drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on NETDEVICES
   8         help
   9           Ethernet controllers are usually attached to PHY
  10           devices.  This option provides infrastructure for
  11           managing PHY devices.
  12
  13 if PHYLIB
  14
  15 config SWPHY
  16         bool
  17
  18 comment "MDIO bus device drivers"
  19
  20 config MDIO_BCM_IPROC
  21         tristate "Broadcom iProc MDIO bus controller"
  22         depends on ARCH_BCM_IPROC || COMPILE_TEST
  23         depends on HAS_IOMEM && OF_MDIO
  24         help
  25           This module provides a driver for the MDIO busses found in the
  26           Broadcom iProc SoC's.
  27
  28 config MDIO_BCM_UNIMAC
  29         tristate "Broadcom UniMAC MDIO bus controller"
  30         depends on HAS_IOMEM
  31         help
  32           This module provides a driver for the Broadcom UniMAC MDIO busses.
  33           This hardware can be found in the Broadcom GENET Ethernet MAC
  34           controllers as well as some Broadcom Ethernet switches such as the
  35           Starfighter 2 switches.
  36
  37 config MDIO_BITBANG
  38         tristate "Bitbanged MDIO buses"
  39         help
  40           This module implements the MDIO bus protocol in software,
  41           for use by low level drivers that export the ability to
  42           drive the relevant pins.
  43
  44           If in doubt, say N.
  45
  46 config MDIO_BUS_MUX
  47         tristate
  48         depends on OF_MDIO
  49         help
  50           This module provides a driver framework for MDIO bus
  51           multiplexers which connect one of several child MDIO busses
  52           to a parent bus.  Switching between child busses is done by
  53           device specific drivers.
  54
  55 config MDIO_BUS_MUX_BCM_IPROC
  56         tristate "Broadcom iProc based MDIO bus multiplexers"
  57         depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
  58         select MDIO_BUS_MUX
  59         default ARCH_BCM_IPROC
  60         help
  61           This module provides a driver for MDIO bus multiplexers found in
  62           iProc based Broadcom SoCs. This multiplexer connects one of several
  63           child MDIO bus to a parent bus. Buses could be internal as well as
  64           external and selection logic lies inside the same multiplexer.
  65
  66 config MDIO_BUS_MUX_GPIO
  67         tristate "GPIO controlled MDIO bus multiplexers"
  68         depends on OF_GPIO && OF_MDIO
  69         select MDIO_BUS_MUX
  70         help
  71           This module provides a driver for MDIO bus multiplexers that
  72           are controlled via GPIO lines.  The multiplexer connects one of
  73           several child MDIO busses to a parent bus.  Child bus
  74           selection is under the control of GPIO lines.
  75
  76 config MDIO_BUS_MUX_MMIOREG
  77         tristate "MMIO device-controlled MDIO bus multiplexers"
  78         depends on OF_MDIO && HAS_IOMEM
  79         select MDIO_BUS_MUX
  80         help
  81           This module provides a driver for MDIO bus multiplexers that
  82           are controlled via a simple memory-mapped device, like an FPGA.
  83           The multiplexer connects one of several child MDIO busses to a
  84           parent bus.  Child bus selection is under the control of one of
  85           the FPGA's registers.
  86
  87           Currently, only 8-bit registers are supported.
  88
  89 config MDIO_CAVIUM
  90         tristate
  91
  92 config MDIO_GPIO
  93         tristate "GPIO lib-based bitbanged MDIO buses"
  94         depends on MDIO_BITBANG && GPIOLIB
  95         ---help---
  96           Supports GPIO lib-based MDIO busses.
  97
  98           To compile this driver as a module, choose M here: the module
  99           will be called mdio-gpio.
 100
 101 config MDIO_HISI_FEMAC
 102         tristate "Hisilicon FEMAC MDIO bus controller"
 103         depends on HAS_IOMEM && OF_MDIO
 104         help
 105           This module provides a driver for the MDIO busses found in the
 106           Hisilicon SoC that have an Fast Ethernet MAC.
 107
 108 config MDIO_MOXART
 109         tristate "MOXA ART MDIO interface support"
 110         depends on ARCH_MOXART
 111         help
 112           This driver supports the MDIO interface found in the network
 113           interface units of the MOXA ART SoC
 114
 115 config MDIO_OCTEON
 116         tristate "Octeon and some ThunderX SOCs MDIO buses"
 117         depends on 64BIT
 118         depends on HAS_IOMEM
 119         select MDIO_CAVIUM
 120         help
 121           This module provides a driver for the Octeon and ThunderX MDIO
 122           buses. It is required by the Octeon and ThunderX ethernet device
 123           drivers on some systems.
 124
 125 config MDIO_SUN4I
 126         tristate "Allwinner sun4i MDIO interface support"
 127         depends on ARCH_SUNXI
 128         help
 129           This driver supports the MDIO interface found in the network
 130           interface units of the Allwinner SoC that have an EMAC (A10,
 131           A12, A10s, etc.)
 132
 133 config MDIO_THUNDER
 134         tristate "ThunderX SOCs MDIO buses"
 135         depends on 64BIT
 136         depends on PCI
 137         select MDIO_CAVIUM
 138         help
 139           This driver supports the MDIO interfaces found on Cavium
 140           ThunderX SoCs when the MDIO bus device appears as a PCI
 141           device.
 142
 143 config MDIO_XGENE
 144         tristate "APM X-Gene SoC MDIO bus controller"
 145         help
 146           This module provides a driver for the MDIO busses found in the
 147           APM X-Gene SoC's.
 148
 149 comment "MII PHY device drivers"
 150
 151 config AMD_PHY
 152         tristate "AMD PHYs"
 153         ---help---
 154           Currently supports the am79c874
 155
 156 config AQUANTIA_PHY
 157         tristate "Aquantia PHYs"
 158         ---help---
 159           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
 160
 161 config AT803X_PHY
 162         tristate "AT803X PHYs"
 163         ---help---
 164           Currently supports the AT8030 and AT8035 model
 165
 166 config BCM63XX_PHY
 167         tristate "Broadcom 63xx SOCs internal PHY"
 168         depends on BCM63XX
 169         select BCM_NET_PHYLIB
 170         ---help---
 171           Currently supports the 6348 and 6358 PHYs.
 172
 173 config BCM7XXX_PHY
 174         tristate "Broadcom 7xxx SOCs internal PHYs"
 175         select BCM_NET_PHYLIB
 176         ---help---
 177           Currently supports the BCM7366, BCM7439, BCM7445, and
 178           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
 179
 180 config BCM87XX_PHY
 181         tristate "Broadcom BCM8706 and BCM8727 PHYs"
 182         help
 183           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
 184
 185 config BCM_CYGNUS_PHY
 186         tristate "Broadcom Cygnus SoC internal PHY"
 187         depends on ARCH_BCM_CYGNUS || COMPILE_TEST
 188         depends on MDIO_BCM_IPROC
 189         select BCM_NET_PHYLIB
 190         ---help---
 191           This PHY driver is for the 1G internal PHYs of the Broadcom
 192           Cygnus Family SoC.
 193
 194           Currently supports internal PHY's used in the BCM11300,
 195           BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
 196           BCM58303 & BCM58305 Broadcom Cygnus SoCs.
 197
 198 config BCM_NET_PHYLIB
 199         tristate
 200
 201 config BROADCOM_PHY
 202         tristate "Broadcom PHYs"
 203         select BCM_NET_PHYLIB
 204         ---help---
 205           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 206           BCM5481 and BCM5482 PHYs.
 207
 208 config CICADA_PHY
 209         tristate "Cicada PHYs"
 210         ---help---
 211           Currently supports the cis8204
 212
 213 config DAVICOM_PHY
 214         tristate "Davicom PHYs"
 215         ---help---
 216           Currently supports dm9161e and dm9131
 217
 218 config DP83848_PHY
 219         tristate "Texas Instruments DP83848 PHY"
 220         ---help---
 221           Supports the DP83848 PHY.
 222
 223 config DP83867_PHY
 224         tristate "Texas Instruments DP83867 Gigabit PHY"
 225         ---help---
 226           Currently supports the DP83867 PHY.
 227
 228 config FIXED_PHY
 229         tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
 230         depends on PHYLIB
 231         select SWPHY
 232         ---help---
 233           Adds the platform "fixed" MDIO Bus to cover the boards that use
 234           PHYs that are not connected to the real MDIO bus.
 235
 236           Currently tested with mpc866ads and mpc8349e-mitx.
 237
 238 config ICPLUS_PHY
 239         tristate "ICPlus PHYs"
 240         ---help---
 241           Currently supports the IP175C and IP1001 PHYs.
 242
 243 config INTEL_XWAY_PHY
 244         tristate "Intel XWAY PHYs"
 245         ---help---
 246           Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
 247           These PHYs are marked as standalone chips under the names
 248           PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
 249           SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
 250
 251 config LSI_ET1011C_PHY
 252         tristate "LSI ET1011C PHY"
 253         ---help---
 254           Supports the LSI ET1011C PHY.
 255
 256 config LXT_PHY
 257         tristate "Intel LXT PHYs"
 258         ---help---
 259           Currently supports the lxt970, lxt971
 260
 261 config MARVELL_PHY
 262         tristate "Marvell PHYs"
 263         ---help---
 264           Currently has a driver for the 88E1011S
 265
 266 config MICREL_PHY
 267         tristate "Micrel PHYs"
 268         ---help---
 269           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 270
 271 config MICROCHIP_PHY
 272         tristate "Microchip PHYs"
 273         help
 274           Supports the LAN88XX PHYs.
 275
 276 config MICROSEMI_PHY
 277         tristate "Microsemi PHYs"
 278         ---help---
 279           Currently supports the VSC8531 and VSC8541 PHYs
 280
 281 config NATIONAL_PHY
 282         tristate "National Semiconductor PHYs"
 283         ---help---
 284           Currently supports the DP83865 PHY.
 285
 286 config QSEMI_PHY
 287         tristate "Quality Semiconductor PHYs"
 288         ---help---
 289           Currently supports the qs6612
 290
 291 config REALTEK_PHY
 292         tristate "Realtek PHYs"
 293         ---help---
 294           Supports the Realtek 821x PHY.
 295
 296 config SMSC_PHY
 297         tristate "SMSC PHYs"
 298         ---help---
 299           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
 300
 301 config STE10XP
 302         tristate "STMicroelectronics STe10Xp PHYs"
 303         ---help---
 304           This is the driver for the STe100p and STe101p PHYs.
 305
 306 config TERANETICS_PHY
 307         tristate "Teranetics PHYs"
 308         ---help---
 309           Currently supports the Teranetics TN2020
 310
 311 config VITESSE_PHY
 312         tristate "Vitesse PHYs"
 313         ---help---
 314           Currently supports the vsc8244
 315
 316 config XILINX_GMII2RGMII
 317        tristate "Xilinx GMII2RGMII converter driver"
 318        ---help---
 319          This driver support xilinx GMII to RGMII IP core it provides
 320          the Reduced Gigabit Media Independent Interface(RGMII) between
 321          Ethernet physical media devices and the Gigabit Ethernet controller.
 322
 323 config MDIO_XGENE
 324         tristate "APM X-Gene SoC MDIO bus controller"
 325         depends on ARCH_XGENE || COMPILE_TEST
 326         help
 327           This module provides a driver for the MDIO busses found in the
 328           APM X-Gene SoC's.
 329
 330 endif # PHYLIB
 331
 332 config MICREL_KS8995MA
 333         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 334         depends on SPI