Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / wireless / iwlegacy / 3945-mac.c

/******************************************************************************
 *
 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
 *
 * Portions of this file are derived from the ipw3945 project, as well
 * as portions of the ieee80211 subsystem header files.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * The full GNU General Public License is included in this distribution in the
 * file called LICENSE.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 *****************************************************************************/

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>

#include <net/ieee80211_radiotap.h>
#include <net/mac80211.h>

#include <asm/div64.h>

#define DRV_NAME        "iwl3945"

#include "commands.h"
#include "common.h"
#include "3945.h"
#include "iwl-spectrum.h"

/*
 * module name, copyright, version, etc.
 */

#define DRV_DESCRIPTION \
"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"

#ifdef CONFIG_IWLEGACY_DEBUG
#define VD "d"
#else
#define VD
#endif

/*
 * add "s" to indicate spectrum measurement included.
 * we add it here to be consistent with previous releases in which
 * this was configurable.
 */
#define DRV_VERSION  IWLWIFI_VERSION VD "s"
#define DRV_COPYRIGHT   "Copyright(c) 2003-2011 Intel Corporation"
#define DRV_AUTHOR     "<ilw@linux.intel.com>"

MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");

 /* module parameters */
struct il_mod_params il3945_mod_params = {
        .sw_crypto = 1,
        .restart_fw = 1,
        .disable_hw_scan = 1,
        /* the rest are 0 by default */
};

/**
 * il3945_get_antenna_flags - Get antenna flags for RXON command
 * @il: eeprom and antenna fields are used to determine antenna flags
 *
 * il->eeprom39  is used to determine if antenna AUX/MAIN are reversed
 * il3945_mod_params.antenna specifies the antenna diversity mode:
 *
 * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
 * IL_ANTENNA_MAIN      - Force MAIN antenna
 * IL_ANTENNA_AUX       - Force AUX antenna
 */
__le32
il3945_get_antenna_flags(const struct il_priv *il)
{
        struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;

        switch (il3945_mod_params.antenna) {
        case IL_ANTENNA_DIVERSITY:
                return 0;

        case IL_ANTENNA_MAIN:
                if (eeprom->antenna_switch_type)
                        return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
                return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;

        case IL_ANTENNA_AUX:
                if (eeprom->antenna_switch_type)
                        return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
                return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
        }

        /* bad antenna selector value */
        IL_ERR("Bad antenna selector value (0x%x)\n",
               il3945_mod_params.antenna);

        return 0;               /* "diversity" is default if error */
}

static int
il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        unsigned long flags;
        __le16 key_flags = 0;
        int ret;

        key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);

        if (sta_id == il->hw_params.bcast_id)
                key_flags |= STA_KEY_MULTICAST_MSK;

        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
        keyconf->hw_key_idx = keyconf->keyidx;
        key_flags &= ~STA_KEY_FLG_INVALID;

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
        il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);

        memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);

        if ((il->stations[sta_id].sta.key.
             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
                il->stations[sta_id].sta.key.key_offset =
                    il_get_free_ucode_key_idx(il);
        /* else, we are overriding an existing key => no need to allocated room
         * in uCode. */

        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
             "no space for a new key");

        il->stations[sta_id].sta.key.key_flags = key_flags;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;

        D_INFO("hwcrypto: modify ucode station key info\n");

        ret = il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);

        spin_unlock_irqrestore(&il->sta_lock, flags);

        return ret;
}

static int
il3945_set_tkip_dynamic_key_info(struct il_priv *il,
                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        return -EOPNOTSUPP;
}

static int
il3945_set_wep_dynamic_key_info(struct il_priv *il,
                                struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        return -EOPNOTSUPP;
}

static int
il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
{
        unsigned long flags;
        struct il_addsta_cmd sta_cmd;

        spin_lock_irqsave(&il->sta_lock, flags);
        memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
        memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
        il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        D_INFO("hwcrypto: clear ucode station key info\n");
        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

static int
il3945_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
                       u8 sta_id)
{
        int ret = 0;

        keyconf->hw_key_idx = HW_KEY_DYNAMIC;

        switch (keyconf->cipher) {
        case WLAN_CIPHER_SUITE_CCMP:
                ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
                break;
        case WLAN_CIPHER_SUITE_TKIP:
                ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
                break;
        case WLAN_CIPHER_SUITE_WEP40:
        case WLAN_CIPHER_SUITE_WEP104:
                ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
                break;
        default:
                IL_ERR("Unknown alg: %s alg=%x\n", __func__, keyconf->cipher);
                ret = -EINVAL;
        }

        D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
              keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);

        return ret;
}

static int
il3945_remove_static_key(struct il_priv *il)
{
        int ret = -EOPNOTSUPP;

        return ret;
}

static int
il3945_set_static_key(struct il_priv *il, struct ieee80211_key_conf *key)
{
        if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
            key->cipher == WLAN_CIPHER_SUITE_WEP104)
                return -EOPNOTSUPP;

        IL_ERR("Static key invalid: cipher %x\n", key->cipher);
        return -EINVAL;
}

static void
il3945_clear_free_frames(struct il_priv *il)
{
        struct list_head *element;

        D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);

        while (!list_empty(&il->free_frames)) {
                element = il->free_frames.next;
                list_del(element);
                kfree(list_entry(element, struct il3945_frame, list));
                il->frames_count--;
        }

        if (il->frames_count) {
                IL_WARN("%d frames still in use.  Did we lose one?\n",
                        il->frames_count);
                il->frames_count = 0;
        }
}

static struct il3945_frame *
il3945_get_free_frame(struct il_priv *il)
{
        struct il3945_frame *frame;
        struct list_head *element;
        if (list_empty(&il->free_frames)) {
                frame = kzalloc(sizeof(*frame), GFP_KERNEL);
                if (!frame) {
                        IL_ERR("Could not allocate frame!\n");
                        return NULL;
                }

                il->frames_count++;
                return frame;
        }

        element = il->free_frames.next;
        list_del(element);
        return list_entry(element, struct il3945_frame, list);
}

static void
il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
{
        memset(frame, 0, sizeof(*frame));
        list_add(&frame->list, &il->free_frames);
}

unsigned int
il3945_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
                         int left)
{

        if (!il_is_associated(il) || !il->beacon_skb)
                return 0;

        if (il->beacon_skb->len > left)
                return 0;

        memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);

        return il->beacon_skb->len;
}

static int
il3945_send_beacon_cmd(struct il_priv *il)
{
        struct il3945_frame *frame;
        unsigned int frame_size;
        int rc;
        u8 rate;

        frame = il3945_get_free_frame(il);

        if (!frame) {
                IL_ERR("Could not obtain free frame buffer for beacon "
                       "command.\n");
                return -ENOMEM;
        }

        rate = il_get_lowest_plcp(il);

        frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);

        rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);

        il3945_free_frame(il, frame);

        return rc;
}

static void
il3945_unset_hw_params(struct il_priv *il)
{
        if (il->_3945.shared_virt)
                dma_free_coherent(&il->pci_dev->dev,
                                  sizeof(struct il3945_shared),
                                  il->_3945.shared_virt, il->_3945.shared_phys);
}

static void
il3945_build_tx_cmd_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
                             struct il_device_cmd *cmd,
                             struct sk_buff *skb_frag, int sta_id)
{
        struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
        struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;

        tx_cmd->sec_ctl = 0;

        switch (keyinfo->cipher) {
        case WLAN_CIPHER_SUITE_CCMP:
                tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
                memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
                D_TX("tx_cmd with AES hwcrypto\n");
                break;

        case WLAN_CIPHER_SUITE_TKIP:
                break;

        case WLAN_CIPHER_SUITE_WEP104:
                tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
                /* fall through */
        case WLAN_CIPHER_SUITE_WEP40:
                tx_cmd->sec_ctl |=
                    TX_CMD_SEC_WEP | (info->control.hw_key->
                                      hw_key_idx & TX_CMD_SEC_MSK) <<
                    TX_CMD_SEC_SHIFT;

                memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);

                D_TX("Configuring packet for WEP encryption " "with key %d\n",
                     info->control.hw_key->hw_key_idx);
                break;

        default:
                IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
                break;
        }
}

/*
 * handle build C_TX command notification.
 */
static void
il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd,
                          struct ieee80211_tx_info *info,
                          struct ieee80211_hdr *hdr, u8 std_id)
{
        struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
        __le32 tx_flags = tx_cmd->tx_flags;
        __le16 fc = hdr->frame_control;

        tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
        if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
                tx_flags |= TX_CMD_FLG_ACK_MSK;
                if (ieee80211_is_mgmt(fc))
                        tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
                if (ieee80211_is_probe_resp(fc) &&
                    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
                        tx_flags |= TX_CMD_FLG_TSF_MSK;
        } else {
                tx_flags &= (~TX_CMD_FLG_ACK_MSK);
                tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
        }

        tx_cmd->sta_id = std_id;
        if (ieee80211_has_morefrags(fc))
                tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;

        if (ieee80211_is_data_qos(fc)) {
                u8 *qc = ieee80211_get_qos_ctl(hdr);
                tx_cmd->tid_tspec = qc[0] & 0xf;
                tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
        } else {
                tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
        }

        il_tx_cmd_protection(il, info, fc, &tx_flags);

        tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
        if (ieee80211_is_mgmt(fc)) {
                if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
                        tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
                else
                        tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
        } else {
                tx_cmd->timeout.pm_frame_timeout = 0;
        }

        tx_cmd->driver_txop = 0;
        tx_cmd->tx_flags = tx_flags;
        tx_cmd->next_frame_len = 0;
}

/*
 * start C_TX command process
 */
static int
il3945_tx_skb(struct il_priv *il,
              struct ieee80211_sta *sta,
              struct sk_buff *skb)
{
        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
        struct il3945_tx_cmd *tx_cmd;
        struct il_tx_queue *txq = NULL;
        struct il_queue *q = NULL;
        struct il_device_cmd *out_cmd;
        struct il_cmd_meta *out_meta;
        dma_addr_t phys_addr;
        dma_addr_t txcmd_phys;
        int txq_id = skb_get_queue_mapping(skb);
        u16 len, idx, hdr_len;
        u8 id;
        u8 unicast;
        u8 sta_id;
        u8 tid = 0;
        __le16 fc;
        u8 wait_write_ptr = 0;
        unsigned long flags;

        spin_lock_irqsave(&il->lock, flags);
        if (il_is_rfkill(il)) {
                D_DROP("Dropping - RF KILL\n");
                goto drop_unlock;
        }

        if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) ==
            IL_INVALID_RATE) {
                IL_ERR("ERROR: No TX rate available.\n");
                goto drop_unlock;
        }

        unicast = !is_multicast_ether_addr(hdr->addr1);
        id = 0;

        fc = hdr->frame_control;

#ifdef CONFIG_IWLEGACY_DEBUG
        if (ieee80211_is_auth(fc))
                D_TX("Sending AUTH frame\n");
        else if (ieee80211_is_assoc_req(fc))
                D_TX("Sending ASSOC frame\n");
        else if (ieee80211_is_reassoc_req(fc))
                D_TX("Sending REASSOC frame\n");
#endif

        spin_unlock_irqrestore(&il->lock, flags);

        hdr_len = ieee80211_hdrlen(fc);

        /* Find idx into station table for destination station */
        sta_id = il_sta_id_or_broadcast(il, sta);
        if (sta_id == IL_INVALID_STATION) {
                D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
                goto drop;
        }

        D_RATE("station Id %d\n", sta_id);

        if (ieee80211_is_data_qos(fc)) {
                u8 *qc = ieee80211_get_qos_ctl(hdr);
                tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
                if (unlikely(tid >= MAX_TID_COUNT))
                        goto drop;
        }

        /* Descriptor for chosen Tx queue */
        txq = &il->txq[txq_id];
        q = &txq->q;

        if ((il_queue_space(q) < q->high_mark))
                goto drop;

        spin_lock_irqsave(&il->lock, flags);

        idx = il_get_cmd_idx(q, q->write_ptr, 0);

        txq->skbs[q->write_ptr] = skb;

        /* Init first empty entry in queue's array of Tx/cmd buffers */
        out_cmd = txq->cmd[idx];
        out_meta = &txq->meta[idx];
        tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
        memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
        memset(tx_cmd, 0, sizeof(*tx_cmd));

        /*
         * Set up the Tx-command (not MAC!) header.
         * Store the chosen Tx queue and TFD idx within the sequence field;
         * after Tx, uCode's Tx response will return this value so driver can
         * locate the frame within the tx queue and do post-tx processing.
         */
        out_cmd->hdr.cmd = C_TX;
        out_cmd->hdr.sequence =
            cpu_to_le16((u16)
                        (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));

        /* Copy MAC header from skb into command buffer */
        memcpy(tx_cmd->hdr, hdr, hdr_len);

        if (info->control.hw_key)
                il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);

        /* TODO need this for burst mode later on */
        il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);

        il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id);

        /* Total # bytes to be transmitted */
        len = (u16) skb->len;
        tx_cmd->len = cpu_to_le16(len);

        il_update_stats(il, true, fc, len);
        tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
        tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;

        if (!ieee80211_has_morefrags(hdr->frame_control)) {
                txq->need_update = 1;
        } else {
                wait_write_ptr = 1;
                txq->need_update = 0;
        }

        D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
        D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
        il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
        il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr,
                          ieee80211_hdrlen(fc));

        /*
         * Use the first empty entry in this queue's command buffer array
         * to contain the Tx command and MAC header concatenated together
         * (payload data will be in another buffer).
         * Size of this varies, due to varying MAC header length.
         * If end is not dword aligned, we'll have 2 extra bytes at the end
         * of the MAC header (device reads on dword boundaries).
         * We'll tell device about this padding later.
         */
        len =
            sizeof(struct il3945_tx_cmd) + sizeof(struct il_cmd_header) +
            hdr_len;
        len = (len + 3) & ~3;

        /* Physical address of this Tx command's header (not MAC header!),
         * within command buffer array. */
        txcmd_phys =
            pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE);
        /* we do not map meta data ... so we can safely access address to
         * provide to unmap command*/
        dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
        dma_unmap_len_set(out_meta, len, len);

        /* Add buffer containing Tx command and MAC(!) header to TFD's
         * first entry */
        il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0);

        /* Set up TFD's 2nd entry to point directly to remainder of skb,
         * if any (802.11 null frames have no payload). */
        len = skb->len - hdr_len;
        if (len) {
                phys_addr =
                    pci_map_single(il->pci_dev, skb->data + hdr_len, len,
                                   PCI_DMA_TODEVICE);
                il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0,
                                               U32_PAD(len));
        }

        /* Tell device the write idx *just past* this latest filled TFD */
        q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
        il_txq_update_write_ptr(il, txq);
        spin_unlock_irqrestore(&il->lock, flags);

        if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
                if (wait_write_ptr) {
                        spin_lock_irqsave(&il->lock, flags);
                        txq->need_update = 1;
                        il_txq_update_write_ptr(il, txq);
                        spin_unlock_irqrestore(&il->lock, flags);
                }

                il_stop_queue(il, txq);
        }

        return 0;

drop_unlock:
        spin_unlock_irqrestore(&il->lock, flags);
drop:
        return -1;
}

static int
il3945_get_measurement(struct il_priv *il,
                       struct ieee80211_measurement_params *params, u8 type)
{
        struct il_spectrum_cmd spectrum;
        struct il_rx_pkt *pkt;
        struct il_host_cmd cmd = {
                .id = C_SPECTRUM_MEASUREMENT,
                .data = (void *)&spectrum,
                .flags = CMD_WANT_SKB,
        };
        u32 add_time = le64_to_cpu(params->start_time);
        int rc;
        int spectrum_resp_status;
        int duration = le16_to_cpu(params->duration);

        if (il_is_associated(il))
                add_time =
                    il_usecs_to_beacons(il,
                                        le64_to_cpu(params->start_time) -
                                        il->_3945.last_tsf,
                                        le16_to_cpu(il->timing.beacon_interval));

        memset(&spectrum, 0, sizeof(spectrum));

        spectrum.channel_count = cpu_to_le16(1);
        spectrum.flags =
            RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
        spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
        cmd.len = sizeof(spectrum);
        spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));

        if (il_is_associated(il))
                spectrum.start_time =
                    il_add_beacon_time(il, il->_3945.last_beacon_time, add_time,
                                       le16_to_cpu(il->timing.beacon_interval));
        else
                spectrum.start_time = 0;

        spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
        spectrum.channels[0].channel = params->channel;
        spectrum.channels[0].type = type;
        if (il->active.flags & RXON_FLG_BAND_24G_MSK)
                spectrum.flags |=
                    RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK |
                    RXON_FLG_TGG_PROTECT_MSK;

        rc = il_send_cmd_sync(il, &cmd);
        if (rc)
                return rc;

        pkt = (struct il_rx_pkt *)cmd.reply_page;
        if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
                IL_ERR("Bad return from N_RX_ON_ASSOC command\n");
                rc = -EIO;
        }

        spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
        switch (spectrum_resp_status) {
        case 0:         /* Command will be handled */
                if (pkt->u.spectrum.id != 0xff) {
                        D_INFO("Replaced existing measurement: %d\n",
                               pkt->u.spectrum.id);
                        il->measurement_status &= ~MEASUREMENT_READY;
                }
                il->measurement_status |= MEASUREMENT_ACTIVE;
                rc = 0;
                break;

        case 1:         /* Command will not be handled */
                rc = -EAGAIN;
                break;
        }

        il_free_pages(il, cmd.reply_page);

        return rc;
}

static void
il3945_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il_alive_resp *palive;
        struct delayed_work *pwork;

        palive = &pkt->u.alive_frame;

        D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
               palive->is_valid, palive->ver_type, palive->ver_subtype);

        if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
                D_INFO("Initialization Alive received.\n");
                memcpy(&il->card_alive_init, &pkt->u.alive_frame,
                       sizeof(struct il_alive_resp));
                pwork = &il->init_alive_start;
        } else {
                D_INFO("Runtime Alive received.\n");
                memcpy(&il->card_alive, &pkt->u.alive_frame,
                       sizeof(struct il_alive_resp));
                pwork = &il->alive_start;
                il3945_disable_events(il);
        }

        /* We delay the ALIVE response by 5ms to
         * give the HW RF Kill time to activate... */
        if (palive->is_valid == UCODE_VALID_OK)
                queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
        else
                IL_WARN("uCode did not respond OK.\n");
}

static void
il3945_hdl_add_sta(struct il_priv *il, struct il_rx_buf *rxb)
{
#ifdef CONFIG_IWLEGACY_DEBUG
        struct il_rx_pkt *pkt = rxb_addr(rxb);
#endif

        D_RX("Received C_ADD_STA: 0x%02X\n", pkt->u.status);
}

static void
il3945_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
#ifdef CONFIG_IWLEGACY_DEBUG
        u8 rate = beacon->beacon_notify_hdr.rate;

        D_RX("beacon status %x retries %d iss %d " "tsf %d %d rate %d\n",
             le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
             beacon->beacon_notify_hdr.failure_frame,
             le32_to_cpu(beacon->ibss_mgr_status),
             le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
#endif

        il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);

}

/* Handle notification from uCode that card's power state is changing
 * due to software, hardware, or critical temperature RFKILL */
static void
il3945_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
        unsigned long status = il->status;

        IL_WARN("Card state received: HW:%s SW:%s\n",
                (flags & HW_CARD_DISABLED) ? "Kill" : "On",
                (flags & SW_CARD_DISABLED) ? "Kill" : "On");

        _il_wr(il, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);

        if (flags & HW_CARD_DISABLED)
                set_bit(S_RFKILL, &il->status);
        else
                clear_bit(S_RFKILL, &il->status);

        il_scan_cancel(il);

        if ((test_bit(S_RFKILL, &status) !=
             test_bit(S_RFKILL, &il->status)))
                wiphy_rfkill_set_hw_state(il->hw->wiphy,
                                          test_bit(S_RFKILL, &il->status));
        else
                wake_up(&il->wait_command_queue);
}

/**
 * il3945_setup_handlers - Initialize Rx handler callbacks
 *
 * Setup the RX handlers for each of the reply types sent from the uCode
 * to the host.
 *
 * This function chains into the hardware specific files for them to setup
 * any hardware specific handlers as well.
 */
static void
il3945_setup_handlers(struct il_priv *il)
{
        il->handlers[N_ALIVE] = il3945_hdl_alive;
        il->handlers[C_ADD_STA] = il3945_hdl_add_sta;
        il->handlers[N_ERROR] = il_hdl_error;
        il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
        il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
        il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
        il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
        il->handlers[N_BEACON] = il3945_hdl_beacon;

        /*
         * The same handler is used for both the REPLY to a discrete
         * stats request from the host as well as for the periodic
         * stats notifications (after received beacons) from the uCode.
         */
        il->handlers[C_STATS] = il3945_hdl_c_stats;
        il->handlers[N_STATS] = il3945_hdl_stats;

        il_setup_rx_scan_handlers(il);
        il->handlers[N_CARD_STATE] = il3945_hdl_card_state;

        /* Set up hardware specific Rx handlers */
        il3945_hw_handler_setup(il);
}

/************************** RX-FUNCTIONS ****************************/
/*
 * Rx theory of operation
 *
 * The host allocates 32 DMA target addresses and passes the host address
 * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
 * 0 to 31
 *
 * Rx Queue Indexes
 * The host/firmware share two idx registers for managing the Rx buffers.
 *
 * The READ idx maps to the first position that the firmware may be writing
 * to -- the driver can read up to (but not including) this position and get
 * good data.
 * The READ idx is managed by the firmware once the card is enabled.
 *
 * The WRITE idx maps to the last position the driver has read from -- the
 * position preceding WRITE is the last slot the firmware can place a packet.
 *
 * The queue is empty (no good data) if WRITE = READ - 1, and is full if
 * WRITE = READ.
 *
 * During initialization, the host sets up the READ queue position to the first
 * IDX position, and WRITE to the last (READ - 1 wrapped)
 *
 * When the firmware places a packet in a buffer, it will advance the READ idx
 * and fire the RX interrupt.  The driver can then query the READ idx and
 * process as many packets as possible, moving the WRITE idx forward as it
 * resets the Rx queue buffers with new memory.
 *
 * The management in the driver is as follows:
 * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free.  When
 *   iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
 *   to replenish the iwl->rxq->rx_free.
 * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
 *   iwl->rxq is replenished and the READ IDX is updated (updating the
 *   'processed' and 'read' driver idxes as well)
 * + A received packet is processed and handed to the kernel network stack,
 *   detached from the iwl->rxq.  The driver 'processed' idx is updated.
 * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
 *   list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
 *   IDX is not incremented and iwl->status(RX_STALLED) is set.  If there
 *   were enough free buffers and RX_STALLED is set it is cleared.
 *
 *
 * Driver sequence:
 *
 * il3945_rx_replenish()     Replenishes rx_free list from rx_used, and calls
 *                            il3945_rx_queue_restock
 * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
 *                            queue, updates firmware pointers, and updates
 *                            the WRITE idx.  If insufficient rx_free buffers
 *                            are available, schedules il3945_rx_replenish
 *
 * -- enable interrupts --
 * ISR - il3945_rx()         Detach il_rx_bufs from pool up to the
 *                            READ IDX, detaching the SKB from the pool.
 *                            Moves the packet buffer from queue to rx_used.
 *                            Calls il3945_rx_queue_restock to refill any empty
 *                            slots.
 * ...
 *
 */

/**
 * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 */
static inline __le32
il3945_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
{
        return cpu_to_le32((u32) dma_addr);
}

/**
 * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
 *
 * If there are slots in the RX queue that need to be restocked,
 * and we have free pre-allocated buffers, fill the ranks as much
 * as we can, pulling from rx_free.
 *
 * This moves the 'write' idx forward to catch up with 'processed', and
 * also updates the memory address in the firmware to reference the new
 * target buffer.
 */
static void
il3945_rx_queue_restock(struct il_priv *il)
{
        struct il_rx_queue *rxq = &il->rxq;
        struct list_head *element;
        struct il_rx_buf *rxb;
        unsigned long flags;
        int write;

        spin_lock_irqsave(&rxq->lock, flags);
        write = rxq->write & ~0x7;
        while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
                /* Get next free Rx buffer, remove from free list */
                element = rxq->rx_free.next;
                rxb = list_entry(element, struct il_rx_buf, list);
                list_del(element);

                /* Point to Rx buffer via next RBD in circular buffer */
                rxq->bd[rxq->write] =
                    il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
                rxq->queue[rxq->write] = rxb;
                rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
                rxq->free_count--;
        }
        spin_unlock_irqrestore(&rxq->lock, flags);
        /* If the pre-allocated buffer pool is dropping low, schedule to
         * refill it */
        if (rxq->free_count <= RX_LOW_WATERMARK)
                queue_work(il->workqueue, &il->rx_replenish);

        /* If we've added more space for the firmware to place data, tell it.
         * Increment device's write pointer in multiples of 8. */
        if (rxq->write_actual != (rxq->write & ~0x7) ||
            abs(rxq->write - rxq->read) > 7) {
                spin_lock_irqsave(&rxq->lock, flags);
                rxq->need_update = 1;
                spin_unlock_irqrestore(&rxq->lock, flags);
                il_rx_queue_update_write_ptr(il, rxq);
        }
}

/**
 * il3945_rx_replenish - Move all used packet from rx_used to rx_free
 *
 * When moving to rx_free an SKB is allocated for the slot.
 *
 * Also restock the Rx queue via il3945_rx_queue_restock.
 * This is called as a scheduled work item (except for during initialization)
 */
static void
il3945_rx_allocate(struct il_priv *il, gfp_t priority)
{
        struct il_rx_queue *rxq = &il->rxq;
        struct list_head *element;
        struct il_rx_buf *rxb;
        struct page *page;
        unsigned long flags;
        gfp_t gfp_mask = priority;

        while (1) {
                spin_lock_irqsave(&rxq->lock, flags);

                if (list_empty(&rxq->rx_used)) {
                        spin_unlock_irqrestore(&rxq->lock, flags);
                        return;
                }
                spin_unlock_irqrestore(&rxq->lock, flags);

                if (rxq->free_count > RX_LOW_WATERMARK)
                        gfp_mask |= __GFP_NOWARN;

                if (il->hw_params.rx_page_order > 0)
                        gfp_mask |= __GFP_COMP;

                /* Alloc a new receive buffer */
                page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
                if (!page) {
                        if (net_ratelimit())
                                D_INFO("Failed to allocate SKB buffer.\n");
                        if (rxq->free_count <= RX_LOW_WATERMARK &&
                            net_ratelimit())
                                IL_ERR("Failed to allocate SKB buffer with %0x."
                                       "Only %u free buffers remaining.\n",
                                       priority, rxq->free_count);
                        /* We don't reschedule replenish work here -- we will
                         * call the restock method and if it still needs
                         * more buffers it will schedule replenish */
                        break;
                }

                spin_lock_irqsave(&rxq->lock, flags);
                if (list_empty(&rxq->rx_used)) {
                        spin_unlock_irqrestore(&rxq->lock, flags);
                        __free_pages(page, il->hw_params.rx_page_order);
                        return;
                }
                element = rxq->rx_used.next;
                rxb = list_entry(element, struct il_rx_buf, list);
                list_del(element);
                spin_unlock_irqrestore(&rxq->lock, flags);

                rxb->page = page;
                /* Get physical address of RB/SKB */
                rxb->page_dma =
                    pci_map_page(il->pci_dev, page, 0,
                                 PAGE_SIZE << il->hw_params.rx_page_order,
                                 PCI_DMA_FROMDEVICE);

                spin_lock_irqsave(&rxq->lock, flags);

                list_add_tail(&rxb->list, &rxq->rx_free);
                rxq->free_count++;
                il->alloc_rxb_page++;

                spin_unlock_irqrestore(&rxq->lock, flags);
        }
}

void
il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
{
        unsigned long flags;
        int i;
        spin_lock_irqsave(&rxq->lock, flags);
        INIT_LIST_HEAD(&rxq->rx_free);
        INIT_LIST_HEAD(&rxq->rx_used);
        /* Fill the rx_used queue with _all_ of the Rx buffers */
        for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
                /* In the reset function, these buffers may have been allocated
                 * to an SKB, so we need to unmap and free potential storage */
                if (rxq->pool[i].page != NULL) {
                        pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
                                       PAGE_SIZE << il->hw_params.rx_page_order,
                                       PCI_DMA_FROMDEVICE);
                        __il_free_pages(il, rxq->pool[i].page);
                        rxq->pool[i].page = NULL;
                }
                list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
        }

        /* Set us so that we have processed and used all buffers, but have
         * not restocked the Rx queue with fresh buffers */
        rxq->read = rxq->write = 0;
        rxq->write_actual = 0;
        rxq->free_count = 0;
        spin_unlock_irqrestore(&rxq->lock, flags);
}

void
il3945_rx_replenish(void *data)
{
        struct il_priv *il = data;
        unsigned long flags;

        il3945_rx_allocate(il, GFP_KERNEL);

        spin_lock_irqsave(&il->lock, flags);
        il3945_rx_queue_restock(il);
        spin_unlock_irqrestore(&il->lock, flags);
}

static void
il3945_rx_replenish_now(struct il_priv *il)
{
        il3945_rx_allocate(il, GFP_ATOMIC);

        il3945_rx_queue_restock(il);
}

/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
 * This free routine walks the list of POOL entries and if SKB is set to
 * non NULL it is unmapped and freed
 */
static void
il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
{
        int i;
        for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
                if (rxq->pool[i].page != NULL) {
                        pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
                                       PAGE_SIZE << il->hw_params.rx_page_order,
                                       PCI_DMA_FROMDEVICE);
                        __il_free_pages(il, rxq->pool[i].page);
                        rxq->pool[i].page = NULL;
                }
        }

        dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
                          rxq->bd_dma);
        dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
                          rxq->rb_stts, rxq->rb_stts_dma);
        rxq->bd = NULL;
        rxq->rb_stts = NULL;
}

/* Convert linear signal-to-noise ratio into dB */
static u8 ratio2dB[100] = {
/*       0   1   2   3   4   5   6   7   8   9 */
        0, 0, 6, 10, 12, 14, 16, 17, 18, 19,    /* 00 - 09 */
        20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
        26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
        29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
        32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
        34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
        36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
        37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
        38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
        39, 39, 39, 39, 39, 40, 40, 40, 40, 40  /* 90 - 99 */
};

/* Calculates a relative dB value from a ratio of linear
 *   (i.e. not dB) signal levels.
 * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
int
il3945_calc_db_from_ratio(int sig_ratio)
{
        /* 1000:1 or higher just report as 60 dB */
        if (sig_ratio >= 1000)
                return 60;

        /* 100:1 or higher, divide by 10 and use table,
         *   add 20 dB to make up for divide by 10 */
        if (sig_ratio >= 100)
                return 20 + (int)ratio2dB[sig_ratio / 10];

        /* We shouldn't see this */
        if (sig_ratio < 1)
                return 0;

        /* Use table for ratios 1:1 - 99:1 */
        return (int)ratio2dB[sig_ratio];
}

/**
 * il3945_rx_handle - Main entry function for receiving responses from uCode
 *
 * Uses the il->handlers callback function array to invoke
 * the appropriate handlers, including command responses,
 * frame-received notifications, and other notifications.
 */
static void
il3945_rx_handle(struct il_priv *il)
{
        struct il_rx_buf *rxb;
        struct il_rx_pkt *pkt;
        struct il_rx_queue *rxq = &il->rxq;
        u32 r, i;
        int reclaim;
        unsigned long flags;
        u8 fill_rx = 0;
        u32 count = 8;
        int total_empty = 0;

        /* uCode's read idx (stored in shared DRAM) indicates the last Rx
         * buffer that the driver may process (last buffer filled by ucode). */
        r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
        i = rxq->read;

        /* calculate total frames need to be restock after handling RX */
        total_empty = r - rxq->write_actual;
        if (total_empty < 0)
                total_empty += RX_QUEUE_SIZE;

        if (total_empty > (RX_QUEUE_SIZE / 2))
                fill_rx = 1;
        /* Rx interrupt, but nothing sent from uCode */
        if (i == r)
                D_RX("r = %d, i = %d\n", r, i);

        while (i != r) {
                int len;

                rxb = rxq->queue[i];

                /* If an RXB doesn't have a Rx queue slot associated with it,
                 * then a bug has been introduced in the queue refilling
                 * routines -- catch it here */
                BUG_ON(rxb == NULL);

                rxq->queue[i] = NULL;

                pci_unmap_page(il->pci_dev, rxb->page_dma,
                               PAGE_SIZE << il->hw_params.rx_page_order,
                               PCI_DMA_FROMDEVICE);
                pkt = rxb_addr(rxb);

                len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
                len += sizeof(u32);     /* account for status word */

                /* Reclaim a command buffer only if this packet is a response
                 *   to a (driver-originated) command.
                 * If the packet (e.g. Rx frame) originated from uCode,
                 *   there is no command buffer to reclaim.
                 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
                 *   but apparently a few don't get set; catch them here. */
                reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
                    pkt->hdr.cmd != N_STATS && pkt->hdr.cmd != C_TX;

                /* Based on type of command response or notification,
                 *   handle those that need handling via function in
                 *   handlers table.  See il3945_setup_handlers() */
                if (il->handlers[pkt->hdr.cmd]) {
                        D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
                             il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
                        il->isr_stats.handlers[pkt->hdr.cmd]++;
                        il->handlers[pkt->hdr.cmd] (il, rxb);
                } else {
                        /* No handling needed */
                        D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
                             i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
                }

                /*
                 * XXX: After here, we should always check rxb->page
                 * against NULL before touching it or its virtual
                 * memory (pkt). Because some handler might have
                 * already taken or freed the pages.
                 */

                if (reclaim) {
                        /* Invoke any callbacks, transfer the buffer to caller,
                         * and fire off the (possibly) blocking il_send_cmd()
                         * as we reclaim the driver command queue */
                        if (rxb->page)
                                il_tx_cmd_complete(il, rxb);
                        else
                                IL_WARN("Claim null rxb?\n");
                }

                /* Reuse the page if possible. For notification packets and
                 * SKBs that fail to Rx correctly, add them back into the
                 * rx_free list for reuse later. */
                spin_lock_irqsave(&rxq->lock, flags);
                if (rxb->page != NULL) {
                        rxb->page_dma =
                            pci_map_page(il->pci_dev, rxb->page, 0,
                                         PAGE_SIZE << il->hw_params.
                                         rx_page_order, PCI_DMA_FROMDEVICE);
                        list_add_tail(&rxb->list, &rxq->rx_free);
                        rxq->free_count++;
                } else
                        list_add_tail(&rxb->list, &rxq->rx_used);

                spin_unlock_irqrestore(&rxq->lock, flags);

                i = (i + 1) & RX_QUEUE_MASK;
                /* If there are a lot of unused frames,
                 * restock the Rx queue so ucode won't assert. */
                if (fill_rx) {
                        count++;
                        if (count >= 8) {
                                rxq->read = i;
                                il3945_rx_replenish_now(il);
                                count = 0;
                        }
                }
        }

        /* Backtrack one entry */
        rxq->read = i;
        if (fill_rx)
                il3945_rx_replenish_now(il);
        else
                il3945_rx_queue_restock(il);
}

/* call this function to flush any scheduled tasklet */
static inline void
il3945_synchronize_irq(struct il_priv *il)
{
        /* wait to make sure we flush pending tasklet */
        synchronize_irq(il->pci_dev->irq);
        tasklet_kill(&il->irq_tasklet);
}

static const char *
il3945_desc_lookup(int i)
{
        switch (i) {
        case 1:
                return "FAIL";
        case 2:
                return "BAD_PARAM";
        case 3:
                return "BAD_CHECKSUM";
        case 4:
                return "NMI_INTERRUPT";
        case 5:
                return "SYSASSERT";
        case 6:
                return "FATAL_ERROR";
        }

        return "UNKNOWN";
}

#define ERROR_START_OFFSET  (1 * sizeof(u32))
#define ERROR_ELEM_SIZE     (7 * sizeof(u32))

void
il3945_dump_nic_error_log(struct il_priv *il)
{
        u32 i;
        u32 desc, time, count, base, data1;
        u32 blink1, blink2, ilink1, ilink2;

        base = le32_to_cpu(il->card_alive.error_event_table_ptr);

        if (!il3945_hw_valid_rtc_data_addr(base)) {
                IL_ERR("Not valid error log pointer 0x%08X\n", base);
                return;
        }

        count = il_read_targ_mem(il, base);

        if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
                IL_ERR("Start IWL Error Log Dump:\n");
                IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
        }

        IL_ERR("Desc       Time       asrtPC  blink2 "
               "ilink1  nmiPC   Line\n");
        for (i = ERROR_START_OFFSET;
             i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
             i += ERROR_ELEM_SIZE) {
                desc = il_read_targ_mem(il, base + i);
                time = il_read_targ_mem(il, base + i + 1 * sizeof(u32));
                blink1 = il_read_targ_mem(il, base + i + 2 * sizeof(u32));
                blink2 = il_read_targ_mem(il, base + i + 3 * sizeof(u32));
                ilink1 = il_read_targ_mem(il, base + i + 4 * sizeof(u32));
                ilink2 = il_read_targ_mem(il, base + i + 5 * sizeof(u32));
                data1 = il_read_targ_mem(il, base + i + 6 * sizeof(u32));

                IL_ERR("%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
                       il3945_desc_lookup(desc), desc, time, blink1, blink2,
                       ilink1, ilink2, data1);
        }
}

static void
il3945_irq_tasklet(struct il_priv *il)
{
        u32 inta, handled = 0;
        u32 inta_fh;
        unsigned long flags;
#ifdef CONFIG_IWLEGACY_DEBUG
        u32 inta_mask;
#endif

        spin_lock_irqsave(&il->lock, flags);

        /* Ack/clear/reset pending uCode interrupts.
         * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
         *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
        inta = _il_rd(il, CSR_INT);
        _il_wr(il, CSR_INT, inta);

        /* Ack/clear/reset pending flow-handler (DMA) interrupts.
         * Any new interrupts that happen after this, either while we're
         * in this tasklet, or later, will show up in next ISR/tasklet. */
        inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
        _il_wr(il, CSR_FH_INT_STATUS, inta_fh);

#ifdef CONFIG_IWLEGACY_DEBUG
        if (il_get_debug_level(il) & IL_DL_ISR) {
                /* just for debug */
                inta_mask = _il_rd(il, CSR_INT_MASK);
                D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
                      inta_mask, inta_fh);
        }
#endif

        spin_unlock_irqrestore(&il->lock, flags);

        /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
         * atomic, make sure that inta covers all the interrupts that
         * we've discovered, even if FH interrupt came in just after
         * reading CSR_INT. */
        if (inta_fh & CSR39_FH_INT_RX_MASK)
                inta |= CSR_INT_BIT_FH_RX;
        if (inta_fh & CSR39_FH_INT_TX_MASK)
                inta |= CSR_INT_BIT_FH_TX;

        /* Now service all interrupt bits discovered above. */
        if (inta & CSR_INT_BIT_HW_ERR) {
                IL_ERR("Hardware error detected.  Restarting.\n");

                /* Tell the device to stop sending interrupts */
                il_disable_interrupts(il);

                il->isr_stats.hw++;
                il_irq_handle_error(il);

                handled |= CSR_INT_BIT_HW_ERR;

                return;
        }
#ifdef CONFIG_IWLEGACY_DEBUG
        if (il_get_debug_level(il) & (IL_DL_ISR)) {
                /* NIC fires this, but we don't use it, redundant with WAKEUP */
                if (inta & CSR_INT_BIT_SCD) {
                        D_ISR("Scheduler finished to transmit "
                              "the frame/frames.\n");
                        il->isr_stats.sch++;
                }

                /* Alive notification via Rx interrupt will do the real work */
                if (inta & CSR_INT_BIT_ALIVE) {
                        D_ISR("Alive interrupt\n");
                        il->isr_stats.alive++;
                }
        }
#endif
        /* Safely ignore these bits for debug checks below */
        inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);

        /* Error detected by uCode */
        if (inta & CSR_INT_BIT_SW_ERR) {
                IL_ERR("Microcode SW error detected. " "Restarting 0x%X.\n",
                       inta);
                il->isr_stats.sw++;
                il_irq_handle_error(il);
                handled |= CSR_INT_BIT_SW_ERR;
        }

        /* uCode wakes up after power-down sleep */
        if (inta & CSR_INT_BIT_WAKEUP) {
                D_ISR("Wakeup interrupt\n");
                il_rx_queue_update_write_ptr(il, &il->rxq);
                il_txq_update_write_ptr(il, &il->txq[0]);
                il_txq_update_write_ptr(il, &il->txq[1]);
                il_txq_update_write_ptr(il, &il->txq[2]);
                il_txq_update_write_ptr(il, &il->txq[3]);
                il_txq_update_write_ptr(il, &il->txq[4]);
                il_txq_update_write_ptr(il, &il->txq[5]);

                il->isr_stats.wakeup++;
                handled |= CSR_INT_BIT_WAKEUP;
        }

        /* All uCode command responses, including Tx command responses,
         * Rx "responses" (frame-received notification), and other
         * notifications from uCode come through here*/
        if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
                il3945_rx_handle(il);
                il->isr_stats.rx++;
                handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
        }

        if (inta & CSR_INT_BIT_FH_TX) {
                D_ISR("Tx interrupt\n");
                il->isr_stats.tx++;

                _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
                il_wr(il, FH39_TCSR_CREDIT(FH39_SRVC_CHNL), 0x0);
                handled |= CSR_INT_BIT_FH_TX;
        }

        if (inta & ~handled) {
                IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
                il->isr_stats.unhandled++;
        }

        if (inta & ~il->inta_mask) {
                IL_WARN("Disabled INTA bits 0x%08x were pending\n",
                        inta & ~il->inta_mask);
                IL_WARN("   with inta_fh = 0x%08x\n", inta_fh);
        }

        /* Re-enable all interrupts */
        /* only Re-enable if disabled by irq */
        if (test_bit(S_INT_ENABLED, &il->status))
                il_enable_interrupts(il);

#ifdef CONFIG_IWLEGACY_DEBUG
        if (il_get_debug_level(il) & (IL_DL_ISR)) {
                inta = _il_rd(il, CSR_INT);
                inta_mask = _il_rd(il, CSR_INT_MASK);
                inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
                D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
                      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
        }
#endif
}

static int
il3945_get_channels_for_scan(struct il_priv *il, enum ieee80211_band band,
                             u8 is_active, u8 n_probes,
                             struct il3945_scan_channel *scan_ch,
                             struct ieee80211_vif *vif)
{
        struct ieee80211_channel *chan;
        const struct ieee80211_supported_band *sband;
        const struct il_channel_info *ch_info;
        u16 passive_dwell = 0;
        u16 active_dwell = 0;
        int added, i;

        sband = il_get_hw_mode(il, band);
        if (!sband)
                return 0;

        active_dwell = il_get_active_dwell_time(il, band, n_probes);
        passive_dwell = il_get_passive_dwell_time(il, band, vif);

        if (passive_dwell <= active_dwell)
                passive_dwell = active_dwell + 1;

        for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
                chan = il->scan_request->channels[i];

                if (chan->band != band)
                        continue;

                scan_ch->channel = chan->hw_value;

                ch_info = il_get_channel_info(il, band, scan_ch->channel);
                if (!il_is_channel_valid(ch_info)) {
                        D_SCAN("Channel %d is INVALID for this band.\n",
                               scan_ch->channel);
                        continue;
                }

                scan_ch->active_dwell = cpu_to_le16(active_dwell);
                scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
                /* If passive , set up for auto-switch
                 *  and use long active_dwell time.
                 */
                if (!is_active || il_is_channel_passive(ch_info) ||
                    (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
                        scan_ch->type = 0;      /* passive */
                        if (IL_UCODE_API(il->ucode_ver) == 1)
                                scan_ch->active_dwell =
                                    cpu_to_le16(passive_dwell - 1);
                } else {
                        scan_ch->type = 1;      /* active */
                }

                /* Set direct probe bits. These may be used both for active
                 * scan channels (probes gets sent right away),
                 * or for passive channels (probes get se sent only after
                 * hearing clear Rx packet).*/
                if (IL_UCODE_API(il->ucode_ver) >= 2) {
                        if (n_probes)
                                scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
                } else {
                        /* uCode v1 does not allow setting direct probe bits on
                         * passive channel. */
                        if ((scan_ch->type & 1) && n_probes)
                                scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
                }

                /* Set txpower levels to defaults */
                scan_ch->tpc.dsp_atten = 110;
                /* scan_pwr_info->tpc.dsp_atten; */

                /*scan_pwr_info->tpc.tx_gain; */
                if (band == IEEE80211_BAND_5GHZ)
                        scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
                else {
                        scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
                        /* NOTE: if we were doing 6Mb OFDM for scans we'd use
                         * power level:
                         * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
                         */
                }

                D_SCAN("Scanning %d [%s %d]\n", scan_ch->channel,
                       (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
                       (scan_ch->type & 1) ? active_dwell : passive_dwell);

                scan_ch++;
                added++;
        }

        D_SCAN("total channels to scan %d\n", added);
        return added;
}

static void
il3945_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
{
        int i;

        for (i = 0; i < RATE_COUNT_LEGACY; i++) {
                rates[i].bitrate = il3945_rates[i].ieee * 5;
                rates[i].hw_value = i;  /* Rate scaling will work on idxes */
                rates[i].hw_value_short = i;
                rates[i].flags = 0;
                if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
                        /*
                         * If CCK != 1M then set short preamble rate flag.
                         */
                        rates[i].flags |=
                            (il3945_rates[i].plcp ==
                             10) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
                }
        }
}

/******************************************************************************
 *
 * uCode download functions
 *
 ******************************************************************************/

static void
il3945_dealloc_ucode_pci(struct il_priv *il)
{
        il_free_fw_desc(il->pci_dev, &il->ucode_code);
        il_free_fw_desc(il->pci_dev, &il->ucode_data);
        il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
        il_free_fw_desc(il->pci_dev, &il->ucode_init);
        il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
        il_free_fw_desc(il->pci_dev, &il->ucode_boot);
}

/**
 * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
 *     looking at all data.
 */
static int
il3945_verify_inst_full(struct il_priv *il, __le32 * image, u32 len)
{
        u32 val;
        u32 save_len = len;
        int rc = 0;
        u32 errcnt;

        D_INFO("ucode inst image size is %u\n", len);

        il_wr(il, HBUS_TARG_MEM_RADDR, IL39_RTC_INST_LOWER_BOUND);

        errcnt = 0;
        for (; len > 0; len -= sizeof(u32), image++) {
                /* read data comes through single port, auto-incr addr */
                /* NOTE: Use the debugless read so we don't flood kernel log
                 * if IL_DL_IO is set */
                val = _il_rd(il, HBUS_TARG_MEM_RDAT);
                if (val != le32_to_cpu(*image)) {
                        IL_ERR("uCode INST section is invalid at "
                               "offset 0x%x, is 0x%x, s/b 0x%x\n",
                               save_len - len, val, le32_to_cpu(*image));
                        rc = -EIO;
                        errcnt++;
                        if (errcnt >= 20)
                                break;
                }
        }

        if (!errcnt)
                D_INFO("ucode image in INSTRUCTION memory is good\n");

        return rc;
}

/**
 * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
 *   using sample data 100 bytes apart.  If these sample points are good,
 *   it's a pretty good bet that everything between them is good, too.
 */
static int
il3945_verify_inst_sparse(struct il_priv *il, __le32 * image, u32 len)
{
        u32 val;
        int rc = 0;
        u32 errcnt = 0;
        u32 i;

        D_INFO("ucode inst image size is %u\n", len);

        for (i = 0; i < len; i += 100, image += 100 / sizeof(u32)) {
                /* read data comes through single port, auto-incr addr */
                /* NOTE: Use the debugless read so we don't flood kernel log
                 * if IL_DL_IO is set */
                il_wr(il, HBUS_TARG_MEM_RADDR, i + IL39_RTC_INST_LOWER_BOUND);
                val = _il_rd(il, HBUS_TARG_MEM_RDAT);
                if (val != le32_to_cpu(*image)) {
#if 0                           /* Enable this if you want to see details */
                        IL_ERR("uCode INST section is invalid at "
                               "offset 0x%x, is 0x%x, s/b 0x%x\n", i, val,
                               *image);
#endif
                        rc = -EIO;
                        errcnt++;
                        if (errcnt >= 3)
                                break;
                }
        }

        return rc;
}

/**
 * il3945_verify_ucode - determine which instruction image is in SRAM,
 *    and verify its contents
 */
static int
il3945_verify_ucode(struct il_priv *il)
{
        __le32 *image;
        u32 len;
        int rc = 0;

        /* Try bootstrap */
        image = (__le32 *) il->ucode_boot.v_addr;
        len = il->ucode_boot.len;
        rc = il3945_verify_inst_sparse(il, image, len);
        if (rc == 0) {
                D_INFO("Bootstrap uCode is good in inst SRAM\n");
                return 0;
        }

        /* Try initialize */
        image = (__le32 *) il->ucode_init.v_addr;
        len = il->ucode_init.len;
        rc = il3945_verify_inst_sparse(il, image, len);
        if (rc == 0) {
                D_INFO("Initialize uCode is good in inst SRAM\n");
                return 0;
        }

        /* Try runtime/protocol */
        image = (__le32 *) il->ucode_code.v_addr;
        len = il->ucode_code.len;
        rc = il3945_verify_inst_sparse(il, image, len);
        if (rc == 0) {
                D_INFO("Runtime uCode is good in inst SRAM\n");
                return 0;
        }

        IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");

        /* Since nothing seems to match, show first several data entries in
         * instruction SRAM, so maybe visual inspection will give a clue.
         * Selection of bootstrap image (vs. other images) is arbitrary. */
        image = (__le32 *) il->ucode_boot.v_addr;
        len = il->ucode_boot.len;
        rc = il3945_verify_inst_full(il, image, len);

        return rc;
}

static void
il3945_nic_start(struct il_priv *il)
{
        /* Remove all resets to allow NIC to operate */
        _il_wr(il, CSR_RESET, 0);
}

#define IL3945_UCODE_GET(item)                                          \
static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
{                                                                       \
        return le32_to_cpu(ucode->v1.item);                             \
}

static u32
il3945_ucode_get_header_size(u32 api_ver)
{
        return 24;
}

static u8 *
il3945_ucode_get_data(const struct il_ucode_header *ucode)
{
        return (u8 *) ucode->v1.data;
}

IL3945_UCODE_GET(inst_size);
IL3945_UCODE_GET(data_size);
IL3945_UCODE_GET(init_size);
IL3945_UCODE_GET(init_data_size);
IL3945_UCODE_GET(boot_size);

/**
 * il3945_read_ucode - Read uCode images from disk file.
 *
 * Copy into buffers for card to fetch via bus-mastering
 */
static int
il3945_read_ucode(struct il_priv *il)
{
        const struct il_ucode_header *ucode;
        int ret = -EINVAL, idx;
        const struct firmware *ucode_raw;
        /* firmware file name contains uCode/driver compatibility version */
        const char *name_pre = il->cfg->fw_name_pre;
        const unsigned int api_max = il->cfg->ucode_api_max;
        const unsigned int api_min = il->cfg->ucode_api_min;
        char buf[25];
        u8 *src;
        size_t len;
        u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;

        /* Ask kernel firmware_class module to get the boot firmware off disk.
         * request_firmware() is synchronous, file is in memory on return. */
        for (idx = api_max; idx >= api_min; idx--) {
                sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
                ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
                if (ret < 0) {
                        IL_ERR("%s firmware file req failed: %d\n", buf, ret);
                        if (ret == -ENOENT)
                                continue;
                        else
                                goto error;
                } else {
                        if (idx < api_max)
                                IL_ERR("Loaded firmware %s, "
                                       "which is deprecated. "
                                       " Please use API v%u instead.\n", buf,
                                       api_max);
                        D_INFO("Got firmware '%s' file "
                               "(%zd bytes) from disk\n", buf, ucode_raw->size);
                        break;
                }
        }

        if (ret < 0)
                goto error;

        /* Make sure that we got at least our header! */
        if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
                IL_ERR("File size way too small!\n");
                ret = -EINVAL;
                goto err_release;
        }

        /* Data from ucode file:  header followed by uCode images */
        ucode = (struct il_ucode_header *)ucode_raw->data;

        il->ucode_ver = le32_to_cpu(ucode->ver);
        api_ver = IL_UCODE_API(il->ucode_ver);
        inst_size = il3945_ucode_get_inst_size(ucode);
        data_size = il3945_ucode_get_data_size(ucode);
        init_size = il3945_ucode_get_init_size(ucode);
        init_data_size = il3945_ucode_get_init_data_size(ucode);
        boot_size = il3945_ucode_get_boot_size(ucode);
        src = il3945_ucode_get_data(ucode);

        /* api_ver should match the api version forming part of the
         * firmware filename ... but we don't check for that and only rely
         * on the API version read from firmware header from here on forward */

        if (api_ver < api_min || api_ver > api_max) {
                IL_ERR("Driver unable to support your firmware API. "
                       "Driver supports v%u, firmware is v%u.\n", api_max,
                       api_ver);
                il->ucode_ver = 0;
                ret = -EINVAL;
                goto err_release;
        }
        if (api_ver != api_max)
                IL_ERR("Firmware has old API version. Expected %u, "
                       "got %u. New firmware can be obtained "
                       "from http://www.intellinuxwireless.org.\n", api_max,
                       api_ver);

        IL_INFO("loaded firmware version %u.%u.%u.%u\n",
                IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
                IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));

        snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
                 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
                 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
                 IL_UCODE_SERIAL(il->ucode_ver));

        D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
        D_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
        D_INFO("f/w package hdr runtime data size = %u\n", data_size);
        D_INFO("f/w package hdr init inst size = %u\n", init_size);
        D_INFO("f/w package hdr init data size = %u\n", init_data_size);
        D_INFO("f/w package hdr boot inst size = %u\n", boot_size);

        /* Verify size of file vs. image size info in file's header */
        if (ucode_raw->size !=
            il3945_ucode_get_header_size(api_ver) + inst_size + data_size +
            init_size + init_data_size + boot_size) {

                D_INFO("uCode file size %zd does not match expected size\n",
                       ucode_raw->size);
                ret = -EINVAL;
                goto err_release;
        }

        /* Verify that uCode images will fit in card's SRAM */
        if (inst_size > IL39_MAX_INST_SIZE) {
                D_INFO("uCode instr len %d too large to fit in\n", inst_size);
                ret = -EINVAL;
                goto err_release;
        }

        if (data_size > IL39_MAX_DATA_SIZE) {
                D_INFO("uCode data len %d too large to fit in\n", data_size);
                ret = -EINVAL;
                goto err_release;
        }
        if (init_size > IL39_MAX_INST_SIZE) {
                D_INFO("uCode init instr len %d too large to fit in\n",
                       init_size);
                ret = -EINVAL;
                goto err_release;
        }
        if (init_data_size > IL39_MAX_DATA_SIZE) {
                D_INFO("uCode init data len %d too large to fit in\n",
                       init_data_size);
                ret = -EINVAL;
                goto err_release;
        }
        if (boot_size > IL39_MAX_BSM_SIZE) {
                D_INFO("uCode boot instr len %d too large to fit in\n",
                       boot_size);
                ret = -EINVAL;
                goto err_release;
        }

        /* Allocate ucode buffers for card's bus-master loading ... */

        /* Runtime instructions and 2 copies of data:
         * 1) unmodified from disk
         * 2) backup cache for save/restore during power-downs */
        il->ucode_code.len = inst_size;
        il_alloc_fw_desc(il->pci_dev, &il->ucode_code);

        il->ucode_data.len = data_size;
        il_alloc_fw_desc(il->pci_dev, &il->ucode_data);

        il->ucode_data_backup.len = data_size;
        il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);

        if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
            !il->ucode_data_backup.v_addr)
                goto err_pci_alloc;

        /* Initialization instructions and data */
        if (init_size && init_data_size) {
                il->ucode_init.len = init_size;
                il_alloc_fw_desc(il->pci_dev, &il->ucode_init);

                il->ucode_init_data.len = init_data_size;
                il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);

                if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
                        goto err_pci_alloc;
        }

        /* Bootstrap (instructions only, no data) */
        if (boot_size) {
                il->ucode_boot.len = boot_size;
                il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);

                if (!il->ucode_boot.v_addr)
                        goto err_pci_alloc;
        }

        /* Copy images into buffers for card's bus-master reads ... */

        /* Runtime instructions (first block of data in file) */
        len = inst_size;
        D_INFO("Copying (but not loading) uCode instr len %zd\n", len);
        memcpy(il->ucode_code.v_addr, src, len);
        src += len;

        D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
               il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);

        /* Runtime data (2nd block)
         * NOTE:  Copy into backup buffer will be done in il3945_up()  */
        len = data_size;
        D_INFO("Copying (but not loading) uCode data len %zd\n", len);
        memcpy(il->ucode_data.v_addr, src, len);
        memcpy(il->ucode_data_backup.v_addr, src, len);
        src += len;

        /* Initialization instructions (3rd block) */
        if (init_size) {
                len = init_size;
                D_INFO("Copying (but not loading) init instr len %zd\n", len);
                memcpy(il->ucode_init.v_addr, src, len);
                src += len;
        }

        /* Initialization data (4th block) */
        if (init_data_size) {
                len = init_data_size;
                D_INFO("Copying (but not loading) init data len %zd\n", len);
                memcpy(il->ucode_init_data.v_addr, src, len);
                src += len;
        }

        /* Bootstrap instructions (5th block) */
        len = boot_size;
        D_INFO("Copying (but not loading) boot instr len %zd\n", len);
        memcpy(il->ucode_boot.v_addr, src, len);

        /* We have our copies now, allow OS release its copies */
        release_firmware(ucode_raw);
        return 0;

err_pci_alloc:
        IL_ERR("failed to allocate pci memory\n");
        ret = -ENOMEM;
        il3945_dealloc_ucode_pci(il);

err_release:
        release_firmware(ucode_raw);

error:
        return ret;
}

/**
 * il3945_set_ucode_ptrs - Set uCode address location
 *
 * Tell initialization uCode where to find runtime uCode.
 *
 * BSM registers initially contain pointers to initialization uCode.
 * We need to replace them to load runtime uCode inst and data,
 * and to save runtime data when powering down.
 */
static int
il3945_set_ucode_ptrs(struct il_priv *il)
{
        dma_addr_t pinst;
        dma_addr_t pdata;

        /* bits 31:0 for 3945 */
        pinst = il->ucode_code.p_addr;
        pdata = il->ucode_data_backup.p_addr;

        /* Tell bootstrap uCode where to find image to load */
        il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
        il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
        il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, il->ucode_data.len);

        /* Inst byte count must be last to set up, bit 31 signals uCode
         *   that all new ptr/size info is in place */
        il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
                   il->ucode_code.len | BSM_DRAM_INST_LOAD);

        D_INFO("Runtime uCode pointers are set.\n");

        return 0;
}

/**
 * il3945_init_alive_start - Called after N_ALIVE notification received
 *
 * Called after N_ALIVE notification received from "initialize" uCode.
 *
 * Tell "initialize" uCode to go ahead and load the runtime uCode.
 */
static void
il3945_init_alive_start(struct il_priv *il)
{
        /* Check alive response for "valid" sign from uCode */
        if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
                /* We had an error bringing up the hardware, so take it
                 * all the way back down so we can try again */
                D_INFO("Initialize Alive failed.\n");
                goto restart;
        }

        /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
         * This is a paranoid check, because we would not have gotten the
         * "initialize" alive if code weren't properly loaded.  */
        if (il3945_verify_ucode(il)) {
                /* Runtime instruction load was bad;
                 * take it all the way back down so we can try again */
                D_INFO("Bad \"initialize\" uCode load.\n");
                goto restart;
        }

        /* Send pointers to protocol/runtime uCode image ... init code will
         * load and launch runtime uCode, which will send us another "Alive"
         * notification. */
        D_INFO("Initialization Alive received.\n");
        if (il3945_set_ucode_ptrs(il)) {
                /* Runtime instruction load won't happen;
                 * take it all the way back down so we can try again */
                D_INFO("Couldn't set up uCode pointers.\n");
                goto restart;
        }
        return;

restart:
        queue_work(il->workqueue, &il->restart);
}

/**
 * il3945_alive_start - called after N_ALIVE notification received
 *                   from protocol/runtime uCode (initialization uCode's
 *                   Alive gets handled by il3945_init_alive_start()).
 */
static void
il3945_alive_start(struct il_priv *il)
{
        int thermal_spin = 0;
        u32 rfkill;

        D_INFO("Runtime Alive received.\n");

        if (il->card_alive.is_valid != UCODE_VALID_OK) {
                /* We had an error bringing up the hardware, so take it
                 * all the way back down so we can try again */
                D_INFO("Alive failed.\n");
                goto restart;
        }

        /* Initialize uCode has loaded Runtime uCode ... verify inst image.
         * This is a paranoid check, because we would not have gotten the
         * "runtime" alive if code weren't properly loaded.  */
        if (il3945_verify_ucode(il)) {
                /* Runtime instruction load was bad;
                 * take it all the way back down so we can try again */
                D_INFO("Bad runtime uCode load.\n");
                goto restart;
        }

        rfkill = il_rd_prph(il, APMG_RFKILL_REG);
        D_INFO("RFKILL status: 0x%x\n", rfkill);

        if (rfkill & 0x1) {
                clear_bit(S_RFKILL, &il->status);
                /* if RFKILL is not on, then wait for thermal
                 * sensor in adapter to kick in */
                while (il3945_hw_get_temperature(il) == 0) {
                        thermal_spin++;
                        udelay(10);
                }

                if (thermal_spin)
                        D_INFO("Thermal calibration took %dus\n",
                               thermal_spin * 10);
        } else
                set_bit(S_RFKILL, &il->status);

        /* After the ALIVE response, we can send commands to 3945 uCode */
        set_bit(S_ALIVE, &il->status);

        /* Enable watchdog to monitor the driver tx queues */
        il_setup_watchdog(il);

        if (il_is_rfkill(il))
                return;

        ieee80211_wake_queues(il->hw);

        il->active_rate = RATES_MASK_3945;

        il_power_update_mode(il, true);

        if (il_is_associated(il)) {
                struct il3945_rxon_cmd *active_rxon =
                    (struct il3945_rxon_cmd *)(&il->active);

                il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
                active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
        } else {
                /* Initialize our rx_config data */
                il_connection_init_rx_config(il);
        }

        /* Configure Bluetooth device coexistence support */
        il_send_bt_config(il);

        set_bit(S_READY, &il->status);

        /* Configure the adapter for unassociated operation */
        il3945_commit_rxon(il);

        il3945_reg_txpower_periodic(il);

        D_INFO("ALIVE processing complete.\n");
        wake_up(&il->wait_command_queue);

        return;

restart:
        queue_work(il->workqueue, &il->restart);
}

static void il3945_cancel_deferred_work(struct il_priv *il);

static void
__il3945_down(struct il_priv *il)
{
        unsigned long flags;
        int exit_pending;

        D_INFO(DRV_NAME " is going down\n");

        il_scan_cancel_timeout(il, 200);

        exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);

        /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
         * to prevent rearm timer */
        del_timer_sync(&il->watchdog);

        /* Station information will now be cleared in device */
        il_clear_ucode_stations(il);
        il_dealloc_bcast_stations(il);
        il_clear_driver_stations(il);

        /* Unblock any waiting calls */
        wake_up_all(&il->wait_command_queue);

        /* Wipe out the EXIT_PENDING status bit if we are not actually
         * exiting the module */
        if (!exit_pending)
                clear_bit(S_EXIT_PENDING, &il->status);

        /* stop and reset the on-board processor */
        _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);

        /* tell the device to stop sending interrupts */
        spin_lock_irqsave(&il->lock, flags);
        il_disable_interrupts(il);
        spin_unlock_irqrestore(&il->lock, flags);
        il3945_synchronize_irq(il);

        if (il->mac80211_registered)
                ieee80211_stop_queues(il->hw);

        /* If we have not previously called il3945_init() then
         * clear all bits but the RF Kill bits and return */
        if (!il_is_init(il)) {
                il->status =
                    test_bit(S_RFKILL, &il->status) << S_RFKILL |
                    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
                    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
                goto exit;
        }

        /* ...otherwise clear out all the status bits but the RF Kill
         * bit and continue taking the NIC down. */
        il->status &=
            test_bit(S_RFKILL, &il->status) << S_RFKILL |
            test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
            test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
            test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;

        /*
         * We disabled and synchronized interrupt, and priv->mutex is taken, so
         * here is the only thread which will program device registers, but
         * still have lockdep assertions, so we are taking reg_lock.
         */
        spin_lock_irq(&il->reg_lock);
        /* FIXME: il_grab_nic_access if rfkill is off ? */

        il3945_hw_txq_ctx_stop(il);
        il3945_hw_rxq_stop(il);
        /* Power-down device's busmaster DMA clocks */
        _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
        udelay(5);
        /* Stop the device, and put it in low power state */
        _il_apm_stop(il);

        spin_unlock_irq(&il->reg_lock);

        il3945_hw_txq_ctx_free(il);
exit:
        memset(&il->card_alive, 0, sizeof(struct il_alive_resp));

        if (il->beacon_skb)
                dev_kfree_skb(il->beacon_skb);
        il->beacon_skb = NULL;

        /* clear out any free frames */
        il3945_clear_free_frames(il);
}

static void
il3945_down(struct il_priv *il)
{
        mutex_lock(&il->mutex);
        __il3945_down(il);
        mutex_unlock(&il->mutex);

        il3945_cancel_deferred_work(il);
}

#define MAX_HW_RESTARTS 5

static int
il3945_alloc_bcast_station(struct il_priv *il)
{
        unsigned long flags;
        u8 sta_id;

        spin_lock_irqsave(&il->sta_lock, flags);
        sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
        if (sta_id == IL_INVALID_STATION) {
                IL_ERR("Unable to prepare broadcast station\n");
                spin_unlock_irqrestore(&il->sta_lock, flags);

                return -EINVAL;
        }

        il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
        il->stations[sta_id].used |= IL_STA_BCAST;
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return 0;
}

static int
__il3945_up(struct il_priv *il)
{
        int rc, i;

        rc = il3945_alloc_bcast_station(il);
        if (rc)
                return rc;

        if (test_bit(S_EXIT_PENDING, &il->status)) {
                IL_WARN("Exit pending; will not bring the NIC up\n");
                return -EIO;
        }

        if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
                IL_ERR("ucode not available for device bring up\n");
                return -EIO;
        }

        /* If platform's RF_KILL switch is NOT set to KILL */
        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
                clear_bit(S_RFKILL, &il->status);
        else {
                set_bit(S_RFKILL, &il->status);
                IL_WARN("Radio disabled by HW RF Kill switch\n");
                return -ENODEV;
        }

        _il_wr(il, CSR_INT, 0xFFFFFFFF);

        rc = il3945_hw_nic_init(il);
        if (rc) {
                IL_ERR("Unable to int nic\n");
                return rc;
        }

        /* make sure rfkill handshake bits are cleared */
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);

        /* clear (again), then enable host interrupts */
        _il_wr(il, CSR_INT, 0xFFFFFFFF);
        il_enable_interrupts(il);

        /* really make sure rfkill handshake bits are cleared */
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);

        /* Copy original ucode data image from disk into backup cache.
         * This will be used to initialize the on-board processor's
         * data SRAM for a clean start when the runtime program first loads. */
        memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
               il->ucode_data.len);

        /* We return success when we resume from suspend and rf_kill is on. */
        if (test_bit(S_RFKILL, &il->status))
                return 0;

        for (i = 0; i < MAX_HW_RESTARTS; i++) {

                /* load bootstrap state machine,
                 * load bootstrap program into processor's memory,
                 * prepare to load the "initialize" uCode */
                rc = il->ops->load_ucode(il);

                if (rc) {
                        IL_ERR("Unable to set up bootstrap uCode: %d\n", rc);
                        continue;
                }

                /* start card; "initialize" will load runtime ucode */
                il3945_nic_start(il);

                D_INFO(DRV_NAME " is coming up\n");

                return 0;
        }

        set_bit(S_EXIT_PENDING, &il->status);
        __il3945_down(il);
        clear_bit(S_EXIT_PENDING, &il->status);

        /* tried to restart and config the device for as long as our
         * patience could withstand */
        IL_ERR("Unable to initialize device after %d attempts.\n", i);
        return -EIO;
}

/*****************************************************************************
 *
 * Workqueue callbacks
 *
 *****************************************************************************/

static void
il3945_bg_init_alive_start(struct work_struct *data)
{
        struct il_priv *il =
            container_of(data, struct il_priv, init_alive_start.work);

        mutex_lock(&il->mutex);
        if (test_bit(S_EXIT_PENDING, &il->status))
                goto out;

        il3945_init_alive_start(il);
out:
        mutex_unlock(&il->mutex);
}

static void
il3945_bg_alive_start(struct work_struct *data)
{
        struct il_priv *il =
            container_of(data, struct il_priv, alive_start.work);

        mutex_lock(&il->mutex);
        if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
                goto out;

        il3945_alive_start(il);
out:
        mutex_unlock(&il->mutex);
}

/*
 * 3945 cannot interrupt driver when hardware rf kill switch toggles;
 * driver must poll CSR_GP_CNTRL_REG register for change.  This register
 * *is* readable even when device has been SW_RESET into low power mode
 * (e.g. during RF KILL).
 */
static void
il3945_rfkill_poll(struct work_struct *data)
{
        struct il_priv *il =
            container_of(data, struct il_priv, _3945.rfkill_poll.work);
        bool old_rfkill = test_bit(S_RFKILL, &il->status);
        bool new_rfkill =
            !(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);

        if (new_rfkill != old_rfkill) {
                if (new_rfkill)
                        set_bit(S_RFKILL, &il->status);
                else
                        clear_bit(S_RFKILL, &il->status);

                wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);

                D_RF_KILL("RF_KILL bit toggled to %s.\n",
                          new_rfkill ? "disable radio" : "enable radio");
        }

        /* Keep this running, even if radio now enabled.  This will be
         * cancelled in mac_start() if system decides to start again */
        queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
                           round_jiffies_relative(2 * HZ));

}

int
il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
{
        struct il_host_cmd cmd = {
                .id = C_SCAN,
                .len = sizeof(struct il3945_scan_cmd),
                .flags = CMD_SIZE_HUGE,
        };
        struct il3945_scan_cmd *scan;
        u8 n_probes = 0;
        enum ieee80211_band band;
        bool is_active = false;
        int ret;
        u16 len;

        lockdep_assert_held(&il->mutex);

        if (!il->scan_cmd) {
                il->scan_cmd =
                    kmalloc(sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE,
                            GFP_KERNEL);
                if (!il->scan_cmd) {
                        D_SCAN("Fail to allocate scan memory\n");
                        return -ENOMEM;
                }
        }
        scan = il->scan_cmd;
        memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);

        scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
        scan->quiet_time = IL_ACTIVE_QUIET_TIME;

        if (il_is_associated(il)) {
                u16 interval;
                u32 extra;
                u32 suspend_time = 100;
                u32 scan_suspend_time = 100;

                D_INFO("Scanning while associated...\n");

                interval = vif->bss_conf.beacon_int;

                scan->suspend_time = 0;
                scan->max_out_time = cpu_to_le32(200 * 1024);
                if (!interval)
                        interval = suspend_time;
                /*
                 * suspend time format:
                 *  0-19: beacon interval in usec (time before exec.)
                 * 20-23: 0
                 * 24-31: number of beacons (suspend between channels)
                 */

                extra = (suspend_time / interval) << 24;
                scan_suspend_time =
                    0xFF0FFFFF & (extra | ((suspend_time % interval) * 1024));

                scan->suspend_time = cpu_to_le32(scan_suspend_time);
                D_SCAN("suspend_time 0x%X beacon interval %d\n",
                       scan_suspend_time, interval);
        }

        if (il->scan_request->n_ssids) {
                int i, p = 0;
                D_SCAN("Kicking off active scan\n");
                for (i = 0; i < il->scan_request->n_ssids; i++) {
                        /* always does wildcard anyway */
                        if (!il->scan_request->ssids[i].ssid_len)
                                continue;
                        scan->direct_scan[p].id = WLAN_EID_SSID;
                        scan->direct_scan[p].len =
                            il->scan_request->ssids[i].ssid_len;
                        memcpy(scan->direct_scan[p].ssid,
                               il->scan_request->ssids[i].ssid,
                               il->scan_request->ssids[i].ssid_len);
                        n_probes++;
                        p++;
                }
                is_active = true;
        } else
                D_SCAN("Kicking off passive scan.\n");

        /* We don't build a direct scan probe request; the uCode will do
         * that based on the direct_mask added to each channel entry */
        scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
        scan->tx_cmd.sta_id = il->hw_params.bcast_id;
        scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;

        /* flags + rate selection */

        switch (il->scan_band) {
        case IEEE80211_BAND_2GHZ:
                scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                scan->tx_cmd.rate = RATE_1M_PLCP;
                band = IEEE80211_BAND_2GHZ;
                break;
        case IEEE80211_BAND_5GHZ:
                scan->tx_cmd.rate = RATE_6M_PLCP;
                band = IEEE80211_BAND_5GHZ;
                break;
        default:
                IL_WARN("Invalid scan band\n");
                return -EIO;
        }

        /*
         * If active scaning is requested but a certain channel is marked
         * passive, we can do active scanning if we detect transmissions. For
         * passive only scanning disable switching to active on any channel.
         */
        scan->good_CRC_th =
            is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;

        len =
            il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
                              vif->addr, il->scan_request->ie,
                              il->scan_request->ie_len,
                              IL_MAX_SCAN_SIZE - sizeof(*scan));
        scan->tx_cmd.len = cpu_to_le16(len);

        /* select Rx antennas */
        scan->flags |= il3945_get_antenna_flags(il);

        scan->channel_count =
            il3945_get_channels_for_scan(il, band, is_active, n_probes,
                                         (void *)&scan->data[len], vif);
        if (scan->channel_count == 0) {
                D_SCAN("channel count %d\n", scan->channel_count);
                return -EIO;
        }

        cmd.len +=
            le16_to_cpu(scan->tx_cmd.len) +
            scan->channel_count * sizeof(struct il3945_scan_channel);
        cmd.data = scan;
        scan->len = cpu_to_le16(cmd.len);

        set_bit(S_SCAN_HW, &il->status);
        ret = il_send_cmd_sync(il, &cmd);
        if (ret)
                clear_bit(S_SCAN_HW, &il->status);
        return ret;
}

void
il3945_post_scan(struct il_priv *il)
{
        /*
         * Since setting the RXON may have been deferred while
         * performing the scan, fire one off if needed
         */
        if (memcmp(&il->staging, &il->active, sizeof(il->staging)))
                il3945_commit_rxon(il);
}

static void
il3945_bg_restart(struct work_struct *data)
{
        struct il_priv *il = container_of(data, struct il_priv, restart);

        if (test_bit(S_EXIT_PENDING, &il->status))
                return;

        if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
                mutex_lock(&il->mutex);
                il->is_open = 0;
                mutex_unlock(&il->mutex);
                il3945_down(il);
                ieee80211_restart_hw(il->hw);
        } else {
                il3945_down(il);

                mutex_lock(&il->mutex);
                if (test_bit(S_EXIT_PENDING, &il->status)) {
                        mutex_unlock(&il->mutex);
                        return;
                }

                __il3945_up(il);
                mutex_unlock(&il->mutex);
        }
}

static void
il3945_bg_rx_replenish(struct work_struct *data)
{
        struct il_priv *il = container_of(data, struct il_priv, rx_replenish);

        mutex_lock(&il->mutex);
        if (test_bit(S_EXIT_PENDING, &il->status))
                goto out;

        il3945_rx_replenish(il);
out:
        mutex_unlock(&il->mutex);
}

void
il3945_post_associate(struct il_priv *il)
{
        int rc = 0;
        struct ieee80211_conf *conf = NULL;

        if (!il->vif || !il->is_open)
                return;

        D_ASSOC("Associated as %d to: %pM\n", il->vif->bss_conf.aid,
                il->active.bssid_addr);

        if (test_bit(S_EXIT_PENDING, &il->status))
                return;

        il_scan_cancel_timeout(il, 200);

        conf = &il->hw->conf;

        il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
        il3945_commit_rxon(il);

        rc = il_send_rxon_timing(il);
        if (rc)
                IL_WARN("C_RXON_TIMING failed - " "Attempting to continue.\n");

        il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;

        il->staging.assoc_id = cpu_to_le16(il->vif->bss_conf.aid);

        D_ASSOC("assoc id %d beacon interval %d\n", il->vif->bss_conf.aid,
                il->vif->bss_conf.beacon_int);

        if (il->vif->bss_conf.use_short_preamble)
                il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
        else
                il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;

        if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
                if (il->vif->bss_conf.use_short_slot)
                        il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
                else
                        il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
        }

        il3945_commit_rxon(il);

        switch (il->vif->type) {
        case NL80211_IFTYPE_STATION:
                il3945_rate_scale_init(il->hw, IL_AP_ID);
                break;
        case NL80211_IFTYPE_ADHOC:
                il3945_send_beacon_cmd(il);
                break;
        default:
                IL_ERR("%s Should not be called in %d mode\n", __func__,
                      il->vif->type);
                break;
        }
}

/*****************************************************************************
 *
 * mac80211 entry point functions
 *
 *****************************************************************************/

#define UCODE_READY_TIMEOUT     (2 * HZ)

static int
il3945_mac_start(struct ieee80211_hw *hw)
{
        struct il_priv *il = hw->priv;
        int ret;

        /* we should be verifying the device is ready to be opened */
        mutex_lock(&il->mutex);
        D_MAC80211("enter\n");

        /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
         * ucode filename and max sizes are card-specific. */

        if (!il->ucode_code.len) {
                ret = il3945_read_ucode(il);
                if (ret) {
                        IL_ERR("Could not read microcode: %d\n", ret);
                        mutex_unlock(&il->mutex);
                        goto out_release_irq;
                }
        }

        ret = __il3945_up(il);

        mutex_unlock(&il->mutex);

        if (ret)
                goto out_release_irq;

        D_INFO("Start UP work.\n");

        /* Wait for START_ALIVE from ucode. Otherwise callbacks from
         * mac80211 will not be run successfully. */
        ret = wait_event_timeout(il->wait_command_queue,
                                 test_bit(S_READY, &il->status),
                                 UCODE_READY_TIMEOUT);
        if (!ret) {
                if (!test_bit(S_READY, &il->status)) {
                        IL_ERR("Wait for START_ALIVE timeout after %dms.\n",
                               jiffies_to_msecs(UCODE_READY_TIMEOUT));
                        ret = -ETIMEDOUT;
                        goto out_release_irq;
                }
        }

        /* ucode is running and will send rfkill notifications,
         * no need to poll the killswitch state anymore */
        cancel_delayed_work(&il->_3945.rfkill_poll);

        il->is_open = 1;
        D_MAC80211("leave\n");
        return 0;

out_release_irq:
        il->is_open = 0;
        D_MAC80211("leave - failed\n");
        return ret;
}

static void
il3945_mac_stop(struct ieee80211_hw *hw)
{
        struct il_priv *il = hw->priv;

        D_MAC80211("enter\n");

        if (!il->is_open) {
                D_MAC80211("leave - skip\n");
                return;
        }

        il->is_open = 0;

        il3945_down(il);

        flush_workqueue(il->workqueue);

        /* start polling the killswitch state again */
        queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
                           round_jiffies_relative(2 * HZ));

        D_MAC80211("leave\n");
}

static void
il3945_mac_tx(struct ieee80211_hw *hw,
               struct ieee80211_tx_control *control,
               struct sk_buff *skb)
{
        struct il_priv *il = hw->priv;

        D_MAC80211("enter\n");

        D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
             ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);

        if (il3945_tx_skb(il, control->sta, skb))
                dev_kfree_skb_any(skb);

        D_MAC80211("leave\n");
}

void
il3945_config_ap(struct il_priv *il)
{
        struct ieee80211_vif *vif = il->vif;
        int rc = 0;

        if (test_bit(S_EXIT_PENDING, &il->status))
                return;

        /* The following should be done only at AP bring up */
        if (!(il_is_associated(il))) {

                /* RXON - unassoc (to set timing command) */
                il->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
                il3945_commit_rxon(il);

                /* RXON Timing */
                rc = il_send_rxon_timing(il);
                if (rc)
                        IL_WARN("C_RXON_TIMING failed - "
                                "Attempting to continue.\n");

                il->staging.assoc_id = 0;

                if (vif->bss_conf.use_short_preamble)
                        il->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
                else
                        il->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;

                if (il->staging.flags & RXON_FLG_BAND_24G_MSK) {
                        if (vif->bss_conf.use_short_slot)
                                il->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
                        else
                                il->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
                }
                /* restore RXON assoc */
                il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
                il3945_commit_rxon(il);
        }
        il3945_send_beacon_cmd(il);
}

static int
il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
                   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
                   struct ieee80211_key_conf *key)
{
        struct il_priv *il = hw->priv;
        int ret = 0;
        u8 sta_id = IL_INVALID_STATION;
        u8 static_key;

        D_MAC80211("enter\n");

        if (il3945_mod_params.sw_crypto) {
                D_MAC80211("leave - hwcrypto disabled\n");
                return -EOPNOTSUPP;
        }

        /*
         * To support IBSS RSN, don't program group keys in IBSS, the
         * hardware will then not attempt to decrypt the frames.
         */
        if (vif->type == NL80211_IFTYPE_ADHOC &&
            !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
                D_MAC80211("leave - IBSS RSN\n");
                return -EOPNOTSUPP;
        }

        static_key = !il_is_associated(il);

        if (!static_key) {
                sta_id = il_sta_id_or_broadcast(il, sta);
                if (sta_id == IL_INVALID_STATION) {
                        D_MAC80211("leave - station not found\n");
                        return -EINVAL;
                }
        }

        mutex_lock(&il->mutex);
        il_scan_cancel_timeout(il, 100);

        switch (cmd) {
        case SET_KEY:
                if (static_key)
                        ret = il3945_set_static_key(il, key);
                else
                        ret = il3945_set_dynamic_key(il, key, sta_id);
                D_MAC80211("enable hwcrypto key\n");
                break;
        case DISABLE_KEY:
                if (static_key)
                        ret = il3945_remove_static_key(il);
                else
                        ret = il3945_clear_sta_key_info(il, sta_id);
                D_MAC80211("disable hwcrypto key\n");
                break;
        default:
                ret = -EINVAL;
        }

        D_MAC80211("leave ret %d\n", ret);
        mutex_unlock(&il->mutex);

        return ret;
}

static int
il3945_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                   struct ieee80211_sta *sta)
{
        struct il_priv *il = hw->priv;
        struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
        int ret;
        bool is_ap = vif->type == NL80211_IFTYPE_STATION;
        u8 sta_id;

        mutex_lock(&il->mutex);
        D_INFO("station %pM\n", sta->addr);
        sta_priv->common.sta_id = IL_INVALID_STATION;

        ret = il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
        if (ret) {
                IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
                /* Should we return success if return code is EEXIST ? */
                mutex_unlock(&il->mutex);
                return ret;
        }

        sta_priv->common.sta_id = sta_id;

        /* Initialize rate scaling */
        D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
        il3945_rs_rate_init(il, sta, sta_id);
        mutex_unlock(&il->mutex);

        return 0;
}

static void
il3945_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
                        unsigned int *total_flags, u64 multicast)
{
        struct il_priv *il = hw->priv;
        __le32 filter_or = 0, filter_nand = 0;

#define CHK(test, flag) do { \
        if (*total_flags & (test))              \
                filter_or |= (flag);            \
        else                                    \
                filter_nand |= (flag);          \
        } while (0)

        D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
                   *total_flags);

        CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
        CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
        CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);

#undef CHK

        mutex_lock(&il->mutex);

        il->staging.filter_flags &= ~filter_nand;
        il->staging.filter_flags |= filter_or;

        /*
         * Not committing directly because hardware can perform a scan,
         * but even if hw is ready, committing here breaks for some reason,
         * we'll eventually commit the filter flags change anyway.
         */

        mutex_unlock(&il->mutex);

        /*
         * Receiving all multicast frames is always enabled by the
         * default flags setup in il_connection_init_rx_config()
         * since we currently do not support programming multicast
         * filters into the device.
         */
        *total_flags &=
            FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
            FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}

/*****************************************************************************
 *
 * sysfs attributes
 *
 *****************************************************************************/

#ifdef CONFIG_IWLEGACY_DEBUG

/*
 * The following adds a new attribute to the sysfs representation
 * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
 * used for controlling the debug level.
 *
 * See the level definitions in iwl for details.
 *
 * The debug_level being managed using sysfs below is a per device debug
 * level that is used instead of the global debug level if it (the per
 * device debug level) is set.
 */
static ssize_t
il3945_show_debug_level(struct device *d, struct device_attribute *attr,
                        char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);
        return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
}

static ssize_t
il3945_store_debug_level(struct device *d, struct device_attribute *attr,
                         const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        unsigned long val;
        int ret;

        ret = strict_strtoul(buf, 0, &val);
        if (ret)
                IL_INFO("%s is not in hex or decimal form.\n", buf);
        else
                il->debug_level = val;

        return strnlen(buf, count);
}

static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il3945_show_debug_level,
                   il3945_store_debug_level);

#endif /* CONFIG_IWLEGACY_DEBUG */

static ssize_t
il3945_show_temperature(struct device *d, struct device_attribute *attr,
                        char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);

        if (!il_is_alive(il))
                return -EAGAIN;

        return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
}

static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);

static ssize_t
il3945_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);
        return sprintf(buf, "%d\n", il->tx_power_user_lmt);
}

static ssize_t
il3945_store_tx_power(struct device *d, struct device_attribute *attr,
                      const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        char *p = (char *)buf;
        u32 val;

        val = simple_strtoul(p, &p, 10);
        if (p == buf)
                IL_INFO(": %s is not in decimal form.\n", buf);
        else
                il3945_hw_reg_set_txpower(il, val);

        return count;
}

static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power,
                   il3945_store_tx_power);

static ssize_t
il3945_show_flags(struct device *d, struct device_attribute *attr, char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);

        return sprintf(buf, "0x%04X\n", il->active.flags);
}

static ssize_t
il3945_store_flags(struct device *d, struct device_attribute *attr,
                   const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        u32 flags = simple_strtoul(buf, NULL, 0);

        mutex_lock(&il->mutex);
        if (le32_to_cpu(il->staging.flags) != flags) {
                /* Cancel any currently running scans... */
                if (il_scan_cancel_timeout(il, 100))
                        IL_WARN("Could not cancel scan.\n");
                else {
                        D_INFO("Committing rxon.flags = 0x%04X\n", flags);
                        il->staging.flags = cpu_to_le32(flags);
                        il3945_commit_rxon(il);
                }
        }
        mutex_unlock(&il->mutex);

        return count;
}

static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags,
                   il3945_store_flags);

static ssize_t
il3945_show_filter_flags(struct device *d, struct device_attribute *attr,
                         char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);

        return sprintf(buf, "0x%04X\n", le32_to_cpu(il->active.filter_flags));
}

static ssize_t
il3945_store_filter_flags(struct device *d, struct device_attribute *attr,
                          const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        u32 filter_flags = simple_strtoul(buf, NULL, 0);

        mutex_lock(&il->mutex);
        if (le32_to_cpu(il->staging.filter_flags) != filter_flags) {
                /* Cancel any currently running scans... */
                if (il_scan_cancel_timeout(il, 100))
                        IL_WARN("Could not cancel scan.\n");
                else {
                        D_INFO("Committing rxon.filter_flags = " "0x%04X\n",
                               filter_flags);
                        il->staging.filter_flags = cpu_to_le32(filter_flags);
                        il3945_commit_rxon(il);
                }
        }
        mutex_unlock(&il->mutex);

        return count;
}

static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
                   il3945_store_filter_flags);

static ssize_t
il3945_show_measurement(struct device *d, struct device_attribute *attr,
                        char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);
        struct il_spectrum_notification measure_report;
        u32 size = sizeof(measure_report), len = 0, ofs = 0;
        u8 *data = (u8 *) &measure_report;
        unsigned long flags;

        spin_lock_irqsave(&il->lock, flags);
        if (!(il->measurement_status & MEASUREMENT_READY)) {
                spin_unlock_irqrestore(&il->lock, flags);
                return 0;
        }
        memcpy(&measure_report, &il->measure_report, size);
        il->measurement_status = 0;
        spin_unlock_irqrestore(&il->lock, flags);

        while (size && PAGE_SIZE - len) {
                hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
                                   PAGE_SIZE - len, 1);
                len = strlen(buf);
                if (PAGE_SIZE - len)
                        buf[len++] = '\n';

                ofs += 16;
                size -= min(size, 16U);
        }

        return len;
}

static ssize_t
il3945_store_measurement(struct device *d, struct device_attribute *attr,
                         const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        struct ieee80211_measurement_params params = {
                .channel = le16_to_cpu(il->active.channel),
                .start_time = cpu_to_le64(il->_3945.last_tsf),
                .duration = cpu_to_le16(1),
        };
        u8 type = IL_MEASURE_BASIC;
        u8 buffer[32];
        u8 channel;

        if (count) {
                char *p = buffer;
                strlcpy(buffer, buf, sizeof(buffer));
                channel = simple_strtoul(p, NULL, 0);
                if (channel)
                        params.channel = channel;

                p = buffer;
                while (*p && *p != ' ')
                        p++;
                if (*p)
                        type = simple_strtoul(p + 1, NULL, 0);
        }

        D_INFO("Invoking measurement of type %d on " "channel %d (for '%s')\n",
               type, params.channel, buf);
        il3945_get_measurement(il, &params, type);

        return count;
}

static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, il3945_show_measurement,
                   il3945_store_measurement);

static ssize_t
il3945_store_retry_rate(struct device *d, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);

        il->retry_rate = simple_strtoul(buf, NULL, 0);
        if (il->retry_rate <= 0)
                il->retry_rate = 1;

        return count;
}

static ssize_t
il3945_show_retry_rate(struct device *d, struct device_attribute *attr,
                       char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);
        return sprintf(buf, "%d", il->retry_rate);
}

static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
                   il3945_store_retry_rate);

static ssize_t
il3945_show_channels(struct device *d, struct device_attribute *attr, char *buf)
{
        /* all this shit doesn't belong into sysfs anyway */
        return 0;
}

static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);

static ssize_t
il3945_show_antenna(struct device *d, struct device_attribute *attr, char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);

        if (!il_is_alive(il))
                return -EAGAIN;

        return sprintf(buf, "%d\n", il3945_mod_params.antenna);
}

static ssize_t
il3945_store_antenna(struct device *d, struct device_attribute *attr,
                     const char *buf, size_t count)
{
        struct il_priv *il __maybe_unused = dev_get_drvdata(d);
        int ant;

        if (count == 0)
                return 0;

        if (sscanf(buf, "%1i", &ant) != 1) {
                D_INFO("not in hex or decimal form.\n");
                return count;
        }

        if (ant >= 0 && ant <= 2) {
                D_INFO("Setting antenna select to %d.\n", ant);
                il3945_mod_params.antenna = (enum il3945_antenna)ant;
        } else
                D_INFO("Bad antenna select value %d.\n", ant);

        return count;
}

static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna,
                   il3945_store_antenna);

static ssize_t
il3945_show_status(struct device *d, struct device_attribute *attr, char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);
        if (!il_is_alive(il))
                return -EAGAIN;
        return sprintf(buf, "0x%08x\n", (int)il->status);
}

static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);

static ssize_t
il3945_dump_error_log(struct device *d, struct device_attribute *attr,
                      const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        char *p = (char *)buf;

        if (p[0] == '1')
                il3945_dump_nic_error_log(il);

        return strnlen(buf, count);
}

static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);

/*****************************************************************************
 *
 * driver setup and tear down
 *
 *****************************************************************************/

static void
il3945_setup_deferred_work(struct il_priv *il)
{
        il->workqueue = create_singlethread_workqueue(DRV_NAME);

        init_waitqueue_head(&il->wait_command_queue);

        INIT_WORK(&il->restart, il3945_bg_restart);
        INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
        INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
        INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
        INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);

        il_setup_scan_deferred_work(il);

        il3945_hw_setup_deferred_work(il);

        init_timer(&il->watchdog);
        il->watchdog.data = (unsigned long)il;
        il->watchdog.function = il_bg_watchdog;

        tasklet_init(&il->irq_tasklet,
                     (void (*)(unsigned long))il3945_irq_tasklet,
                     (unsigned long)il);
}

static void
il3945_cancel_deferred_work(struct il_priv *il)
{
        il3945_hw_cancel_deferred_work(il);

        cancel_delayed_work_sync(&il->init_alive_start);
        cancel_delayed_work(&il->alive_start);

        il_cancel_scan_deferred_work(il);
}

static struct attribute *il3945_sysfs_entries[] = {
        &dev_attr_antenna.attr,
        &dev_attr_channels.attr,
        &dev_attr_dump_errors.attr,
        &dev_attr_flags.attr,
        &dev_attr_filter_flags.attr,
        &dev_attr_measurement.attr,
        &dev_attr_retry_rate.attr,
        &dev_attr_status.attr,
        &dev_attr_temperature.attr,
        &dev_attr_tx_power.attr,
#ifdef CONFIG_IWLEGACY_DEBUG
        &dev_attr_debug_level.attr,
#endif
        NULL
};

static struct attribute_group il3945_attribute_group = {
        .name = NULL,           /* put in device directory */
        .attrs = il3945_sysfs_entries,
};

struct ieee80211_ops il3945_mac_ops = {
        .tx = il3945_mac_tx,
        .start = il3945_mac_start,
        .stop = il3945_mac_stop,
        .add_interface = il_mac_add_interface,
        .remove_interface = il_mac_remove_interface,
        .change_interface = il_mac_change_interface,
        .config = il_mac_config,
        .configure_filter = il3945_configure_filter,
        .set_key = il3945_mac_set_key,
        .conf_tx = il_mac_conf_tx,
        .reset_tsf = il_mac_reset_tsf,
        .bss_info_changed = il_mac_bss_info_changed,
        .hw_scan = il_mac_hw_scan,
        .sta_add = il3945_mac_sta_add,
        .sta_remove = il_mac_sta_remove,
        .tx_last_beacon = il_mac_tx_last_beacon,
};

static int
il3945_init_drv(struct il_priv *il)
{
        int ret;
        struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;

        il->retry_rate = 1;
        il->beacon_skb = NULL;

        spin_lock_init(&il->sta_lock);
        spin_lock_init(&il->hcmd_lock);

        INIT_LIST_HEAD(&il->free_frames);

        mutex_init(&il->mutex);

        il->ieee_channels = NULL;
        il->ieee_rates = NULL;
        il->band = IEEE80211_BAND_2GHZ;

        il->iw_mode = NL80211_IFTYPE_STATION;
        il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;

        /* initialize force reset */
        il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;

        if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
                IL_WARN("Unsupported EEPROM version: 0x%04X\n",
                        eeprom->version);
                ret = -EINVAL;
                goto err;
        }
        ret = il_init_channel_map(il);
        if (ret) {
                IL_ERR("initializing regulatory failed: %d\n", ret);
                goto err;
        }

        /* Set up txpower settings in driver for all channels */
        if (il3945_txpower_set_from_eeprom(il)) {
                ret = -EIO;
                goto err_free_channel_map;
        }

        ret = il_init_geos(il);
        if (ret) {
                IL_ERR("initializing geos failed: %d\n", ret);
                goto err_free_channel_map;
        }
        il3945_init_hw_rates(il, il->ieee_rates);

        return 0;

err_free_channel_map:
        il_free_channel_map(il);
err:
        return ret;
}

#define IL3945_MAX_PROBE_REQUEST        200

static int
il3945_setup_mac(struct il_priv *il)
{
        int ret;
        struct ieee80211_hw *hw = il->hw;

        hw->rate_control_algorithm = "iwl-3945-rs";
        hw->sta_data_size = sizeof(struct il3945_sta_priv);
        hw->vif_data_size = sizeof(struct il_vif_priv);

        /* Tell mac80211 our characteristics */
        hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT;

        hw->wiphy->interface_modes =
            BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);

        hw->wiphy->flags |=
            WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS |
            WIPHY_FLAG_IBSS_RSN;

        hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
        /* we create the 802.11 header and a zero-length SSID element */
        hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;

        /* Default value; 4 EDCA QOS priorities */
        hw->queues = 4;

        if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
                il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
                    &il->bands[IEEE80211_BAND_2GHZ];

        if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
                il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
                    &il->bands[IEEE80211_BAND_5GHZ];

        il_leds_init(il);

        ret = ieee80211_register_hw(il->hw);
        if (ret) {
                IL_ERR("Failed to register hw (error %d)\n", ret);
                return ret;
        }
        il->mac80211_registered = 1;

        return 0;
}

static int
il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        int err = 0;
        struct il_priv *il;
        struct ieee80211_hw *hw;
        struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
        struct il3945_eeprom *eeprom;
        unsigned long flags;

        /***********************
         * 1. Allocating HW data
         * ********************/

        hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il3945_mac_ops);
        if (!hw) {
                err = -ENOMEM;
                goto out;
        }
        il = hw->priv;
        il->hw = hw;
        SET_IEEE80211_DEV(hw, &pdev->dev);

        il->cmd_queue = IL39_CMD_QUEUE_NUM;

        /*
         * Disabling hardware scan means that mac80211 will perform scans
         * "the hard way", rather than using device's scan.
         */
        if (il3945_mod_params.disable_hw_scan) {
                D_INFO("Disabling hw_scan\n");
                il3945_mac_ops.hw_scan = NULL;
        }

        D_INFO("*** LOAD DRIVER ***\n");
        il->cfg = cfg;
        il->ops = &il3945_ops;
#ifdef CONFIG_IWLEGACY_DEBUGFS
        il->debugfs_ops = &il3945_debugfs_ops;
#endif
        il->pci_dev = pdev;
        il->inta_mask = CSR_INI_SET_MASK;

        /***************************
         * 2. Initializing PCI bus
         * *************************/
        pci_disable_link_state(pdev,
                               PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
                               PCIE_LINK_STATE_CLKPM);

        if (pci_enable_device(pdev)) {
                err = -ENODEV;
                goto out_ieee80211_free_hw;
        }

        pci_set_master(pdev);

        err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
        if (!err)
                err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
        if (err) {
                IL_WARN("No suitable DMA available.\n");
                goto out_pci_disable_device;
        }

        pci_set_drvdata(pdev, il);
        err = pci_request_regions(pdev, DRV_NAME);
        if (err)
                goto out_pci_disable_device;

        /***********************
         * 3. Read REV Register
         * ********************/
        il->hw_base = pci_ioremap_bar(pdev, 0);
        if (!il->hw_base) {
                err = -ENODEV;
                goto out_pci_release_regions;
        }

        D_INFO("pci_resource_len = 0x%08llx\n",
               (unsigned long long)pci_resource_len(pdev, 0));
        D_INFO("pci_resource_base = %p\n", il->hw_base);

        /* We disable the RETRY_TIMEOUT register (0x41) to keep
         * PCI Tx retries from interfering with C3 CPU state */
        pci_write_config_byte(pdev, 0x41, 0x00);

        /* these spin locks will be used in apm_init and EEPROM access
         * we should init now
         */
        spin_lock_init(&il->reg_lock);
        spin_lock_init(&il->lock);

        /*
         * stop and reset the on-board processor just in case it is in a
         * strange state ... like being left stranded by a primary kernel
         * and this is now the kdump kernel trying to start up
         */
        _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);

        /***********************
         * 4. Read EEPROM
         * ********************/

        /* Read the EEPROM */
        err = il_eeprom_init(il);
        if (err) {
                IL_ERR("Unable to init EEPROM\n");
                goto out_iounmap;
        }
        /* MAC Address location in EEPROM same for 3945/4965 */
        eeprom = (struct il3945_eeprom *)il->eeprom;
        D_INFO("MAC address: %pM\n", eeprom->mac_address);
        SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);

        /***********************
         * 5. Setup HW Constants
         * ********************/
        /* Device-specific setup */
        if (il3945_hw_set_hw_params(il)) {
                IL_ERR("failed to set hw settings\n");
                goto out_eeprom_free;
        }

        /***********************
         * 6. Setup il
         * ********************/

        err = il3945_init_drv(il);
        if (err) {
                IL_ERR("initializing driver failed\n");
                goto out_unset_hw_params;
        }

        IL_INFO("Detected Intel Wireless WiFi Link %s\n", il->cfg->name);

        /***********************
         * 7. Setup Services
         * ********************/

        spin_lock_irqsave(&il->lock, flags);
        il_disable_interrupts(il);
        spin_unlock_irqrestore(&il->lock, flags);

        pci_enable_msi(il->pci_dev);

        err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
        if (err) {
                IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
                goto out_disable_msi;
        }

        err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
        if (err) {
                IL_ERR("failed to create sysfs device attributes\n");
                goto out_release_irq;
        }

        il_set_rxon_channel(il, &il->bands[IEEE80211_BAND_2GHZ].channels[5]);
        il3945_setup_deferred_work(il);
        il3945_setup_handlers(il);
        il_power_initialize(il);

        /*********************************
         * 8. Setup and Register mac80211
         * *******************************/

        il_enable_interrupts(il);

        err = il3945_setup_mac(il);
        if (err)
                goto out_remove_sysfs;

        err = il_dbgfs_register(il, DRV_NAME);
        if (err)
                IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
                       err);

        /* Start monitoring the killswitch */
        queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll, 2 * HZ);

        return 0;

out_remove_sysfs:
        destroy_workqueue(il->workqueue);
        il->workqueue = NULL;
        sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
out_release_irq:
        free_irq(il->pci_dev->irq, il);
out_disable_msi:
        pci_disable_msi(il->pci_dev);
        il_free_geos(il);
        il_free_channel_map(il);
out_unset_hw_params:
        il3945_unset_hw_params(il);
out_eeprom_free:
        il_eeprom_free(il);
out_iounmap:
        iounmap(il->hw_base);
out_pci_release_regions:
        pci_release_regions(pdev);
out_pci_disable_device:
        pci_set_drvdata(pdev, NULL);
        pci_disable_device(pdev);
out_ieee80211_free_hw:
        ieee80211_free_hw(il->hw);
out:
        return err;
}

static void
il3945_pci_remove(struct pci_dev *pdev)
{
        struct il_priv *il = pci_get_drvdata(pdev);
        unsigned long flags;

        if (!il)
                return;

        D_INFO("*** UNLOAD DRIVER ***\n");

        il_dbgfs_unregister(il);

        set_bit(S_EXIT_PENDING, &il->status);

        il_leds_exit(il);

        if (il->mac80211_registered) {
                ieee80211_unregister_hw(il->hw);
                il->mac80211_registered = 0;
        } else {
                il3945_down(il);
        }

        /*
         * Make sure device is reset to low power before unloading driver.
         * This may be redundant with il_down(), but there are paths to
         * run il_down() without calling apm_ops.stop(), and there are
         * paths to avoid running il_down() at all before leaving driver.
         * This (inexpensive) call *makes sure* device is reset.
         */
        il_apm_stop(il);

        /* make sure we flush any pending irq or
         * tasklet for the driver
         */
        spin_lock_irqsave(&il->lock, flags);
        il_disable_interrupts(il);
        spin_unlock_irqrestore(&il->lock, flags);

        il3945_synchronize_irq(il);

        sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);

        cancel_delayed_work_sync(&il->_3945.rfkill_poll);

        il3945_dealloc_ucode_pci(il);

        if (il->rxq.bd)
                il3945_rx_queue_free(il, &il->rxq);
        il3945_hw_txq_ctx_free(il);

        il3945_unset_hw_params(il);

        /*netif_stop_queue(dev); */
        flush_workqueue(il->workqueue);

        /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
         * il->workqueue... so we can't take down the workqueue
         * until now... */
        destroy_workqueue(il->workqueue);
        il->workqueue = NULL;

        free_irq(pdev->irq, il);
        pci_disable_msi(pdev);

        iounmap(il->hw_base);
        pci_release_regions(pdev);
        pci_disable_device(pdev);
        pci_set_drvdata(pdev, NULL);

        il_free_channel_map(il);
        il_free_geos(il);
        kfree(il->scan_cmd);
        if (il->beacon_skb)
                dev_kfree_skb(il->beacon_skb);

        ieee80211_free_hw(il->hw);
}

/*****************************************************************************
 *
 * driver and module entry point
 *
 *****************************************************************************/

static struct pci_driver il3945_driver = {
        .name = DRV_NAME,
        .id_table = il3945_hw_card_ids,
        .probe = il3945_pci_probe,
        .remove = il3945_pci_remove,
        .driver.pm = IL_LEGACY_PM_OPS,
};

static int __init
il3945_init(void)
{

        int ret;
        pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
        pr_info(DRV_COPYRIGHT "\n");

        ret = il3945_rate_control_register();
        if (ret) {
                pr_err("Unable to register rate control algorithm: %d\n", ret);
                return ret;
        }

        ret = pci_register_driver(&il3945_driver);
        if (ret) {
                pr_err("Unable to initialize PCI module\n");
                goto error_register;
        }

        return ret;

error_register:
        il3945_rate_control_unregister();
        return ret;
}

static void __exit
il3945_exit(void)
{
        pci_unregister_driver(&il3945_driver);
        il3945_rate_control_unregister();
}

MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));

module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
MODULE_PARM_DESC(swcrypto, "using software crypto (default 1 [software])");
module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan, int,
                   S_IRUGO);
MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
#ifdef CONFIG_IWLEGACY_DEBUG
module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "debug output mask");
#endif
module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");

module_exit(il3945_exit);
module_init(il3945_init);