drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on !S390
   8         depends on NET_ETHERNET
   9         help
  10           Ethernet controllers are usually attached to PHY
  11           devices.  This option provides infrastructure for
  12           managing PHY devices.
  13
  14 if PHYLIB
  15
  16 comment "MII PHY device drivers"
  17
  18 config MARVELL_PHY
  19         tristate "Drivers for Marvell PHYs"
  20         ---help---
  21           Currently has a driver for the 88E1011S
  22
  23 config DAVICOM_PHY
  24         tristate "Drivers for Davicom PHYs"
  25         ---help---
  26           Currently supports dm9161e and dm9131
  27
  28 config QSEMI_PHY
  29         tristate "Drivers for Quality Semiconductor PHYs"
  30         ---help---
  31           Currently supports the qs6612
  32
  33 config LXT_PHY
  34         tristate "Drivers for the Intel LXT PHYs"
  35         ---help---
  36           Currently supports the lxt970, lxt971
  37
  38 config CICADA_PHY
  39         tristate "Drivers for the Cicada PHYs"
  40         ---help---
  41           Currently supports the cis8204
  42
  43 config VITESSE_PHY
  44         tristate "Drivers for the Vitesse PHYs"
  45         ---help---
  46           Currently supports the vsc8244
  47
  48 config SMSC_PHY
  49         tristate "Drivers for SMSC PHYs"
  50         ---help---
  51           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  52
  53 config BROADCOM_PHY
  54         tristate "Drivers for Broadcom PHYs"
  55         ---help---
  56           Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
  57           and BCM5482 PHYs.
  58
  59 config BCM63XX_PHY
  60         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  61         depends on BCM63XX
  62         ---help---
  63           Currently supports the 6348 and 6358 PHYs.
  64
  65 config ICPLUS_PHY
  66         tristate "Drivers for ICPlus PHYs"
  67         ---help---
  68           Currently supports the IP175C PHY.
  69
  70 config REALTEK_PHY
  71         tristate "Drivers for Realtek PHYs"
  72         ---help---
  73           Supports the Realtek 821x PHY.
  74
  75 config NATIONAL_PHY
  76         tristate "Drivers for National Semiconductor PHYs"
  77         ---help---
  78           Currently supports the DP83865 PHY.
  79
  80 config STE10XP
  81         depends on PHYLIB
  82         tristate "Driver for STMicroelectronics STe10Xp PHYs"
  83         ---help---
  84           This is the driver for the STe100p and STe101p PHYs.
  85
  86 config LSI_ET1011C_PHY
  87         tristate "Driver for LSI ET1011C PHY"
  88         ---help---
  89           Supports the LSI ET1011C PHY.
  90
  91 config FIXED_PHY
  92         bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
  93         depends on PHYLIB=y
  94         ---help---
  95           Adds the platform "fixed" MDIO Bus to cover the boards that use
  96           PHYs that are not connected to the real MDIO bus.
  97
  98           Currently tested with mpc866ads and mpc8349e-mitx.
  99
 100 config MDIO_BITBANG
 101         tristate "Support for bitbanged MDIO buses"
 102         help
 103           This module implements the MDIO bus protocol in software,
 104           for use by low level drivers that export the ability to
 105           drive the relevant pins.
 106
 107           If in doubt, say N.
 108
 109 config MDIO_GPIO
 110         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 111         depends on MDIO_BITBANG && GENERIC_GPIO
 112         ---help---
 113           Supports GPIO lib-based MDIO busses.
 114
 115           To compile this driver as a module, choose M here: the module
 116           will be called mdio-gpio.
 117
 118 endif # PHYLIB