drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on !S390
   8         depends on NETDEVICES
   9         help
  10           Ethernet controllers are usually attached to PHY
  11           devices.  This option provides infrastructure for
  12           managing PHY devices.
  13
  14 if PHYLIB
  15
  16 comment "MII PHY device drivers"
  17
  18 config AMD_PHY
  19         tristate "Drivers for the AMD PHYs"
  20         ---help---
  21           Currently supports the am79c874
  22
  23 config MARVELL_PHY
  24         tristate "Drivers for Marvell PHYs"
  25         ---help---
  26           Currently has a driver for the 88E1011S
  27
  28 config DAVICOM_PHY
  29         tristate "Drivers for Davicom PHYs"
  30         ---help---
  31           Currently supports dm9161e and dm9131
  32
  33 config QSEMI_PHY
  34         tristate "Drivers for Quality Semiconductor PHYs"
  35         ---help---
  36           Currently supports the qs6612
  37
  38 config LXT_PHY
  39         tristate "Drivers for the Intel LXT PHYs"
  40         ---help---
  41           Currently supports the lxt970, lxt971
  42
  43 config CICADA_PHY
  44         tristate "Drivers for the Cicada PHYs"
  45         ---help---
  46           Currently supports the cis8204
  47
  48 config VITESSE_PHY
  49         tristate "Drivers for the Vitesse PHYs"
  50         ---help---
  51           Currently supports the vsc8244
  52
  53 config SMSC_PHY
  54         tristate "Drivers for SMSC PHYs"
  55         ---help---
  56           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  57
  58 config BROADCOM_PHY
  59         tristate "Drivers for Broadcom PHYs"
  60         ---help---
  61           Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
  62           and BCM5482 PHYs.
  63
  64 config BCM63XX_PHY
  65         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  66         depends on BCM63XX
  67         ---help---
  68           Currently supports the 6348 and 6358 PHYs.
  69
  70 config BCM87XX_PHY
  71         tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
  72         help
  73           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
  74
  75 config ICPLUS_PHY
  76         tristate "Drivers for ICPlus PHYs"
  77         ---help---
  78           Currently supports the IP175C and IP1001 PHYs.
  79
  80 config REALTEK_PHY
  81         tristate "Drivers for Realtek PHYs"
  82         ---help---
  83           Supports the Realtek 821x PHY.
  84
  85 config NATIONAL_PHY
  86         tristate "Drivers for National Semiconductor PHYs"
  87         ---help---
  88           Currently supports the DP83865 PHY.
  89
  90 config STE10XP
  91         tristate "Driver for STMicroelectronics STe10Xp PHYs"
  92         ---help---
  93           This is the driver for the STe100p and STe101p PHYs.
  94
  95 config LSI_ET1011C_PHY
  96         tristate "Driver for LSI ET1011C PHY"
  97         ---help---
  98           Supports the LSI ET1011C PHY.
  99
 100 config MICREL_PHY
 101         tristate "Driver for Micrel PHYs"
 102         ---help---
 103           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 104
 105 config FIXED_PHY
 106         bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 107         depends on PHYLIB=y
 108         ---help---
 109           Adds the platform "fixed" MDIO Bus to cover the boards that use
 110           PHYs that are not connected to the real MDIO bus.
 111
 112           Currently tested with mpc866ads and mpc8349e-mitx.
 113
 114 config MDIO_BITBANG
 115         tristate "Support for bitbanged MDIO buses"
 116         help
 117           This module implements the MDIO bus protocol in software,
 118           for use by low level drivers that export the ability to
 119           drive the relevant pins.
 120
 121           If in doubt, say N.
 122
 123 config MDIO_GPIO
 124         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 125         depends on MDIO_BITBANG && GENERIC_GPIO
 126         ---help---
 127           Supports GPIO lib-based MDIO busses.
 128
 129           To compile this driver as a module, choose M here: the module
 130           will be called mdio-gpio.
 131
 132 config MDIO_OCTEON
 133         tristate "Support for MDIO buses on Octeon SOCs"
 134         depends on  CPU_CAVIUM_OCTEON
 135         default y
 136         help
 137
 138           This module provides a driver for the Octeon MDIO busses.
 139           It is required by the Octeon Ethernet device drivers.
 140
 141           If in doubt, say Y.
 142
 143 config MDIO_BUS_MUX
 144         tristate
 145         depends on OF_MDIO
 146         help
 147           This module provides a driver framework for MDIO bus
 148           multiplexers which connect one of several child MDIO busses
 149           to a parent bus.  Switching between child busses is done by
 150           device specific drivers.
 151
 152 config MDIO_BUS_MUX_GPIO
 153         tristate "Support for GPIO controlled MDIO bus multiplexers"
 154         depends on OF_GPIO && OF_MDIO
 155         select MDIO_BUS_MUX
 156         help
 157           This module provides a driver for MDIO bus multiplexers that
 158           are controlled via GPIO lines.  The multiplexer connects one of
 159           several child MDIO busses to a parent bus.  Child bus
 160           selection is under the control of GPIO lines.
 161
 162 endif # PHYLIB
 163
 164 config MICREL_KS8995MA
 165         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 166         depends on SPI