Supported crypto cipher suits to be advertised to cfg80211 */
1042 static const u32 mwifiex_cipher_suites
[] = {
1043 WLAN_CIPHER_SUITE_WEP40
,
1044 WLAN_CIPHER_SUITE_WEP104
,
1045 WLAN_CIPHER_SUITE_TKIP
,
1046 WLAN_CIPHER_SUITE_CCMP
,
1047 WLAN_CIPHER_SUITE_AES_CMAC
,
1050 /* Supported mgmt frame types to be advertised to cfg80211 */
1051 static const struct ieee80211_txrx_stypes
1052 mwifiex_mgmt_stypes
[NUM_NL80211_IFTYPES
] = {
1053 [NL80211_IFTYPE_STATION
] = {
1054 .tx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1055 BIT(IEEE80211_STYPE_PROBE_RESP
>> 4),
1056 .rx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1057 BIT(IEEE80211_STYPE_PROBE_REQ
>> 4),
1059 [NL80211_IFTYPE_AP
] = {
1060 .tx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1061 BIT(IEEE80211_STYPE_PROBE_RESP
>> 4),
1062 .rx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1063 BIT(IEEE80211_STYPE_PROBE_REQ
>> 4),
1065 [NL80211_IFTYPE_P2P_CLIENT
] = {
1066 .tx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1067 BIT(IEEE80211_STYPE_PROBE_RESP
>> 4),
1068 .rx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1069 BIT(IEEE80211_STYPE_PROBE_REQ
>> 4),
1071 [NL80211_IFTYPE_P2P_GO
] = {
1072 .tx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1073 BIT(IEEE80211_STYPE_PROBE_RESP
>> 4),
1074 .rx
= BIT(IEEE80211_STYPE_ACTION
>> 4) |
1075 BIT(IEEE80211_STYPE_PROBE_REQ
>> 4),
1080 * CFG802.11 operation handler for setting bit rates.
1082 * Function configures data rates to firmware using bitrate mask
1083 * provided by cfg80211.
1085 static int mwifiex_cfg80211_set_bitrate_mask(struct wiphy
*wiphy
,
1086 struct net_device
*dev
,
1088 const struct cfg80211_bitrate_mask
*mask
)
1090 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1091 u16 bitmap_rates
[MAX_BITMAP_RATES_SIZE
];
1092 enum ieee80211_band band
;
1094 if (!priv
->media_connected
) {
1095 dev_err(priv
->adapter
->dev
,
1096 "Can not set Tx data rate in disconnected state\n");
1100 band
= mwifiex_band_to_radio_type(priv
->curr_bss_params
.band
);
1102 memset(bitmap_rates
, 0, sizeof(bitmap_rates
));
1104 /* Fill HR/DSSS rates. */
1105 if (band
== IEEE80211_BAND_2GHZ
)
1106 bitmap_rates
[0] = mask
->control
[band
].legacy
& 0x000f;
1108 /* Fill OFDM rates */
1109 if (band
== IEEE80211_BAND_2GHZ
)
1110 bitmap_rates
[1] = (mask
->control
[band
].legacy
& 0x0ff0) >> 4;
1112 bitmap_rates
[1] = mask
->control
[band
].legacy
;
1114 /* Fill MCS rates */
1115 bitmap_rates
[2] = mask
->control
[band
].mcs
[0];
1116 if (priv
->adapter
->hw_dev_mcs_support
== HT_STREAM_2X2
)
1117 bitmap_rates
[2] |= mask
->control
[band
].mcs
[1] << 8;
1119 return mwifiex_send_cmd_sync(priv
, HostCmd_CMD_TX_RATE_CFG
,
1120 HostCmd_ACT_GEN_SET
, 0, bitmap_rates
);
1124 * CFG802.11 operation handler for connection quality monitoring.
1126 * This function subscribes/unsubscribes HIGH_RSSI and LOW_RSSI
1129 static int mwifiex_cfg80211_set_cqm_rssi_config(struct wiphy
*wiphy
,
1130 struct net_device
*dev
,
1131 s32 rssi_thold
, u32 rssi_hyst
)
1133 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1134 struct mwifiex_ds_misc_subsc_evt subsc_evt
;
1136 priv
->cqm_rssi_thold
= rssi_thold
;
1137 priv
->cqm_rssi_hyst
= rssi_hyst
;
1139 memset(&subsc_evt
, 0x00, sizeof(struct mwifiex_ds_misc_subsc_evt
));
1140 subsc_evt
.events
= BITMASK_BCN_RSSI_LOW
| BITMASK_BCN_RSSI_HIGH
;
1142 /* Subscribe/unsubscribe low and high rssi events */
1143 if (rssi_thold
&& rssi_hyst
) {
1144 subsc_evt
.action
= HostCmd_ACT_BITWISE_SET
;
1145 subsc_evt
.bcn_l_rssi_cfg
.abs_value
= abs(rssi_thold
);
1146 subsc_evt
.bcn_h_rssi_cfg
.abs_value
= abs(rssi_thold
);
1147 subsc_evt
.bcn_l_rssi_cfg
.evt_freq
= 1;
1148 subsc_evt
.bcn_h_rssi_cfg
.evt_freq
= 1;
1149 return mwifiex_send_cmd_sync(priv
,
1150 HostCmd_CMD_802_11_SUBSCRIBE_EVENT
,
1153 subsc_evt
.action
= HostCmd_ACT_BITWISE_CLR
;
1154 return mwifiex_send_cmd_sync(priv
,
1155 HostCmd_CMD_802_11_SUBSCRIBE_EVENT
,
1162 /* cfg80211 operation handler for change_beacon.
1163 * Function retrieves and sets modified management IEs to FW.
1165 static int mwifiex_cfg80211_change_beacon(struct wiphy
*wiphy
,
1166 struct net_device
*dev
,
1167 struct cfg80211_beacon_data
*data
)
1169 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1171 if (GET_BSS_ROLE(priv
) != MWIFIEX_BSS_ROLE_UAP
) {
1172 wiphy_err(wiphy
, "%s: bss_type mismatched\n", __func__
);
1176 if (!priv
->bss_started
) {
1177 wiphy_err(wiphy
, "%s: bss not started\n", __func__
);
1181 if (mwifiex_set_mgmt_ies(priv
, data
)) {
1182 wiphy_err(wiphy
, "%s: setting mgmt ies failed\n", __func__
);
1190 mwifiex_cfg80211_set_antenna(struct wiphy
*wiphy
, u32 tx_ant
, u32 rx_ant
)
1192 struct mwifiex_adapter
*adapter
= mwifiex_cfg80211_get_adapter(wiphy
);
1193 struct mwifiex_private
*priv
= mwifiex_get_priv(adapter
,
1194 MWIFIEX_BSS_ROLE_ANY
);
1195 struct mwifiex_ds_ant_cfg ant_cfg
;
1197 if (!tx_ant
|| !rx_ant
)
1200 if (adapter
->hw_dev_mcs_support
!= HT_STREAM_2X2
) {
1201 /* Not a MIMO chip. User should provide specific antenna number
1202 * for Tx/Rx path or enable all antennas for diversity
1204 if (tx_ant
!= rx_ant
)
1207 if ((tx_ant
& (tx_ant
- 1)) &&
1208 (tx_ant
!= BIT(adapter
->number_of_antenna
) - 1))
1211 if ((tx_ant
== BIT(adapter
->number_of_antenna
) - 1) &&
1212 (priv
->adapter
->number_of_antenna
> 1)) {
1213 tx_ant
= RF_ANTENNA_AUTO
;
1214 rx_ant
= RF_ANTENNA_AUTO
;
1218 ant_cfg
.tx_ant
= tx_ant
;
1219 ant_cfg
.rx_ant
= rx_ant
;
1221 return mwifiex_send_cmd_sync(priv
, HostCmd_CMD_RF_ANTENNA
,
1222 HostCmd_ACT_GEN_SET
, 0, &ant_cfg
);
1225 /* cfg80211 operation handler for stop ap.
1226 * Function stops BSS running at uAP interface.
1228 static int mwifiex_cfg80211_stop_ap(struct wiphy
*wiphy
, struct net_device
*dev
)
1230 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1232 if (mwifiex_del_mgmt_ies(priv
))
1233 wiphy_err(wiphy
, "Failed to delete mgmt IEs!\n");
1235 priv
->ap_11n_enabled
= 0;
1237 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_UAP_BSS_STOP
,
1238 HostCmd_ACT_GEN_SET
, 0, NULL
)) {
1239 wiphy_err(wiphy
, "Failed to stop the BSS\n");
1246 /* cfg80211 operation handler for start_ap.
1247 * Function sets beacon period, DTIM period, SSID and security into
1248 * AP config structure.
1249 * AP is configured with these settings and BSS is started.
1251 static int mwifiex_cfg80211_start_ap(struct wiphy
*wiphy
,
1252 struct net_device
*dev
,
1253 struct cfg80211_ap_settings
*params
)
1255 struct mwifiex_uap_bss_param
*bss_cfg
;
1256 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1257 u8 config_bands
= 0;
1259 if (GET_BSS_ROLE(priv
) != MWIFIEX_BSS_ROLE_UAP
)
1261 if (mwifiex_set_mgmt_ies(priv
, ¶ms
->beacon
))
1264 bss_cfg
= kzalloc(sizeof(struct mwifiex_uap_bss_param
), GFP_KERNEL
);
1268 mwifiex_set_sys_config_invalid_data(bss_cfg
);
1270 if (params
->beacon_interval
)
1271 bss_cfg
->beacon_period
= params
->beacon_interval
;
1272 if (params
->dtim_period
)
1273 bss_cfg
->dtim_period
= params
->dtim_period
;
1275 if (params
->ssid
&& params
->ssid_len
) {
1276 memcpy(bss_cfg
->ssid
.ssid
, params
->ssid
, params
->ssid_len
);
1277 bss_cfg
->ssid
.ssid_len
= params
->ssid_len
;
1280 switch (params
->hidden_ssid
) {
1281 case NL80211_HIDDEN_SSID_NOT_IN_USE
:
1282 bss_cfg
->bcast_ssid_ctl
= 1;
1284 case NL80211_HIDDEN_SSID_ZERO_LEN
:
1285 bss_cfg
->bcast_ssid_ctl
= 0;
1287 case NL80211_HIDDEN_SSID_ZERO_CONTENTS
:
1288 /* firmware doesn't support this type of hidden SSID */
1294 bss_cfg
->channel
= ieee80211_frequency_to_channel(
1295 params
->chandef
.chan
->center_freq
);
1297 /* Set appropriate bands */
1298 if (params
->chandef
.chan
->band
== IEEE80211_BAND_2GHZ
) {
1299 bss_cfg
->band_cfg
= BAND_CONFIG_BG
;
1301 if (cfg80211_get_chandef_type(¶ms
->chandef
) ==
1303 config_bands
= BAND_B
| BAND_G
;
1305 config_bands
= BAND_B
| BAND_G
| BAND_GN
;
1307 bss_cfg
->band_cfg
= BAND_CONFIG_A
;
1309 if (cfg80211_get_chandef_type(¶ms
->chandef
) ==
1311 config_bands
= BAND_A
;
1313 config_bands
= BAND_AN
| BAND_A
;
1316 if (!((config_bands
| priv
->adapter
->fw_bands
) &
1317 ~priv
->adapter
->fw_bands
))
1318 priv
->adapter
->config_bands
= config_bands
;
1320 mwifiex_set_uap_rates(bss_cfg
, params
);
1321 mwifiex_send_domain_info_cmd_fw(wiphy
);
1323 if (mwifiex_set_secure_params(priv
, bss_cfg
, params
)) {
1325 wiphy_err(wiphy
, "Failed to parse secuirty parameters!\n");
1329 mwifiex_set_ht_params(priv
, bss_cfg
, params
);
1331 if (params
->inactivity_timeout
> 0) {
1332 /* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */
1333 bss_cfg
->sta_ao_timer
= 10 * params
->inactivity_timeout
;
1334 bss_cfg
->ps_sta_ao_timer
= 10 * params
->inactivity_timeout
;
1337 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_UAP_BSS_STOP
,
1338 HostCmd_ACT_GEN_SET
, 0, NULL
)) {
1339 wiphy_err(wiphy
, "Failed to stop the BSS\n");
1344 if (mwifiex_send_cmd_async(priv
, HostCmd_CMD_UAP_SYS_CONFIG
,
1345 HostCmd_ACT_GEN_SET
,
1346 UAP_BSS_PARAMS_I
, bss_cfg
)) {
1347 wiphy_err(wiphy
, "Failed to set the SSID\n");
1354 if (mwifiex_send_cmd_async(priv
, HostCmd_CMD_UAP_BSS_START
,
1355 HostCmd_ACT_GEN_SET
, 0, NULL
)) {
1356 wiphy_err(wiphy
, "Failed to start the BSS\n");
1360 if (priv
->sec_info
.wep_enabled
)
1361 priv
->curr_pkt_filter
|= HostCmd_ACT_MAC_WEP_ENABLE
;
1363 priv
->curr_pkt_filter
&= ~HostCmd_ACT_MAC_WEP_ENABLE
;
1365 if (mwifiex_send_cmd_sync(priv
, HostCmd_CMD_MAC_CONTROL
,
1366 HostCmd_ACT_GEN_SET
, 0,
1367 &priv
->curr_pkt_filter
))
1374 * CFG802.11 operation handler for disconnection request.
1376 * This function does not work when there is already a disconnection
1377 * procedure going on.
1380 mwifiex_cfg80211_disconnect(struct wiphy
*wiphy
, struct net_device
*dev
,
1383 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1385 if (mwifiex_deauthenticate(priv
, NULL
))
1388 wiphy_dbg(wiphy
, "info: successfully disconnected from %pM:"
1389 " reason code %d\n", priv
->cfg_bssid
, reason_code
);
1391 memset(priv
->cfg_bssid
, 0, ETH_ALEN
);
1397 * This function informs the CFG802.11 subsystem of a new IBSS.
1399 * The following information are sent to the CFG802.11 subsystem
1400 * to register the new IBSS. If we do not register the new IBSS,
1401 * a kernel panic will result.
1407 static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private
*priv
)
1409 struct ieee80211_channel
*chan
;
1410 struct mwifiex_bss_info bss_info
;
1411 struct cfg80211_bss
*bss
;
1413 u8 ie_buf
[IEEE80211_MAX_SSID_LEN
+ sizeof(struct ieee_types_header
)];
1414 enum ieee80211_band band
;
1416 if (mwifiex_get_bss_info(priv
, &bss_info
))
1419 ie_buf
[0] = WLAN_EID_SSID
;
1420 ie_buf
[1] = bss_info
.ssid
.ssid_len
;
1422 memcpy(&ie_buf
[sizeof(struct ieee_types_header
)],
1423 &bss_info
.ssid
.ssid
, bss_info
.ssid
.ssid_len
);
1424 ie_len
= ie_buf
[1] + sizeof(struct ieee_types_header
);
1426 band
= mwifiex_band_to_radio_type(priv
->curr_bss_params
.band
);
1427 chan
= __ieee80211_get_channel(priv
->wdev
->wiphy
,
1428 ieee80211_channel_to_frequency(bss_info
.bss_chan
,
1431 bss
= cfg80211_inform_bss(priv
->wdev
->wiphy
, chan
,
1432 bss_info
.bssid
, 0, WLAN_CAPABILITY_IBSS
,
1433 0, ie_buf
, ie_len
, 0, GFP_KERNEL
);
1434 cfg80211_put_bss(bss
);
1435 memcpy(priv
->cfg_bssid
, bss_info
.bssid
, ETH_ALEN
);
1441 * This function connects with a BSS.
1443 * This function handles both Infra and Ad-Hoc modes. It also performs
1444 * validity checking on the provided parameters, disconnects from the
1445 * current BSS (if any), sets up the association/scan parameters,
1446 * including security settings, and performs specific SSID scan before
1447 * trying to connect.
1449 * For Infra mode, the function returns failure if the specified SSID
1450 * is not found in scan table. However, for Ad-Hoc mode, it can create
1451 * the IBSS if it does not exist. On successful completion in either case,
1452 * the function notifies the CFG802.11 subsystem of the new BSS connection.
1455 mwifiex_cfg80211_assoc(struct mwifiex_private
*priv
, size_t ssid_len
, u8
*ssid
,
1456 u8
*bssid
, int mode
, struct ieee80211_channel
*channel
,
1457 struct cfg80211_connect_params
*sme
, bool privacy
)
1459 struct cfg80211_ssid req_ssid
;
1460 int ret
, auth_type
= 0;
1461 struct cfg80211_bss
*bss
= NULL
;
1462 u8 is_scanning_required
= 0, config_bands
= 0;
1464 memset(&req_ssid
, 0, sizeof(struct cfg80211_ssid
));
1466 req_ssid
.ssid_len
= ssid_len
;
1467 if (ssid_len
> IEEE80211_MAX_SSID_LEN
) {
1468 dev_err(priv
->adapter
->dev
, "invalid SSID - aborting\n");
1472 memcpy(req_ssid
.ssid
, ssid
, ssid_len
);
1473 if (!req_ssid
.ssid_len
|| req_ssid
.ssid
[0] < 0x20) {
1474 dev_err(priv
->adapter
->dev
, "invalid SSID - aborting\n");
1478 /* disconnect before try to associate */
1479 mwifiex_deauthenticate(priv
, NULL
);
1482 if (mode
== NL80211_IFTYPE_STATION
) {
1483 if (channel
->band
== IEEE80211_BAND_2GHZ
)
1484 config_bands
= BAND_B
| BAND_G
| BAND_GN
;
1486 config_bands
= BAND_A
| BAND_AN
;
1488 if (!((config_bands
| priv
->adapter
->fw_bands
) &
1489 ~priv
->adapter
->fw_bands
))
1490 priv
->adapter
->config_bands
= config_bands
;
1494 /* As this is new association, clear locally stored
1495 * keys and security related flags */
1496 priv
->sec_info
.wpa_enabled
= false;
1497 priv
->sec_info
.wpa2_enabled
= false;
1498 priv
->wep_key_curr_index
= 0;
1499 priv
->sec_info
.encryption_mode
= 0;
1500 priv
->sec_info
.is_authtype_auto
= 0;
1501 ret
= mwifiex_set_encode(priv
, NULL
, NULL
, 0, 0, NULL
, 1);
1503 if (mode
== NL80211_IFTYPE_ADHOC
) {
1504 /* "privacy" is set only for ad-hoc mode */
1507 * Keep WLAN_CIPHER_SUITE_WEP104 for now so that
1508 * the firmware can find a matching network from the
1509 * scan. The cfg80211 does not give us the encryption
1510 * mode at this stage so just setting it to WEP here.
1512 priv
->sec_info
.encryption_mode
=
1513 WLAN_CIPHER_SUITE_WEP104
;
1514 priv
->sec_info
.authentication_mode
=
1515 NL80211_AUTHTYPE_OPEN_SYSTEM
;
1521 /* Now handle infra mode. "sme" is valid for infra mode only */
1522 if (sme
->auth_type
== NL80211_AUTHTYPE_AUTOMATIC
) {
1523 auth_type
= NL80211_AUTHTYPE_OPEN_SYSTEM
;
1524 priv
->sec_info
.is_authtype_auto
= 1;
1526 auth_type
= sme
->auth_type
;
1529 if (sme
->crypto
.n_ciphers_pairwise
) {
1530 priv
->sec_info
.encryption_mode
=
1531 sme
->crypto
.ciphers_pairwise
[0];
1532 priv
->sec_info
.authentication_mode
= auth_type
;
1535 if (sme
->crypto
.cipher_group
) {
1536 priv
->sec_info
.encryption_mode
= sme
->crypto
.cipher_group
;
1537 priv
->sec_info
.authentication_mode
= auth_type
;
1540 ret
= mwifiex_set_gen_ie(priv
, sme
->ie
, sme
->ie_len
);
1543 if (mwifiex_is_alg_wep(priv
->sec_info
.encryption_mode
)) {
1544 dev_dbg(priv
->adapter
->dev
,
1545 "info: setting wep encryption"
1546 " with key len %d\n", sme
->key_len
);
1547 priv
->wep_key_curr_index
= sme
->key_idx
;
1548 ret
= mwifiex_set_encode(priv
, NULL
, sme
->key
,
1549 sme
->key_len
, sme
->key_idx
,
1555 * Scan entries are valid for some time (15 sec). So we can save one
1556 * active scan time if we just try cfg80211_get_bss first. If it fails
1557 * then request scan and cfg80211_get_bss() again for final output.
1560 if (is_scanning_required
) {
1561 /* Do specific SSID scanning */
1562 if (mwifiex_request_scan(priv
, &req_ssid
)) {
1563 dev_err(priv
->adapter
->dev
, "scan error\n");
1568 /* Find the BSS we want using available scan results */
1569 if (mode
== NL80211_IFTYPE_ADHOC
)
1570 bss
= cfg80211_get_bss(priv
->wdev
->wiphy
, channel
,
1571 bssid
, ssid
, ssid_len
,
1572 WLAN_CAPABILITY_IBSS
,
1573 WLAN_CAPABILITY_IBSS
);
1575 bss
= cfg80211_get_bss(priv
->wdev
->wiphy
, channel
,
1576 bssid
, ssid
, ssid_len
,
1577 WLAN_CAPABILITY_ESS
,
1578 WLAN_CAPABILITY_ESS
);
1581 if (is_scanning_required
) {
1582 dev_warn(priv
->adapter
->dev
,
1583 "assoc: requested bss not found in scan results\n");
1586 is_scanning_required
= 1;
1588 dev_dbg(priv
->adapter
->dev
,
1589 "info: trying to associate to '%s' bssid %pM\n",
1590 (char *) req_ssid
.ssid
, bss
->bssid
);
1591 memcpy(&priv
->cfg_bssid
, bss
->bssid
, ETH_ALEN
);
1596 ret
= mwifiex_bss_start(priv
, bss
, &req_ssid
);
1600 if (mode
== NL80211_IFTYPE_ADHOC
) {
1601 /* Inform the BSS information to kernel, otherwise
1602 * kernel will give a panic after successful assoc */
1603 if (mwifiex_cfg80211_inform_ibss_bss(priv
))
1611 * CFG802.11 operation handler for association request.
1613 * This function does not work when the current mode is set to Ad-Hoc, or
1614 * when there is already an association procedure going on. The given BSS
1615 * information is used to associate.
1618 mwifiex_cfg80211_connect(struct wiphy
*wiphy
, struct net_device
*dev
,
1619 struct cfg80211_connect_params
*sme
)
1621 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1624 if (priv
->bss_mode
== NL80211_IFTYPE_ADHOC
) {
1625 wiphy_err(wiphy
, "received infra assoc request "
1626 "when station is in ibss mode\n");
1630 if (priv
->bss_mode
== NL80211_IFTYPE_AP
) {
1631 wiphy_err(wiphy
, "skip association request for AP interface\n");
1635 wiphy_dbg(wiphy
, "info: Trying to associate to %s and bssid %pM\n",
1636 (char *) sme
->ssid
, sme
->bssid
);
1638 ret
= mwifiex_cfg80211_assoc(priv
, sme
->ssid_len
, sme
->ssid
, sme
->bssid
,
1639 priv
->bss_mode
, sme
->channel
, sme
, 0);
1642 cfg80211_connect_result(priv
->netdev
, priv
->cfg_bssid
, NULL
, 0,
1643 NULL
, 0, WLAN_STATUS_SUCCESS
,
1645 dev_dbg(priv
->adapter
->dev
,
1646 "info: associated to bssid %pM successfully\n",
1649 dev_dbg(priv
->adapter
->dev
,
1650 "info: association to bssid %pM failed\n",
1652 memset(priv
->cfg_bssid
, 0, ETH_ALEN
);
1655 cfg80211_connect_result(priv
->netdev
, priv
->cfg_bssid
,
1656 NULL
, 0, NULL
, 0, ret
,
1659 cfg80211_connect_result(priv
->netdev
, priv
->cfg_bssid
,
1661 WLAN_STATUS_UNSPECIFIED_FAILURE
,
1669 * This function sets following parameters for ibss network.
1673 * - secondary channel offset
1675 static int mwifiex_set_ibss_params(struct mwifiex_private
*priv
,
1676 struct cfg80211_ibss_params
*params
)
1678 struct wiphy
*wiphy
= priv
->wdev
->wiphy
;
1679 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1681 u8 config_bands
= 0;
1683 if (params
->chandef
.chan
->band
== IEEE80211_BAND_2GHZ
) {
1684 if (!params
->basic_rates
) {
1685 config_bands
= BAND_B
| BAND_G
;
1687 for (i
= 0; i
< mwifiex_band_2ghz
.n_bitrates
; i
++) {
1689 * Rates below 6 Mbps in the table are CCK
1690 * rates; 802.11b and from 6 they are OFDM;
1693 if (mwifiex_rates
[i
].bitrate
== 60) {
1699 if (params
->basic_rates
< index
) {
1700 config_bands
= BAND_B
;
1702 config_bands
= BAND_G
;
1703 if (params
->basic_rates
% index
)
1704 config_bands
|= BAND_B
;
1708 if (cfg80211_get_chandef_type(¶ms
->chandef
) !=
1710 config_bands
|= BAND_GN
;
1712 if (cfg80211_get_chandef_type(¶ms
->chandef
) !=
1714 config_bands
= BAND_A
;
1716 config_bands
= BAND_AN
| BAND_A
;
1719 if (!((config_bands
| adapter
->fw_bands
) & ~adapter
->fw_bands
)) {
1720 adapter
->config_bands
= config_bands
;
1721 adapter
->adhoc_start_band
= config_bands
;
1723 if ((config_bands
& BAND_GN
) || (config_bands
& BAND_AN
))
1724 adapter
->adhoc_11n_enabled
= true;
1726 adapter
->adhoc_11n_enabled
= false;
1729 adapter
->sec_chan_offset
=
1730 mwifiex_chan_type_to_sec_chan_offset(
1731 cfg80211_get_chandef_type(¶ms
->chandef
));
1732 priv
->adhoc_channel
= ieee80211_frequency_to_channel(
1733 params
->chandef
.chan
->center_freq
);
1735 wiphy_dbg(wiphy
, "info: set ibss band %d, chan %d, chan offset %d\n",
1736 config_bands
, priv
->adhoc_channel
, adapter
->sec_chan_offset
);
1742 * CFG802.11 operation handler to join an IBSS.
1744 * This function does not work in any mode other than Ad-Hoc, or if
1745 * a join operation is already in progress.
1748 mwifiex_cfg80211_join_ibss(struct wiphy
*wiphy
, struct net_device
*dev
,
1749 struct cfg80211_ibss_params
*params
)
1751 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1754 if (priv
->bss_mode
!= NL80211_IFTYPE_ADHOC
) {
1755 wiphy_err(wiphy
, "request to join ibss received "
1756 "when station is not in ibss mode\n");
1760 wiphy_dbg(wiphy
, "info: trying to join to %s and bssid %pM\n",
1761 (char *) params
->ssid
, params
->bssid
);
1763 mwifiex_set_ibss_params(priv
, params
);
1765 ret
= mwifiex_cfg80211_assoc(priv
, params
->ssid_len
, params
->ssid
,
1766 params
->bssid
, priv
->bss_mode
,
1767 params
->chandef
.chan
, NULL
,
1771 cfg80211_ibss_joined(priv
->netdev
, priv
->cfg_bssid
, GFP_KERNEL
);
1772 dev_dbg(priv
->adapter
->dev
,
1773 "info: joined/created adhoc network with bssid"
1774 " %pM successfully\n", priv
->cfg_bssid
);
1776 dev_dbg(priv
->adapter
->dev
,
1777 "info: failed creating/joining adhoc network\n");
1784 * CFG802.11 operation handler to leave an IBSS.
1786 * This function does not work if a leave operation is
1787 * already in progress.
1790 mwifiex_cfg80211_leave_ibss(struct wiphy
*wiphy
, struct net_device
*dev
)
1792 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1794 wiphy_dbg(wiphy
, "info: disconnecting from essid %pM\n",
1796 if (mwifiex_deauthenticate(priv
, NULL
))
1799 memset(priv
->cfg_bssid
, 0, ETH_ALEN
);
1805 * CFG802.11 operation handler for scan request.
1807 * This function issues a scan request to the firmware based upon
1808 * the user specified scan configuration. On successfull completion,
1809 * it also informs the results.
1812 mwifiex_cfg80211_scan(struct wiphy
*wiphy
,
1813 struct cfg80211_scan_request
*request
)
1815 struct net_device
*dev
= request
->wdev
->netdev
;
1816 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(dev
);
1818 struct ieee80211_channel
*chan
;
1819 struct ieee_types_header
*ie
;
1821 wiphy_dbg(wiphy
, "info: received scan request on %s\n", dev
->name
);
1823 if ((request
->flags
& NL80211_SCAN_FLAG_LOW_PRIORITY
) &&
1824 atomic_read(&priv
->wmm
.tx_pkts_queued
) >=
1825 MWIFIEX_MIN_TX_PENDING_TO_CANCEL_SCAN
) {
1826 dev_dbg(priv
->adapter
->dev
, "scan rejected due to traffic\n");
1830 if (priv
->user_scan_cfg
) {
1831 dev_err(priv
->adapter
->dev
, "cmd: Scan already in process..\n");
1835 priv
->user_scan_cfg
= kzalloc(sizeof(struct mwifiex_user_scan_cfg
),
1837 if (!priv
->user_scan_cfg
) {
1838 dev_err(priv
->adapter
->dev
, "failed to alloc scan_req\n");
1842 priv
->scan_request
= request
;
1844 priv
->user_scan_cfg
->num_ssids
= request
->n_ssids
;
1845 priv
->user_scan_cfg
->ssid_list
= request
->ssids
;
1847 if (request
->ie
&& request
->ie_len
) {
1849 for (i
= 0; i
< MWIFIEX_MAX_VSIE_NUM
; i
++) {
1850 if (priv
->vs_ie
[i
].mask
!= MWIFIEX_VSIE_MASK_CLEAR
)
1852 priv
->vs_ie
[i
].mask
= MWIFIEX_VSIE_MASK_SCAN
;
1853 ie
= (struct ieee_types_header
*)(request
->ie
+ offset
);
1854 memcpy(&priv
->vs_ie
[i
].ie
, ie
, sizeof(*ie
) + ie
->len
);
1855 offset
+= sizeof(*ie
) + ie
->len
;
1857 if (offset
>= request
->ie_len
)
1862 for (i
= 0; i
< request
->n_channels
; i
++) {
1863 chan
= request
->channels
[i
];
1864 priv
->user_scan_cfg
->chan_list
[i
].chan_number
= chan
->hw_value
;
1865 priv
->user_scan_cfg
->chan_list
[i
].radio_type
= chan
->band
;
1867 if (chan
->flags
& IEEE80211_CHAN_PASSIVE_SCAN
)
1868 priv
->user_scan_cfg
->chan_list
[i
].scan_type
=
1869 MWIFIEX_SCAN_TYPE_PASSIVE
;
1871 priv
->user_scan_cfg
->chan_list
[i
].scan_type
=
1872 MWIFIEX_SCAN_TYPE_ACTIVE
;
1874 priv
->user_scan_cfg
->chan_list
[i
].scan_time
= 0;
1877 ret
= mwifiex_scan_networks(priv
, priv
->user_scan_cfg
);
1879 dev_err(priv
->adapter
->dev
, "scan failed: %d\n", ret
);
1880 priv
->scan_request
= NULL
;
1881 kfree(priv
->user_scan_cfg
);
1882 priv
->user_scan_cfg
= NULL
;
1886 if (request
->ie
&& request
->ie_len
) {
1887 for (i
= 0; i
< MWIFIEX_MAX_VSIE_NUM
; i
++) {
1888 if (priv
->vs_ie
[i
].mask
== MWIFIEX_VSIE_MASK_SCAN
) {
1889 priv
->vs_ie
[i
].mask
= MWIFIEX_VSIE_MASK_CLEAR
;
1890 memset(&priv
->vs_ie
[i
].ie
, 0,
1891 MWIFIEX_MAX_VSIE_LEN
);
1899 * This function sets up the CFG802.11 specific HT capability fields
1900 * with default values.
1902 * The following default values are set -
1903 * - HT Supported = True
1904 * - Maximum AMPDU length factor = IEEE80211_HT_MAX_AMPDU_64K
1905 * - Minimum AMPDU spacing = IEEE80211_HT_MPDU_DENSITY_NONE
1906 * - HT Capabilities supported by firmware
1907 * - MCS information, Rx mask = 0xff
1908 * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01)
1911 mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap
*ht_info
,
1912 struct mwifiex_private
*priv
)
1915 struct ieee80211_mcs_info mcs_set
;
1916 u8
*mcs
= (u8
*)&mcs_set
;
1917 struct mwifiex_adapter
*adapter
= priv
->adapter
;
1919 ht_info
->ht_supported
= true;
1920 ht_info
->ampdu_factor
= IEEE80211_HT_MAX_AMPDU_64K
;
1921 ht_info
->ampdu_density
= IEEE80211_HT_MPDU_DENSITY_NONE
;
1923 memset(&ht_info
->mcs
, 0, sizeof(ht_info
->mcs
));
1925 /* Fill HT capability information */
1926 if (ISSUPP_CHANWIDTH40(adapter
->hw_dot_11n_dev_cap
))
1927 ht_info
->cap
|= IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
1929 ht_info
->cap
&= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40
;
1931 if (ISSUPP_SHORTGI20(adapter
->hw_dot_11n_dev_cap
))
1932 ht_info
->cap
|= IEEE80211_HT_CAP_SGI_20
;
1934 ht_info
->cap
&= ~IEEE80211_HT_CAP_SGI_20
;
1936 if (ISSUPP_SHORTGI40(adapter
->hw_dot_11n_dev_cap
))
1937 ht_info
->cap
|= IEEE80211_HT_CAP_SGI_40
;
1939 ht_info
->cap
&= ~IEEE80211_HT_CAP_SGI_40
;
1941 if (ISSUPP_RXSTBC(adapter
->hw_dot_11n_dev_cap
))
1942 ht_info
->cap
|= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT
;
1944 ht_info
->cap
&= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT
);
1946 if (ISSUPP_TXSTBC(adapter
->hw_dot_11n_dev_cap
))
1947 ht_info
->cap
|= IEEE80211_HT_CAP_TX_STBC
;
1949 ht_info
->cap
&= ~IEEE80211_HT_CAP_TX_STBC
;
1951 if (ISSUPP_GREENFIELD(adapter
->hw_dot_11n_dev_cap
))
1952 ht_info
->cap
|= IEEE80211_HT_CAP_GRN_FLD
;
1954 ht_info
->cap
&= ~IEEE80211_HT_CAP_GRN_FLD
;
1956 if (ISENABLED_40MHZ_INTOLERANT(adapter
->hw_dot_11n_dev_cap
))
1957 ht_info
->cap
|= IEEE80211_HT_CAP_40MHZ_INTOLERANT
;
1959 ht_info
->cap
&= ~IEEE80211_HT_CAP_40MHZ_INTOLERANT
;
1961 if (ISSUPP_RXLDPC(adapter
->hw_dot_11n_dev_cap
))
1962 ht_info
->cap
|= IEEE80211_HT_CAP_LDPC_CODING
;
1964 ht_info
->cap
&= ~IEEE80211_HT_CAP_LDPC_CODING
;
1966 ht_info
->cap
&= ~IEEE80211_HT_CAP_MAX_AMSDU
;
1967 ht_info
->cap
|= IEEE80211_HT_CAP_SM_PS
;
1969 rx_mcs_supp
= GET_RXMCSSUPP(adapter
->hw_dev_mcs_support
);
1970 /* Set MCS for 1x1 */
1971 memset(mcs
, 0xff, rx_mcs_supp
);
1972 /* Clear all the other values */
1973 memset(&mcs
[rx_mcs_supp
], 0,
1974 sizeof(struct ieee80211_mcs_info
) - rx_mcs_supp
);
1975 if (priv
->bss_mode
== NL80211_IFTYPE_STATION
||
1976 ISSUPP_CHANWIDTH40(adapter
->hw_dot_11n_dev_cap
))
1977 /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */
1978 SETHT_MCS32(mcs_set
.rx_mask
);
1980 memcpy((u8
*) &ht_info
->mcs
, mcs
, sizeof(struct ieee80211_mcs_info
));
1982 ht_info
->mcs
.tx_params
= IEEE80211_HT_MCS_TX_DEFINED
;
1986 * create a new virtual interface with the given name
1988 struct wireless_dev
*mwifiex_add_virtual_intf(struct wiphy
*wiphy
,
1990 enum nl80211_iftype type
,
1992 struct vif_params
*params
)
1994 struct mwifiex_adapter
*adapter
= mwifiex_cfg80211_get_adapter(wiphy
);
1995 struct mwifiex_private
*priv
;
1996 struct net_device
*dev
;
1998 struct wireless_dev
*wdev
;
2001 return ERR_PTR(-EFAULT
);
2004 case NL80211_IFTYPE_UNSPECIFIED
:
2005 case NL80211_IFTYPE_STATION
:
2006 case NL80211_IFTYPE_ADHOC
:
2007 priv
= adapter
->priv
[MWIFIEX_BSS_TYPE_STA
];
2008 if (priv
->bss_mode
) {
2010 "cannot create multiple sta/adhoc ifaces\n");
2011 return ERR_PTR(-EINVAL
);
2014 wdev
= kzalloc(sizeof(struct wireless_dev
), GFP_KERNEL
);
2016 return ERR_PTR(-ENOMEM
);
2018 wdev
->wiphy
= wiphy
;
2020 wdev
->iftype
= NL80211_IFTYPE_STATION
;
2022 if (type
== NL80211_IFTYPE_UNSPECIFIED
)
2023 priv
->bss_mode
= NL80211_IFTYPE_STATION
;
2025 priv
->bss_mode
= type
;
2027 priv
->bss_type
= MWIFIEX_BSS_TYPE_STA
;
2028 priv
->frame_type
= MWIFIEX_DATA_FRAME_TYPE_ETH_II
;
2029 priv
->bss_priority
= 0;
2030 priv
->bss_role
= MWIFIEX_BSS_ROLE_STA
;
2034 case NL80211_IFTYPE_AP
:
2035 priv
= adapter
->priv
[MWIFIEX_BSS_TYPE_UAP
];
2037 if (priv
->bss_mode
) {
2038 wiphy_err(wiphy
, "Can't create multiple AP interfaces");
2039 return ERR_PTR(-EINVAL
);
2042 wdev
= kzalloc(sizeof(struct wireless_dev
), GFP_KERNEL
);
2044 return ERR_PTR(-ENOMEM
);
2047 wdev
->wiphy
= wiphy
;
2048 wdev
->iftype
= NL80211_IFTYPE_AP
;
2050 priv
->bss_type
= MWIFIEX_BSS_TYPE_UAP
;
2051 priv
->frame_type
= MWIFIEX_DATA_FRAME_TYPE_ETH_II
;
2052 priv
->bss_priority
= 0;
2053 priv
->bss_role
= MWIFIEX_BSS_ROLE_UAP
;
2054 priv
->bss_started
= 0;
2056 priv
->bss_mode
= type
;
2059 case NL80211_IFTYPE_P2P_CLIENT
:
2060 priv
= adapter
->priv
[MWIFIEX_BSS_TYPE_P2P
];
2062 if (priv
->bss_mode
) {
2063 wiphy_err(wiphy
, "Can't create multiple P2P ifaces");
2064 return ERR_PTR(-EINVAL
);
2067 wdev
= kzalloc(sizeof(struct wireless_dev
), GFP_KERNEL
);
2069 return ERR_PTR(-ENOMEM
);
2072 wdev
->wiphy
= wiphy
;
2074 /* At start-up, wpa_supplicant tries to change the interface
2075 * to NL80211_IFTYPE_STATION if it is not managed mode.
2076 * So, we initialize it to STA mode.
2078 wdev
->iftype
= NL80211_IFTYPE_STATION
;
2079 priv
->bss_mode
= NL80211_IFTYPE_STATION
;
2081 /* Setting bss_type to P2P tells firmware that this interface
2082 * is receiving P2P peers found during find phase and doing
2083 * action frame handshake.
2085 priv
->bss_type
= MWIFIEX_BSS_TYPE_P2P
;
2087 priv
->frame_type
= MWIFIEX_DATA_FRAME_TYPE_ETH_II
;
2088 priv
->bss_priority
= MWIFIEX_BSS_ROLE_STA
;
2089 priv
->bss_role
= MWIFIEX_BSS_ROLE_STA
;
2090 priv
->bss_started
= 0;
2095 wiphy_err(wiphy
, "type not supported\n");
2096 return ERR_PTR(-EINVAL
);
2099 dev
= alloc_netdev_mqs(sizeof(struct mwifiex_private
*), name
,
2100 ether_setup
, IEEE80211_NUM_ACS
, 1);
2102 wiphy_err(wiphy
, "no memory available for netdevice\n");
2103 priv
->bss_mode
= NL80211_IFTYPE_UNSPECIFIED
;
2104 return ERR_PTR(-ENOMEM
);
2107 mwifiex_init_priv_params(priv
, dev
);
2110 mwifiex_setup_ht_caps(&wiphy
->bands
[IEEE80211_BAND_2GHZ
]->ht_cap
, priv
);
2112 if (adapter
->config_bands
& BAND_A
)
2113 mwifiex_setup_ht_caps(
2114 &wiphy
->bands
[IEEE80211_BAND_5GHZ
]->ht_cap
, priv
);
2116 dev_net_set(dev
, wiphy_net(wiphy
));
2117 dev
->ieee80211_ptr
= priv
->wdev
;
2118 dev
->ieee80211_ptr
->iftype
= priv
->bss_mode
;
2119 memcpy(dev
->dev_addr
, wiphy
->perm_addr
, ETH_ALEN
);
2120 memcpy(dev
->perm_addr
, wiphy
->perm_addr
, ETH_ALEN
);
2121 SET_NETDEV_DEV(dev
, wiphy_dev(wiphy
));
2123 dev
->flags
|= IFF_BROADCAST
| IFF_MULTICAST
;
2124 dev
->watchdog_timeo
= MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT
;
2125 dev
->hard_header_len
+= MWIFIEX_MIN_DATA_HEADER_LEN
;
2127 mdev_priv
= netdev_priv(dev
);
2128 *((unsigned long *) mdev_priv
) = (unsigned long) priv
;
2130 SET_NETDEV_DEV(dev
, adapter
->dev
);
2132 /* Register network device */
2133 if (register_netdevice(dev
)) {
2134 wiphy_err(wiphy
, "cannot register virtual network device\n");
2136 priv
->bss_mode
= NL80211_IFTYPE_UNSPECIFIED
;
2137 return ERR_PTR(-EFAULT
);
2140 sema_init(&priv
->async_sem
, 1);
2142 dev_dbg(adapter
->dev
, "info: %s: Marvell 802.11 Adapter\n", dev
->name
);
2144 #ifdef CONFIG_DEBUG_FS
2145 mwifiex_dev_debugfs_init(priv
);
2149 EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf
);
2152 * del_virtual_intf: remove the virtual interface determined by dev
2154 int mwifiex_del_virtual_intf(struct wiphy
*wiphy
, struct wireless_dev
*wdev
)
2156 struct mwifiex_private
*priv
= mwifiex_netdev_get_priv(wdev
->netdev
);
2158 #ifdef CONFIG_DEBUG_FS
2159 mwifiex_dev_debugfs_remove(priv
);
2162 mwifiex_stop_net_dev_queue(priv
->netdev
, priv
->adapter
);
2164 if (netif_carrier_ok(priv
->netdev
))
2165 netif_carrier_off(priv
->netdev
);
2167 if (wdev
->netdev
->reg_state
== NETREG_REGISTERED
)
2168 unregister_netdevice(wdev
->netdev
);
2170 if (wdev
->netdev
->reg_state
== NETREG_UNREGISTERED
)
2171 free_netdev(wdev
->netdev
);
2173 /* Clear the priv in adapter */
2174 priv
->netdev
= NULL
;
2176 priv
->media_connected
= false;
2178 priv
->bss_mode
= NL80211_IFTYPE_UNSPECIFIED
;
2182 EXPORT_SYMBOL_GPL(mwifiex_del_virtual_intf
);
2184 /* station cfg80211 operations */
2185 static struct cfg80211_ops mwifiex_cfg80211_ops
= {
2186 .add_virtual_intf
= mwifiex_add_virtual_intf
,
2187 .del_virtual_intf
= mwifiex_del_virtual_intf
,
2188 .change_virtual_intf
= mwifiex_cfg80211_change_virtual_intf
,
2189 .scan
= mwifiex_cfg80211_scan
,
2190 .connect
= mwifiex_cfg80211_connect
,
2191 .disconnect
= mwifiex_cfg80211_disconnect
,
2192 .get_station
= mwifiex_cfg80211_get_station
,
2193 .dump_station
= mwifiex_cfg80211_dump_station
,
2194 .set_wiphy_params
= mwifiex_cfg80211_set_wiphy_params
,
2195 .join_ibss
= mwifiex_cfg80211_join_ibss
,
2196 .leave_ibss
= mwifiex_cfg80211_leave_ibss
,
2197 .add_key
= mwifiex_cfg80211_add_key
,
2198 .del_key
= mwifiex_cfg80211_del_key
,
2199 .mgmt_tx
= mwifiex_cfg80211_mgmt_tx
,
2200 .mgmt_frame_register
= mwifiex_cfg80211_mgmt_frame_register
,
2201 .remain_on_channel
= mwifiex_cfg80211_remain_on_channel
,
2202 .cancel_remain_on_channel
= mwifiex_cfg80211_cancel_remain_on_channel
,
2203 .set_default_key
= mwifiex_cfg80211_set_default_key
,
2204 .set_power_mgmt
= mwifiex_cfg80211_set_power_mgmt
,
2205 .set_tx_power
= mwifiex_cfg80211_set_tx_power
,
2206 .set_bitrate_mask
= mwifiex_cfg80211_set_bitrate_mask
,
2207 .start_ap
= mwifiex_cfg80211_start_ap
,
2208 .stop_ap
= mwifiex_cfg80211_stop_ap
,
2209 .change_beacon
= mwifiex_cfg80211_change_beacon
,
2210 .set_cqm_rssi_config
= mwifiex_cfg80211_set_cqm_rssi_config
,
2211 .set_antenna
= mwifiex_cfg80211_set_antenna
,
2215 * This function registers the device with CFG802.11 subsystem.
2217 * The function creates the wireless device/wiphy, populates it with
2218 * default parameters and handler function pointers, and finally
2219 * registers the device.
2222 int mwifiex_register_cfg80211(struct mwifiex_adapter
*adapter
)
2226 struct wiphy
*wiphy
;
2227 struct mwifiex_private
*priv
= adapter
->priv
[MWIFIEX_BSS_TYPE_STA
];
2230 /* create a new wiphy for use with cfg80211 */
2231 wiphy
= wiphy_new(&mwifiex_cfg80211_ops
,
2232 sizeof(struct mwifiex_adapter
*));
2234 dev_err(adapter
->dev
, "%s: creating new wiphy\n", __func__
);
2237 wiphy
->max_scan_ssids
= MWIFIEX_MAX_SSID_LIST_LENGTH
;
2238 wiphy
->max_scan_ie_len
= MWIFIEX_MAX_VSIE_LEN
;
2239 wiphy
->mgmt_stypes
= mwifiex_mgmt_stypes
;
2240 wiphy
->max_remain_on_channel_duration
= 5000;
2241 wiphy
->interface_modes
= BIT(NL80211_IFTYPE_STATION
) |
2242 BIT(NL80211_IFTYPE_ADHOC
) |
2243 BIT(NL80211_IFTYPE_P2P_CLIENT
) |
2244 BIT(NL80211_IFTYPE_P2P_GO
) |
2245 BIT(NL80211_IFTYPE_AP
);
2247 wiphy
->bands
[IEEE80211_BAND_2GHZ
] = &mwifiex_band_2ghz
;
2248 if (adapter
->config_bands
& BAND_A
)
2249 wiphy
->bands
[IEEE80211_BAND_5GHZ
] = &mwifiex_band_5ghz
;
2251 wiphy
->bands
[IEEE80211_BAND_5GHZ
] = NULL
;
2253 wiphy
->iface_combinations
= &mwifiex_iface_comb_ap_sta
;
2254 wiphy
->n_iface_combinations
= 1;
2256 /* Initialize cipher suits */
2257 wiphy
->cipher_suites
= mwifiex_cipher_suites
;
2258 wiphy
->n_cipher_suites
= ARRAY_SIZE(mwifiex_cipher_suites
);
2260 memcpy(wiphy
->perm_addr
, priv
->curr_addr
, ETH_ALEN
);
2261 wiphy
->signal_type
= CFG80211_SIGNAL_TYPE_MBM
;
2262 wiphy
->flags
|= WIPHY_FLAG_HAVE_AP_SME
|
2263 WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD
|
2264 WIPHY_FLAG_CUSTOM_REGULATORY
|
2265 WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL
;
2267 wiphy_apply_custom_regulatory(wiphy
, &mwifiex_world_regdom_custom
);
2269 wiphy
->probe_resp_offload
= NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS
|
2270 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2
|
2271 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P
;
2273 wiphy
->available_antennas_tx
= BIT(adapter
->number_of_antenna
) - 1;
2274 wiphy
->available_antennas_rx
= BIT(adapter
->number_of_antenna
) - 1;
2276 wiphy
->features
|= NL80211_FEATURE_HT_IBSS
|
2277 NL80211_FEATURE_INACTIVITY_TIMER
|
2278 NL80211_FEATURE_LOW_PRIORITY_SCAN
;
2280 /* Reserve space for mwifiex specific private data for BSS */
2281 wiphy
->bss_priv_size
= sizeof(struct mwifiex_bss_priv
);
2283 wiphy
->reg_notifier
= mwifiex_reg_notifier
;
2285 /* Set struct mwifiex_adapter pointer in wiphy_priv */
2286 wdev_priv
= wiphy_priv(wiphy
);
2287 *(unsigned long *)wdev_priv
= (unsigned long)adapter
;
2289 set_wiphy_dev(wiphy
, priv
->adapter
->dev
);
2291 ret
= wiphy_register(wiphy
);
2293 dev_err(adapter
->dev
,
2294 "%s: wiphy_register failed: %d\n", __func__
, ret
);
2298 country_code
= mwifiex_11d_code_2_region(priv
->adapter
->region_code
);
2300 dev_info(adapter
->dev
,
2301 "ignoring F/W country code %2.2s\n", country_code
);
2303 adapter
->wiphy
= wiphy
;