Staging: et131x: config is already zeroed
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / pcmcia / ibmtr_cs.c
1 /*======================================================================
2
3 A PCMCIA token-ring driver for IBM-based cards
4
5 This driver supports the IBM PCMCIA Token-Ring Card.
6 Written by Steve Kipisz, kipisz@vnet.ibm.com or
7 bungy@ibm.net
8
9 Written 1995,1996.
10
11 This code is based on pcnet_cs.c from David Hinds.
12
13 V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com
14
15 Linux V2.2.x presented significant changes to the underlying
16 ibmtr.c code. Mainly the code became a lot more organized and
17 modular.
18
19 This caused the old PCMCIA Token Ring driver to give up and go
20 home early. Instead of just patching the old code to make it
21 work, the PCMCIA code has been streamlined, updated and possibly
22 improved.
23
24 This code now only contains code required for the Card Services.
25 All we do here is set the card up enough so that the real ibmtr.c
26 driver can find it and work with it properly.
27
28 i.e. We set up the io port, irq, mmio memory and shared ram
29 memory. This enables ibmtr_probe in ibmtr.c to find the card and
30 configure it as though it was a normal ISA and/or PnP card.
31
32 CHANGES
33
34 v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com)
35 Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c
36
37 v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com)
38 Updated to version 2.2.7 to match the first version of the kernel
39 that the modification to ibmtr.c were incorporated into.
40
41 v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com)
42 Address translation feature of PCMCIA controller is usable so
43 memory windows can be placed in High memory (meaning above
44 0xFFFFF.)
45
46 ======================================================================*/
47
48 #include <linux/kernel.h>
49 #include <linux/init.h>
50 #include <linux/ptrace.h>
51 #include <linux/slab.h>
52 #include <linux/string.h>
53 #include <linux/timer.h>
54 #include <linux/module.h>
55 #include <linux/ethtool.h>
56 #include <linux/netdevice.h>
57 #include <linux/trdevice.h>
58 #include <linux/ibmtr.h>
59
60 #include <pcmcia/cs_types.h>
61 #include <pcmcia/cs.h>
62 #include <pcmcia/cistpl.h>
63 #include <pcmcia/ds.h>
64
65 #include <asm/uaccess.h>
66 #include <asm/io.h>
67 #include <asm/system.h>
68
69 #define PCMCIA
70 #include "../tokenring/ibmtr.c"
71
72 #ifdef PCMCIA_DEBUG
73 static int pc_debug = PCMCIA_DEBUG;
74 module_param(pc_debug, int, 0);
75 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
76 static char *version =
77 "ibmtr_cs.c 1.10 1996/01/06 05:19:00 (Steve Kipisz)\n"
78 " 2.2.7 1999/05/03 12:00:00 (Mike Phillips)\n"
79 " 2.4.2 2001/30/28 Midnight (Burt Silverman)\n";
80 #else
81 #define DEBUG(n, args...)
82 #endif
83
84 /*====================================================================*/
85
86 /* Parameters that can be set with 'insmod' */
87
88 /* MMIO base address */
89 static u_long mmiobase = 0xce000;
90
91 /* SRAM base address */
92 static u_long srambase = 0xd0000;
93
94 /* SRAM size 8,16,32,64 */
95 static u_long sramsize = 64;
96
97 /* Ringspeed 4,16 */
98 static int ringspeed = 16;
99
100 module_param(mmiobase, ulong, 0);
101 module_param(srambase, ulong, 0);
102 module_param(sramsize, ulong, 0);
103 module_param(ringspeed, int, 0);
104 MODULE_LICENSE("GPL");
105
106 /*====================================================================*/
107
108 static int ibmtr_config(struct pcmcia_device *link);
109 static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase);
110 static void ibmtr_release(struct pcmcia_device *link);
111 static void ibmtr_detach(struct pcmcia_device *p_dev);
112
113 /*====================================================================*/
114
115 typedef struct ibmtr_dev_t {
116 struct pcmcia_device *p_dev;
117 struct net_device *dev;
118 dev_node_t node;
119 window_handle_t sram_win_handle;
120 struct tok_info *ti;
121 } ibmtr_dev_t;
122
123 static void netdev_get_drvinfo(struct net_device *dev,
124 struct ethtool_drvinfo *info)
125 {
126 strcpy(info->driver, "ibmtr_cs");
127 }
128
129 static const struct ethtool_ops netdev_ethtool_ops = {
130 .get_drvinfo = netdev_get_drvinfo,
131 };
132
133 /*======================================================================
134
135 ibmtr_attach() creates an "instance" of the driver, allocating
136 local data structures for one device. The device is registered
137 with Card Services.
138
139 ======================================================================*/
140
141 static int __devinit ibmtr_attach(struct pcmcia_device *link)
142 {
143 ibmtr_dev_t *info;
144 struct net_device *dev;
145
146 DEBUG(0, "ibmtr_attach()\n");
147
148 /* Create new token-ring device */
149 info = kzalloc(sizeof(*info), GFP_KERNEL);
150 if (!info) return -ENOMEM;
151 dev = alloc_trdev(sizeof(struct tok_info));
152 if (!dev) {
153 kfree(info);
154 return -ENOMEM;
155 }
156
157 info->p_dev = link;
158 link->priv = info;
159 info->ti = netdev_priv(dev);
160
161 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
162 link->io.NumPorts1 = 4;
163 link->io.IOAddrLines = 16;
164 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
165 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
166 link->irq.Handler = &tok_interrupt;
167 link->conf.Attributes = CONF_ENABLE_IRQ;
168 link->conf.IntType = INT_MEMORY_AND_IO;
169 link->conf.Present = PRESENT_OPTION;
170
171 link->irq.Instance = info->dev = dev;
172
173 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
174
175 return ibmtr_config(link);
176 } /* ibmtr_attach */
177
178 /*======================================================================
179
180 This deletes a driver "instance". The device is de-registered
181 with Card Services. If it has been released, all local data
182 structures are freed. Otherwise, the structures will be freed
183 when the device is released.
184
185 ======================================================================*/
186
187 static void ibmtr_detach(struct pcmcia_device *link)
188 {
189 struct ibmtr_dev_t *info = link->priv;
190 struct net_device *dev = info->dev;
191 struct tok_info *ti = netdev_priv(dev);
192
193 DEBUG(0, "ibmtr_detach(0x%p)\n", link);
194
195 /*
196 * When the card removal interrupt hits tok_interrupt(),
197 * bail out early, so we don't crash the machine
198 */
199 ti->sram_phys |= 1;
200
201 if (link->dev_node)
202 unregister_netdev(dev);
203
204 del_timer_sync(&(ti->tr_timer));
205
206 ibmtr_release(link);
207
208 free_netdev(dev);
209 kfree(info);
210 } /* ibmtr_detach */
211
212 /*======================================================================
213
214 ibmtr_config() is scheduled to run after a CARD_INSERTION event
215 is received, to configure the PCMCIA socket, and to make the
216 token-ring device available to the system.
217
218 ======================================================================*/
219
220 #define CS_CHECK(fn, ret) \
221 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
222
223 static int __devinit ibmtr_config(struct pcmcia_device *link)
224 {
225 ibmtr_dev_t *info = link->priv;
226 struct net_device *dev = info->dev;
227 struct tok_info *ti = netdev_priv(dev);
228 win_req_t req;
229 memreq_t mem;
230 int i, last_ret, last_fn;
231
232 DEBUG(0, "ibmtr_config(0x%p)\n", link);
233
234 link->conf.ConfigIndex = 0x61;
235
236 /* Determine if this is PRIMARY or ALTERNATE. */
237
238 /* Try PRIMARY card at 0xA20-0xA23 */
239 link->io.BasePort1 = 0xA20;
240 i = pcmcia_request_io(link, &link->io);
241 if (i != 0) {
242 /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
243 link->io.BasePort1 = 0xA24;
244 CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
245 }
246 dev->base_addr = link->io.BasePort1;
247
248 CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
249 dev->irq = link->irq.AssignedIRQ;
250 ti->irq = link->irq.AssignedIRQ;
251 ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
252
253 /* Allocate the MMIO memory window */
254 req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
255 req.Attributes |= WIN_USE_WAIT;
256 req.Base = 0;
257 req.Size = 0x2000;
258 req.AccessSpeed = 250;
259 CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
260
261 mem.CardOffset = mmiobase;
262 mem.Page = 0;
263 CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
264 ti->mmio = ioremap(req.Base, req.Size);
265
266 /* Allocate the SRAM memory window */
267 req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
268 req.Attributes |= WIN_USE_WAIT;
269 req.Base = 0;
270 req.Size = sramsize * 1024;
271 req.AccessSpeed = 250;
272 CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &info->sram_win_handle));
273
274 mem.CardOffset = srambase;
275 mem.Page = 0;
276 CS_CHECK(MapMemPage, pcmcia_map_mem_page(info->sram_win_handle, &mem));
277
278 ti->sram_base = mem.CardOffset >> 12;
279 ti->sram_virt = ioremap(req.Base, req.Size);
280 ti->sram_phys = req.Base;
281
282 CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
283
284 /* Set up the Token-Ring Controller Configuration Register and
285 turn on the card. Check the "Local Area Network Credit Card
286 Adapters Technical Reference" SC30-3585 for this info. */
287 ibmtr_hw_setup(dev, mmiobase);
288
289 link->dev_node = &info->node;
290 SET_NETDEV_DEV(dev, &handle_to_dev(link));
291
292 i = ibmtr_probe_card(dev);
293 if (i != 0) {
294 printk(KERN_NOTICE "ibmtr_cs: register_netdev() failed\n");
295 link->dev_node = NULL;
296 goto failed;
297 }
298
299 strcpy(info->node.dev_name, dev->name);
300
301 printk(KERN_INFO
302 "%s: port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n",
303 dev->name, dev->base_addr, dev->irq,
304 (u_long)ti->mmio, (u_long)(ti->sram_base << 12),
305 dev->dev_addr);
306 return 0;
307
308 cs_failed:
309 cs_error(link, last_fn, last_ret);
310 failed:
311 ibmtr_release(link);
312 return -ENODEV;
313 } /* ibmtr_config */
314
315 /*======================================================================
316
317 After a card is removed, ibmtr_release() will unregister the net
318 device, and release the PCMCIA configuration. If the device is
319 still open, this will be postponed until it is closed.
320
321 ======================================================================*/
322
323 static void ibmtr_release(struct pcmcia_device *link)
324 {
325 ibmtr_dev_t *info = link->priv;
326 struct net_device *dev = info->dev;
327
328 DEBUG(0, "ibmtr_release(0x%p)\n", link);
329
330 if (link->win) {
331 struct tok_info *ti = netdev_priv(dev);
332 iounmap(ti->mmio);
333 pcmcia_release_window(info->sram_win_handle);
334 }
335 pcmcia_disable_device(link);
336 }
337
338 static int ibmtr_suspend(struct pcmcia_device *link)
339 {
340 ibmtr_dev_t *info = link->priv;
341 struct net_device *dev = info->dev;
342
343 if (link->open)
344 netif_device_detach(dev);
345
346 return 0;
347 }
348
349 static int __devinit ibmtr_resume(struct pcmcia_device *link)
350 {
351 ibmtr_dev_t *info = link->priv;
352 struct net_device *dev = info->dev;
353
354 if (link->open) {
355 ibmtr_probe(dev); /* really? */
356 netif_device_attach(dev);
357 }
358
359 return 0;
360 }
361
362
363 /*====================================================================*/
364
365 static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase)
366 {
367 int i;
368
369 /* Bizarre IBM behavior, there are 16 bits of information we
370 need to set, but the card only allows us to send 4 bits at a
371 time. For each byte sent to base_addr, bits 7-4 tell the
372 card which part of the 16 bits we are setting, bits 3-0 contain
373 the actual information */
374
375 /* First nibble provides 4 bits of mmio */
376 i = (mmiobase >> 16) & 0x0F;
377 outb(i, dev->base_addr);
378
379 /* Second nibble provides 3 bits of mmio */
380 i = 0x10 | ((mmiobase >> 12) & 0x0E);
381 outb(i, dev->base_addr);
382
383 /* Third nibble, hard-coded values */
384 i = 0x26;
385 outb(i, dev->base_addr);
386
387 /* Fourth nibble sets shared ram page size */
388
389 /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */
390 i = (sramsize >> 4) & 0x07;
391 i = ((i == 4) ? 3 : i) << 2;
392 i |= 0x30;
393
394 if (ringspeed == 16)
395 i |= 2;
396 if (dev->base_addr == 0xA24)
397 i |= 1;
398 outb(i, dev->base_addr);
399
400 /* 0x40 will release the card for use */
401 outb(0x40, dev->base_addr);
402
403 return;
404 }
405
406 static struct pcmcia_device_id ibmtr_ids[] = {
407 PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e),
408 PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47),
409 PCMCIA_DEVICE_NULL,
410 };
411 MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids);
412
413 static struct pcmcia_driver ibmtr_cs_driver = {
414 .owner = THIS_MODULE,
415 .drv = {
416 .name = "ibmtr_cs",
417 },
418 .probe = ibmtr_attach,
419 .remove = ibmtr_detach,
420 .id_table = ibmtr_ids,
421 .suspend = ibmtr_suspend,
422 .resume = ibmtr_resume,
423 };
424
425 static int __init init_ibmtr_cs(void)
426 {
427 return pcmcia_register_driver(&ibmtr_cs_driver);
428 }
429
430 static void __exit exit_ibmtr_cs(void)
431 {
432 pcmcia_unregister_driver(&ibmtr_cs_driver);
433 }
434
435 module_init(init_ibmtr_cs);
436 module_exit(exit_ibmtr_cs);