ALSA: hda - Use LPIB for ATI/AMD chipsets as default
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / wireless / iwlwifi / iwl-agn-rxon.c
1 /******************************************************************************
2 *
3 * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17 *
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
20 *
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 *
25 *****************************************************************************/
26
27 #include "iwl-dev.h"
28 #include "iwl-agn.h"
29 #include "iwl-sta.h"
30 #include "iwl-core.h"
31 #include "iwl-agn-calib.h"
32
33 static int iwlagn_disable_bss(struct iwl_priv *priv,
34 struct iwl_rxon_context *ctx,
35 struct iwl_rxon_cmd *send)
36 {
37 __le32 old_filter = send->filter_flags;
38 int ret;
39
40 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
41 ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
42
43 send->filter_flags = old_filter;
44
45 if (ret)
46 IWL_ERR(priv, "Error clearing ASSOC_MSK on BSS (%d)\n", ret);
47
48 return ret;
49 }
50
51 static int iwlagn_disable_pan(struct iwl_priv *priv,
52 struct iwl_rxon_context *ctx,
53 struct iwl_rxon_cmd *send)
54 {
55 struct iwl_notification_wait disable_wait;
56 __le32 old_filter = send->filter_flags;
57 u8 old_dev_type = send->dev_type;
58 int ret;
59
60 iwlagn_init_notification_wait(priv, &disable_wait, NULL,
61 REPLY_WIPAN_DEACTIVATION_COMPLETE);
62
63 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
64 send->dev_type = RXON_DEV_TYPE_P2P;
65 ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
66
67 send->filter_flags = old_filter;
68 send->dev_type = old_dev_type;
69
70 if (ret) {
71 IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
72 iwlagn_remove_notification(priv, &disable_wait);
73 } else {
74 signed long wait_res;
75
76 wait_res = iwlagn_wait_notification(priv, &disable_wait, HZ);
77 if (wait_res == 0) {
78 IWL_ERR(priv, "Timed out waiting for PAN disable\n");
79 ret = -EIO;
80 }
81 }
82
83 return ret;
84 }
85
86 static void iwlagn_update_qos(struct iwl_priv *priv,
87 struct iwl_rxon_context *ctx)
88 {
89 int ret;
90
91 if (!ctx->is_active)
92 return;
93
94 ctx->qos_data.def_qos_parm.qos_flags = 0;
95
96 if (ctx->qos_data.qos_active)
97 ctx->qos_data.def_qos_parm.qos_flags |=
98 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
99
100 if (ctx->ht.enabled)
101 ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
102
103 IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
104 ctx->qos_data.qos_active,
105 ctx->qos_data.def_qos_parm.qos_flags);
106
107 ret = iwl_send_cmd_pdu(priv, ctx->qos_cmd,
108 sizeof(struct iwl_qosparam_cmd),
109 &ctx->qos_data.def_qos_parm);
110 if (ret)
111 IWL_ERR(priv, "Failed to update QoS\n");
112 }
113
114 static int iwlagn_update_beacon(struct iwl_priv *priv,
115 struct ieee80211_vif *vif)
116 {
117 lockdep_assert_held(&priv->mutex);
118
119 dev_kfree_skb(priv->beacon_skb);
120 priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
121 if (!priv->beacon_skb)
122 return -ENOMEM;
123 return iwlagn_send_beacon_cmd(priv);
124 }
125
126 /**
127 * iwlagn_commit_rxon - commit staging_rxon to hardware
128 *
129 * The RXON command in staging_rxon is committed to the hardware and
130 * the active_rxon structure is updated with the new data. This
131 * function correctly transitions out of the RXON_ASSOC_MSK state if
132 * a HW tune is required based on the RXON structure changes.
133 */
134 int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
135 {
136 /* cast away the const for active_rxon in this function */
137 struct iwl_rxon_cmd *active = (void *)&ctx->active;
138 bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
139 bool old_assoc = !!(ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK);
140 int ret;
141
142 lockdep_assert_held(&priv->mutex);
143
144 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
145 return -EINVAL;
146
147 if (!iwl_is_alive(priv))
148 return -EBUSY;
149
150 /* This function hardcodes a bunch of dual-mode assumptions */
151 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
152
153 if (!ctx->is_active)
154 return 0;
155
156 /* always get timestamp with Rx frame */
157 ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
158
159 if (ctx->ctxid == IWL_RXON_CTX_PAN && priv->_agn.hw_roc_channel) {
160 struct ieee80211_channel *chan = priv->_agn.hw_roc_channel;
161
162 iwl_set_rxon_channel(priv, chan, ctx);
163 iwl_set_flags_for_band(priv, ctx, chan->band, NULL);
164 ctx->staging.filter_flags |=
165 RXON_FILTER_ASSOC_MSK |
166 RXON_FILTER_PROMISC_MSK |
167 RXON_FILTER_CTL2HOST_MSK;
168 ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
169 new_assoc = true;
170
171 if (memcmp(&ctx->staging, &ctx->active,
172 sizeof(ctx->staging)) == 0)
173 return 0;
174 }
175
176 if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
177 !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
178 ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
179 else
180 ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
181
182 ret = iwl_check_rxon_cmd(priv, ctx);
183 if (ret) {
184 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
185 return -EINVAL;
186 }
187
188 /*
189 * receive commit_rxon request
190 * abort any previous channel switch if still in process
191 */
192 if (priv->switch_rxon.switch_in_progress &&
193 (priv->switch_rxon.channel != ctx->staging.channel)) {
194 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
195 le16_to_cpu(priv->switch_rxon.channel));
196 iwl_chswitch_done(priv, false);
197 }
198
199 /*
200 * If we don't need to send a full RXON, we can use
201 * iwl_rxon_assoc_cmd which is used to reconfigure filter
202 * and other flags for the current radio configuration.
203 */
204 if (!iwl_full_rxon_required(priv, ctx)) {
205 ret = iwl_send_rxon_assoc(priv, ctx);
206 if (ret) {
207 IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
208 return ret;
209 }
210
211 memcpy(active, &ctx->staging, sizeof(*active));
212 iwl_print_rx_config_cmd(priv, ctx);
213 return 0;
214 }
215
216 if (priv->cfg->ops->hcmd->set_pan_params) {
217 ret = priv->cfg->ops->hcmd->set_pan_params(priv);
218 if (ret)
219 return ret;
220 }
221
222 iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
223
224 IWL_DEBUG_INFO(priv,
225 "Going to commit RXON\n"
226 " * with%s RXON_FILTER_ASSOC_MSK\n"
227 " * channel = %d\n"
228 " * bssid = %pM\n",
229 (new_assoc ? "" : "out"),
230 le16_to_cpu(ctx->staging.channel),
231 ctx->staging.bssid_addr);
232
233 /*
234 * Always clear associated first, but with the correct config.
235 * This is required as for example station addition for the
236 * AP station must be done after the BSSID is set to correctly
237 * set up filters in the device.
238 */
239 if ((old_assoc && new_assoc) || !new_assoc) {
240 if (ctx->ctxid == IWL_RXON_CTX_BSS)
241 ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
242 else
243 ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
244 if (ret)
245 return ret;
246
247 memcpy(active, &ctx->staging, sizeof(*active));
248
249 /*
250 * Un-assoc RXON clears the station table and WEP
251 * keys, so we have to restore those afterwards.
252 */
253 iwl_clear_ucode_stations(priv, ctx);
254 iwl_restore_stations(priv, ctx);
255 ret = iwl_restore_default_wep_keys(priv, ctx);
256 if (ret) {
257 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
258 return ret;
259 }
260 }
261
262 /* RXON timing must be before associated RXON */
263 ret = iwl_send_rxon_timing(priv, ctx);
264 if (ret) {
265 IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
266 return ret;
267 }
268
269 if (new_assoc) {
270 /* QoS info may be cleared by previous un-assoc RXON */
271 iwlagn_update_qos(priv, ctx);
272
273 /*
274 * We'll run into this code path when beaconing is
275 * enabled, but then we also need to send the beacon
276 * to the device.
277 */
278 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
279 ret = iwlagn_update_beacon(priv, ctx->vif);
280 if (ret) {
281 IWL_ERR(priv,
282 "Error sending required beacon (%d)!\n",
283 ret);
284 return ret;
285 }
286 }
287
288 priv->start_calib = 0;
289 /*
290 * Apply the new configuration.
291 *
292 * Associated RXON doesn't clear the station table in uCode,
293 * so we don't need to restore stations etc. after this.
294 */
295 ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
296 sizeof(struct iwl_rxon_cmd), &ctx->staging);
297 if (ret) {
298 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
299 return ret;
300 }
301 memcpy(active, &ctx->staging, sizeof(*active));
302
303 iwl_reprogram_ap_sta(priv, ctx);
304
305 /* IBSS beacon needs to be sent after setting assoc */
306 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
307 if (iwlagn_update_beacon(priv, ctx->vif))
308 IWL_ERR(priv, "Error sending IBSS beacon\n");
309 }
310
311 iwl_print_rx_config_cmd(priv, ctx);
312
313 iwl_init_sensitivity(priv);
314
315 /*
316 * If we issue a new RXON command which required a tune then we must
317 * send a new TXPOWER command or we won't be able to Tx any frames.
318 *
319 * It's expected we set power here if channel is changing.
320 */
321 ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
322 if (ret) {
323 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
324 return ret;
325 }
326
327 return 0;
328 }
329
330 int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
331 {
332 struct iwl_priv *priv = hw->priv;
333 struct iwl_rxon_context *ctx;
334 struct ieee80211_conf *conf = &hw->conf;
335 struct ieee80211_channel *channel = conf->channel;
336 const struct iwl_channel_info *ch_info;
337 int ret = 0;
338 bool ht_changed[NUM_IWL_RXON_CTX] = {};
339
340 IWL_DEBUG_MAC80211(priv, "changed %#x", changed);
341
342 mutex_lock(&priv->mutex);
343
344 if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
345 IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
346 goto out;
347 }
348
349 if (!iwl_is_ready(priv)) {
350 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
351 goto out;
352 }
353
354 if (changed & (IEEE80211_CONF_CHANGE_SMPS |
355 IEEE80211_CONF_CHANGE_CHANNEL)) {
356 /* mac80211 uses static for non-HT which is what we want */
357 priv->current_ht_config.smps = conf->smps_mode;
358
359 /*
360 * Recalculate chain counts.
361 *
362 * If monitor mode is enabled then mac80211 will
363 * set up the SM PS mode to OFF if an HT channel is
364 * configured.
365 */
366 if (priv->cfg->ops->hcmd->set_rxon_chain)
367 for_each_context(priv, ctx)
368 priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
369 }
370
371 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
372 unsigned long flags;
373
374 ch_info = iwl_get_channel_info(priv, channel->band,
375 channel->hw_value);
376 if (!is_channel_valid(ch_info)) {
377 IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
378 ret = -EINVAL;
379 goto out;
380 }
381
382 spin_lock_irqsave(&priv->lock, flags);
383
384 for_each_context(priv, ctx) {
385 /* Configure HT40 channels */
386 if (ctx->ht.enabled != conf_is_ht(conf)) {
387 ctx->ht.enabled = conf_is_ht(conf);
388 ht_changed[ctx->ctxid] = true;
389 }
390
391 if (ctx->ht.enabled) {
392 if (conf_is_ht40_minus(conf)) {
393 ctx->ht.extension_chan_offset =
394 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
395 ctx->ht.is_40mhz = true;
396 } else if (conf_is_ht40_plus(conf)) {
397 ctx->ht.extension_chan_offset =
398 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
399 ctx->ht.is_40mhz = true;
400 } else {
401 ctx->ht.extension_chan_offset =
402 IEEE80211_HT_PARAM_CHA_SEC_NONE;
403 ctx->ht.is_40mhz = false;
404 }
405 } else
406 ctx->ht.is_40mhz = false;
407
408 /*
409 * Default to no protection. Protection mode will
410 * later be set from BSS config in iwl_ht_conf
411 */
412 ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
413
414 /* if we are switching from ht to 2.4 clear flags
415 * from any ht related info since 2.4 does not
416 * support ht */
417 if (le16_to_cpu(ctx->staging.channel) !=
418 channel->hw_value)
419 ctx->staging.flags = 0;
420
421 iwl_set_rxon_channel(priv, channel, ctx);
422 iwl_set_rxon_ht(priv, &priv->current_ht_config);
423
424 iwl_set_flags_for_band(priv, ctx, channel->band,
425 ctx->vif);
426 }
427
428 spin_unlock_irqrestore(&priv->lock, flags);
429
430 iwl_update_bcast_stations(priv);
431
432 /*
433 * The list of supported rates and rate mask can be different
434 * for each band; since the band may have changed, reset
435 * the rate mask to what mac80211 lists.
436 */
437 iwl_set_rate(priv);
438 }
439
440 if (changed & (IEEE80211_CONF_CHANGE_PS |
441 IEEE80211_CONF_CHANGE_IDLE)) {
442 ret = iwl_power_update_mode(priv, false);
443 if (ret)
444 IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
445 }
446
447 if (changed & IEEE80211_CONF_CHANGE_POWER) {
448 IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
449 priv->tx_power_user_lmt, conf->power_level);
450
451 iwl_set_tx_power(priv, conf->power_level, false);
452 }
453
454 for_each_context(priv, ctx) {
455 if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
456 continue;
457 iwlagn_commit_rxon(priv, ctx);
458 if (ht_changed[ctx->ctxid])
459 iwlagn_update_qos(priv, ctx);
460 }
461 out:
462 mutex_unlock(&priv->mutex);
463 return ret;
464 }
465
466 static void iwlagn_check_needed_chains(struct iwl_priv *priv,
467 struct iwl_rxon_context *ctx,
468 struct ieee80211_bss_conf *bss_conf)
469 {
470 struct ieee80211_vif *vif = ctx->vif;
471 struct iwl_rxon_context *tmp;
472 struct ieee80211_sta *sta;
473 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
474 struct ieee80211_sta_ht_cap *ht_cap;
475 bool need_multiple;
476
477 lockdep_assert_held(&priv->mutex);
478
479 switch (vif->type) {
480 case NL80211_IFTYPE_STATION:
481 rcu_read_lock();
482 sta = ieee80211_find_sta(vif, bss_conf->bssid);
483 if (!sta) {
484 /*
485 * If at all, this can only happen through a race
486 * when the AP disconnects us while we're still
487 * setting up the connection, in that case mac80211
488 * will soon tell us about that.
489 */
490 need_multiple = false;
491 rcu_read_unlock();
492 break;
493 }
494
495 ht_cap = &sta->ht_cap;
496
497 need_multiple = true;
498
499 /*
500 * If the peer advertises no support for receiving 2 and 3
501 * stream MCS rates, it can't be transmitting them either.
502 */
503 if (ht_cap->mcs.rx_mask[1] == 0 &&
504 ht_cap->mcs.rx_mask[2] == 0) {
505 need_multiple = false;
506 } else if (!(ht_cap->mcs.tx_params &
507 IEEE80211_HT_MCS_TX_DEFINED)) {
508 /* If it can't TX MCS at all ... */
509 need_multiple = false;
510 } else if (ht_cap->mcs.tx_params &
511 IEEE80211_HT_MCS_TX_RX_DIFF) {
512 int maxstreams;
513
514 /*
515 * But if it can receive them, it might still not
516 * be able to transmit them, which is what we need
517 * to check here -- so check the number of streams
518 * it advertises for TX (if different from RX).
519 */
520
521 maxstreams = (ht_cap->mcs.tx_params &
522 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
523 maxstreams >>=
524 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
525 maxstreams += 1;
526
527 if (maxstreams <= 1)
528 need_multiple = false;
529 }
530
531 rcu_read_unlock();
532 break;
533 case NL80211_IFTYPE_ADHOC:
534 /* currently */
535 need_multiple = false;
536 break;
537 default:
538 /* only AP really */
539 need_multiple = true;
540 break;
541 }
542
543 ctx->ht_need_multiple_chains = need_multiple;
544
545 if (!need_multiple) {
546 /* check all contexts */
547 for_each_context(priv, tmp) {
548 if (!tmp->vif)
549 continue;
550 if (tmp->ht_need_multiple_chains) {
551 need_multiple = true;
552 break;
553 }
554 }
555 }
556
557 ht_conf->single_chain_sufficient = !need_multiple;
558 }
559
560 void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
561 struct ieee80211_vif *vif,
562 struct ieee80211_bss_conf *bss_conf,
563 u32 changes)
564 {
565 struct iwl_priv *priv = hw->priv;
566 struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
567 int ret;
568 bool force = false;
569
570 mutex_lock(&priv->mutex);
571
572 if (unlikely(!iwl_is_ready(priv))) {
573 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
574 mutex_unlock(&priv->mutex);
575 return;
576 }
577
578 if (unlikely(!ctx->vif)) {
579 IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
580 mutex_unlock(&priv->mutex);
581 return;
582 }
583
584 if (changes & BSS_CHANGED_BEACON_INT)
585 force = true;
586
587 if (changes & BSS_CHANGED_QOS) {
588 ctx->qos_data.qos_active = bss_conf->qos;
589 iwlagn_update_qos(priv, ctx);
590 }
591
592 ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
593 if (vif->bss_conf.use_short_preamble)
594 ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
595 else
596 ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
597
598 if (changes & BSS_CHANGED_ASSOC) {
599 if (bss_conf->assoc) {
600 priv->timestamp = bss_conf->timestamp;
601 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
602 } else {
603 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
604 }
605 }
606
607 if (ctx->ht.enabled) {
608 ctx->ht.protection = bss_conf->ht_operation_mode &
609 IEEE80211_HT_OP_MODE_PROTECTION;
610 ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
611 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
612 iwlagn_check_needed_chains(priv, ctx, bss_conf);
613 iwl_set_rxon_ht(priv, &priv->current_ht_config);
614 }
615
616 if (priv->cfg->ops->hcmd->set_rxon_chain)
617 priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
618
619 if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
620 ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
621 else
622 ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
623
624 if (bss_conf->use_cts_prot)
625 ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
626 else
627 ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
628
629 memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
630
631 if (vif->type == NL80211_IFTYPE_AP ||
632 vif->type == NL80211_IFTYPE_ADHOC) {
633 if (vif->bss_conf.enable_beacon) {
634 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
635 priv->beacon_ctx = ctx;
636 } else {
637 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
638 priv->beacon_ctx = NULL;
639 }
640 }
641
642 if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
643 iwlagn_commit_rxon(priv, ctx);
644
645 if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
646 /*
647 * The chain noise calibration will enable PM upon
648 * completion. If calibration has already been run
649 * then we need to enable power management here.
650 */
651 if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
652 iwl_power_update_mode(priv, false);
653
654 /* Enable RX differential gain and sensitivity calibrations */
655 iwl_chain_noise_reset(priv);
656 priv->start_calib = 1;
657 }
658
659 if (changes & BSS_CHANGED_IBSS) {
660 ret = iwlagn_manage_ibss_station(priv, vif,
661 bss_conf->ibss_joined);
662 if (ret)
663 IWL_ERR(priv, "failed to %s IBSS station %pM\n",
664 bss_conf->ibss_joined ? "add" : "remove",
665 bss_conf->bssid);
666 }
667
668 if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
669 priv->beacon_ctx) {
670 if (iwlagn_update_beacon(priv, vif))
671 IWL_ERR(priv, "Error sending IBSS beacon\n");
672 }
673
674 mutex_unlock(&priv->mutex);
675 }
676
677 void iwlagn_post_scan(struct iwl_priv *priv)
678 {
679 struct iwl_rxon_context *ctx;
680
681 /*
682 * Since setting the RXON may have been deferred while
683 * performing the scan, fire one off if needed
684 */
685 for_each_context(priv, ctx)
686 if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
687 iwlagn_commit_rxon(priv, ctx);
688
689 if (priv->cfg->ops->hcmd->set_pan_params)
690 priv->cfg->ops->hcmd->set_pan_params(priv);
691 }