drivers/net/usb/cdc_subset.c

   1 /*
   2  * Simple "CDC Subset" USB Networking Links
   3  * Copyright (C) 2000-2005 by David Brownell
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; either version 2 of the License, or
   8  * (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  18  */
  19
  20 #include <linux/module.h>
  21 #include <linux/kmod.h>
  22 #include <linux/init.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/etherdevice.h>
  25 #include <linux/ethtool.h>
  26 #include <linux/workqueue.h>
  27 #include <linux/mii.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/usbnet.h>
  30
  31
  32 /*
  33  * This supports simple USB network links that don't require any special
  34  * framing or hardware control operations.  The protocol used here is a
  35  * strict subset of CDC Ethernet, with three basic differences reflecting
  36  * the goal that almost any hardware should run it:
  37  *
  38  *  - Minimal runtime control:  one interface, no altsettings, and
  39  *    no vendor or class specific control requests.  If a device is
  40  *    configured, it is allowed to exchange packets with the host.
  41  *    Fancier models would mean not working on some hardware.
  42  *
  43  *  - Minimal manufacturing control:  no IEEE "Organizationally
  44  *    Unique ID" required, or an EEPROMs to store one.  Each host uses
  45  *    one random "locally assigned" Ethernet address instead, which can
  46  *    of course be overridden using standard tools like "ifconfig".
  47  *    (With 2^46 such addresses, same-net collisions are quite rare.)
  48  *
  49  *  - There is no additional framing data for USB.  Packets are written
  50  *    exactly as in CDC Ethernet, starting with an Ethernet header and
  51  *    terminated by a short packet.  However, the host will never send a
  52  *    zero length packet; some systems can't handle those robustly.
  53  *
  54  * Anything that can transmit and receive USB bulk packets can implement
  55  * this protocol.  That includes both smart peripherals and quite a lot
  56  * of "host-to-host" USB cables (which embed two devices back-to-back).
  57  *
  58  * Note that although Linux may use many of those host-to-host links
  59  * with this "cdc_subset" framing, that doesn't mean there may not be a
  60  * better approach.  Handling the "other end unplugs/replugs" scenario
  61  * well tends to require chip-specific vendor requests.  Also, Windows
  62  * peers at the other end of host-to-host cables may expect their own
  63  * framing to be used rather than this "cdc_subset" model.
  64  */
  65
  66 #if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
  67 /* PDA style devices are always connected if present */
  68 static int always_connected (struct usbnet *dev)
  69 {
  70         return 0;
  71 }
  72 #endif
  73
  74 #ifdef  CONFIG_USB_ALI_M5632
  75 #define HAVE_HARDWARE
  76
  77 /*-------------------------------------------------------------------------
  78  *
  79  * ALi M5632 driver ... does high speed
  80  *
  81  * NOTE that the MS-Windows drivers for this chip use some funky and
  82  * (naturally) undocumented 7-byte prefix to each packet, so this is a
  83  * case where we don't currently interoperate.  Also, once you unplug
  84  * one end of the cable, you need to replug the other end too ... since
  85  * chip docs are unavailable, there's no way to reset the relevant state
  86  * short of a power cycle.
  87  *
  88  *-------------------------------------------------------------------------*/
  89
  90 static const struct driver_info ali_m5632_info = {
  91         .description =  "ALi M5632",
  92         .flags       = FLAG_POINTTOPOINT,
  93 };
  94
  95 #endif
  96
  97 \f
  98 #ifdef  CONFIG_USB_AN2720
  99 #define HAVE_HARDWARE
 100
 101 /*-------------------------------------------------------------------------
 102  *
 103  * AnchorChips 2720 driver ... http://www.cypress.com
 104  *
 105  * This doesn't seem to have a way to detect whether the peer is
 106  * connected, or need any reset handshaking.  It's got pretty big
 107  * internal buffers (handles most of a frame's worth of data).
 108  * Chip data sheets don't describe any vendor control messages.
 109  *
 110  *-------------------------------------------------------------------------*/
 111
 112 static const struct driver_info an2720_info = {
 113         .description =  "AnchorChips/Cypress 2720",
 114         .flags       = FLAG_POINTTOPOINT,
 115         // no reset available!
 116         // no check_connect available!
 117
 118         .in = 2, .out = 2,              // direction distinguishes these
 119 };
 120
 121 #endif  /* CONFIG_USB_AN2720 */
 122
 123 \f
 124 #ifdef  CONFIG_USB_BELKIN
 125 #define HAVE_HARDWARE
 126
 127 /*-------------------------------------------------------------------------
 128  *
 129  * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
 130  *
 131  * ... also two eTEK designs, including one sold as "Advance USBNET"
 132  *
 133  *-------------------------------------------------------------------------*/
 134
 135 static const struct driver_info belkin_info = {
 136         .description =  "Belkin, eTEK, or compatible",
 137         .flags       = FLAG_POINTTOPOINT,
 138 };
 139
 140 #endif  /* CONFIG_USB_BELKIN */
 141
 142
 143 \f
 144 #ifdef  CONFIG_USB_EPSON2888
 145 #define HAVE_HARDWARE
 146
 147 /*-------------------------------------------------------------------------
 148  *
 149  * EPSON USB clients
 150  *
 151  * This is the same idea as Linux PDAs (below) except the firmware in the
 152  * device might not be Tux-powered.  Epson provides reference firmware that
 153  * implements this interface.  Product developers can reuse or modify that
 154  * code, such as by using their own product and vendor codes.
 155  *
 156  * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
 157  *
 158  *-------------------------------------------------------------------------*/
 159
 160 static const struct driver_info epson2888_info = {
 161         .description =  "Epson USB Device",
 162         .check_connect = always_connected,
 163         .flags = FLAG_POINTTOPOINT,
 164
 165         .in = 4, .out = 3,
 166 };
 167
 168 #endif  /* CONFIG_USB_EPSON2888 */
 169
 170 \f
 171 /*-------------------------------------------------------------------------
 172  *
 173  * info from Jonathan McDowell <noodles@earth.li>
 174  *
 175  *-------------------------------------------------------------------------*/
 176 #ifdef CONFIG_USB_KC2190
 177 #define HAVE_HARDWARE
 178 static const struct driver_info kc2190_info = {
 179         .description =  "KC Technology KC-190",
 180         .flags = FLAG_POINTTOPOINT,
 181 };
 182 #endif /* CONFIG_USB_KC2190 */
 183
 184 \f
 185 #ifdef  CONFIG_USB_ARMLINUX
 186 #define HAVE_HARDWARE
 187
 188 /*-------------------------------------------------------------------------
 189  *
 190  * Intel's SA-1100 chip integrates basic USB support, and is used
 191  * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
 192  * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
 193  * network using minimal USB framing data.
 194  *
 195  * This describes the driver currently in standard ARM Linux kernels.
 196  * The Zaurus uses a different driver (see later).
 197  *
 198  * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
 199  * and different USB endpoint numbering than the SA1100 devices.  The
 200  * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
 201  * so we rely on the endpoint descriptors.
 202  *
 203  *-------------------------------------------------------------------------*/
 204
 205 static const struct driver_info linuxdev_info = {
 206         .description =  "Linux Device",
 207         .check_connect = always_connected,
 208         .flags = FLAG_POINTTOPOINT,
 209 };
 210
 211 static const struct driver_info yopy_info = {
 212         .description =  "Yopy",
 213         .check_connect = always_connected,
 214         .flags = FLAG_POINTTOPOINT,
 215 };
 216
 217 static const struct driver_info blob_info = {
 218         .description =  "Boot Loader OBject",
 219         .check_connect = always_connected,
 220         .flags = FLAG_POINTTOPOINT,
 221 };
 222
 223 #endif  /* CONFIG_USB_ARMLINUX */
 224
 225 \f
 226 /*-------------------------------------------------------------------------*/
 227
 228 #ifndef HAVE_HARDWARE
 229 #warning You need to configure some hardware for this driver
 230 #endif
 231
 232 /*
 233  * chip vendor names won't normally be on the cables, and
 234  * may not be on the device.
 235  */
 236
 237 static const struct usb_device_id       products [] = {
 238
 239 #ifdef  CONFIG_USB_ALI_M5632
 240 {
 241         USB_DEVICE (0x0402, 0x5632),    // ALi defaults
 242         .driver_info =  (unsigned long) &ali_m5632_info,
 243 },
 244 {
 245         USB_DEVICE (0x182d,0x207c),     // SiteCom CN-124
 246         .driver_info =  (unsigned long) &ali_m5632_info,
 247 },
 248 #endif
 249
 250 #ifdef  CONFIG_USB_AN2720
 251 {
 252         USB_DEVICE (0x0547, 0x2720),    // AnchorChips defaults
 253         .driver_info =  (unsigned long) &an2720_info,
 254 }, {
 255         USB_DEVICE (0x0547, 0x2727),    // Xircom PGUNET
 256         .driver_info =  (unsigned long) &an2720_info,
 257 },
 258 #endif
 259
 260 #ifdef  CONFIG_USB_BELKIN
 261 {
 262         USB_DEVICE (0x050d, 0x0004),    // Belkin
 263         .driver_info =  (unsigned long) &belkin_info,
 264 }, {
 265         USB_DEVICE (0x056c, 0x8100),    // eTEK
 266         .driver_info =  (unsigned long) &belkin_info,
 267 }, {
 268         USB_DEVICE (0x0525, 0x9901),    // Advance USBNET (eTEK)
 269         .driver_info =  (unsigned long) &belkin_info,
 270 },
 271 #endif
 272
 273 #ifdef  CONFIG_USB_EPSON2888
 274 {
 275         USB_DEVICE (0x0525, 0x2888),    // EPSON USB client
 276         .driver_info    = (unsigned long) &epson2888_info,
 277 },
 278 #endif
 279
 280 #ifdef CONFIG_USB_KC2190
 281 {
 282         USB_DEVICE (0x050f, 0x0190),    // KC-190
 283         .driver_info =  (unsigned long) &kc2190_info,
 284 },
 285 #endif
 286
 287 #ifdef  CONFIG_USB_ARMLINUX
 288 /*
 289  * SA-1100 using standard ARM Linux kernels, or compatible.
 290  * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
 291  * The sa-1100 "usb-eth" driver handles the basic framing.
 292  *
 293  * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
 294  * the sa1100 one, but hardware uses different endpoint numbers.
 295  *
 296  * Or the Linux "Ethernet" gadget on hardware that can't talk
 297  * CDC Ethernet (e.g., no altsettings), in either of two modes:
 298  *  - acting just like the old "usb-eth" firmware, though
 299  *    the implementation is different
 300  *  - supporting RNDIS as the first/default configuration for
 301  *    MS-Windows interop; Linux needs to use the other config
 302  */
 303 {
 304         // 1183 = 0x049F, both used as hex values?
 305         // Compaq "Itsy" vendor/product id
 306         USB_DEVICE (0x049F, 0x505A),    // usb-eth, or compatible
 307         .driver_info =  (unsigned long) &linuxdev_info,
 308 }, {
 309         USB_DEVICE (0x0E7E, 0x1001),    // G.Mate "Yopy"
 310         .driver_info =  (unsigned long) &yopy_info,
 311 }, {
 312         USB_DEVICE (0x8086, 0x07d3),    // "blob" bootloader
 313         .driver_info =  (unsigned long) &blob_info,
 314 }, {
 315         USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
 316         .driver_info =  (unsigned long) &blob_info,
 317 }, {
 318         // Linux Ethernet/RNDIS gadget, mostly on PXA, second config
 319         // e.g. Gumstix, current OpenZaurus, ... or anything else
 320         // that just enables this gadget option.
 321         USB_DEVICE (0x0525, 0xa4a2),
 322         .driver_info =  (unsigned long) &linuxdev_info,
 323 },
 324 #endif
 325
 326         { },            // END
 327 };
 328 MODULE_DEVICE_TABLE(usb, products);
 329
 330 /*-------------------------------------------------------------------------*/
 331
 332 static struct usb_driver cdc_subset_driver = {
 333         .name =         "cdc_subset",
 334         .probe =        usbnet_probe,
 335         .suspend =      usbnet_suspend,
 336         .resume =       usbnet_resume,
 337         .disconnect =   usbnet_disconnect,
 338         .id_table =     products,
 339         .disable_hub_initiated_lpm = 1,
 340 };
 341
 342 module_usb_driver(cdc_subset_driver);
 343
 344 MODULE_AUTHOR("David Brownell");
 345 MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
 346 MODULE_LICENSE("GPL");