projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
3c*/acenic/typhoon: Move 3Com Ethernet drivers
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / net / lp486e.c
1 /* Intel Professional Workstation/panther ethernet driver */
2 /* lp486e.c: A panther 82596 ethernet driver for linux. */
3 /*
4 History and copyrights:
5
6 Driver skeleton
7 Written 1993 by Donald Becker.
8 Copyright 1993 United States Government as represented by the Director,
9 National Security Agency. This software may only be used and
10 distributed according to the terms of the GNU General Public License
11 as modified by SRC, incorporated herein by reference.
12
13 The author may be reached as becker@scyld.com, or C/O
14 Scyld Computing Corporation
15 410 Severn Ave., Suite 210
16 Annapolis MD 21403
17
18 Apricot
19 Written 1994 by Mark Evans.
20 This driver is for the Apricot 82596 bus-master interface
21
22 Modularised 12/94 Mark Evans
23
24 Professional Workstation
25 Derived from apricot.c by Ard van Breemen
26 <ard@murphy.nl>|<ard@cstmel.hobby.nl>|<ard@cstmel.nl.eu.org>
27
28 Credits:
29 Thanks to Murphy Software BV for letting me write this in their time.
30 Well, actually, I get paid doing this...
31 (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for
32 more information on the Professional Workstation)
33
34 Present version
35 aeb@cwi.nl
36 */
37 /*
38 There are currently two motherboards that I know of in the
39 professional workstation. The only one that I know is the
40 intel panther motherboard. -- ard
41 */
42 /*
43 The pws is equipped with an intel 82596. This is a very intelligent controller
44 which runs its own micro-code. Communication with the hostprocessor is done
45 through linked lists of commands and buffers in the hostprocessors memory.
46 A complete description of the 82596 is available from intel. Search for
47 a file called "29021806.pdf". It is a complete description of the chip itself.
48 To use it for the pws some additions are needed regarding generation of
49 the PORT and CA signal, and the interrupt glue needed for a pc.
50 I/O map:
51 PORT SIZE ACTION MEANING
52 0xCB0 2 WRITE Lower 16 bits for PORT command
53 0xCB2 2 WRITE Upper 16 bits for PORT command, and issue of PORT command
54 0xCB4 1 WRITE Generation of CA signal
55 0xCB8 1 WRITE Clear interrupt glue
56 All other communication is through memory!
57 */
58
59 #include <linux/module.h>
60 #include <linux/init.h>
61 #include <linux/delay.h>
62 #include <linux/kernel.h>
63 #include <linux/string.h>
64 #include <linux/errno.h>
65 #include <linux/ioport.h>
66 #include <linux/slab.h>
67 #include <linux/interrupt.h>
68 #include <linux/netdevice.h>
69 #include <linux/etherdevice.h>
70 #include <linux/skbuff.h>
71 #include <linux/bitops.h>
72
73 #include <asm/io.h>
74 #include <asm/dma.h>
75
76 #define DRV_NAME "lp486e"
77
78 /* debug print flags */
79 #define LOG_SRCDST 0x80000000
80 #define LOG_STATINT 0x40000000
81 #define LOG_STARTINT 0x20000000
82
83 #define i596_debug debug
84
85 static int i596_debug = 0;
86
87 static const char * const medianame[] = {
88 "10baseT", "AUI",
89 "10baseT-FD", "AUI-FD",
90 };
91
92 #define LP486E_TOTAL_SIZE 16
93
94 #define I596_NULL (0xffffffff)
95
96 #define CMD_EOL 0x8000 /* The last command of the list, stop. */
97 #define CMD_SUSP 0x4000 /* Suspend after doing cmd. */
98 #define CMD_INTR 0x2000 /* Interrupt after doing cmd. */
99
100 #define CMD_FLEX 0x0008 /* Enable flexible memory model */
101
102 enum commands {
103 CmdNOP = 0,
104 CmdIASetup = 1,
105 CmdConfigure = 2,
106 CmdMulticastList = 3,
107 CmdTx = 4,
108 CmdTDR = 5,
109 CmdDump = 6,
110 CmdDiagnose = 7
111 };
112
113 #if 0
114 static const char *CUcmdnames[8] = { "NOP", "IASetup", "Configure", "MulticastList",
115 "Tx", "TDR", "Dump", "Diagnose" };
116 #endif
117
118 /* Status word bits */
119 #define STAT_CX 0x8000 /* The CU finished executing a command
120 with the Interrupt bit set */
121 #define STAT_FR 0x4000 /* The RU finished receiving a frame */
122 #define STAT_CNA 0x2000 /* The CU left the active state */
123 #define STAT_RNR 0x1000 /* The RU left the active state */
124 #define STAT_ACK (STAT_CX | STAT_FR | STAT_CNA | STAT_RNR)
125 #define STAT_CUS 0x0700 /* Status of CU: 0: idle, 1: suspended,
126 2: active, 3-7: unused */
127 #define STAT_RUS 0x00f0 /* Status of RU: 0: idle, 1: suspended,
128 2: no resources, 4: ready,
129 10: no resources due to no more RBDs,
130 12: no more RBDs, other: unused */
131 #define STAT_T 0x0008 /* Bus throttle timers loaded */
132 #define STAT_ZERO 0x0807 /* Always zero */
133
134 #if 0
135 static char *CUstates[8] = {
136 "idle", "suspended", "active", 0, 0, 0, 0, 0
137 };
138 static char *RUstates[16] = {
139 "idle", "suspended", "no resources", 0, "ready", 0, 0, 0,
140 0, 0, "no RBDs", 0, "out of RBDs", 0, 0, 0
141 };
142
143 static void
144 i596_out_status(int status) {
145 int bad = 0;
146 char *s;
147
148 printk("status %4.4x:", status);
149 if (status == 0xffff)
150 printk(" strange..\n");
151 else {
152 if (status & STAT_CX)
153 printk(" CU done");
154 if (status & STAT_CNA)
155 printk(" CU stopped");
156 if (status & STAT_FR)
157 printk(" got a frame");
158 if (status & STAT_RNR)
159 printk(" RU stopped");
160 if (status & STAT_T)
161 printk(" throttled");
162 if (status & STAT_ZERO)
163 bad = 1;
164 s = CUstates[(status & STAT_CUS) >> 8];
165 if (!s)
166 bad = 1;
167 else
168 printk(" CU(%s)", s);
169 s = RUstates[(status & STAT_RUS) >> 4];
170 if (!s)
171 bad = 1;
172 else
173 printk(" RU(%s)", s);
174 if (bad)
175 printk(" bad status");
176 printk("\n");
177 }
178 }
179 #endif
180
181 /* Command word bits */
182 #define ACK_CX 0x8000
183 #define ACK_FR 0x4000
184 #define ACK_CNA 0x2000
185 #define ACK_RNR 0x1000
186
187 #define CUC_START 0x0100
188 #define CUC_RESUME 0x0200
189 #define CUC_SUSPEND 0x0300
190 #define CUC_ABORT 0x0400
191
192 #define RX_START 0x0010
193 #define RX_RESUME 0x0020
194 #define RX_SUSPEND 0x0030
195 #define RX_ABORT 0x0040
196
197 typedef u32 phys_addr;
198
199 static inline phys_addr
200 va_to_pa(void *x) {
201 return x ? virt_to_bus(x) : I596_NULL;
202 }
203
204 static inline void *
205 pa_to_va(phys_addr x) {
206 return (x == I596_NULL) ? NULL : bus_to_virt(x);
207 }
208
209 /* status bits for cmd */
210 #define CMD_STAT_C 0x8000 /* CU command complete */
211 #define CMD_STAT_B 0x4000 /* CU command in progress */
212 #define CMD_STAT_OK 0x2000 /* CU command completed without errors */
213 #define CMD_STAT_A 0x1000 /* CU command abnormally terminated */
214
215 struct i596_cmd { /* 8 bytes */
216 unsigned short status;
217 unsigned short command;
218 phys_addr pa_next; /* va_to_pa(struct i596_cmd *next) */
219 };
220
221 #define EOF 0x8000
222 #define SIZE_MASK 0x3fff
223
224 struct i596_tbd {
225 unsigned short size;
226 unsigned short pad;
227 phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */
228 phys_addr pa_data; /* va_to_pa(char *data) */
229 struct sk_buff *skb;
230 };
231
232 struct tx_cmd {
233 struct i596_cmd cmd;
234 phys_addr pa_tbd; /* va_to_pa(struct i596_tbd *tbd) */
235 unsigned short size;
236 unsigned short pad;
237 };
238
239 /* status bits for rfd */
240 #define RFD_STAT_C 0x8000 /* Frame reception complete */
241 #define RFD_STAT_B 0x4000 /* Frame reception in progress */
242 #define RFD_STAT_OK 0x2000 /* Frame received without errors */
243 #define RFD_STATUS 0x1fff
244 #define RFD_LENGTH_ERR 0x1000
245 #define RFD_CRC_ERR 0x0800
246 #define RFD_ALIGN_ERR 0x0400
247 #define RFD_NOBUFS_ERR 0x0200
248 #define RFD_DMA_ERR 0x0100 /* DMA overrun failure to acquire system bus */
249 #define RFD_SHORT_FRAME_ERR 0x0080
250 #define RFD_NOEOP_ERR 0x0040
251 #define RFD_TRUNC_ERR 0x0020
252 #define RFD_MULTICAST 0x0002 /* 0: destination had our address
253 1: destination was broadcast/multicast */
254 #define RFD_COLLISION 0x0001
255
256 /* receive frame descriptor */
257 struct i596_rfd {
258 unsigned short stat;
259 unsigned short cmd;
260 phys_addr pa_next; /* va_to_pa(struct i596_rfd *next) */
261 phys_addr pa_rbd; /* va_to_pa(struct i596_rbd *rbd) */
262 unsigned short count;
263 unsigned short size;
264 char data[1532];
265 };
266
267 #define RBD_EL 0x8000
268 #define RBD_P 0x4000
269 #define RBD_SIZEMASK 0x3fff
270 #define RBD_EOF 0x8000
271 #define RBD_F 0x4000
272
273 /* receive buffer descriptor */
274 struct i596_rbd {
275 unsigned short size;
276 unsigned short pad;
277 phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */
278 phys_addr pa_data; /* va_to_pa(char *data) */
279 phys_addr pa_prev; /* va_to_pa(struct i596_tbd *prev) */
280
281 /* Driver private part */
282 struct sk_buff *skb;
283 };
284
285 #define RX_RING_SIZE 64
286 #define RX_SKBSIZE (ETH_FRAME_LEN+10)
287 #define RX_RBD_SIZE 32
288
289 /* System Control Block - 40 bytes */
290 struct i596_scb {
291 u16 status; /* 0 */
292 u16 command; /* 2 */
293 phys_addr pa_cmd; /* 4 - va_to_pa(struct i596_cmd *cmd) */
294 phys_addr pa_rfd; /* 8 - va_to_pa(struct i596_rfd *rfd) */
295 u32 crc_err; /* 12 */
296 u32 align_err; /* 16 */
297 u32 resource_err; /* 20 */
298 u32 over_err; /* 24 */
299 u32 rcvdt_err; /* 28 */
300 u32 short_err; /* 32 */
301 u16 t_on; /* 36 */
302 u16 t_off; /* 38 */
303 };
304
305 /* Intermediate System Configuration Pointer - 8 bytes */
306 struct i596_iscp {
307 u32 busy; /* 0 */
308 phys_addr pa_scb; /* 4 - va_to_pa(struct i596_scb *scb) */
309 };
310
311 /* System Configuration Pointer - 12 bytes */
312 struct i596_scp {
313 u32 sysbus; /* 0 */
314 u32 pad; /* 4 */
315 phys_addr pa_iscp; /* 8 - va_to_pa(struct i596_iscp *iscp) */
316 };
317
318 /* Selftest and dump results - needs 16-byte alignment */
319 /*
320 * The size of the dump area is 304 bytes. When the dump is executed
321 * by the Port command an extra word will be appended to the dump area.
322 * The extra word is a copy of the Dump status word (containing the
323 * C, B, OK bits). [I find 0xa006, with a0 for C+OK and 6 for dump]
324 */
325 struct i596_dump {
326 u16 dump[153]; /* (304 = 130h) + 2 bytes */
327 };
328
329 struct i596_private { /* aligned to a 16-byte boundary */
330 struct i596_scp scp; /* 0 - needs 16-byte alignment */
331 struct i596_iscp iscp; /* 12 */
332 struct i596_scb scb; /* 20 */
333 u32 dummy; /* 60 */
334 struct i596_dump dump; /* 64 - needs 16-byte alignment */
335
336 struct i596_cmd set_add;
337 char eth_addr[8]; /* directly follows set_add */
338
339 struct i596_cmd set_conf;
340 char i596_config[16]; /* directly follows set_conf */
341
342 struct i596_cmd tdr;
343 unsigned long tdr_stat; /* directly follows tdr */
344
345 int last_restart;
346 struct i596_rbd *rbd_list;
347 struct i596_rbd *rbd_tail;
348 struct i596_rfd *rx_tail;
349 struct i596_cmd *cmd_tail;
350 struct i596_cmd *cmd_head;
351 int cmd_backlog;
352 unsigned long last_cmd;
353 spinlock_t cmd_lock;
354 };
355
356 static char init_setup[14] = {
357 0x8E, /* length 14 bytes, prefetch on */
358 0xC8, /* default: fifo to 8, monitor off */
359 0x40, /* default: don't save bad frames (apricot.c had 0x80) */
360 0x2E, /* (default is 0x26)
361 No source address insertion, 8 byte preamble */
362 0x00, /* default priority and backoff */
363 0x60, /* default interframe spacing */
364 0x00, /* default slot time LSB */
365 0xf2, /* default slot time and nr of retries */
366 0x00, /* default various bits
367 (0: promiscuous mode, 1: broadcast disable,
368 2: encoding mode, 3: transmit on no CRS,
369 4: no CRC insertion, 5: CRC type,
370 6: bit stuffing, 7: padding) */
371 0x00, /* default carrier sense and collision detect */
372 0x40, /* default minimum frame length */
373 0xff, /* (default is 0xff, and that is what apricot.c has;
374 elp486.c has 0xfb: Enable crc append in memory.) */
375 0x00, /* default: not full duplex */
376 0x7f /* (default is 0x3f) multi IA */
377 };
378
379 static int i596_open(struct net_device *dev);
380 static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
381 static irqreturn_t i596_interrupt(int irq, void *dev_id);
382 static int i596_close(struct net_device *dev);
383 static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
384 static void print_eth(char *);
385 static void set_multicast_list(struct net_device *dev);
386 static void i596_tx_timeout(struct net_device *dev);
387
388 static int
389 i596_timeout(struct net_device *dev, char *msg, int ct) {
390 struct i596_private *lp;
391 int boguscnt = ct;
392
393 lp = netdev_priv(dev);
394 while (lp->scb.command) {
395 if (--boguscnt == 0) {
396 printk("%s: %s timed out - stat %4.4x, cmd %4.4x\n",
397 dev->name, msg,
398 lp->scb.status, lp->scb.command);
399 return 1;
400 }
401 udelay(5);
402 barrier();
403 }
404 return 0;
405 }
406
407 static inline int
408 init_rx_bufs(struct net_device *dev, int num) {
409 struct i596_private *lp;
410 struct i596_rfd *rfd;
411 int i;
412 // struct i596_rbd *rbd;
413
414 lp = netdev_priv(dev);
415 lp->scb.pa_rfd = I596_NULL;
416
417 for (i = 0; i < num; i++) {
418 rfd = kmalloc(sizeof(struct i596_rfd), GFP_KERNEL);
419 if (rfd == NULL)
420 break;
421
422 rfd->stat = 0;
423 rfd->pa_rbd = I596_NULL;
424 rfd->count = 0;
425 rfd->size = 1532;
426 if (i == 0) {
427 rfd->cmd = CMD_EOL;
428 lp->rx_tail = rfd;
429 } else {
430 rfd->cmd = 0;
431 }
432 rfd->pa_next = lp->scb.pa_rfd;
433 lp->scb.pa_rfd = va_to_pa(rfd);
434 lp->rx_tail->pa_next = lp->scb.pa_rfd;
435 }
436
437 #if 0
438 for (i = 0; i<RX_RBD_SIZE; i++) {
439 rbd = kmalloc(sizeof(struct i596_rbd), GFP_KERNEL);
440 if (rbd) {
441 rbd->pad = 0;
442 rbd->count = 0;
443 rbd->skb = dev_alloc_skb(RX_SKBSIZE);
444 if (!rbd->skb) {
445 printk("dev_alloc_skb failed");
446 }
447 rbd->next = rfd->rbd;
448 if (i) {
449 rfd->rbd->prev = rbd;
450 rbd->size = RX_SKBSIZE;
451 } else {
452 rbd->size = (RX_SKBSIZE | RBD_EL);
453 lp->rbd_tail = rbd;
454 }
455
456 rfd->rbd = rbd;
457 } else {
458 printk("Could not kmalloc rbd\n");
459 }
460 }
461 lp->rbd_tail->next = rfd->rbd;
462 #endif
463 return i;
464 }
465
466 static inline void
467 remove_rx_bufs(struct net_device *dev) {
468 struct i596_private *lp;
469 struct i596_rfd *rfd;
470
471 lp = netdev_priv(dev);
472 lp->rx_tail->pa_next = I596_NULL;
473
474 do {
475 rfd = pa_to_va(lp->scb.pa_rfd);
476 lp->scb.pa_rfd = rfd->pa_next;
477 kfree(rfd);
478 } while (rfd != lp->rx_tail);
479
480 lp->rx_tail = NULL;
481
482 #if 0
483 for (lp->rbd_list) {
484 }
485 #endif
486 }
487
488 #define PORT_RESET 0x00 /* reset 82596 */
489 #define PORT_SELFTEST 0x01 /* selftest */
490 #define PORT_ALTSCP 0x02 /* alternate SCB address */
491 #define PORT_DUMP 0x03 /* dump */
492
493 #define IOADDR 0xcb0 /* real constant */
494 #define IRQ 10 /* default IRQ - can be changed by ECU */
495
496 /* The 82596 requires two 16-bit write cycles for a port command */
497 static inline void
498 PORT(phys_addr a, unsigned int cmd) {
499 if (a & 0xf)
500 printk("lp486e.c: PORT: address not aligned\n");
501 outw(((a & 0xffff) | cmd), IOADDR);
502 outw(((a>>16) & 0xffff), IOADDR+2);
503 }
504
505 static inline void
506 CA(void) {
507 outb(0, IOADDR+4);
508 udelay(8);
509 }
510
511 static inline void
512 CLEAR_INT(void) {
513 outb(0, IOADDR+8);
514 }
515
516 #if 0
517 /* selftest or dump */
518 static void
519 i596_port_do(struct net_device *dev, int portcmd, char *cmdname) {
520 struct i596_private *lp = netdev_priv(dev);
521 u16 *outp;
522 int i, m;
523
524 memset((void *)&(lp->dump), 0, sizeof(struct i596_dump));
525 outp = &(lp->dump.dump[0]);
526
527 PORT(va_to_pa(outp), portcmd);
528 mdelay(30); /* random, unmotivated */
529
530 printk("lp486e i82596 %s result:\n", cmdname);
531 for (m = ARRAY_SIZE(lp->dump.dump); m && lp->dump.dump[m-1] == 0; m--)
532 ;
533 for (i = 0; i < m; i++) {
534 printk(" %04x", lp->dump.dump[i]);
535 if (i%8 == 7)
536 printk("\n");
537 }
538 printk("\n");
539 }
540 #endif
541
542 static int
543 i596_scp_setup(struct net_device *dev) {
544 struct i596_private *lp = netdev_priv(dev);
545 int boguscnt;
546
547 /* Setup SCP, ISCP, SCB */
548 /*
549 * sysbus bits:
550 * only a single byte is significant - here 0x44
551 * 0x80: big endian mode (details depend on stepping)
552 * 0x40: 1
553 * 0x20: interrupt pin is active low
554 * 0x10: lock function disabled
555 * 0x08: external triggering of bus throttle timers
556 * 0x06: 00: 82586 compat mode, 01: segmented mode, 10: linear mode
557 * 0x01: unused
558 */
559 lp->scp.sysbus = 0x00440000; /* linear mode */
560 lp->scp.pad = 0; /* must be zero */
561 lp->scp.pa_iscp = va_to_pa(&(lp->iscp));
562
563 /*
564 * The CPU sets the ISCP to 1 before it gives the first CA()
565 */
566 lp->iscp.busy = 0x0001;
567 lp->iscp.pa_scb = va_to_pa(&(lp->scb));
568
569 lp->scb.command = 0;
570 lp->scb.status = 0;
571 lp->scb.pa_cmd = I596_NULL;
572 /* lp->scb.pa_rfd has been initialised already */
573
574 lp->last_cmd = jiffies;
575 lp->cmd_backlog = 0;
576 lp->cmd_head = NULL;
577
578 /*
579 * Reset the 82596.
580 * We need to wait 10 systemclock cycles, and
581 * 5 serial clock cycles.
582 */
583 PORT(0, PORT_RESET); /* address part ignored */
584 udelay(100);
585
586 /*
587 * Before the CA signal is asserted, the default SCP address
588 * (0x00fffff4) can be changed to a 16-byte aligned value
589 */
590 PORT(va_to_pa(&lp->scp), PORT_ALTSCP); /* change the scp address */
591
592 /*
593 * The initialization procedure begins when a
594 * Channel Attention signal is asserted after a reset.
595 */
596
597 CA();
598
599 /*
600 * The ISCP busy is cleared by the 82596 after the SCB address is read.
601 */
602 boguscnt = 100;
603 while (lp->iscp.busy) {
604 if (--boguscnt == 0) {
605 /* No i82596 present? */
606 printk("%s: i82596 initialization timed out\n",
607 dev->name);
608 return 1;
609 }
610 udelay(5);
611 barrier();
612 }
613 /* I find here boguscnt==100, so no delay was required. */
614
615 return 0;
616 }
617
618 static int
619 init_i596(struct net_device *dev) {
620 struct i596_private *lp;
621
622 if (i596_scp_setup(dev))
623 return 1;
624
625 lp = netdev_priv(dev);
626 lp->scb.command = 0;
627
628 memcpy ((void *)lp->i596_config, init_setup, 14);
629 lp->set_conf.command = CmdConfigure;
630 i596_add_cmd(dev, (void *)&lp->set_conf);
631
632 memcpy ((void *)lp->eth_addr, dev->dev_addr, 6);
633 lp->set_add.command = CmdIASetup;
634 i596_add_cmd(dev, (struct i596_cmd *)&lp->set_add);
635
636 lp->tdr.command = CmdTDR;
637 i596_add_cmd(dev, (struct i596_cmd *)&lp->tdr);
638
639 if (lp->scb.command && i596_timeout(dev, "i82596 init", 200))
640 return 1;
641
642 lp->scb.command = RX_START;
643 CA();
644
645 barrier();
646
647 if (lp->scb.command && i596_timeout(dev, "Receive Unit start", 100))
648 return 1;
649
650 return 0;
651 }
652
653 /* Receive a single frame */
654 static inline int
655 i596_rx_one(struct net_device *dev, struct i596_private *lp,
656 struct i596_rfd *rfd, int *frames) {
657
658 if (rfd->stat & RFD_STAT_OK) {
659 /* a good frame */
660 int pkt_len = (rfd->count & 0x3fff);
661 struct sk_buff *skb = dev_alloc_skb(pkt_len);
662
663 (*frames)++;
664
665 if (rfd->cmd & CMD_EOL)
666 printk("Received on EOL\n");
667
668 if (skb == NULL) {
669 printk ("%s: i596_rx Memory squeeze, "
670 "dropping packet.\n", dev->name);
671 dev->stats.rx_dropped++;
672 return 1;
673 }
674
675 memcpy(skb_put(skb,pkt_len), rfd->data, pkt_len);
676
677 skb->protocol = eth_type_trans(skb,dev);
678 netif_rx(skb);
679 dev->stats.rx_packets++;
680 } else {
681 #if 0
682 printk("Frame reception error status %04x\n",
683 rfd->stat);
684 #endif
685 dev->stats.rx_errors++;
686 if (rfd->stat & RFD_COLLISION)
687 dev->stats.collisions++;
688 if (rfd->stat & RFD_SHORT_FRAME_ERR)
689 dev->stats.rx_length_errors++;
690 if (rfd->stat & RFD_DMA_ERR)
691 dev->stats.rx_over_errors++;
692 if (rfd->stat & RFD_NOBUFS_ERR)
693 dev->stats.rx_fifo_errors++;
694 if (rfd->stat & RFD_ALIGN_ERR)
695 dev->stats.rx_frame_errors++;
696 if (rfd->stat & RFD_CRC_ERR)
697 dev->stats.rx_crc_errors++;
698 if (rfd->stat & RFD_LENGTH_ERR)
699 dev->stats.rx_length_errors++;
700 }
701 rfd->stat = rfd->count = 0;
702 return 0;
703 }
704
705 static int
706 i596_rx(struct net_device *dev) {
707 struct i596_private *lp = netdev_priv(dev);
708 struct i596_rfd *rfd;
709 int frames = 0;
710
711 while (1) {
712 rfd = pa_to_va(lp->scb.pa_rfd);
713 if (!rfd) {
714 printk(KERN_ERR "i596_rx: NULL rfd?\n");
715 return 0;
716 }
717 #if 1
718 if (rfd->stat && !(rfd->stat & (RFD_STAT_C | RFD_STAT_B)))
719 printk("SF:%p-%04x\n", rfd, rfd->stat);
720 #endif
721 if (!(rfd->stat & RFD_STAT_C))
722 break; /* next one not ready */
723 if (i596_rx_one(dev, lp, rfd, &frames))
724 break; /* out of memory */
725 rfd->cmd = CMD_EOL;
726 lp->rx_tail->cmd = 0;
727 lp->rx_tail = rfd;
728 lp->scb.pa_rfd = rfd->pa_next;
729 barrier();
730 }
731
732 return frames;
733 }
734
735 static void
736 i596_cleanup_cmd(struct net_device *dev) {
737 struct i596_private *lp;
738 struct i596_cmd *cmd;
739
740 lp = netdev_priv(dev);
741 while (lp->cmd_head) {
742 cmd = (struct i596_cmd *)lp->cmd_head;
743
744 lp->cmd_head = pa_to_va(lp->cmd_head->pa_next);
745 lp->cmd_backlog--;
746
747 switch ((cmd->command) & 0x7) {
748 case CmdTx: {
749 struct tx_cmd *tx_cmd = (struct tx_cmd *) cmd;
750 struct i596_tbd * tx_cmd_tbd;
751 tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd);
752
753 dev_kfree_skb_any(tx_cmd_tbd->skb);
754
755 dev->stats.tx_errors++;
756 dev->stats.tx_aborted_errors++;
757
758 cmd->pa_next = I596_NULL;
759 kfree((unsigned char *)tx_cmd);
760 netif_wake_queue(dev);
761 break;
762 }
763 case CmdMulticastList: {
764 // unsigned short count = *((unsigned short *) (ptr + 1));
765
766 cmd->pa_next = I596_NULL;
767 kfree((unsigned char *)cmd);
768 break;
769 }
770 default: {
771 cmd->pa_next = I596_NULL;
772 break;
773 }
774 }
775 barrier();
776 }
777
778 if (lp->scb.command && i596_timeout(dev, "i596_cleanup_cmd", 100))
779 ;
780
781 lp->scb.pa_cmd = va_to_pa(lp->cmd_head);
782 }
783
784 static void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) {
785
786 if (lp->scb.command && i596_timeout(dev, "i596_reset", 100))
787 ;
788
789 netif_stop_queue(dev);
790
791 lp->scb.command = CUC_ABORT | RX_ABORT;
792 CA();
793 barrier();
794
795 /* wait for shutdown */
796 if (lp->scb.command && i596_timeout(dev, "i596_reset(2)", 400))
797 ;
798
799 i596_cleanup_cmd(dev);
800 i596_rx(dev);
801
802 netif_start_queue(dev);
803 /*dev_kfree_skb(skb, FREE_WRITE);*/
804 init_i596(dev);
805 }
806
807 static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) {
808 struct i596_private *lp = netdev_priv(dev);
809 int ioaddr = dev->base_addr;
810 unsigned long flags;
811
812 cmd->status = 0;
813 cmd->command |= (CMD_EOL | CMD_INTR);
814 cmd->pa_next = I596_NULL;
815
816 spin_lock_irqsave(&lp->cmd_lock, flags);
817
818 if (lp->cmd_head) {
819 lp->cmd_tail->pa_next = va_to_pa(cmd);
820 } else {
821 lp->cmd_head = cmd;
822 if (lp->scb.command && i596_timeout(dev, "i596_add_cmd", 100))
823 ;
824 lp->scb.pa_cmd = va_to_pa(cmd);
825 lp->scb.command = CUC_START;
826 CA();
827 }
828 lp->cmd_tail = cmd;
829 lp->cmd_backlog++;
830
831 lp->cmd_head = pa_to_va(lp->scb.pa_cmd);
832 spin_unlock_irqrestore(&lp->cmd_lock, flags);
833
834 if (lp->cmd_backlog > 16) {
835 int tickssofar = jiffies - lp->last_cmd;
836 if (tickssofar < HZ/4)
837 return;
838
839 printk(KERN_WARNING "%s: command unit timed out, status resetting.\n", dev->name);
840 i596_reset(dev, lp, ioaddr);
841 }
842 }
843
844 static int i596_open(struct net_device *dev)
845 {
846 int i;
847
848 i = request_irq(dev->irq, i596_interrupt, IRQF_SHARED, dev->name, dev);
849 if (i) {
850 printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
851 return i;
852 }
853
854 if ((i = init_rx_bufs(dev, RX_RING_SIZE)) < RX_RING_SIZE)
855 printk(KERN_ERR "%s: only able to allocate %d receive buffers\n", dev->name, i);
856
857 if (i < 4) {
858 free_irq(dev->irq, dev);
859 return -EAGAIN;
860 }
861 netif_start_queue(dev);
862 init_i596(dev);
863 return 0; /* Always succeed */
864 }
865
866 static netdev_tx_t i596_start_xmit (struct sk_buff *skb, struct net_device *dev) {
867 struct tx_cmd *tx_cmd;
868 short length;
869
870 length = skb->len;
871
872 if (length < ETH_ZLEN) {
873 if (skb_padto(skb, ETH_ZLEN))
874 return NETDEV_TX_OK;
875 length = ETH_ZLEN;
876 }
877
878 tx_cmd = kmalloc((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC);
879 if (tx_cmd == NULL) {
880 printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name);
881 dev->stats.tx_dropped++;
882 dev_kfree_skb (skb);
883 } else {
884 struct i596_tbd *tx_cmd_tbd;
885 tx_cmd_tbd = (struct i596_tbd *) (tx_cmd + 1);
886 tx_cmd->pa_tbd = va_to_pa (tx_cmd_tbd);
887 tx_cmd_tbd->pa_next = I596_NULL;
888
889 tx_cmd->cmd.command = (CMD_FLEX | CmdTx);
890
891 tx_cmd->pad = 0;
892 tx_cmd->size = 0;
893 tx_cmd_tbd->pad = 0;
894 tx_cmd_tbd->size = (EOF | length);
895
896 tx_cmd_tbd->pa_data = va_to_pa (skb->data);
897 tx_cmd_tbd->skb = skb;
898
899 if (i596_debug & LOG_SRCDST)
900 print_eth (skb->data);
901
902 i596_add_cmd (dev, (struct i596_cmd *) tx_cmd);
903
904 dev->stats.tx_packets++;
905 }
906
907 return NETDEV_TX_OK;
908 }
909
910 static void
911 i596_tx_timeout (struct net_device *dev) {
912 struct i596_private *lp = netdev_priv(dev);
913 int ioaddr = dev->base_addr;
914
915 /* Transmitter timeout, serious problems. */
916 printk(KERN_WARNING "%s: transmit timed out, status resetting.\n", dev->name);
917 dev->stats.tx_errors++;
918
919 /* Try to restart the adaptor */
920 if (lp->last_restart == dev->stats.tx_packets) {
921 printk ("Resetting board.\n");
922
923 /* Shutdown and restart */
924 i596_reset (dev, lp, ioaddr);
925 } else {
926 /* Issue a channel attention signal */
927 printk ("Kicking board.\n");
928 lp->scb.command = (CUC_START | RX_START);
929 CA();
930 lp->last_restart = dev->stats.tx_packets;
931 }
932 netif_wake_queue(dev);
933 }
934
935 static void print_eth(char *add)
936 {
937 int i;
938
939 printk ("Dest ");
940 for (i = 0; i < 6; i++)
941 printk(" %2.2X", (unsigned char) add[i]);
942 printk ("\n");
943
944 printk ("Source");
945 for (i = 0; i < 6; i++)
946 printk(" %2.2X", (unsigned char) add[i+6]);
947 printk ("\n");
948
949 printk ("type %2.2X%2.2X\n",
950 (unsigned char) add[12], (unsigned char) add[13]);
951 }
952
953 static const struct net_device_ops i596_netdev_ops = {
954 .ndo_open = i596_open,
955 .ndo_stop = i596_close,
956 .ndo_start_xmit = i596_start_xmit,
957 .ndo_set_multicast_list = set_multicast_list,
958 .ndo_tx_timeout = i596_tx_timeout,
959 .ndo_change_mtu = eth_change_mtu,
960 .ndo_set_mac_address = eth_mac_addr,
961 .ndo_validate_addr = eth_validate_addr,
962 };
963
964 static int __init lp486e_probe(struct net_device *dev) {
965 struct i596_private *lp;
966 unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 };
967 unsigned char *bios;
968 int i, j;
969 int ret = -ENOMEM;
970 static int probed;
971
972 if (probed)
973 return -ENODEV;
974 probed++;
975
976 if (!request_region(IOADDR, LP486E_TOTAL_SIZE, DRV_NAME)) {
977 printk(KERN_ERR "lp486e: IO address 0x%x in use\n", IOADDR);
978 return -EBUSY;
979 }
980
981 lp = netdev_priv(dev);
982 spin_lock_init(&lp->cmd_lock);
983
984 /*
985 * Do we really have this thing?
986 */
987 if (i596_scp_setup(dev)) {
988 ret = -ENODEV;
989 goto err_out_kfree;
990 }
991
992 dev->base_addr = IOADDR;
993 dev->irq = IRQ;
994
995
996 /*
997 * How do we find the ethernet address? I don't know.
998 * One possibility is to look at the EISA configuration area
999 * [0xe8000-0xe9fff]. This contains the ethernet address
1000 * but not at a fixed address - things depend on setup options.
1001 *
1002 * If we find no address, or the wrong address, use
1003 * ifconfig eth0 hw ether a1:a2:a3:a4:a5:a6
1004 * with the value found in the BIOS setup.
1005 */
1006 bios = bus_to_virt(0xe8000);
1007 for (j = 0; j < 0x2000; j++) {
1008 if (bios[j] == 0 && bios[j+1] == 0xaa && bios[j+2] == 0) {
1009 printk("%s: maybe address at BIOS 0x%x:",
1010 dev->name, 0xe8000+j);
1011 for (i = 0; i < 6; i++) {
1012 eth_addr[i] = bios[i+j];
1013 printk(" %2.2X", eth_addr[i]);
1014 }
1015 printk("\n");
1016 }
1017 }
1018
1019 printk("%s: lp486e 82596 at %#3lx, IRQ %d,",
1020 dev->name, dev->base_addr, dev->irq);
1021 for (i = 0; i < 6; i++)
1022 printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]);
1023 printk("\n");
1024
1025 /* The LP486E-specific entries in the device structure. */
1026 dev->netdev_ops = &i596_netdev_ops;
1027 dev->watchdog_timeo = 5*HZ;
1028
1029 #if 0
1030 /* selftest reports 0x320925ae - don't know what that means */
1031 i596_port_do(dev, PORT_SELFTEST, "selftest");
1032 i596_port_do(dev, PORT_DUMP, "dump");
1033 #endif
1034 return 0;
1035
1036 err_out_kfree:
1037 release_region(IOADDR, LP486E_TOTAL_SIZE);
1038 return ret;
1039 }
1040
1041 static inline void
1042 i596_handle_CU_completion(struct net_device *dev,
1043 struct i596_private *lp,
1044 unsigned short status,
1045 unsigned short *ack_cmdp) {
1046 struct i596_cmd *cmd;
1047 int frames_out = 0;
1048 int commands_done = 0;
1049 int cmd_val;
1050 unsigned long flags;
1051
1052 spin_lock_irqsave(&lp->cmd_lock, flags);
1053 cmd = lp->cmd_head;
1054
1055 while (lp->cmd_head && (lp->cmd_head->status & CMD_STAT_C)) {
1056 cmd = lp->cmd_head;
1057
1058 lp->cmd_head = pa_to_va(lp->cmd_head->pa_next);
1059 lp->cmd_backlog--;
1060
1061 commands_done++;
1062 cmd_val = cmd->command & 0x7;
1063 #if 0
1064 printk("finished CU %s command (%d)\n",
1065 CUcmdnames[cmd_val], cmd_val);
1066 #endif
1067 switch (cmd_val) {
1068 case CmdTx:
1069 {
1070 struct tx_cmd *tx_cmd;
1071 struct i596_tbd *tx_cmd_tbd;
1072
1073 tx_cmd = (struct tx_cmd *) cmd;
1074 tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd);
1075
1076 frames_out++;
1077 if (cmd->status & CMD_STAT_OK) {
1078 if (i596_debug)
1079 print_eth(pa_to_va(tx_cmd_tbd->pa_data));
1080 } else {
1081 dev->stats.tx_errors++;
1082 if (i596_debug)
1083 printk("transmission failure:%04x\n",
1084 cmd->status);
1085 if (cmd->status & 0x0020)
1086 dev->stats.collisions++;
1087 if (!(cmd->status & 0x0040))
1088 dev->stats.tx_heartbeat_errors++;
1089 if (cmd->status & 0x0400)
1090 dev->stats.tx_carrier_errors++;
1091 if (cmd->status & 0x0800)
1092 dev->stats.collisions++;
1093 if (cmd->status & 0x1000)
1094 dev->stats.tx_aborted_errors++;
1095 }
1096 dev_kfree_skb_irq(tx_cmd_tbd->skb);
1097
1098 cmd->pa_next = I596_NULL;
1099 kfree((unsigned char *)tx_cmd);
1100 netif_wake_queue(dev);
1101 break;
1102 }
1103
1104 case CmdMulticastList:
1105 cmd->pa_next = I596_NULL;
1106 kfree((unsigned char *)cmd);
1107 break;
1108
1109 case CmdTDR:
1110 {
1111 unsigned long status = *((unsigned long *) (cmd + 1));
1112 if (status & 0x8000) {
1113 if (i596_debug)
1114 printk("%s: link ok.\n", dev->name);
1115 } else {
1116 if (status & 0x4000)
1117 printk("%s: Transceiver problem.\n",
1118 dev->name);
1119 if (status & 0x2000)
1120 printk("%s: Termination problem.\n",
1121 dev->name);
1122 if (status & 0x1000)
1123 printk("%s: Short circuit.\n",
1124 dev->name);
1125 printk("%s: Time %ld.\n",
1126 dev->name, status & 0x07ff);
1127 }
1128 }
1129 default:
1130 cmd->pa_next = I596_NULL;
1131 lp->last_cmd = jiffies;
1132
1133 }
1134 barrier();
1135 }
1136
1137 cmd = lp->cmd_head;
1138 while (cmd && (cmd != lp->cmd_tail)) {
1139 cmd->command &= 0x1fff;
1140 cmd = pa_to_va(cmd->pa_next);
1141 barrier();
1142 }
1143
1144 if (lp->cmd_head)
1145 *ack_cmdp |= CUC_START;
1146 lp->scb.pa_cmd = va_to_pa(lp->cmd_head);
1147 spin_unlock_irqrestore(&lp->cmd_lock, flags);
1148 }
1149
1150 static irqreturn_t
1151 i596_interrupt(int irq, void *dev_instance)
1152 {
1153 struct net_device *dev = dev_instance;
1154 struct i596_private *lp = netdev_priv(dev);
1155 unsigned short status, ack_cmd = 0;
1156 int frames_in = 0;
1157
1158 /*
1159 * The 82596 examines the command, performs the required action,
1160 * and then clears the SCB command word.
1161 */
1162 if (lp->scb.command && i596_timeout(dev, "interrupt", 40))
1163 ;
1164
1165 /*
1166 * The status word indicates the status of the 82596.
1167 * It is modified only by the 82596.
1168 *
1169 * [So, we must not clear it. I find often status 0xffff,
1170 * which is not one of the values allowed by the docs.]
1171 */
1172 status = lp->scb.status;
1173 #if 0
1174 if (i596_debug) {
1175 printk("%s: i596 interrupt, ", dev->name);
1176 i596_out_status(status);
1177 }
1178 #endif
1179 /* Impossible, but it happens - perhaps when we get
1180 a receive interrupt but scb.pa_rfd is I596_NULL. */
1181 if (status == 0xffff) {
1182 printk("%s: i596_interrupt: got status 0xffff\n", dev->name);
1183 goto out;
1184 }
1185
1186 ack_cmd = (status & STAT_ACK);
1187
1188 if (status & (STAT_CX | STAT_CNA))
1189 i596_handle_CU_completion(dev, lp, status, &ack_cmd);
1190
1191 if (status & (STAT_FR | STAT_RNR)) {
1192 /* Restart the receive unit when it got inactive somehow */
1193 if ((status & STAT_RNR) && netif_running(dev))
1194 ack_cmd |= RX_START;
1195
1196 if (status & STAT_FR) {
1197 frames_in = i596_rx(dev);
1198 if (!frames_in)
1199 printk("receive frame reported, but no frames\n");
1200 }
1201 }
1202
1203 /* acknowledge the interrupt */
1204 /*
1205 if ((lp->scb.pa_cmd != I596_NULL) && netif_running(dev))
1206 ack_cmd |= CUC_START;
1207 */
1208
1209 if (lp->scb.command && i596_timeout(dev, "i596 interrupt", 100))
1210 ;
1211
1212 lp->scb.command = ack_cmd;
1213
1214 CLEAR_INT();
1215 CA();
1216
1217 out:
1218 return IRQ_HANDLED;
1219 }
1220
1221 static int i596_close(struct net_device *dev) {
1222 struct i596_private *lp = netdev_priv(dev);
1223
1224 netif_stop_queue(dev);
1225
1226 if (i596_debug)
1227 printk("%s: Shutting down ethercard, status was %4.4x.\n",
1228 dev->name, lp->scb.status);
1229
1230 lp->scb.command = (CUC_ABORT | RX_ABORT);
1231 CA();
1232
1233 i596_cleanup_cmd(dev);
1234
1235 if (lp->scb.command && i596_timeout(dev, "i596_close", 200))
1236 ;
1237
1238 free_irq(dev->irq, dev);
1239 remove_rx_bufs(dev);
1240
1241 return 0;
1242 }
1243
1244 /*
1245 * Set or clear the multicast filter for this adaptor.
1246 */
1247
1248 static void set_multicast_list(struct net_device *dev) {
1249 struct i596_private *lp = netdev_priv(dev);
1250 struct i596_cmd *cmd;
1251
1252 if (i596_debug > 1)
1253 printk ("%s: set multicast list %d\n",
1254 dev->name, netdev_mc_count(dev));
1255
1256 if (!netdev_mc_empty(dev)) {
1257 struct netdev_hw_addr *ha;
1258 char *cp;
1259 cmd = kmalloc(sizeof(struct i596_cmd) + 2 +
1260 netdev_mc_count(dev) * 6, GFP_ATOMIC);
1261 if (cmd == NULL) {
1262 printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name);
1263 return;
1264 }
1265 cmd->command = CmdMulticastList;
1266 *((unsigned short *) (cmd + 1)) = netdev_mc_count(dev) * 6;
1267 cp = ((char *)(cmd + 1))+2;
1268 netdev_for_each_mc_addr(ha, dev) {
1269 memcpy(cp, ha->addr, 6);
1270 cp += 6;
1271 }
1272 if (i596_debug & LOG_SRCDST)
1273 print_eth (((char *)(cmd + 1)) + 2);
1274 i596_add_cmd(dev, cmd);
1275 } else {
1276 if (lp->set_conf.pa_next != I596_NULL) {
1277 return;
1278 }
1279 if (netdev_mc_empty(dev) &&
1280 !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) {
1281 lp->i596_config[8] &= ~0x01;
1282 } else {
1283 lp->i596_config[8] |= 0x01;
1284 }
1285
1286 i596_add_cmd(dev, (struct i596_cmd *) &lp->set_conf);
1287 }
1288 }
1289
1290 MODULE_AUTHOR("Ard van Breemen <ard@cstmel.nl.eu.org>");
1291 MODULE_DESCRIPTION("Intel Panther onboard i82596 driver");
1292 MODULE_LICENSE("GPL");
1293
1294 static struct net_device *dev_lp486e;
1295 static int full_duplex;
1296 static int options;
1297 static int io = IOADDR;
1298 static int irq = IRQ;
1299
1300 module_param(debug, int, 0);
1301 //module_param(max_interrupt_work, int, 0);
1302 //module_param(reverse_probe, int, 0);
1303 //module_param(rx_copybreak, int, 0);
1304 module_param(options, int, 0);
1305 module_param(full_duplex, int, 0);
1306
1307 static int __init lp486e_init_module(void) {
1308 int err;
1309 struct net_device *dev = alloc_etherdev(sizeof(struct i596_private));
1310 if (!dev)
1311 return -ENOMEM;
1312
1313 dev->irq = irq;
1314 dev->base_addr = io;
1315 err = lp486e_probe(dev);
1316 if (err) {
1317 free_netdev(dev);
1318 return err;
1319 }
1320 err = register_netdev(dev);
1321 if (err) {
1322 release_region(dev->base_addr, LP486E_TOTAL_SIZE);
1323 free_netdev(dev);
1324 return err;
1325 }
1326 dev_lp486e = dev;
1327 full_duplex = 0;
1328 options = 0;
1329 return 0;
1330 }
1331
1332 static void __exit lp486e_cleanup_module(void) {
1333 unregister_netdev(dev_lp486e);
1334 release_region(dev_lp486e->base_addr, LP486E_TOTAL_SIZE);
1335 free_netdev(dev_lp486e);
1336 }
1337
1338 module_init(lp486e_init_module);
1339 module_exit(lp486e_cleanup_module);
kernel source for telekom puls (alcatel/mediatek)