Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
[GitHub/LineageOS/android_kernel_motorola_exynos9610.git] / drivers / net / usb / ax88172a.c
1 /*
2 * ASIX AX88172A based USB 2.0 Ethernet Devices
3 * Copyright (C) 2012 OMICRON electronics GmbH
4 *
5 * Supports external PHYs via phylib. Based on the driver for the
6 * AX88772. Original copyrights follow:
7 *
8 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
9 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
10 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
11 * Copyright (c) 2002-2003 TiVo Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, see <http://www.gnu.org/licenses/>.
25 */
26
27 #include "asix.h"
28 #include <linux/phy.h>
29
30 struct ax88172a_private {
31 struct mii_bus *mdio;
32 struct phy_device *phydev;
33 char phy_name[20];
34 u16 phy_addr;
35 u16 oldmode;
36 int use_embdphy;
37 struct asix_rx_fixup_info rx_fixup_info;
38 };
39
40 /* MDIO read and write wrappers for phylib */
41 static int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
42 {
43 return asix_mdio_read(((struct usbnet *)bus->priv)->net, phy_id,
44 regnum);
45 }
46
47 static int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum,
48 u16 val)
49 {
50 asix_mdio_write(((struct usbnet *)bus->priv)->net, phy_id, regnum, val);
51 return 0;
52 }
53
54 static int ax88172a_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
55 {
56 if (!netif_running(net))
57 return -EINVAL;
58
59 if (!net->phydev)
60 return -ENODEV;
61
62 return phy_mii_ioctl(net->phydev, rq, cmd);
63 }
64
65 /* set MAC link settings according to information from phylib */
66 static void ax88172a_adjust_link(struct net_device *netdev)
67 {
68 struct phy_device *phydev = netdev->phydev;
69 struct usbnet *dev = netdev_priv(netdev);
70 struct ax88172a_private *priv = dev->driver_priv;
71 u16 mode = 0;
72
73 if (phydev->link) {
74 mode = AX88772_MEDIUM_DEFAULT;
75
76 if (phydev->duplex == DUPLEX_HALF)
77 mode &= ~AX_MEDIUM_FD;
78
79 if (phydev->speed != SPEED_100)
80 mode &= ~AX_MEDIUM_PS;
81 }
82
83 if (mode != priv->oldmode) {
84 asix_write_medium_mode(dev, mode, 0);
85 priv->oldmode = mode;
86 netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
87 phydev->speed, phydev->duplex, mode);
88 phy_print_status(phydev);
89 }
90 }
91
92 static void ax88172a_status(struct usbnet *dev, struct urb *urb)
93 {
94 /* link changes are detected by polling the phy */
95 }
96
97 /* use phylib infrastructure */
98 static int ax88172a_init_mdio(struct usbnet *dev)
99 {
100 struct ax88172a_private *priv = dev->driver_priv;
101 int ret;
102
103 priv->mdio = mdiobus_alloc();
104 if (!priv->mdio) {
105 netdev_err(dev->net, "Could not allocate MDIO bus\n");
106 return -ENOMEM;
107 }
108
109 priv->mdio->priv = (void *)dev;
110 priv->mdio->read = &asix_mdio_bus_read;
111 priv->mdio->write = &asix_mdio_bus_write;
112 priv->mdio->name = "Asix MDIO Bus";
113 /* mii bus name is usb-<usb bus number>-<usb device number> */
114 snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
115 dev->udev->bus->busnum, dev->udev->devnum);
116
117 ret = mdiobus_register(priv->mdio);
118 if (ret) {
119 netdev_err(dev->net, "Could not register MDIO bus\n");
120 goto mfree;
121 }
122
123 netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
124 return 0;
125
126 mfree:
127 mdiobus_free(priv->mdio);
128 return ret;
129 }
130
131 static void ax88172a_remove_mdio(struct usbnet *dev)
132 {
133 struct ax88172a_private *priv = dev->driver_priv;
134
135 netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
136 mdiobus_unregister(priv->mdio);
137 mdiobus_free(priv->mdio);
138 }
139
140 static const struct net_device_ops ax88172a_netdev_ops = {
141 .ndo_open = usbnet_open,
142 .ndo_stop = usbnet_stop,
143 .ndo_start_xmit = usbnet_start_xmit,
144 .ndo_tx_timeout = usbnet_tx_timeout,
145 .ndo_change_mtu = usbnet_change_mtu,
146 .ndo_set_mac_address = asix_set_mac_address,
147 .ndo_validate_addr = eth_validate_addr,
148 .ndo_do_ioctl = ax88172a_ioctl,
149 .ndo_set_rx_mode = asix_set_multicast,
150 };
151
152 static const struct ethtool_ops ax88172a_ethtool_ops = {
153 .get_drvinfo = asix_get_drvinfo,
154 .get_link = usbnet_get_link,
155 .get_msglevel = usbnet_get_msglevel,
156 .set_msglevel = usbnet_set_msglevel,
157 .get_wol = asix_get_wol,
158 .set_wol = asix_set_wol,
159 .get_eeprom_len = asix_get_eeprom_len,
160 .get_eeprom = asix_get_eeprom,
161 .set_eeprom = asix_set_eeprom,
162 .nway_reset = phy_ethtool_nway_reset,
163 .get_link_ksettings = phy_ethtool_get_link_ksettings,
164 .set_link_ksettings = phy_ethtool_set_link_ksettings,
165 };
166
167 static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
168 {
169 int ret;
170
171 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
172 if (ret < 0)
173 goto err;
174
175 msleep(150);
176 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
177 if (ret < 0)
178 goto err;
179
180 msleep(150);
181
182 ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
183 0);
184 if (ret < 0)
185 goto err;
186
187 return 0;
188
189 err:
190 return ret;
191 }
192
193
194 static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
195 {
196 int ret;
197 u8 buf[ETH_ALEN];
198 struct ax88172a_private *priv;
199
200 usbnet_get_endpoints(dev, intf);
201
202 priv = kzalloc(sizeof(*priv), GFP_KERNEL);
203 if (!priv)
204 return -ENOMEM;
205
206 dev->driver_priv = priv;
207
208 /* Get the MAC address */
209 ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
210 if (ret < 0) {
211 netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
212 goto free;
213 }
214 memcpy(dev->net->dev_addr, buf, ETH_ALEN);
215
216 dev->net->netdev_ops = &ax88172a_netdev_ops;
217 dev->net->ethtool_ops = &ax88172a_ethtool_ops;
218
219 /* are we using the internal or the external phy? */
220 ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
221 if (ret < 0) {
222 netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
223 ret);
224 goto free;
225 }
226
227 netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
228 switch (buf[0] & AX_PHY_SELECT_MASK) {
229 case AX_PHY_SELECT_INTERNAL:
230 netdev_dbg(dev->net, "use internal phy\n");
231 priv->use_embdphy = 1;
232 break;
233 case AX_PHY_SELECT_EXTERNAL:
234 netdev_dbg(dev->net, "use external phy\n");
235 priv->use_embdphy = 0;
236 break;
237 default:
238 netdev_err(dev->net, "Interface mode not supported by driver\n");
239 ret = -ENOTSUPP;
240 goto free;
241 }
242
243 priv->phy_addr = asix_read_phy_addr(dev, priv->use_embdphy);
244 ax88172a_reset_phy(dev, priv->use_embdphy);
245
246 /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
247 if (dev->driver_info->flags & FLAG_FRAMING_AX) {
248 /* hard_mtu is still the default - the device does not support
249 jumbo eth frames */
250 dev->rx_urb_size = 2048;
251 }
252
253 /* init MDIO bus */
254 ret = ax88172a_init_mdio(dev);
255 if (ret)
256 goto free;
257
258 return 0;
259
260 free:
261 kfree(priv);
262 return ret;
263 }
264
265 static int ax88172a_stop(struct usbnet *dev)
266 {
267 struct ax88172a_private *priv = dev->driver_priv;
268
269 netdev_dbg(dev->net, "Stopping interface\n");
270
271 if (priv->phydev) {
272 netdev_info(dev->net, "Disconnecting from phy %s\n",
273 priv->phy_name);
274 phy_stop(priv->phydev);
275 phy_disconnect(priv->phydev);
276 }
277
278 return 0;
279 }
280
281 static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
282 {
283 struct ax88172a_private *priv = dev->driver_priv;
284
285 ax88172a_remove_mdio(dev);
286 kfree(priv);
287 }
288
289 static int ax88172a_reset(struct usbnet *dev)
290 {
291 struct asix_data *data = (struct asix_data *)&dev->data;
292 struct ax88172a_private *priv = dev->driver_priv;
293 int ret;
294 u16 rx_ctl;
295
296 ax88172a_reset_phy(dev, priv->use_embdphy);
297
298 msleep(150);
299 rx_ctl = asix_read_rx_ctl(dev, 0);
300 netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
301 ret = asix_write_rx_ctl(dev, 0x0000, 0);
302 if (ret < 0)
303 goto out;
304
305 rx_ctl = asix_read_rx_ctl(dev, 0);
306 netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
307
308 msleep(150);
309
310 ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
311 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
312 AX88772_IPG2_DEFAULT, 0, NULL, 0);
313 if (ret < 0) {
314 netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
315 goto out;
316 }
317
318 /* Rewrite MAC address */
319 memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
320 ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
321 data->mac_addr, 0);
322 if (ret < 0)
323 goto out;
324
325 /* Set RX_CTL to default values with 2k buffer, and enable cactus */
326 ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
327 if (ret < 0)
328 goto out;
329
330 rx_ctl = asix_read_rx_ctl(dev, 0);
331 netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
332 rx_ctl);
333
334 rx_ctl = asix_read_medium_status(dev, 0);
335 netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
336 rx_ctl);
337
338 /* Connect to PHY */
339 snprintf(priv->phy_name, 20, PHY_ID_FMT,
340 priv->mdio->id, priv->phy_addr);
341
342 priv->phydev = phy_connect(dev->net, priv->phy_name,
343 &ax88172a_adjust_link,
344 PHY_INTERFACE_MODE_MII);
345 if (IS_ERR(priv->phydev)) {
346 netdev_err(dev->net, "Could not connect to PHY device %s\n",
347 priv->phy_name);
348 ret = PTR_ERR(priv->phydev);
349 goto out;
350 }
351
352 netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
353
354 /* During power-up, the AX88172A set the power down (BMCR_PDOWN)
355 * bit of the PHY. Bring the PHY up again.
356 */
357 genphy_resume(priv->phydev);
358 phy_start(priv->phydev);
359
360 return 0;
361
362 out:
363 return ret;
364
365 }
366
367 static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
368 {
369 struct ax88172a_private *dp = dev->driver_priv;
370 struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
371
372 return asix_rx_fixup_internal(dev, skb, rx);
373 }
374
375 const struct driver_info ax88172a_info = {
376 .description = "ASIX AX88172A USB 2.0 Ethernet",
377 .bind = ax88172a_bind,
378 .reset = ax88172a_reset,
379 .stop = ax88172a_stop,
380 .unbind = ax88172a_unbind,
381 .status = ax88172a_status,
382 .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
383 FLAG_MULTI_PACKET,
384 .rx_fixup = ax88172a_rx_fixup,
385 .tx_fixup = asix_tx_fixup,
386 };